Diff: TARGET_NUCLEO_L152RE/stm32l1xx_hal_flash.h

Revision:

90:cb3d968589d8

Child:

122:f9eeca106725

diff -r 552587b429a1 -r cb3d968589d8 TARGET_NUCLEO_L152RE/stm32l1xx_hal_flash.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_hal_flash.h	Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,385 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_hal_flash.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    5-September-2014
+  * @brief   Header file of Flash HAL module.
+  ******************************************************************************
+  * @attention
+  *   
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_FLASH_H
+#define __STM32L1xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */  
+
+/**
+  * @brief  FLASH Error structure definition
+  */
+typedef enum
+{ 
+  FLASH_ERROR_SIZE      = 0x01,
+  FLASH_ERROR_OPTV      = 0x02,
+  FLASH_ERROR_OPTVUSR   = 0x04,
+  FLASH_ERROR_PGA       = 0x08,
+  FLASH_ERROR_WRP       = 0x10,
+  FLASH_ERROR_RD        = 0x20,
+  FLASH_ERROR_OPERATION = 0x40
+}FLASH_ErrorTypeDef;
+
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE = 0, 
+  FLASH_PROC_PAGEERASE,
+  FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+  
+  __IO uint32_t               NbPagesToErase;    /*Internal variable to save the remaining sectors to erase in IT context*/
+  
+  __IO uint32_t               Page;              /*Internal variable to define the current sector which is erasing*/
+  
+  __IO uint32_t               Address;           /*Internal variable to save address selected for program*/
+  
+  HAL_LockTypeDef             Lock;               /* FLASH locking object                */
+
+  __IO FLASH_ErrorTypeDef     ErrorCode;          /* FLASH error code                    */
+
+}FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup FLASH_Internal_Variables
+  * @{
+  */  
+
+/**
+  * @brief  Variable used for Program/Erase sectors under interruption.
+  *     Put as extern as used also in flash_ex.c. 
+  */
+extern FLASH_ProcessTypeDef      ProcFlash;
+
+/**
+  * @}
+  */ 
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+#define HAL_FLASH_TIMEOUT_VALUE   ((uint32_t)50000) /* 50 s */
+
+#define FLASH_PAGE_SIZE           ((uint32_t)256)
+  
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define TYPEPROGRAM_WORD        ((uint32_t)0x02)  /*!< Program a word (32-bit) at a specified address        */
+
+#define IS_TYPEPROGRAMFLASH(_VALUE_)   (((_VALUE_) == TYPEPROGRAM_WORD))  
+
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Latency FLASH Latency 
+  * @{
+  */ 
+#define FLASH_LATENCY_0                ((uint8_t)0x00)  /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1                ((uint8_t)0x01)  /*!< FLASH One Latency cycle */
+
+#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
+                                   ((__LATENCY__) == FLASH_LATENCY_1))
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Interrupts FLASH Interrupts 
+  * @{
+  */
+   
+#define FLASH_IT_EOP               FLASH_PECR_EOPIE  /*!< End of programming interrupt source */
+#define FLASH_IT_ERR               FLASH_PECR_ERRIE  /*!< Error interrupt source */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Flags FLASH Flags 
+  * @{
+  */ 
+
+#define FLASH_FLAG_BSY             FLASH_SR_BSY        /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP             FLASH_SR_EOP        /*!< FLASH End of Programming flag */
+#define FLASH_FLAG_ENDHV           FLASH_SR_ENDHV      /*!< FLASH End of High Voltage flag */
+#define FLASH_FLAG_READY           FLASH_SR_READY      /*!< FLASH Ready flag after low power mode */
+#define FLASH_FLAG_WRPERR          FLASH_SR_WRPERR     /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR          FLASH_SR_PGAERR     /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_SIZERR          FLASH_SR_SIZERR     /*!< FLASH Size error flag  */
+#define FLASH_FLAG_OPTVERR         FLASH_SR_OPTVERR    /*!< FLASH Option Validity error flag  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Keys FLASH Keys 
+  * @{
+  */ 
+
+#define FLASH_PDKEY1               ((uint32_t)0x04152637) /*!< Flash power down key1 */
+#define FLASH_PDKEY2               ((uint32_t)0xFAFBFCFD) /*!< Flash power down key2: used with FLASH_PDKEY1 
+                                                              to unlock the RUN_PD bit in FLASH_ACR */
+
+#define FLASH_PEKEY1               ((uint32_t)0x89ABCDEF) /*!< Flash program erase key1 */
+#define FLASH_PEKEY2               ((uint32_t)0x02030405) /*!< Flash program erase key: used with FLASH_PEKEY2
+                                                               to unlock the write access to the FLASH_PECR register and
+                                                               data EEPROM */
+
+#define FLASH_PRGKEY1              ((uint32_t)0x8C9DAEBF) /*!< Flash program memory key1 */
+#define FLASH_PRGKEY2              ((uint32_t)0x13141516) /*!< Flash program memory key2: used with FLASH_PRGKEY2
+                                                               to unlock the program memory */
+
+#define FLASH_OPTKEY1              ((uint32_t)0xFBEAD9C8) /*!< Flash option key1 */
+#define FLASH_OPTKEY2              ((uint32_t)0x24252627) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+                                                              unlock the write access to the option byte block */
+/**
+  * @}
+  */
+  
+
+
+#if defined ( __ICCARM__ )   
+#define InterruptType_ACTLR_DISMCYCINT_Msk         IntType_ACTLR_DISMCYCINT_Msk
+#endif
+
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+  * @{
+  */  
+
+/** @defgroup FLASH_Interrupt FLASH Interrupts
+ *  @brief macros to handle FLASH interrupts
+ * @{
+ */ 
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  ((FLASH->PECR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  ((FLASH->PECR) &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_FLAG_BSY   :              FLASH Busy flag
+  *            @arg FLASH_FLAG_EOP   :              FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_ENDHV :            FLASH End of High Voltage flag
+  *            @arg FLASH_FLAG_READY:             FLASH Ready flag after low power mode
+  *            @arg FLASH_FLAG_WRPERR:           FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR:           FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_SIZERR:            FLASH Size error flag
+  *            @arg FLASH_FLAG_OPTVERR:          FLASH Option validity error error flag
+  *            @arg FLASH_FLAG_OPTVERRUSR :   FLASH Option UserValidity (available only Cat.3, Cat.4 and Cat.5 devices)
+  *            @arg FLASH_FLAG_RDERR :            FLASH Read Protection error flag (PCROP) (available only Cat.2 and Cat.3 devices)
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   (((FLASH->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_BSY   :              FLASH Busy flag
+  *            @arg FLASH_FLAG_EOP   :              FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_ENDHV :            FLASH End of High Voltage flag
+  *            @arg FLASH_FLAG_READY:             FLASH Ready flag after low power mode
+  *            @arg FLASH_FLAG_WRPERR:           FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR:           FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_SIZERR:            FLASH Size error flag
+  *            @arg FLASH_FLAG_OPTVERR:          FLASH Option validity error error flag
+  *            @arg FLASH_FLAG_OPTVERRUSR :   FLASH Option UserValidity (available only Cat.3, Cat.4 and Cat.5 devices)
+  *            @arg FLASH_FLAG_RDERR :            FLASH Read Protection error flag (PCROP) (available only Cat.2 and Cat.3 devices)
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   ((FLASH->SR) = (__FLAG__))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Include FLASH HAL Extension module */
+#include "stm32l1xx_hal_flash_ex.h"
+#include "stm32l1xx_hal_flash_ramfunc.h"
+
+/* Exported functions ------------------------------------------------------- */
+
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+
+/** 
+  * @brief  FLASH memory functions that can be executed from FLASH.  
+  */  
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef   HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef   HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler function */
+void                HAL_FLASH_IRQHandler(void);
+
+/* Callbacks in non blocking modes */
+void                HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void                HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); 
+  
+/**
+  * @}
+  */ 
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+
+/* FLASH Memory Programming functions *****************************************/   
+HAL_StatusTypeDef   HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef   HAL_FLASH_Lock(void);
+
+/* Option Bytes Programming functions *****************************************/
+HAL_StatusTypeDef   HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef   HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef   HAL_FLASH_OB_Launch(void);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+
+/* Peripheral State methods  **************************************************/
+FLASH_ErrorTypeDef  HAL_FLASH_GetError(void);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup FLASH_Internal_Functions
+  * @{
+  */
+
+/** 
+  * @brief  Function used internally by HAL FLASH driver. 
+  */  
+HAL_StatusTypeDef   FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/