mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_DISCO_L476VG/stm32l4xx_ll_bus.h
- Revision:
- 122:f9eeca106725
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_DISCO_L476VG/stm32l4xx_ll_bus.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DISCO_L476VG/stm32l4xx_ll_bus.h Thu Jul 07 14:34:11 2016 +0100
@@ -0,0 +1,1695 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_bus.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_BUS_H
+#define __STM32L4xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
+#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHB1ENR_FLASHEN
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHB1ENR_TSCEN
+#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1SMENR_SRAM1SMEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB2_GRP1_PERIPH_SRAM2 RCC_AHB2SMENR_SRAM2SMEN
+#define LL_AHB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB2_GRP1_PERIPH_GPIOA RCC_AHB2ENR_GPIOAEN
+#define LL_AHB2_GRP1_PERIPH_GPIOB RCC_AHB2ENR_GPIOBEN
+#define LL_AHB2_GRP1_PERIPH_GPIOC RCC_AHB2ENR_GPIOCEN
+#if defined(GPIOD)
+#define LL_AHB2_GRP1_PERIPH_GPIOD RCC_AHB2ENR_GPIODEN
+#endif /*GPIOD*/
+#if defined(GPIOE)
+#define LL_AHB2_GRP1_PERIPH_GPIOE RCC_AHB2ENR_GPIOEEN
+#endif /*GPIOE*/
+#if defined(GPIOF)
+#define LL_AHB2_GRP1_PERIPH_GPIOF RCC_AHB2ENR_GPIOFEN
+#endif /* GPIOF */
+#if defined(GPIOG)
+#define LL_AHB2_GRP1_PERIPH_GPIOG RCC_AHB2ENR_GPIOGEN
+#endif /* GPIOG */
+#define LL_AHB2_GRP1_PERIPH_GPIOH RCC_AHB2ENR_GPIOHEN
+#if defined(USB_OTG_FS)
+#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN
+#endif /* USB_OTG_FS */
+#define LL_AHB2_GRP1_PERIPH_ADC RCC_AHB2ENR_ADCEN
+#if defined(AES)
+#define LL_AHB2_GRP1_PERIPH_AES RCC_AHB2ENR_AESEN
+#endif /* AES */
+#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB3_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#if defined(FMC_Bank1_R)
+#define LL_AHB3_GRP1_PERIPH_FMC RCC_AHB3ENR_FMCEN
+#endif /* FMC_Bank1_R */
+#define LL_AHB3_GRP1_PERIPH_QSPI RCC_AHB3ENR_QSPIEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR1_TIM2EN
+#if defined(TIM3)
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR1_TIM3EN
+#endif /* TIM3 */
+#if defined(TIM4)
+#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR1_TIM4EN
+#endif /* TIM4 */
+#if defined(TIM5)
+#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR1_TIM5EN
+#endif /* TIM5 */
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR1_TIM6EN
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR1_TIM7EN
+#if defined(LCD)
+#define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR1_LCDEN
+#endif /* LCD */
+#if defined(RCC_APB1ENR1_RTCAPBEN)
+#define LL_APB1_GRP1_PERIPH_RTCAPB RCC_APB1ENR1_RTCAPBEN
+#endif /* RCC_APB1ENR1_RTCAPBEN */
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR1_WWDGEN
+#if defined(SPI2)
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR1_SPI2EN
+#endif /* SPI2 */
+#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR1_SPI3EN
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR1_USART2EN
+#if defined(USART3)
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR1_USART3EN
+#endif /* USART3 */
+#if defined(UART4)
+#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR1_UART4EN
+#endif /* UART4 */
+#if defined(UART5)
+#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR1_UART5EN
+#endif /* UART5 */
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR1_I2C1EN
+#if defined(I2C2)
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR1_I2C2EN
+#endif /* I2C2 */
+#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR1_I2C3EN
+#if defined(CRS)
+#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR1_CRSEN
+#endif /* CRS */
+#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR1_CAN1EN
+#if defined(USB)
+#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR1_USBFSEN
+#endif /* USB */
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR1_PWREN
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR1_DAC1EN
+#define LL_APB1_GRP1_PERIPH_OPAMP RCC_APB1ENR1_OPAMPEN
+#define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR1_LPTIM1EN
+/**
+ * @}
+ */
+
+
+/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP2_PERIPH_LPUART1 RCC_APB1ENR2_LPUART1EN
+#define LL_APB1_GRP2_PERIPH_SWPMI1 RCC_APB1ENR2_SWPMI1EN
+#define LL_APB1_GRP2_PERIPH_LPTIM2 RCC_APB1ENR2_LPTIM2EN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB2_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB2_GRP1_PERIPH_FW RCC_APB2ENR_FWEN
+#if defined(SDMMC1)
+#define LL_APB2_GRP1_PERIPH_SDMMC1 RCC_APB2ENR_SDMMC1EN
+#endif /* SDMMC1 */
+#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#if defined(TIM8)
+#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
+#endif /* TIM8 */
+#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#define LL_APB2_GRP1_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
+#define LL_APB2_GRP1_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
+#if defined(TIM17)
+#define LL_APB2_GRP1_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
+#endif /* TIM17 */
+#define LL_APB2_GRP1_PERIPH_SAI1 RCC_APB2ENR_SAI1EN
+#if defined(SAI2)
+#define LL_APB2_GRP1_PERIPH_SAI2 RCC_APB2ENR_SAI2EN
+#endif /* SAI2 */
+#if defined(DFSDM1_Channel0)
+#define LL_APB2_GRP1_PERIPH_DFSDM1 RCC_APB2ENR_DFSDM1EN
+#endif /* DFSDM1_Channel0 */
+/**
+ * @}
+ */
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+*/
+#if defined(DFSDM1_Channel0)
+#define LL_APB2_GRP1_PERIPH_DFSDM LL_APB2_GRP1_PERIPH_DFSDM1
+#endif /* DFSDM1_Channel0 */
+/**
+@endcond
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR FLASHEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR TSCEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR FLASHRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR TSCRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR FLASHRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR TSCRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR CRCSMEN LL_AHB1_GRP1_EnableClockStopSleep\n
+ * AHB1SMENR TSCSMEN LL_AHB1_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB1SMENR DMA1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR DMA2SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR FLASHSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR SRAM1SMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR CRCSMEN LL_AHB1_GRP1_DisableClockStopSleep\n
+ * AHB1SMENR TSCSMEN LL_AHB1_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC
+ *
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB2 AHB2
+ * @{
+ */
+
+/**
+ * @brief Enable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB2 peripheral clock is enabled or not
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR GPIOAEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOBEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOCEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIODEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOEEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOFEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOGEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR GPIOHEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR ADCEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR AESEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIODRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOERST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR ADCRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOBRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOCRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIODRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOERST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOFRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOGRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR GPIOHRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR ADCRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR AESRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR ADCSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR AESSMEN LL_AHB2_GRP1_EnableClockStopSleep\n
+ * AHB2SMENR RNGSMEN LL_AHB2_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB2SMENR GPIOASMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOBSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIODSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOESMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOFSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOGSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR GPIOHSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR SRAM2SMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR OTGFSSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR ADCSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR AESSMEN LL_AHB2_GRP1_DisableClockStopSleep\n
+ * AHB2SMENR RNGSMEN LL_AHB2_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOF (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOG (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB2_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_AHB2_GRP1_PERIPH_AES (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB3 AHB3
+ * @{
+ */
+
+/**
+ * @brief Enable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_EnableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB3 peripheral clock is enabled or not
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_IsEnabledClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FMCEN LL_AHB3_GRP1_DisableClock\n
+ * AHB3ENR QSPIEN LL_AHB3_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ForceReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FMCRST LL_AHB3_GRP1_ReleaseReset\n
+ * AHB3RSTR QSPIRST LL_AHB3_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB3 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_EnableClockStopSleep\n
+ * AHB3SMENR QSPISMEN LL_AHB3_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB3 peripheral clocks in Sleep and Stop modes
+ * @rmtoll AHB3SMENR FMCSMEN LL_AHB3_GRP1_DisableClockStopSleep\n
+ * AHB3SMENR QSPISMEN LL_AHB3_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FMC (*)
+ * @arg @ref LL_AHB3_GRP1_PERIPH_QSPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1 APB1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR1, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR1, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_EnableClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_EnableClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR2, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR2, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR1, Periphs) == Periphs);
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR2, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR1 TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 LCDEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 RTCAPBEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 SPI3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 UART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 UART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 I2C3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 CRSEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 CAN1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 DAC1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 OPAMPEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR1 LPTIM1EN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR1, Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR2 LPUART1EN LL_APB1_GRP2_DisableClock\n
+ * APB1ENR2 SWPMI1EN LL_APB1_GRP2_DisableClock\n
+ * APB1ENR2 LPTIM2EN LL_APB1_GRP2_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR2, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 LCDRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 SPI3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 UART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 UART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 I2C3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 CRSRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 CAN1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 DAC1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR1, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ForceReset\n
+ * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ForceReset\n
+ * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR2, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 LCDRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 SPI3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 UART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 UART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 I2C3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 CRSRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 CAN1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 DAC1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 OPAMPRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR1 LPTIM1RST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR1, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR2 LPUART1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB1RSTR2 SWPMI1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB1RSTR2 LPTIM2RST LL_APB1_GRP2_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR2, Periphs);
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 LCDSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 USART2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 USART3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 UART4SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 UART5SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 CRSSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 PWRSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_EnableClockStopSleep\n
+ * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1SMENR1, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1SMENR1, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
+ * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_EnableClockStopSleep\n
+ * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1SMENR2, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1SMENR2, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR1 TIM2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM6SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 TIM7SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 LCDSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 RTCAPBSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 WWDGSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 SPI2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 SPI3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 USART2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 USART3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 UART4SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 UART5SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C2SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 I2C3SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 CRSSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 CAN1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 PWRSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 DAC1SMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 OPAMPSMEN LL_APB1_GRP1_DisableClockStopSleep\n
+ * APB1SMENR1 LPTIM1SMEN LL_APB1_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_RTCAPB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @arg @ref LL_APB1_GRP1_PERIPH_OPAMP
+ * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1SMENR1, Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB1SMENR2 LPUART1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
+ * APB1SMENR2 SWPMI1SMEN LL_APB1_GRP2_DisableClockStopSleep\n
+ * APB1SMENR2 LPTIM2SMEN LL_APB1_GRP2_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPUART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SWPMI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_LPTIM2
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1SMENR2, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB2 APB2
+ * @{
+ */
+
+/**
+ * @brief Enable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR FWEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_FW
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB2 peripheral clock is enabled or not
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR FWEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_FW
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB2 peripherals clock.
+ * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDMMC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM15EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM16EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM17EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SAI2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR DFSDM1EN LL_APB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB2 peripherals reset.
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDMMC1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM15RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM16RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM17RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SAI2RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR DFSDM1RST LL_APB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM8SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM15SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM16SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR TIM17SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SAI1SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR SAI2SMEN LL_APB2_GRP1_EnableClockStopSleep\n
+ * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_EnableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClockStopSleep(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2SMENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2SMENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB2 peripheral clocks in Sleep and Stop modes
+ * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SDMMC1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM8SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM15SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM16SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR TIM17SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SAI1SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR SAI2SMEN LL_APB2_GRP1_DisableClockStopSleep\n
+ * APB2SMENR DFSDM1SMEN LL_APB2_GRP1_DisableClockStopSleep
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDMMC1 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM15
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM16
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM17 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SAI2 (*)
+ * @arg @ref LL_APB2_GRP1_PERIPH_DFSDM1 (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2SMENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
