mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L432KC/stm32l4xx_hal_flash.h
- Revision:
- 122:f9eeca106725
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L432KC/stm32l4xx_hal_flash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L432KC/stm32l4xx_hal_flash.h Thu Jul 07 14:34:11 2016 +0100
@@ -0,0 +1,903 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_FLASH_H
+#define __STM32L4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or page erase.
+ This parameter can be a value of @ref FLASH_Type_Erase */
+ uint32_t Banks; /*!< Select bank to erase.
+ This parameter must be a value of @ref FLASH_Banks
+ (FLASH_BANK_BOTH should be used only for mass erase) */
+ uint32_t Page; /*!< Initial Flash page to erase when page erase is disabled
+ This parameter must be a value between 0 and (max number of pages in the bank - 1)
+ (eg : 255 for 1MB dual bank) */
+ uint32_t NbPages; /*!< Number of pages to be erased.
+ This parameter must be a value between 1 and (max number of pages in the bank - value of initial page)*/
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a combination of the values of @ref FLASH_OB_Type */
+ uint32_t WRPArea; /*!< Write protection area to be programmed (used for OPTIONBYTE_WRP).
+ Only one WRP area could be programmed at the same time.
+ This parameter can be value of @ref FLASH_OB_WRP_Area */
+ uint32_t WRPStartOffset; /*!< Write protection start offset (used for OPTIONBYTE_WRP).
+ This parameter must be a value between 0 and (max number of pages in the bank - 1)
+ (eg : 25 for 1MB dual bank) */
+ uint32_t WRPEndOffset; /*!< Write protection end offset (used for OPTIONBYTE_WRP).
+ This parameter must be a value between WRPStartOffset and (max number of pages in the bank - 1) */
+ uint32_t RDPLevel; /*!< Set the read protection level.. (used for OPTIONBYTE_RDP).
+ This parameter can be a value of @ref FLASH_OB_Read_Protection */
+ uint32_t USERType; /*!< User option byte(s) to be configured (used for OPTIONBYTE_USER).
+ This parameter can be a combination of @ref FLASH_OB_USER_Type */
+ uint32_t USERConfig; /*!< Value of the user option byte (used for OPTIONBYTE_USER).
+ This parameter can be a combination of @ref FLASH_OB_USER_BOR_LEVEL,
+ @ref FLASH_OB_USER_nRST_STOP, @ref FLASH_OB_USER_nRST_STANDBY,
+ @ref FLASH_OB_USER_nRST_SHUTDOWN, @ref FLASH_OB_USER_IWDG_SW,
+ @ref FLASH_OB_USER_IWDG_STOP, @ref FLASH_OB_USER_IWDG_STANDBY,
+ @ref FLASH_OB_USER_WWDG_SW, @ref FLASH_OB_USER_BFB2,
+ @ref FLASH_OB_USER_DUALBANK, @ref FLASH_OB_USER_nBOOT1,
+ @ref FLASH_OB_USER_SRAM2_PE and @ref FLASH_OB_USER_SRAM2_RST */
+ uint32_t PCROPConfig; /*!< Configuration of the PCROP (used for OPTIONBYTE_PCROP).
+ This parameter must be a combination of @ref FLASH_Banks (except FLASH_BANK_BOTH)
+ and @ref FLASH_OB_PCROP_RDP */
+ uint32_t PCROPStartAddr; /*!< PCROP Start address (used for OPTIONBYTE_PCROP).
+ This parameter must be a value between begin and end of bank
+ => Be careful of the bank swapping for the address */
+ uint32_t PCROPEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP).
+ This parameter must be a value between PCROP Start address and end of bank */
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_PAGE_ERASE,
+ FLASH_PROC_MASS_ERASE,
+ FLASH_PROC_PROGRAM,
+ FLASH_PROC_PROGRAM_LAST
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+ __IO uint32_t ErrorCode; /* FLASH error code */
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+ __IO uint32_t Address; /* Internal variable to save address selected for program in IT context */
+ __IO uint32_t Bank; /* Internal variable to save current bank selected during erase in IT context */
+ __IO uint32_t Page; /* Internal variable to define the current page which is erasing in IT context */
+ __IO uint32_t NbPagesToErase; /* Internal variable to save the remaining pages to erase in IT context */
+}FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define HAL_FLASH_ERROR_OP ((uint32_t)0x00000001)
+#define HAL_FLASH_ERROR_PROG ((uint32_t)0x00000002)
+#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000004)
+#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008)
+#define HAL_FLASH_ERROR_SIZ ((uint32_t)0x00000010)
+#define HAL_FLASH_ERROR_PGS ((uint32_t)0x00000020)
+#define HAL_FLASH_ERROR_MIS ((uint32_t)0x00000040)
+#define HAL_FLASH_ERROR_FAST ((uint32_t)0x00000080)
+#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000100)
+#define HAL_FLASH_ERROR_OPTV ((uint32_t)0x00000200)
+#define HAL_FLASH_ERROR_ECCD ((uint32_t)0x00000400)
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx)
+#define HAL_FLASH_ERROR_PEMPTY ((uint32_t)0x00000800)
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Erase FLASH Erase Type
+ * @{
+ */
+#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
+#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01) /*!<Flash mass erase activation*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Banks FLASH Banks
+ * @{
+ */
+#define FLASH_BANK_1 ((uint32_t)0x01) /*!< Bank 1 */
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+#define FLASH_BANK_2 ((uint32_t)0x02) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1 | FLASH_BANK_2)) /*!< Bank1 and Bank2 */
+#else
+#define FLASH_BANK_BOTH ((uint32_t)(FLASH_BANK_1)) /*!< Bank 1 */
+#endif
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASH_Type_Program FLASH Program Type
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x00) /*!<Program a double-word (64-bit) at a specified address.*/
+#define FLASH_TYPEPROGRAM_FAST ((uint32_t)0x01) /*!<Fast program a 32 row double-word (64-bit) at a specified address.
+ And another 32 row double-word (64-bit) will be programmed */
+#define FLASH_TYPEPROGRAM_FAST_AND_LAST ((uint32_t)0x02) /*!<Fast program a 32 row double-word (64-bit) at a specified address.
+ And this is the last 32 row double-word (64-bit) programmed */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */
+#define OPTIONBYTE_PCROP ((uint32_t)0x08) /*!< PCROP option byte configuration */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_WRP_Area FLASH WRP Area
+ * @{
+ */
+#define OB_WRPAREA_BANK1_AREAA ((uint32_t)0x00) /*!< Flash Bank 1 Area A */
+#define OB_WRPAREA_BANK1_AREAB ((uint32_t)0x01) /*!< Flash Bank 1 Area B */
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+#define OB_WRPAREA_BANK2_AREAA ((uint32_t)0x02) /*!< Flash Bank 2 Area A */
+#define OB_WRPAREA_BANK2_AREAB ((uint32_t)0x04) /*!< Flash Bank 2 Area B */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint32_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint32_t)0xBB)
+#define OB_RDP_LEVEL_2 ((uint32_t)0xCC) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_Type FLASH Option Bytes User Type
+ * @{
+ */
+#define OB_USER_BOR_LEV ((uint32_t)0x0001) /*!< BOR reset Level */
+#define OB_USER_nRST_STOP ((uint32_t)0x0002) /*!< Reset generated when entering the stop mode */
+#define OB_USER_nRST_STDBY ((uint32_t)0x0004) /*!< Reset generated when entering the standby mode */
+#define OB_USER_IWDG_SW ((uint32_t)0x0008) /*!< Independent watchdog selection */
+#define OB_USER_IWDG_STOP ((uint32_t)0x0010) /*!< Independent watchdog counter freeze in stop mode */
+#define OB_USER_IWDG_STDBY ((uint32_t)0x0020) /*!< Independent watchdog counter freeze in standby mode */
+#define OB_USER_WWDG_SW ((uint32_t)0x0040) /*!< Window watchdog selection */
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+#define OB_USER_BFB2 ((uint32_t)0x0080) /*!< Dual-bank boot */
+#define OB_USER_DUALBANK ((uint32_t)0x0100) /*!< Dual-Bank on 512KB or 256KB Flash memory devices */
+#endif
+#define OB_USER_nBOOT1 ((uint32_t)0x0200) /*!< Boot configuration */
+#define OB_USER_SRAM2_PE ((uint32_t)0x0400) /*!< SRAM2 parity check enable */
+#define OB_USER_SRAM2_RST ((uint32_t)0x0800) /*!< SRAM2 Erase when system reset */
+#define OB_USER_nRST_SHDW ((uint32_t)0x1000) /*!< Reset generated when entering the shutdown mode */
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx)
+#define OB_USER_nSWBOOT0 ((uint32_t)0x2000) /*!< Software BOOT0 */
+#define OB_USER_nBOOT0 ((uint32_t)0x4000) /*!< nBOOT0 option bit */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_BOR_LEVEL FLASH Option Bytes User BOR Level
+ * @{
+ */
+#define OB_BOR_LEVEL_0 ((uint32_t)FLASH_OPTR_BOR_LEV_0) /*!< Reset level threshold is around 1.7V */
+#define OB_BOR_LEVEL_1 ((uint32_t)FLASH_OPTR_BOR_LEV_1) /*!< Reset level threshold is around 2.0V */
+#define OB_BOR_LEVEL_2 ((uint32_t)FLASH_OPTR_BOR_LEV_2) /*!< Reset level threshold is around 2.2V */
+#define OB_BOR_LEVEL_3 ((uint32_t)FLASH_OPTR_BOR_LEV_3) /*!< Reset level threshold is around 2.5V */
+#define OB_BOR_LEVEL_4 ((uint32_t)FLASH_OPTR_BOR_LEV_4) /*!< Reset level threshold is around 2.8V */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop
+ * @{
+ */
+#define OB_STOP_RST ((uint32_t)0x0000) /*!< Reset generated when entering the stop mode */
+#define OB_STOP_NORST ((uint32_t)FLASH_OPTR_nRST_STOP) /*!< No reset generated when entering the stop mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_nRST_STANDBY FLASH Option Bytes User Reset On Standby
+ * @{
+ */
+#define OB_STANDBY_RST ((uint32_t)0x0000) /*!< Reset generated when entering the standby mode */
+#define OB_STANDBY_NORST ((uint32_t)FLASH_OPTR_nRST_STDBY) /*!< No reset generated when entering the standby mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_nRST_SHUTDOWN FLASH Option Bytes User Reset On Shutdown
+ * @{
+ */
+#define OB_SHUTDOWN_RST ((uint32_t)0x0000) /*!< Reset generated when entering the shutdown mode */
+#define OB_SHUTDOWN_NORST ((uint32_t)FLASH_OPTR_nRST_SHDW) /*!< No reset generated when entering the shutdown mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type
+ * @{
+ */
+#define OB_IWDG_HW ((uint32_t)0x00000) /*!< Hardware independent watchdog */
+#define OB_IWDG_SW ((uint32_t)FLASH_OPTR_IWDG_SW) /*!< Software independent watchdog */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_IWDG_STOP FLASH Option Bytes User IWDG Mode On Stop
+ * @{
+ */
+#define OB_IWDG_STOP_FREEZE ((uint32_t)0x00000) /*!< Independent watchdog counter is frozen in Stop mode */
+#define OB_IWDG_STOP_RUN ((uint32_t)FLASH_OPTR_IWDG_STOP) /*!< Independent watchdog counter is running in Stop mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_IWDG_STANDBY FLASH Option Bytes User IWDG Mode On Standby
+ * @{
+ */
+#define OB_IWDG_STDBY_FREEZE ((uint32_t)0x00000) /*!< Independent watchdog counter is frozen in Standby mode */
+#define OB_IWDG_STDBY_RUN ((uint32_t)FLASH_OPTR_IWDG_STDBY) /*!< Independent watchdog counter is running in Standby mode */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_WWDG_SW FLASH Option Bytes User WWDG Type
+ * @{
+ */
+#define OB_WWDG_HW ((uint32_t)0x00000) /*!< Hardware window watchdog */
+#define OB_WWDG_SW ((uint32_t)FLASH_OPTR_WWDG_SW) /*!< Software window watchdog */
+/**
+ * @}
+ */
+
+#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
+/** @defgroup FLASH_OB_USER_BFB2 FLASH Option Bytes User BFB2 Mode
+ * @{
+ */
+#define OB_BFB2_DISABLE ((uint32_t)0x000000) /*!< Dual-bank boot disable */
+#define OB_BFB2_ENABLE ((uint32_t)FLASH_OPTR_BFB2) /*!< Dual-bank boot enable */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_DUALBANK FLASH Option Bytes User Dual-bank Type
+ * @{
+ */
+#define OB_DUALBANK_SINGLE ((uint32_t)0x000000) /*!< 256 KB/512 KB Single-bank Flash */
+#define OB_DUALBANK_DUAL ((uint32_t)FLASH_OPTR_DUALBANK) /*!< 256 KB/512 KB Dual-bank Flash */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup FLASH_OB_USER_nBOOT1 FLASH Option Bytes User BOOT1 Type
+ * @{
+ */
+#define OB_BOOT1_SRAM ((uint32_t)0x000000) /*!< Embedded SRAM1 is selected as boot space (if BOOT0=1) */
+#define OB_BOOT1_SYSTEM ((uint32_t)FLASH_OPTR_nBOOT1) /*!< System memory is selected as boot space (if BOOT0=1) */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_SRAM2_PE FLASH Option Bytes User SRAM2 Parity Check Type
+ * @{
+ */
+#define OB_SRAM2_PARITY_ENABLE ((uint32_t)0x0000000) /*!< SRAM2 parity check enable */
+#define OB_SRAM2_PARITY_DISABLE ((uint32_t)FLASH_OPTR_SRAM2_PE) /*!< SRAM2 parity check disable */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_USER_SRAM2_RST FLASH Option Bytes User SRAM2 Erase On Reset Type
+ * @{
+ */
+#define OB_SRAM2_RST_ERASE ((uint32_t)0x0000000) /*!< SRAM2 erased when a system reset occurs */
+#define OB_SRAM2_RST_NOT_ERASE ((uint32_t)FLASH_OPTR_SRAM2_RST) /*!< SRAM2 is not erased when a system reset occurs */
+/**
+ * @}
+ */
+
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx)
+/** @defgroup OB_USER_nSWBOOT0 FLASH Option Bytes User Software BOOT0
+ * @{
+ */
+#define OB_BOOT0_FROM_OB ((uint32_t)0x0000000) /*!< BOOT0 taken from the option bit nBOOT0 */
+#define OB_BOOT0_FROM_PIN ((uint32_t)FLASH_OPTR_nSWBOOT0) /*!< BOOT0 taken from PH3/BOOT0 pin */
+/**
+ * @}
+ */
+
+/** @defgroup OB_USER_nBOOT0 FLASH Option Bytes User nBOOT0 option bit
+ * @{
+ */
+#define OB_BOOT0_RESET ((uint32_t)0x0000000) /*!< nBOOT0 = 0 */
+#define OB_BOOT0_SET ((uint32_t)FLASH_OPTR_nBOOT0) /*!< nBOOT0 = 1 */
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup FLASH_OB_PCROP_RDP FLASH Option Bytes PCROP On RDP Level Type
+ * @{
+ */
+#define OB_PCROP_RDP_NOT_ERASE ((uint32_t)0x00000000) /*!< PCROP area is not erased when the RDP level
+ is decreased from Level 1 to Level 0 */
+#define OB_PCROP_RDP_ERASE ((uint32_t)FLASH_PCROP1ER_PCROP_RDP) /*!< PCROP area is erased when the RDP level is
+ decreased from Level 1 to Level 0 (full mass erase) */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define FLASH_KEY1 ((uint32_t)0x45670123U) /*!< Flash key1 */
+#define FLASH_KEY2 ((uint32_t)0xCDEF89ABU) /*!< Flash key2: used with FLASH_KEY1
+ to unlock the FLASH registers access */
+
+#define FLASH_PDKEY1 ((uint32_t)0x04152637U) /*!< Flash power down key1 */
+#define FLASH_PDKEY2 ((uint32_t)0xFAFBFCFDU) /*!< Flash power down key2: used with FLASH_PDKEY1
+ to unlock the RUN_PD bit in FLASH_ACR */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x08192A3BU) /*!< Flash option byte key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0x4C5D6E7FU) /*!< Flash option byte key2: used with FLASH_OPTKEY1
+ to allow option bytes operations */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flags FLASH Flags Definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_OPERR /*!< FLASH Operation error flag */
+#define FLASH_FLAG_PROGERR FLASH_SR_PROGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protection error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming alignment error flag */
+#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming sequence error flag */
+#define FLASH_FLAG_MISERR FLASH_SR_MISERR /*!< FLASH Fast programming data miss error flag */
+#define FLASH_FLAG_FASTERR FLASH_SR_FASTERR /*!< FLASH Fast programming error flag */
+#define FLASH_FLAG_RDERR FLASH_SR_RDERR /*!< FLASH PCROP read error flag */
+#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option validity error flag */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx)
+#define FLASH_FLAG_PEMPTY FLASH_SR_PEMPTY /*!< FLASH Program empty */
+#endif
+#define FLASH_FLAG_ECCC FLASH_ECCR_ECCC /*!< FLASH ECC correction */
+#define FLASH_FLAG_ECCD FLASH_ECCR_ECCD /*!< FLASH ECC detection */
+
+#define FLASH_FLAG_ALL_ERRORS (FLASH_FLAG_OPERR | FLASH_FLAG_PROGERR | FLASH_FLAG_WRPERR | \
+ FLASH_FLAG_PGAERR | FLASH_FLAG_SIZERR | FLASH_FLAG_PGSERR | \
+ FLASH_FLAG_MISERR | FLASH_FLAG_FASTERR | FLASH_FLAG_RDERR | \
+ FLASH_FLAG_OPTVERR | FLASH_FLAG_ECCD)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupts Definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_OPERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+#define FLASH_IT_RDERR FLASH_CR_RDERRIE /*!< PCROP Read Error Interrupt source*/
+#define FLASH_IT_ECCC (FLASH_ECCR_ECCIE >> 24) /*!< ECC Correction Interrupt source */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * This parameter can be one of the following values :
+ * @arg FLASH_LATENCY_0: FLASH Zero wait state
+ * @arg FLASH_LATENCY_1: FLASH One wait state
+ * @arg FLASH_LATENCY_2: FLASH Two wait states
+ * @arg FLASH_LATENCY_3: FLASH Three wait states
+ * @arg FLASH_LATENCY_4: FLASH Four wait states
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (__LATENCY__)))
+
+/**
+ * @brief Get the FLASH Latency.
+ * @retval FLASH Latency
+ * This parameter can be one of the following values :
+ * @arg FLASH_LATENCY_0: FLASH Zero wait state
+ * @arg FLASH_LATENCY_1: FLASH One wait state
+ * @arg FLASH_LATENCY_2: FLASH Two wait states
+ * @arg FLASH_LATENCY_3: FLASH Three wait states
+ * @arg FLASH_LATENCY_4: FLASH Four wait states
+ */
+#define __HAL_FLASH_GET_LATENCY() READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICEN)
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCEN)
+
+/**
+ * @brief Reset the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_ICRST); \
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_ICRST); \
+ } while (0)
+
+/**
+ * @brief Reset the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() do { SET_BIT(FLASH->ACR, FLASH_ACR_DCRST); \
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_DCRST); \
+ } while (0)
+
+/**
+ * @brief Enable the FLASH power down during Low-power run mode.
+ * @note Writing this bit to 0 this bit, automatically the keys are
+ * loss and a new unlock sequence is necessary to re-write it to 1.
+ */
+#define __HAL_FLASH_POWER_DOWN_ENABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \
+ WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \
+ SET_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \
+ } while (0)
+
+/**
+ * @brief Disable the FLASH power down during Low-power run mode.
+ * @note Writing this bit to 0 this bit, automatically the keys are
+ * loss and a new unlock sequence is necessary to re-write it to 1.
+ */
+#define __HAL_FLASH_POWER_DOWN_DISABLE() do { WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY1); \
+ WRITE_REG(FLASH->PDKEYR, FLASH_PDKEY2); \
+ CLEAR_BIT(FLASH->ACR, FLASH_ACR_RUN_PD); \
+ } while (0)
+
+/**
+ * @brief Enable the FLASH power down during Low-Power sleep mode
+ * @retval none
+ */
+#define __HAL_FLASH_SLEEP_POWERDOWN_ENABLE() SET_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
+
+/**
+ * @brief Disable the FLASH power down during Low-Power sleep mode
+ * @retval none
+ */
+#define __HAL_FLASH_SLEEP_POWERDOWN_DISABLE() CLEAR_BIT(FLASH->ACR, FLASH_ACR_SLEEP_PD)
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupts Macros
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__: FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_OPERR: Error Interrupt
+ * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt
+ * @arg FLASH_IT_ECCC: ECC Correction Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if((__INTERRUPT__) & FLASH_IT_ECCC) { SET_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\
+ if((__INTERRUPT__) & (~FLASH_IT_ECCC)) { SET_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\
+ } while(0)
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__: FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_OPERR: Error Interrupt
+ * @arg FLASH_IT_RDERR: PCROP Read Error Interrupt
+ * @arg FLASH_IT_ECCC: ECC Correction Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if((__INTERRUPT__) & FLASH_IT_ECCC) { CLEAR_BIT(FLASH->ECCR, FLASH_ECCR_ECCIE); }\
+ if((__INTERRUPT__) & (~FLASH_IT_ECCC)) { CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & (~FLASH_IT_ECCC))); }\
+ } while(0)
+
+/**
+ * @brief Check whether the specified FLASH flag is set or not.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR: FLASH Operation error flag
+ * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag
+ * @arg FLASH_FLAG_SIZERR: FLASH Size error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag
+ * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag
+ * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag
+ * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag
+ * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag
+ * @arg FLASH_FLAG_BSY: FLASH write/erase operations in progress flag
+ * @arg FLASH_FLAG_PEMPTY : FLASH Boot from not programmed flash (apply only for STM32L43x/STM32L44x devices)
+ * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected
+ * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected
+ * @retval The new state of FLASH_FLAG (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) ? \
+ (READ_BIT(FLASH->ECCR, (__FLAG__)) == (__FLAG__)) : \
+ (READ_BIT(FLASH->SR, (__FLAG__)) == (__FLAG__)))
+
+/**
+ * @brief Clear the FLASH's pending flags.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP: FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR: FLASH Operation error flag
+ * @arg FLASH_FLAG_PROGERR: FLASH Programming error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protection error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming alignment error flag
+ * @arg FLASH_FLAG_SIZERR: FLASH Size error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming sequence error flag
+ * @arg FLASH_FLAG_MISERR: FLASH Fast programming data miss error flag
+ * @arg FLASH_FLAG_FASTERR: FLASH Fast programming error flag
+ * @arg FLASH_FLAG_RDERR: FLASH PCROP read error flag
+ * @arg FLASH_FLAG_OPTVERR: FLASH Option validity error flag
+ * @arg FLASH_FLAG_ECCC: FLASH one ECC error has been detected and corrected
+ * @arg FLASH_FLAG_ECCD: FLASH two ECC errors have been detected
+ * @arg FLASH_FLAG_ALL_ERRORS: FLASH All errors flags
+ * @retval None
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) { SET_BIT(FLASH->ECCR, ((__FLAG__) & (FLASH_FLAG_ECCC | FLASH_FLAG_ECCD))); }\
+ if((__FLAG__) & ~(FLASH_FLAG_ECCC | FLASH_FLAG_ECCD)) { WRITE_REG(FLASH->SR, ((__FLAG__) & ~(FLASH_FLAG_ECCC | FLASH_FLAG_ECCD))); }\
+ } while(0)
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extended module */
+#include "stm32l4xx_hal_flash_ex.h"
+#include "stm32l4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/* Program operation functions ***********************************************/
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+uint32_t HAL_FLASH_GetError(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFF75E0)
+
+#define FLASH_SIZE ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0xFFFF)) ? (0x400 << 10) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) << 10))
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define FLASH_BANK_SIZE (FLASH_SIZE >> 1)
+#else
+#define FLASH_BANK_SIZE (FLASH_SIZE)
+#endif
+
+#define FLASH_PAGE_SIZE ((uint32_t)0x800)
+
+#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+
+#define IS_FLASH_BANK_EXCLUSIVE(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2))
+#else
+#define IS_FLASH_BANK(BANK) ((BANK) == FLASH_BANK_1)
+
+#define IS_FLASH_BANK_EXCLUSIVE(BANK) ((BANK) == FLASH_BANK_1)
+#endif
+
+#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_FAST) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_FAST_AND_LAST))
+
+#define IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x400) ? \
+ ((ADDRESS) <= FLASH_BASE+0xFFFFF) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x200) ? \
+ ((ADDRESS) <= FLASH_BASE+0x7FFFF) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x100) ? \
+ ((ADDRESS) <= FLASH_BASE+0x3FFFF) : ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x80) ? \
+ ((ADDRESS) <= FLASH_BASE+0x1FFFF) : ((ADDRESS) <= FLASH_BASE+0xFFFFF))))))
+
+#define IS_FLASH_OTP_ADDRESS(ADDRESS) (((ADDRESS) >= 0x1FFF7000) && ((ADDRESS) <= 0x1FFF73FF))
+
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (IS_FLASH_MAIN_MEM_ADDRESS(ADDRESS) || IS_FLASH_OTP_ADDRESS(ADDRESS))
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x400) ? ((PAGE) < 256) : \
+ ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x200) ? ((PAGE) < 128) : \
+ ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x100) ? ((PAGE) < 64) : \
+ ((PAGE) < 256)))))
+#else
+#define IS_FLASH_PAGE(PAGE) (((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x100) ? ((PAGE) < 128) : \
+ ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) & (0x0FFF)) == 0x80) ? ((PAGE) < 64) : \
+ ((PAGE) < 128))))
+#endif
+
+#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_PCROP)))
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB) || \
+ ((VALUE) == OB_WRPAREA_BANK2_AREAA) || ((VALUE) == OB_WRPAREA_BANK2_AREAB))
+#else
+#define IS_OB_WRPAREA(VALUE) (((VALUE) == OB_WRPAREA_BANK1_AREAA) || ((VALUE) == OB_WRPAREA_BANK1_AREAB))
+#endif
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1)/* ||\
+ ((LEVEL) == OB_RDP_LEVEL_2)*/)
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x1FFF) && ((TYPE) != 0))
+#else
+#define IS_OB_USER_TYPE(TYPE) (((TYPE) <= (uint32_t)0x7E7F) && ((TYPE) != 0) && (((TYPE)&0x0180) == 0))
+#endif
+
+#define IS_OB_USER_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL_0) || ((LEVEL) == OB_BOR_LEVEL_1) || \
+ ((LEVEL) == OB_BOR_LEVEL_2) || ((LEVEL) == OB_BOR_LEVEL_3) || \
+ ((LEVEL) == OB_BOR_LEVEL_4))
+
+#define IS_OB_USER_STOP(VALUE) (((VALUE) == OB_STOP_RST) || ((VALUE) == OB_STOP_NORST))
+
+#define IS_OB_USER_STANDBY(VALUE) (((VALUE) == OB_STANDBY_RST) || ((VALUE) == OB_STANDBY_NORST))
+
+#define IS_OB_USER_SHUTDOWN(VALUE) (((VALUE) == OB_SHUTDOWN_RST) || ((VALUE) == OB_SHUTDOWN_NORST))
+
+#define IS_OB_USER_IWDG(VALUE) (((VALUE) == OB_IWDG_HW) || ((VALUE) == OB_IWDG_SW))
+
+#define IS_OB_USER_IWDG_STOP(VALUE) (((VALUE) == OB_IWDG_STOP_FREEZE) || ((VALUE) == OB_IWDG_STOP_RUN))
+
+#define IS_OB_USER_IWDG_STDBY(VALUE) (((VALUE) == OB_IWDG_STDBY_FREEZE) || ((VALUE) == OB_IWDG_STDBY_RUN))
+
+#define IS_OB_USER_WWDG(VALUE) (((VALUE) == OB_WWDG_HW) || ((VALUE) == OB_WWDG_SW))
+
+#if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx)
+#define IS_OB_USER_BFB2(VALUE) (((VALUE) == OB_BFB2_DISABLE) || ((VALUE) == OB_BFB2_ENABLE))
+
+#define IS_OB_USER_DUALBANK(VALUE) (((VALUE) == OB_DUALBANK_SINGLE) || ((VALUE) == OB_DUALBANK_DUAL))
+#endif
+
+#define IS_OB_USER_BOOT1(VALUE) (((VALUE) == OB_BOOT1_SRAM) || ((VALUE) == OB_BOOT1_SYSTEM))
+
+#define IS_OB_USER_SRAM2_PARITY(VALUE) (((VALUE) == OB_SRAM2_PARITY_ENABLE) || ((VALUE) == OB_SRAM2_PARITY_DISABLE))
+
+#define IS_OB_USER_SRAM2_RST(VALUE) (((VALUE) == OB_SRAM2_RST_ERASE) || ((VALUE) == OB_SRAM2_RST_NOT_ERASE))
+
+#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx)
+#define IS_OB_USER_SWBOOT0(VALUE) (((VALUE) == OB_BOOT0_FROM_OB) || ((VALUE) == OB_BOOT0_FROM_PIN))
+
+#define IS_OB_USER_BOOT0(VALUE) (((VALUE) == OB_BOOT0_RESET) || ((VALUE) == OB_BOOT0_SET))
+#endif
+
+#define IS_OB_PCROP_RDP(VALUE) (((VALUE) == OB_PCROP_RDP_NOT_ERASE) || ((VALUE) == OB_PCROP_RDP_ERASE))
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
