Diff: TARGET_NUCLEO_L432KC/stm32l4xx_hal_opamp.h

Revision:

122:f9eeca106725

diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L432KC/stm32l4xx_hal_opamp.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L432KC/stm32l4xx_hal_opamp.h	Thu Jul 07 14:34:11 2016 +0100
@@ -0,0 +1,424 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_opamp.h
+  * @author  MCD Application Team
+  * @version V1.5.1
+  * @date    31-May-2016
+  * @brief   Header file of OPAMP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_OPAMP_H
+#define __STM32L4xx_HAL_OPAMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+                  
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup OPAMP
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  OPAMP Init structure definition  
+  */
+  
+typedef struct
+{
+  uint32_t PowerSupplyRange;            /*!< Specifies the power supply range: above or under 2.4V.
+                                             This parameter must be a value of @ref OPAMP_PowerSupplyRange
+                                             Caution: This parameter is common to all OPAMP instances: a modification of this parameter for the selected OPAMP impacts the other OPAMP instances. */
+
+  uint32_t PowerMode;                   /*!< Specifies the power mode Normal or Low-Power.
+                                             This parameter must be a value of @ref OPAMP_PowerMode */
+  
+  uint32_t Mode;                        /*!< Specifies the OPAMP mode
+                                             This parameter must be a value of @ref OPAMP_Mode 
+                                             mode is either Standalone, - Follower or PGA */
+                                    
+  uint32_t InvertingInput;              /*!< Specifies the inverting input in Standalone & PGA modes
+                                               - In Standalone mode:   i.e. when mode is OPAMP_STANDALONE_MODE
+                                                 & PGA mode:           i.e. when mode is OPAMP_PGA_MODE
+                                                 This parameter must be a value of @ref OPAMP_InvertingInput 
+                                               - In Follower mode    i.e. when mode is OPAMP_FOLLOWER_MODE
+                                                 This parameter is Not Applicable */ 
+
+  uint32_t NonInvertingInput;           /*!< Specifies the non inverting input of the opamp: 
+                                             This parameter must be a value of @ref OPAMP_NonInvertingInput */                                   
+  
+  uint32_t PgaGain;                     /*!< Specifies the gain in PGA mode 
+                                             i.e. when mode is OPAMP_PGA_MODE. 
+                                             This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */
+ 
+  uint32_t UserTrimming;                /*!< Specifies the trimming mode 
+                                             This parameter must be a value of @ref OPAMP_UserTrimming 
+                                             UserTrimming is either factory or user trimming.*/
+                                                                                                                            
+  uint32_t TrimmingValueP;              /*!< Specifies the offset trimming value (PMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31 
+                                             16 is typical default value */
+                                        
+  uint32_t TrimmingValueN;              /*!< Specifies the offset trimming value (NMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31 
+                                             16 is typical default value */
+  
+  uint32_t TrimmingValuePLowPower;      /*!< Specifies the offset trimming value (PMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31  
+                                             16 is typical default value */
+
+  uint32_t TrimmingValueNLowPower;      /*!< Specifies the offset trimming value (NMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31  
+                                             16 is typical default value */
+
+}OPAMP_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+
+typedef enum
+{
+  HAL_OPAMP_STATE_RESET               = 0x00000000, /*!< OPAMP is not yet Initialized          */
+  
+  HAL_OPAMP_STATE_READY               = 0x00000001, /*!< OPAMP is initialized and ready for use */
+  HAL_OPAMP_STATE_CALIBBUSY           = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
+ 
+  HAL_OPAMP_STATE_BUSY                = 0x00000004, /*!< OPAMP is enabled and running in normal mode */                                                                           
+  HAL_OPAMP_STATE_BUSYLOCKED          = 0x00000005  /*!< OPAMP is locked
+                                                         only system reset allows reconfiguring the opamp. */
+    
+}HAL_OPAMP_StateTypeDef;
+
+/** 
+  * @brief OPAMP Handle Structure definition
+  */ 
+typedef struct
+{
+  OPAMP_TypeDef       *Instance;                    /*!< OPAMP instance's registers base address   */
+  OPAMP_InitTypeDef   Init;                         /*!< OPAMP required parameters */
+  HAL_StatusTypeDef Status;                         /*!< OPAMP peripheral status   */
+  HAL_LockTypeDef   Lock;                           /*!< Locking object          */
+  __IO HAL_OPAMP_StateTypeDef  State;               /*!< OPAMP communication state */
+  
+} OPAMP_HandleTypeDef;
+
+/** 
+  * @brief HAl_OPAMP_TrimmingValueTypeDef definition 
+  */ 
+
+typedef  uint32_t HAL_OPAMP_TrimmingValueTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
+  * @{
+  */      
+
+/** @defgroup OPAMP_Mode OPAMP Mode
+  * @{
+  */
+#define OPAMP_STANDALONE_MODE            ((uint32_t)0x00000000) /*!< standalone mode */
+#define OPAMP_PGA_MODE                   OPAMP_CSR_OPAMODE_1    /*!< PGA mode */
+#define OPAMP_FOLLOWER_MODE              OPAMP_CSR_OPAMODE      /*!< follower mode */
+    
+/**
+  * @}
+  */                                        
+                                                                             
+/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_IO0        ((uint32_t)0x00000000)  /*!< OPAMP non-inverting input connected to dedicated IO pin */
+#define OPAMP_NONINVERTINGINPUT_DAC_CH      OPAMP_CSR_VPSEL        /*!< OPAMP non-inverting input connected internally to DAC channel */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
+  * @{
+  */
+
+#define OPAMP_INVERTINGINPUT_IO0              ((uint32_t)0x00000000)  /*!< OPAMP inverting input connected to dedicated IO pin low-leakage */
+#define OPAMP_INVERTINGINPUT_IO1              OPAMP_CSR_VMSEL_0       /*!< OPAMP inverting input connected to alternative IO pin available on some device packages */
+#define OPAMP_INVERTINGINPUT_CONNECT_NO       OPAMP_CSR_VMSEL_1       /*!< OPAMP inverting input not connected externally (PGA mode only) */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
+  * @{
+  */
+
+#define OPAMP_PGA_GAIN_2                ((uint32_t)0x00000000)                        /*!< PGA gain =  2 */
+#define OPAMP_PGA_GAIN_4                OPAMP_CSR_PGGAIN_0                            /*!< PGA gain =  4 */
+#define OPAMP_PGA_GAIN_8                OPAMP_CSR_PGGAIN_1                            /*!< PGA gain =  8 */
+#define OPAMP_PGA_GAIN_16              (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1)      /*!< PGA gain = 16 */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PowerMode OPAMP PowerMode
+  * @{
+  */
+#define OPAMP_POWERMODE_NORMAL        ((uint32_t)0x00000000)
+#define OPAMP_POWERMODE_LOWPOWER      OPAMP_CSR_OPALPM
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PowerSupplyRange OPAMP PowerSupplyRange
+  * @{
+  */
+#define OPAMP_POWERSUPPLY_LOW          ((uint32_t)0x00000000)  /*!< Power supply range low (VDDA lower than 2.4V) */
+#define OPAMP_POWERSUPPLY_HIGH         OPAMP1_CSR_OPARANGE     /*!< Power supply range high (VDDA higher than 2.4V) */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
+  * @{
+  */
+#define OPAMP_TRIMMING_FACTORY        ((uint32_t)0x00000000)                          /*!< Factory trimming */
+#define OPAMP_TRIMMING_USER           OPAMP_CSR_USERTRIM                              /*!< User trimming */
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+                                     ((TRIMMING) == OPAMP_TRIMMING_USER))
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
+  * @{
+  */
+#define OPAMP_FACTORYTRIMMING_DUMMY    ((uint32_t)0xFFFFFFFF)                           /*!< Dummy value if trimming value could not be retrieved */
+
+#define OPAMP_FACTORYTRIMMING_N        ((uint32_t)0x00000000)                          /*!< Offset trimming N */
+#define OPAMP_FACTORYTRIMMING_P        ((uint32_t)0x00000001)                          /*!< Offset trimming P */
+
+/**
+  * @}
+  */           
+
+ /**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup OPAMP_Private_Constants OPAMP Private Constants
+  * @brief   OPAMP Private constants and defines
+  * @{
+  */
+
+/* NONINVERTING bit position in OTR & LPOTR */ 
+#define OPAMP_INPUT_NONINVERTING              ((uint32_t) 8) /*!< Non inverting input */  
+
+/* Offset trimming time: during calibration, minimum time needed between two  */
+/* steps to have 1 mV accuracy.                                               */
+/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=1ms.*/
+/* Unit: ms.                                                                  */
+#define OPAMP_TRIMMING_DELAY               ((uint32_t) 1)
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
+  * @{
+  */
+
+/** @brief Reset OPAMP handle state.
+  * @param  __HANDLE__: OPAMP handle.
+  * @retval None
+  */
+#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
+
+/**
+  * @}
+  */ 
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup OPAMP_Private_Macros OPAMP Private Macros
+  * @{
+  */
+
+#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
+                                               ((INPUT) == OPAMP_PGA_MODE) || \
+                                               ((INPUT) == OPAMP_FOLLOWER_MODE))
+
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
+                                                    ((INPUT) == OPAMP_INVERTINGINPUT_IO1))
+#endif
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx)  || defined (STM32L442xx)  || defined (STM32L443xx)
+#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) ((INPUT) == OPAMP_INVERTINGINPUT_IO0)
+#endif
+
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH))
+
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+#define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
+                                             ((INPUT) == OPAMP_INVERTINGINPUT_IO1)|| \
+                                             ((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO))
+#endif
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx)  || defined (STM32L442xx)  || defined (STM32L443xx)
+#define IS_OPAMP_INVERTING_INPUT_PGA(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
+                                             ((INPUT) == OPAMP_INVERTINGINPUT_CONNECT_NO))
+#endif
+
+#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_4) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_8) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_16))
+
+#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMAL) || \
+                                      ((TRIMMING) == OPAMP_POWERMODE_LOWPOWER) )
+
+#define IS_OPAMP_POWER_SUPPLY_RANGE(RANGE) (((RANGE) == OPAMP_POWERSUPPLY_LOW) || \
+                                            ((RANGE) == OPAMP_POWERSUPPLY_HIGH)  )
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+                                     ((TRIMMING) == OPAMP_TRIMMING_USER))
+
+
+#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1F)
+
+#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
+                                             ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
+
+/**
+  * @}
+  */ 
+
+/* Include OPAMP HAL Extended module */
+#include "stm32l4xx_hal_opamp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMP_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group2
+  * @{
+  */
+
+/* I/O operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); 
+
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group3
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp); 
+HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
+
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group4
+  * @{
+  */
+
+/* Peripheral State functions  **************************************************/
+HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_OPAMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/