Diff: TARGET_VK_RZ_A1H/irq_ctrl.h

Revision:

165:d1b4690b3f8b

Child:

169:a7c7b631e539

diff -r 994bdf8177cb -r d1b4690b3f8b TARGET_VK_RZ_A1H/irq_ctrl.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_VK_RZ_A1H/irq_ctrl.h	Thu Apr 19 14:31:27 2018 +0100
@@ -0,0 +1,180 @@
+/**************************************************************************//**
+ * @file     irq_ctrl.h
+ * @brief    Interrupt Controller API header file
+ * @version  V1.0.0
+ * @date     23. June 2017
+ ******************************************************************************/
+/*
+ * Copyright (c) 2017 ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef IRQ_CTRL_H_
+#define IRQ_CTRL_H_
+
+#include <stdint.h>
+
+#ifndef IRQHANDLER_T
+#define IRQHANDLER_T
+/// Interrupt handler data type
+typedef void (*IRQHandler_t) (void);
+#endif
+
+#ifndef IRQN_ID_T
+#define IRQN_ID_T
+/// Interrupt ID number data type
+typedef int32_t IRQn_ID_t;
+#endif
+
+/* Interrupt mode bit-masks */
+#define IRQ_MODE_TRIG_Pos           (0U)
+#define IRQ_MODE_TRIG_Msk           (0x07UL /*<< IRQ_MODE_TRIG_Pos*/)
+#define IRQ_MODE_TRIG_LEVEL         (0x00UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: level triggered interrupt
+#define IRQ_MODE_TRIG_LEVEL_LOW     (0x01UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: low level triggered interrupt
+#define IRQ_MODE_TRIG_LEVEL_HIGH    (0x02UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: high level triggered interrupt
+#define IRQ_MODE_TRIG_EDGE          (0x04UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: edge triggered interrupt
+#define IRQ_MODE_TRIG_EDGE_RISING   (0x05UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising edge triggered interrupt
+#define IRQ_MODE_TRIG_EDGE_FALLING  (0x06UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: falling edge triggered interrupt
+#define IRQ_MODE_TRIG_EDGE_BOTH     (0x07UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising and falling edge triggered interrupt
+
+#define IRQ_MODE_TYPE_Pos           (3U)
+#define IRQ_MODE_TYPE_Msk           (0x01UL << IRQ_MODE_TYPE_Pos)
+#define IRQ_MODE_TYPE_IRQ           (0x00UL << IRQ_MODE_TYPE_Pos)     ///< Type: interrupt source triggers CPU IRQ line
+#define IRQ_MODE_TYPE_FIQ           (0x01UL << IRQ_MODE_TYPE_Pos)     ///< Type: interrupt source triggers CPU FIQ line
+
+#define IRQ_MODE_DOMAIN_Pos         (4U)
+#define IRQ_MODE_DOMAIN_Msk         (0x01UL << IRQ_MODE_DOMAIN_Pos)
+#define IRQ_MODE_DOMAIN_NONSECURE   (0x00UL << IRQ_MODE_DOMAIN_Pos)   ///< Domain: interrupt is targeting non-secure domain
+#define IRQ_MODE_DOMAIN_SECURE      (0x01UL << IRQ_MODE_DOMAIN_Pos)   ///< Domain: interrupt is targeting secure domain
+
+#define IRQ_MODE_CPU_Pos            (5U)
+#define IRQ_MODE_CPU_Msk            (0xFFUL << IRQ_MODE_CPU_Pos)
+#define IRQ_MODE_CPU_ALL            (0x00UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets all CPUs
+#define IRQ_MODE_CPU_0              (0x01UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 0
+#define IRQ_MODE_CPU_1              (0x02UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 1
+#define IRQ_MODE_CPU_2              (0x04UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 2
+#define IRQ_MODE_CPU_3              (0x08UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 3
+#define IRQ_MODE_CPU_4              (0x10UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 4
+#define IRQ_MODE_CPU_5              (0x20UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 5
+#define IRQ_MODE_CPU_6              (0x40UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 6
+#define IRQ_MODE_CPU_7              (0x80UL << IRQ_MODE_CPU_Pos)      ///< CPU: interrupt targets CPU 7
+
+#define IRQ_MODE_ERROR              (0x80000000UL)                    ///< Bit indicating mode value error
+
+/* Interrupt priority bit-masks */
+#define IRQ_PRIORITY_Msk            (0x0000FFFFUL)                    ///< Interrupt priority value bit-mask
+#define IRQ_PRIORITY_ERROR          (0x80000000UL)                    ///< Bit indicating priority value error
+
+/// Initialize interrupt controller.
+/// \return 0 on success, -1 on error.
+int32_t IRQ_Initialize (void);
+
+/// Register interrupt handler.
+/// \param[in]     irqn          interrupt ID number
+/// \param[in]     handler       interrupt handler function address
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetHandler (IRQn_ID_t irqn, IRQHandler_t handler);
+
+/// Get the registered interrupt handler.
+/// \param[in]     irqn          interrupt ID number
+/// \return registered interrupt handler function address.
+IRQHandler_t IRQ_GetHandler (IRQn_ID_t irqn);
+
+/// Enable interrupt.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 on success, -1 on error.
+int32_t IRQ_Enable (IRQn_ID_t irqn);
+
+/// Disable interrupt.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 on success, -1 on error.
+int32_t IRQ_Disable (IRQn_ID_t irqn);
+
+/// Get interrupt enable state.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 - interrupt is disabled, 1 - interrupt is enabled.
+uint32_t IRQ_GetEnableState (IRQn_ID_t irqn);
+
+/// Configure interrupt request mode.
+/// \param[in]     irqn          interrupt ID number
+/// \param[in]     mode          mode configuration
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetMode (IRQn_ID_t irqn, uint32_t mode);
+
+/// Get interrupt mode configuration.
+/// \param[in]     irqn          interrupt ID number
+/// \return current interrupt mode configuration with optional IRQ_MODE_ERROR bit set.
+uint32_t IRQ_GetMode (IRQn_ID_t irqn);
+
+/// Get ID number of current interrupt request (IRQ).
+/// \return interrupt ID number.
+IRQn_ID_t IRQ_GetActiveIRQ (void);
+
+/// Get ID number of current fast interrupt request (FIQ).
+/// \return interrupt ID number.
+IRQn_ID_t IRQ_GetActiveFIQ (void);
+
+/// Signal end of interrupt processing.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 on success, -1 on error.
+int32_t IRQ_EndOfInterrupt (IRQn_ID_t irqn);
+
+/// Set interrupt pending flag.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetPending (IRQn_ID_t irqn);
+
+/// Get interrupt pending flag.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 - interrupt is not pending, 1 - interrupt is pending.
+uint32_t IRQ_GetPending (IRQn_ID_t irqn);
+
+/// Clear interrupt pending flag.
+/// \param[in]     irqn          interrupt ID number
+/// \return 0 on success, -1 on error.
+int32_t IRQ_ClearPending (IRQn_ID_t irqn);
+
+/// Set interrupt priority value.
+/// \param[in]     irqn          interrupt ID number
+/// \param[in]     priority      interrupt priority value
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetPriority (IRQn_ID_t irqn, uint32_t priority);
+
+/// Get interrupt priority.
+/// \param[in]     irqn          interrupt ID number
+/// \return current interrupt priority value with optional IRQ_PRIORITY_ERROR bit set.
+uint32_t IRQ_GetPriority (IRQn_ID_t irqn);
+
+/// Set priority masking threshold.
+/// \param[in]     priority      priority masking threshold value
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetPriorityMask (uint32_t priority);
+
+/// Get priority masking threshold
+/// \return current priority masking threshold value with optional IRQ_PRIORITY_ERROR bit set.
+uint32_t IRQ_GetPriorityMask (void);
+
+/// Set priority grouping field split point
+/// \param[in]     bits          number of MSB bits included in the group priority field comparison
+/// \return 0 on success, -1 on error.
+int32_t IRQ_SetPriorityGroupBits (uint32_t bits);
+
+/// Get priority grouping field split point
+/// \return current number of MSB bits included in the group priority field comparison with
+///         optional IRQ_PRIORITY_ERROR bit set.
+uint32_t IRQ_GetPriorityGroupBits (void);
+
+#endif  // IRQ_CTRL_H_