Diff: TARGET_NUCLEO_L476RG/stm32l4xx_hal_gpio.h

Revision:

122:f9eeca106725

Parent:

107:4f6c30876dfa

diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L476RG/stm32l4xx_hal_gpio.h
--- a/TARGET_NUCLEO_L476RG/stm32l4xx_hal_gpio.h	Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_hal_gpio.h	Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
   ******************************************************************************
   * @file    stm32l4xx_hal_gpio.h
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    26-June-2015
+  * @version V1.5.1
+  * @date    31-May-2016
   * @brief   Header file of GPIO HAL module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -153,10 +153,10 @@
   * @brief GPIO Output Maximum frequency
   * @{
   */
-#define  GPIO_SPEED_LOW         ((uint32_t)0x00000000)  /*!< Low speed     */
-#define  GPIO_SPEED_MEDIUM      ((uint32_t)0x00000001)  /*!< Medium speed  */
-#define  GPIO_SPEED_FAST        ((uint32_t)0x00000002)  /*!< Fast speed    */
-#define  GPIO_SPEED_HIGH        ((uint32_t)0x00000003)  /*!< High speed    */
+#define  GPIO_SPEED_FREQ_LOW        ((uint32_t)0x00000000)   /*!< range up to 5 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_MEDIUM     ((uint32_t)0x00000001)   /*!< range  5 MHz to 25 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_HIGH       ((uint32_t)0x00000002)   /*!< range 25 MHz to 50 MHz, please refer to the product datasheet */
+#define  GPIO_SPEED_FREQ_VERY_HIGH  ((uint32_t)0x00000003)   /*!< range 50 MHz to 80 MHz, please refer to the product datasheet */
 /**
   * @}
   */
@@ -219,7 +219,7 @@
   *          This parameter can be GPIO_PIN_x where x can be(0..15)
   * @retval None
   */
-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__)  (EXTI->SWIER |= (__EXTI_LINE__))
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__)  (EXTI->SWIER1 |= (__EXTI_LINE__))
 
 /**
   * @}
@@ -247,10 +247,10 @@
                                      ((__MODE__) == GPIO_MODE_ANALOG)             ||\
                                      ((__MODE__) == GPIO_MODE_ANALOG_ADC_CONTROL))
 
-#define IS_GPIO_SPEED(__SPEED__)    (((__SPEED__) == GPIO_SPEED_LOW)    ||\
-                                     ((__SPEED__) == GPIO_SPEED_MEDIUM) ||\
-                                     ((__SPEED__) == GPIO_SPEED_FAST)   ||\
-                                     ((__SPEED__) == GPIO_SPEED_HIGH))
+#define IS_GPIO_SPEED(__SPEED__)    (((__SPEED__) == GPIO_SPEED_FREQ_LOW)       ||\
+                                     ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM)    ||\
+                                     ((__SPEED__) == GPIO_SPEED_FREQ_HIGH)      ||\
+                                     ((__SPEED__) == GPIO_SPEED_FREQ_VERY_HIGH))
 
 #define IS_GPIO_PULL(__PULL__)      (((__PULL__) == GPIO_NOPULL)   ||\
                                      ((__PULL__) == GPIO_PULLUP)   || \