mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L476RG/stm32l4xx_ll_gpio.h
- Revision:
- 122:f9eeca106725
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L476RG/stm32l4xx_ll_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_ll_gpio.h Thu Jul 07 14:34:11 2016 +0100
@@ -0,0 +1,1067 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_gpio.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of GPIO LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_GPIO_H
+#define __STM32L4xx_LL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI)
+
+/** @defgroup GPIO_LL GPIO
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_Private_Macros GPIO Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_ES_INIT GPIO Exported Init structures
+ * @{
+ */
+
+/**
+ * @brief LL GPIO Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_LL_EC_PIN */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_MODE.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinMode().*/
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_SPEED.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinSpeed().*/
+
+ uint32_t OutputType; /*!< Specifies the operating output type for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_OUTPUT.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinOutputType().*/
+
+ uint32_t Pull; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_PULL.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetPinPull().*/
+
+ uint32_t Alternate; /*!< Specifies the Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_LL_EC_AF.
+
+ GPIO HW configuration can be modified afterwards using unitary function @ref LL_GPIO_SetAFPin_0_7() and LL_GPIO_SetAFPin_8_15().*/
+} LL_GPIO_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EC_PIN PIN
+ * @{
+ */
+#define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */
+#define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */
+#define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */
+#define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */
+#define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */
+#define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */
+#define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */
+#define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */
+#define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */
+#define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */
+#define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */
+#define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */
+#define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */
+#define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */
+#define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */
+#define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */
+#define LL_GPIO_PIN_ALL (GPIO_BSRR_BS0 | GPIO_BSRR_BS1 | GPIO_BSRR_BS2 | \
+ GPIO_BSRR_BS3 | GPIO_BSRR_BS4 | GPIO_BSRR_BS5 | \
+ GPIO_BSRR_BS6 | GPIO_BSRR_BS7 | GPIO_BSRR_BS8 | \
+ GPIO_BSRR_BS9 | GPIO_BSRR_BS10 | GPIO_BSRR_BS11 | \
+ GPIO_BSRR_BS12 | GPIO_BSRR_BS13 | GPIO_BSRR_BS14 | \
+ GPIO_BSRR_BS15) /*!< Select all pins */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_MODE Mode
+ * @{
+ */
+#define LL_GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Select input mode */
+#define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */
+#define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */
+#define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_OUTPUT Output Type
+ * @{
+ */
+#define LL_GPIO_OUTPUT_PUSHPULL ((uint32_t)0x00000000U) /*!< Select push-pull as output type */
+#define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_SPEED Output Speed
+ * @{
+ */
+#define LL_GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Select I/O low output speed */
+#define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDR_OSPEED0_0 /*!< Select I/O medium output speed */
+#define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDR_OSPEED0_1 /*!< Select I/O fast output speed */
+#define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDR_OSPEED0 /*!< Select I/O high output speed */
+/**
+ * @}
+ */
+#define LL_GPIO_SPEED_LOW LL_GPIO_SPEED_FREQ_LOW
+#define LL_GPIO_SPEED_MEDIUM LL_GPIO_SPEED_FREQ_MEDIUM
+#define LL_GPIO_SPEED_FAST LL_GPIO_SPEED_FREQ_HIGH
+#define LL_GPIO_SPEED_HIGH LL_GPIO_SPEED_FREQ_VERY_HIGH
+
+
+/** @defgroup GPIO_LL_EC_PULL Pull Up Pull Down
+ * @{
+ */
+#define LL_GPIO_PULL_NO ((uint32_t)0x00000000U) /*!< Select I/O no pull */
+#define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */
+#define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EC_AF Alternate Function
+ * @{
+ */
+#define LL_GPIO_AF_0 ((uint32_t)0x0000000U) /*!< Select alternate function 0 */
+#define LL_GPIO_AF_1 ((uint32_t)0x0000001U) /*!< Select alternate function 1 */
+#define LL_GPIO_AF_2 ((uint32_t)0x0000002U) /*!< Select alternate function 2 */
+#define LL_GPIO_AF_3 ((uint32_t)0x0000003U) /*!< Select alternate function 3 */
+#define LL_GPIO_AF_4 ((uint32_t)0x0000004U) /*!< Select alternate function 4 */
+#define LL_GPIO_AF_5 ((uint32_t)0x0000005U) /*!< Select alternate function 5 */
+#define LL_GPIO_AF_6 ((uint32_t)0x0000006U) /*!< Select alternate function 6 */
+#define LL_GPIO_AF_7 ((uint32_t)0x0000007U) /*!< Select alternate function 7 */
+#define LL_GPIO_AF_8 ((uint32_t)0x0000008U) /*!< Select alternate function 8 */
+#define LL_GPIO_AF_9 ((uint32_t)0x0000009U) /*!< Select alternate function 9 */
+#define LL_GPIO_AF_10 ((uint32_t)0x000000AU) /*!< Select alternate function 10 */
+#define LL_GPIO_AF_11 ((uint32_t)0x000000BU) /*!< Select alternate function 11 */
+#define LL_GPIO_AF_12 ((uint32_t)0x000000CU) /*!< Select alternate function 12 */
+#define LL_GPIO_AF_13 ((uint32_t)0x000000DU) /*!< Select alternate function 13 */
+#define LL_GPIO_AF_14 ((uint32_t)0x000000EU) /*!< Select alternate function 14 */
+#define LL_GPIO_AF_15 ((uint32_t)0x000000FU) /*!< Select alternate function 15 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_GPIO_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in GPIO register
+ * @param __INSTANCE__ GPIO Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_GPIO_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_LL_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @defgroup GPIO_LL_EF_Port_Configuration Port Configuration
+ * @{
+ */
+
+/**
+ * @brief Configure gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_SetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Mode This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode)
+{
+ MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio mode for a dedicated pin on dedicated port.
+ * @note I/O mode can be Input mode, General purpose output, Alternate function mode or Analog.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll MODER MODEy LL_GPIO_GetPinMode
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_MODE_INPUT
+ * @arg @ref LL_GPIO_MODE_OUTPUT
+ * @arg @ref LL_GPIO_MODE_ALTERNATE
+ * @arg @ref LL_GPIO_MODE_ANALOG
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->MODER,
+ (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @rmtoll OTYPER OTy LL_GPIO_SetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @param OutputType This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType)
+{
+ MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType));
+}
+
+/**
+ * @brief Return gpio output type for several pins on dedicated port.
+ * @note Output type as to be set when gpio pin is in output or
+ * alternate modes. Possible type are Push-pull or Open-drain.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll OTYPER OTy LL_GPIO_GetPinOutputType
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_OUTPUT_PUSHPULL
+ * @arg @ref LL_GPIO_OUTPUT_OPENDRAIN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OTYPER, Pin) >> POSITION_VAL(Pin));
+}
+
+/**
+ * @brief Configure gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_SetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Speed This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed)
+{
+ MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U)),
+ (Speed << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio speed for a dedicated pin on dedicated port.
+ * @note I/O speed can be Low, Medium, Fast or High speed.
+ * @note Warning: only one pin can be passed as parameter.
+ * @note Refer to datasheet for frequency specifications and the power
+ * supply and load conditions for each speed.
+ * @rmtoll OSPEEDR OSPEEDy LL_GPIO_GetPinSpeed
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_SPEED_FREQ_LOW
+ * @arg @ref LL_GPIO_SPEED_FREQ_MEDIUM
+ * @arg @ref LL_GPIO_SPEED_FREQ_HIGH
+ * @arg @ref LL_GPIO_SPEED_FREQ_VERY_HIGH
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->OSPEEDR,
+ (GPIO_OSPEEDR_OSPEED0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio pull-up or pull-down for a dedicated pin on a dedicated port.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_SetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Pull This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull)
+{
+ MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U)));
+}
+
+/**
+ * @brief Return gpio pull-up or pull-down for a dedicated pin on a dedicated port
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll PUPDR PUPDy LL_GPIO_GetPinPull
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_PULL_NO
+ * @arg @ref LL_GPIO_PULL_UP
+ * @arg @ref LL_GPIO_PULL_DOWN
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->PUPDR,
+ (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U))) >> (POSITION_VAL(Pin) * 2U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRL AFSELy LL_GPIO_SetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)),
+ (Alternate << (POSITION_VAL(Pin) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 0 to 7 for a dedicated port.
+ * @rmtoll AFRL AFSELy LL_GPIO_GetAFPin_0_7
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[0],
+ (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U))) >> (POSITION_VAL(Pin) * 4U));
+}
+
+/**
+ * @brief Configure gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @note Warning: only one pin can be passed as parameter.
+ * @rmtoll AFRH AFSELy LL_GPIO_SetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @param Alternate This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate)
+{
+ MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)),
+ (Alternate << (POSITION_VAL(Pin >> 8U) * 4U)));
+}
+
+/**
+ * @brief Return gpio alternate function of a dedicated pin from 8 to 15 for a dedicated port.
+ * @note Possible values are from AF0 to AF15 depending on target.
+ * @rmtoll AFRH AFSELy LL_GPIO_GetAFPin_8_15
+ * @param GPIOx GPIO Port
+ * @param Pin This parameter can be one of the following values:
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_GPIO_AF_0
+ * @arg @ref LL_GPIO_AF_1
+ * @arg @ref LL_GPIO_AF_2
+ * @arg @ref LL_GPIO_AF_3
+ * @arg @ref LL_GPIO_AF_4
+ * @arg @ref LL_GPIO_AF_5
+ * @arg @ref LL_GPIO_AF_6
+ * @arg @ref LL_GPIO_AF_7
+ * @arg @ref LL_GPIO_AF_8
+ * @arg @ref LL_GPIO_AF_9
+ * @arg @ref LL_GPIO_AF_10
+ * @arg @ref LL_GPIO_AF_11
+ * @arg @ref LL_GPIO_AF_12
+ * @arg @ref LL_GPIO_AF_13
+ * @arg @ref LL_GPIO_AF_14
+ * @arg @ref LL_GPIO_AF_15
+ */
+__STATIC_INLINE uint32_t LL_GPIO_GetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin)
+{
+ return (uint32_t)(READ_BIT(GPIOx->AFR[1],
+ (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U))) >> (POSITION_VAL(Pin >> 8U) * 4U));
+}
+
+#if defined(GPIO_ASCR_ASC0)
+/**
+ * @brief Connect analog switch to ADC input of several pins for a dedicated port.
+ * @note This bit must be set prior to the ADC conversion.
+ * Only the IO which connected to the ADC input are effective.
+ * Other IO must be kept reset value
+ * @rmtoll ASCR ASCy LL_GPIO_EnablePinAnalogControl
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_EnablePinAnalogControl(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ SET_BIT(GPIOx->ASCR, PinMask);
+}
+
+/**
+ * @brief Disconnect analog switch to ADC input of several pins for a dedicated port.
+ * @rmtoll ASCR ASCy LL_GPIO_DisablePinAnalogControl
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_DisablePinAnalogControl(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ CLEAR_BIT(GPIOx->ASCR, PinMask);
+}
+#endif /* GPIO_ASCR_ASC0 */
+
+/**
+ * @brief Lock configuration of several pins for a dedicated port.
+ * @note When the lock sequence has been applied on a port bit, the
+ * value of this port bit can no longer be modified until the
+ * next reset.
+ * @note Each lock bit freezes a specific configuration register
+ * (control and alternate function registers).
+ * @rmtoll LCKR LCKK LL_GPIO_LockPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ __IO uint32_t temp;
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ WRITE_REG(GPIOx->LCKR, PinMask);
+ WRITE_REG(GPIOx->LCKR, GPIO_LCKR_LCKK | PinMask);
+ temp = READ_REG(GPIOx->LCKR);
+ (void) temp;
+}
+
+/**
+ * @brief Return 1 if all pins passed as parameter, of a dedicated port, are locked. else Return 0.
+ * @rmtoll LCKR LCKy LL_GPIO_IsPinLocked
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsPinLocked(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->LCKR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Return 1 if one of the pin of a dedicated port is locked. else return 0.
+ * @rmtoll LCKR LCKK LL_GPIO_IsAnyPinLocked
+ * @param GPIOx GPIO Port
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsAnyPinLocked(GPIO_TypeDef *GPIOx)
+{
+ return (READ_BIT(GPIOx->LCKR, GPIO_LCKR_LCKK) == (GPIO_LCKR_LCKK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_LL_EF_Data_Access Data Access
+ * @{
+ */
+
+/**
+ * @brief Return full input data register value for a dedicated port.
+ * @rmtoll IDR IDy LL_GPIO_ReadInputPort
+ * @param GPIOx GPIO Port
+ * @retval Input data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadInputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->IDR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll IDR IDy LL_GPIO_IsInputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsInputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->IDR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Write output data register for the port.
+ * @rmtoll ODR ODy LL_GPIO_WriteOutputPort
+ * @param GPIOx GPIO Port
+ * @param PortValue Level value for each pin of the port
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_WriteOutputPort(GPIO_TypeDef *GPIOx, uint32_t PortValue)
+{
+ WRITE_REG(GPIOx->ODR, PortValue);
+}
+
+/**
+ * @brief Return full output data register value for a dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_ReadOutputPort
+ * @param GPIOx GPIO Port
+ * @retval Output data register value of port
+ */
+__STATIC_INLINE uint32_t LL_GPIO_ReadOutputPort(GPIO_TypeDef *GPIOx)
+{
+ return (uint32_t)(READ_REG(GPIOx->ODR));
+}
+
+/**
+ * @brief Return if input data level for several pins of dedicated port is high or low.
+ * @rmtoll ODR ODy LL_GPIO_IsOutputPinSet
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_GPIO_IsOutputPinSet(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ return (READ_BIT(GPIOx->ODR, PinMask) == (PinMask));
+}
+
+/**
+ * @brief Set several pins to high level on dedicated gpio port.
+ * @rmtoll BSRR BSy LL_GPIO_SetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_SetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BSRR, PinMask);
+}
+
+/**
+ * @brief Set several pins to low level on dedicated gpio port.
+ * @rmtoll BRR BRy LL_GPIO_ResetOutputPin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_ResetOutputPin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->BRR, PinMask);
+}
+
+/**
+ * @brief Toggle data value for several pin of dedicated port.
+ * @rmtoll ODR ODy LL_GPIO_TogglePin
+ * @param GPIOx GPIO Port
+ * @param PinMask This parameter can be a combination of the following values:
+ * @arg @ref LL_GPIO_PIN_0
+ * @arg @ref LL_GPIO_PIN_1
+ * @arg @ref LL_GPIO_PIN_2
+ * @arg @ref LL_GPIO_PIN_3
+ * @arg @ref LL_GPIO_PIN_4
+ * @arg @ref LL_GPIO_PIN_5
+ * @arg @ref LL_GPIO_PIN_6
+ * @arg @ref LL_GPIO_PIN_7
+ * @arg @ref LL_GPIO_PIN_8
+ * @arg @ref LL_GPIO_PIN_9
+ * @arg @ref LL_GPIO_PIN_10
+ * @arg @ref LL_GPIO_PIN_11
+ * @arg @ref LL_GPIO_PIN_12
+ * @arg @ref LL_GPIO_PIN_13
+ * @arg @ref LL_GPIO_PIN_14
+ * @arg @ref LL_GPIO_PIN_15
+ * @arg @ref LL_GPIO_PIN_ALL
+ * @retval None
+ */
+__STATIC_INLINE void LL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint32_t PinMask)
+{
+ WRITE_REG(GPIOx->ODR, READ_REG(GPIOx->ODR) ^ PinMask);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup GPIO_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx);
+ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct);
+void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) || defined (GPIOG) || defined (GPIOH) || defined (GPIOI) */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
