mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_B96B_F446VE/stm32f4xx_hal_rcc.h
- Revision:
- 122:f9eeca106725
- Parent:
- 116:c0f6e94411f5
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_B96B_F446VE/stm32f4xx_hal_rcc.h
--- a/TARGET_B96B_F446VE/stm32f4xx_hal_rcc.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_B96B_F446VE/stm32f4xx_hal_rcc.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f4xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.4.1
- * @date 09-October-2015
+ * @version V1.5.0
+ * @date 06-May-2016
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -76,18 +76,17 @@
uint32_t LSEState; /*!< The new state of the LSE.
This parameter can be a value of @ref RCC_LSE_Config */
-
+
uint32_t HSIState; /*!< The new state of the HSI.
This parameter can be a value of @ref RCC_HSI_Config */
- uint32_t HSICalibrationValue; /*!< The calibration trimming value.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
-
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
- RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
-
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
}RCC_OscInitTypeDef;
/**
@@ -124,11 +123,11 @@
/** @defgroup RCC_Oscillator_Type Oscillator Type
* @{
*/
-#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
-#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
-#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
-#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
-#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000U)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001U)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002U)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004U)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008U)
/**
* @}
*/
@@ -136,9 +135,9 @@
/** @defgroup RCC_HSE_Config HSE Config
* @{
*/
-#define RCC_HSE_OFF ((uint8_t)0x00)
-#define RCC_HSE_ON ((uint8_t)0x01)
-#define RCC_HSE_BYPASS ((uint8_t)0x05)
+#define RCC_HSE_OFF ((uint8_t)0x00U)
+#define RCC_HSE_ON ((uint8_t)0x01U)
+#define RCC_HSE_BYPASS ((uint8_t)0x05U)
/**
* @}
*/
@@ -146,9 +145,9 @@
/** @defgroup RCC_LSE_Config LSE Config
* @{
*/
-#define RCC_LSE_OFF ((uint8_t)0x00)
-#define RCC_LSE_ON ((uint8_t)0x01)
-#define RCC_LSE_BYPASS ((uint8_t)0x05)
+#define RCC_LSE_OFF ((uint8_t)0x00U)
+#define RCC_LSE_ON ((uint8_t)0x01U)
+#define RCC_LSE_BYPASS ((uint8_t)0x05U)
/**
* @}
*/
@@ -156,8 +155,10 @@
/** @defgroup RCC_HSI_Config HSI Config
* @{
*/
-#define RCC_HSI_OFF ((uint8_t)0x00)
-#define RCC_HSI_ON ((uint8_t)0x01)
+#define RCC_HSI_OFF ((uint8_t)0x00U)
+#define RCC_HSI_ON ((uint8_t)0x01U)
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10U) /* Default HSI calibration trimming value */
/**
* @}
*/
@@ -165,8 +166,8 @@
/** @defgroup RCC_LSI_Config LSI Config
* @{
*/
-#define RCC_LSI_OFF ((uint8_t)0x00)
-#define RCC_LSI_ON ((uint8_t)0x01)
+#define RCC_LSI_OFF ((uint8_t)0x00U)
+#define RCC_LSI_ON ((uint8_t)0x01U)
/**
* @}
*/
@@ -174,9 +175,9 @@
/** @defgroup RCC_PLL_Config PLL Config
* @{
*/
-#define RCC_PLL_NONE ((uint8_t)0x00)
-#define RCC_PLL_OFF ((uint8_t)0x01)
-#define RCC_PLL_ON ((uint8_t)0x02)
+#define RCC_PLL_NONE ((uint8_t)0x00U)
+#define RCC_PLL_OFF ((uint8_t)0x01U)
+#define RCC_PLL_ON ((uint8_t)0x02U)
/**
* @}
*/
@@ -184,10 +185,10 @@
/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
* @{
*/
-#define RCC_PLLP_DIV2 ((uint32_t)0x00000002)
-#define RCC_PLLP_DIV4 ((uint32_t)0x00000004)
-#define RCC_PLLP_DIV6 ((uint32_t)0x00000006)
-#define RCC_PLLP_DIV8 ((uint32_t)0x00000008)
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002U)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004U)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006U)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008U)
/**
* @}
*/
@@ -204,10 +205,10 @@
/** @defgroup RCC_System_Clock_Type System Clock Type
* @{
*/
-#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
-#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
-#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
-#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001U)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002U)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004U)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008U)
/**
* @}
*/
@@ -229,7 +230,7 @@
#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
-#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) /*!< PLLR used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SWS_0 | RCC_CFGR_SWS_1)) /*!< PLLR used as system clock */
/**
* @}
*/
@@ -265,38 +266,38 @@
/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
* @{
*/
-#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100)
-#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200)
-#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300)
-#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300)
-#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300)
-#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300)
-#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300)
-#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300)
-#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300)
-#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300)
-#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300)
-#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300)
-#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300)
-#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300)
-#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300)
-#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300)
-#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300)
-#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300)
-#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300)
-#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300)
-#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300)
-#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300)
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100U)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200U)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300U)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300U)
/**
* @}
*/
@@ -304,8 +305,8 @@
/** @defgroup RCC_MCO_Index MCO Index
* @{
*/
-#define RCC_MCO1 ((uint32_t)0x00000000)
-#define RCC_MCO2 ((uint32_t)0x00000001)
+#define RCC_MCO1 ((uint32_t)0x00000000U)
+#define RCC_MCO2 ((uint32_t)0x00000001U)
/**
* @}
*/
@@ -313,7 +314,7 @@
/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
* @{
*/
-#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000U)
#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
@@ -324,7 +325,7 @@
/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
* @{
*/
-#define RCC_MCODIV_1 ((uint32_t)0x00000000)
+#define RCC_MCODIV_1 ((uint32_t)0x00000000U)
#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
@@ -336,13 +337,13 @@
/** @defgroup RCC_Interrupt Interrupts
* @{
*/
-#define RCC_IT_LSIRDY ((uint8_t)0x01)
-#define RCC_IT_LSERDY ((uint8_t)0x02)
-#define RCC_IT_HSIRDY ((uint8_t)0x04)
-#define RCC_IT_HSERDY ((uint8_t)0x08)
-#define RCC_IT_PLLRDY ((uint8_t)0x10)
-#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
-#define RCC_IT_CSS ((uint8_t)0x80)
+#define RCC_IT_LSIRDY ((uint8_t)0x01U)
+#define RCC_IT_LSERDY ((uint8_t)0x02U)
+#define RCC_IT_HSIRDY ((uint8_t)0x04U)
+#define RCC_IT_HSERDY ((uint8_t)0x08U)
+#define RCC_IT_PLLRDY ((uint8_t)0x10U)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20U)
+#define RCC_IT_CSS ((uint8_t)0x80U)
/**
* @}
*/
@@ -357,23 +358,23 @@
* @{
*/
/* Flags in the CR register */
-#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
-#define RCC_FLAG_HSERDY ((uint8_t)0x31)
-#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
-#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21U)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31U)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39U)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3BU)
/* Flags in the BDCR register */
-#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+#define RCC_FLAG_LSERDY ((uint8_t)0x41U)
/* Flags in the CSR register */
-#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
-#define RCC_FLAG_BORRST ((uint8_t)0x79)
-#define RCC_FLAG_PINRST ((uint8_t)0x7A)
-#define RCC_FLAG_PORRST ((uint8_t)0x7B)
-#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
-#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
-#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
-#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61U)
+#define RCC_FLAG_BORRST ((uint8_t)0x79U)
+#define RCC_FLAG_PINRST ((uint8_t)0x7AU)
+#define RCC_FLAG_PORRST ((uint8_t)0x7BU)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7CU)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7DU)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7EU)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7FU)
/**
* @}
*/
@@ -394,48 +395,48 @@
* using it.
* @{
*/
-#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
UNUSED(tmpreg); \
- } while(0)
-#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ } while(0)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
UNUSED(tmpreg); \
- } while(0)
-#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ } while(0)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
UNUSED(tmpreg); \
- } while(0)
-#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ } while(0)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
UNUSED(tmpreg); \
- } while(0)
-#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ } while(0)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
@@ -443,11 +444,34 @@
#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
-
/**
* @}
*/
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) != RESET)
+
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA1EN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHB1ENR &(RCC_AHB1ENR_DMA2EN)) == RESET)
+/**
+ * @}
+ */
+
/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
* @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
@@ -456,54 +480,54 @@
* @{
*/
#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_USART2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_PWR_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
@@ -516,7 +540,33 @@
* @}
*/
-/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
* @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
@@ -524,61 +574,61 @@
* @{
*/
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_USART1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_USART6_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
+ __IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
/* Delay after an RCC peripheral clock enabling */ \
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
UNUSED(tmpreg); \
- } while(0)
+ } while(0)
#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
@@ -592,11 +642,39 @@
* @}
*/
+/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+ * @brief Get the enable or disable status of the APB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+/**
+ * @}
+ */
+
/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
* @brief Force or release AHB1 peripheral reset.
* @{
*/
-#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
@@ -604,7 +682,7 @@
#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
-#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00)
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00U)
#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
@@ -619,7 +697,7 @@
* @brief Force or release APB1 peripheral reset.
* @{
*/
-#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
@@ -628,7 +706,7 @@
#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
-#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00U)
#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
@@ -644,7 +722,7 @@
* @brief Force or release APB2 peripheral reset.
* @{
*/
-#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
@@ -654,7 +732,7 @@
#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
-#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00U)
#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
@@ -774,6 +852,7 @@
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * (default is RCC_HSICALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 0x1F.
*/
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
@@ -890,10 +969,10 @@
* RTC clock source).
*/
#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFFU)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
- RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFFU); \
} while (0)
/** @brief Macros to force or release the Backup domain reset.
@@ -943,8 +1022,8 @@
#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
/**
* @}
- */
-
+ */
+
/** @defgroup RCC_Get_Clock_source Get Clock source
* @{
*/
@@ -999,10 +1078,9 @@
* @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
* @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
*/
-
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
-
+
/** @brief Macro to configure the MCO2 clock.
* @param __MCOCLKSOURCE__ specifies the MCO clock source.
* This parameter can be one of the following values:
@@ -1018,12 +1096,11 @@
* @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
* @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
* @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
- * @note For STM32F410Rx devices to output I2SCLK clock on MCO2 you should have
- * at last one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
+ * @note For STM32F410Rx devices, to output I2SCLK clock on MCO2, you should have
+ * at least one of the SPI clocks enabled (SPI1, SPI2 or SPI5).
*/
-
#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
- MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (__MCOCLKSOURCE__ | (__MCODIV__ << 3)));
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3U)));
/**
* @}
*/
@@ -1057,7 +1134,7 @@
* @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
* @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
*/
-#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
* bits to clear the selected interrupt pending bits.
@@ -1110,8 +1187,8 @@
* @arg RCC_FLAG_LPWRRST: Low Power reset.
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
-#define RCC_FLAG_MASK ((uint8_t)0x1F)
-#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+#define RCC_FLAG_MASK ((uint8_t)0x1FU)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5U) == 1U)? RCC->CR :((((__FLAG__) >> 5U) == 2U) ? RCC->BDCR :((((__FLAG__) >> 5U) == 3U)? RCC->CSR :RCC->CIR))) & ((uint32_t)1U << ((__FLAG__) & RCC_FLAG_MASK)))!= 0U)? 1U : 0U)
/**
* @}
@@ -1179,49 +1256,49 @@
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
/* --- CR Register ---*/
/* Alias word address of HSION bit */
-#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
-#define RCC_HSION_BIT_NUMBER 0x00
-#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_HSION_BIT_NUMBER * 4))
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00U)
+#define RCC_HSION_BIT_NUMBER 0x00U
+#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_HSION_BIT_NUMBER * 4U))
/* Alias word address of CSSON bit */
-#define RCC_CSSON_BIT_NUMBER 0x13
-#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_CSSON_BIT_NUMBER * 4))
+#define RCC_CSSON_BIT_NUMBER 0x13U
+#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_CSSON_BIT_NUMBER * 4U))
/* Alias word address of PLLON bit */
-#define RCC_PLLON_BIT_NUMBER 0x18
-#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLON_BIT_NUMBER * 4))
+#define RCC_PLLON_BIT_NUMBER 0x18U
+#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32U) + (RCC_PLLON_BIT_NUMBER * 4U))
/* --- BDCR Register ---*/
/* Alias word address of RTCEN bit */
-#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70)
-#define RCC_RTCEN_BIT_NUMBER 0x0F
-#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_RTCEN_BIT_NUMBER * 4))
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70U)
+#define RCC_RTCEN_BIT_NUMBER 0x0FU
+#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_RTCEN_BIT_NUMBER * 4U))
/* Alias word address of BDRST bit */
-#define RCC_BDRST_BIT_NUMBER 0x10
-#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_BDRST_BIT_NUMBER * 4))
+#define RCC_BDRST_BIT_NUMBER 0x10U
+#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32U) + (RCC_BDRST_BIT_NUMBER * 4U))
/* --- CSR Register ---*/
/* Alias word address of LSION bit */
-#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74)
-#define RCC_LSION_BIT_NUMBER 0x00
-#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RCC_LSION_BIT_NUMBER * 4))
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74U)
+#define RCC_LSION_BIT_NUMBER 0x00U
+#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32U) + (RCC_LSION_BIT_NUMBER * 4U))
/* CR register byte 3 (Bits[23:16]) base address */
-#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802)
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802U)
/* CIR register byte 2 (Bits[15:8]) base address */
-#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x01U))
/* CIR register byte 3 (Bits[23:16]) base address */
-#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0CU + 0x02U))
/* BDCR register base address */
#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
-#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
-#define RCC_LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5000 ms */
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)2U)
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
-#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define HSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)2U) /* 2 ms */
/**
* @}
@@ -1232,14 +1309,14 @@
*/
/* Private macros ------------------------------------------------------------*/
-/** @addtogroup RCC_Private_Macros RCC Private Macros
+/** @defgroup RCC_Private_Macros RCC Private Macros
* @{
*/
/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
* @{
*/
-#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15U)
#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
((HSE) == RCC_HSE_BYPASS))
@@ -1260,14 +1337,45 @@
((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
-
-#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
-#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV6) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV10) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV12) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV14) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV18) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV20) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV22) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV24) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV26) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV28) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV30) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63U)
-#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2U) || ((VALUE) == 4U) || ((VALUE) == 6U) || ((VALUE) == 8U))
-#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4U <= (VALUE)) && ((VALUE) <= 15U))
#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
@@ -1275,7 +1383,7 @@
((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
((HCLK) == RCC_SYSCLK_DIV512))
-#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+#define IS_RCC_CLOCKTYPE(CLK) ((1U <= (CLK)) && ((CLK) <= 15U))
#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
@@ -1289,7 +1397,7 @@
#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
((DIV) == RCC_MCODIV_5))
-#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1FU)
/**
* @}
