mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_spi.h
- Revision:
- 96:487b796308b0
- Parent:
- 92:4fc01daae5a5
- Child:
- 119:aae6fcc7d9bb
diff -r 7e07b6fb45cf -r 487b796308b0 TARGET_NUCLEO_L053R8/stm32l0xx_hal_spi.h
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_spi.h Wed Mar 04 07:31:39 2015 +0100
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_spi.h Tue Mar 17 14:27:45 2015 +0000
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l0xx_hal_spi.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 18-June-2014
+ * @version V1.2.0
+ * @date 06-February-2015
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -55,6 +55,9 @@
*/
/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
/**
* @brief SPI Configuration Structure definition
@@ -116,206 +119,176 @@
}HAL_SPI_StateTypeDef;
/**
- * @brief HAL SPI Error Code structure definition
- */
-typedef enum
-{
- HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
- HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
- HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
- HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
- HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
- HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SPI_ERROR_FLAG = 0x20 /*!< Flag: RXNE,TXE, BSY */
-
-}HAL_SPI_ErrorTypeDef;
-
-/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
- SPI_TypeDef *Instance; /* SPI registers base address */
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
- SPI_InitTypeDef Init; /* SPI communication parameters */
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx transfer size */
+ uint16_t TxXferSize; /*!< SPI Tx transfer size */
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx transfer size */
+ uint16_t RxXferSize; /*!< SPI Rx transfer size */
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA handle parameters */
- void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /*!< function pointer on Rx ISR */
- void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /*!< function pointer on Tx ISR */
- HAL_LockTypeDef Lock; /* SPI locking object */
+ HAL_LockTypeDef Lock; /*!< SPI locking object */
- __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+ __IO HAL_SPI_StateTypeDef State; /*!< SPI communication state */
- __IO HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+ __IO uint32_t ErrorCode; /*!< SPI Error code */
}SPI_HandleTypeDef;
+/**
+ * @}
+ */
+
/* Exported constants --------------------------------------------------------*/
-/** @defgroup SPI_Exported_Constants
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
* @{
*/
-/** @defgroup SPI_mode
+/**
+ * @defgroup SPI_ErrorCode SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_SPI_ERROR_MODF ((uint32_t)0x01) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC ((uint32_t)0x02) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR ((uint32_t)0x04) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE ((uint32_t)0x08) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG ((uint32_t)0x20) /*!< Flag: RXNE,TXE, BSY */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode SPI mode
* @{
*/
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
-#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
- ((MODE) == SPI_MODE_MASTER))
/**
* @}
*/
-/** @defgroup SPI_Direction_mode
+/** @defgroup SPI_Direction_mode SPI Direction mode
* @{
*/
-#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
-#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
-#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
-
-#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
- ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
- ((MODE) == SPI_DIRECTION_1LINE))
-
-#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
- ((MODE) == SPI_DIRECTION_1LINE))
-
-#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
/**
* @}
*/
-/** @defgroup SPI_data_size
+/** @defgroup SPI_data_size SPI data size
* @{
*/
#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
#define SPI_DATASIZE_16BIT SPI_CR1_DFF
-#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
- ((DATASIZE) == SPI_DATASIZE_8BIT))
/**
* @}
*/
-/** @defgroup SPI_Clock_Polarity
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
-#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
- ((CPOL) == SPI_POLARITY_HIGH))
/**
* @}
*/
-/** @defgroup SPI_Clock_Phase
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
-#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
- ((CPHA) == SPI_PHASE_2EDGE))
/**
* @}
*/
-/** @defgroup SPI_Slave_Select_management
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
-#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)(SPI_CR2_SSOE << 16))
-#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
- ((NSS) == SPI_NSS_HARD_INPUT) || \
- ((NSS) == SPI_NSS_HARD_OUTPUT))
/**
* @}
*/
-/** @defgroup SPI_BaudRate_Prescaler
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
-#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
-#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
-#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
-#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
-#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
-#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
-#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
-#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
- ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
/**
* @}
*/
-/** @defgroup SPI_MSB_LSB_transmission
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
-#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
- ((BIT) == SPI_FIRSTBIT_LSB))
/**
* @}
*/
-/** @defgroup SPI_TI_mode
+/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
-#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
-#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLE SPI_CR2_FRF
-#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
- ((MODE) == SPI_TIMODE_ENABLED))
/**
* @}
*/
-/** @defgroup SPI_CRC_Calculation
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
-#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
-#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
- ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
/**
* @}
*/
-/** @defgroup SPI_Interrupt_configuration_definition
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
* @{
*/
#define SPI_IT_TXE SPI_CR2_TXEIE
@@ -325,7 +298,7 @@
* @}
*/
-/** @defgroup SPI_Flag_definition
+/** @defgroup SPI_Flag_definition SPI Flag definition
* @{
*/
#define SPI_FLAG_RXNE SPI_SR_RXNE
@@ -344,31 +317,46 @@
* @}
*/
+
/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
/** @brief Reset SPI handle state
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
-/** @brief Enable or disable the specified SPI interrupts.
+/** @brief Enable the specified SPI interrupts.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
-#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
/** @brief Check if the specified SPI interrupt source is enabled or disabled.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @param __INTERRUPT__: specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
@@ -380,7 +368,7 @@
/** @brief Check whether the specified SPI flag is set or not.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
@@ -396,55 +384,223 @@
/** @brief Clear the SPI CRCERR pending flag.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR &= (uint32_t)~((uint32_t)SPI_FLAG_CRCERR))
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
/** @brief Clear the SPI MODF pending flag.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @retval None
- */
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
- (__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)SPI_CR1_SPE);}while(0)
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+ UNUSED(tmpreg); \
+ } while(0)
/** @brief Clear the SPI OVR pending flag.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
- (__HANDLE__)->Instance->SR;}while(0)
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
/** @brief Clear the SPI FRE pending flag.
* @param __HANDLE__: specifies the SPI handle.
- * This parameter can be SPIx where x: 1, 2, or 3 to select the SPI peripheral.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Enables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+/**
+ * @}
+ */
+
+
+/* Private macros -----------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Checks if SPI Mode parameter is in allowed range.
+ * @param __MODE__: specifies the SPI Mode.
+ * This parameter can be a value of @ref SPI_mode
+ * @retval None
+ */
+#define IS_SPI_MODE(__MODE__) (((__MODE__) == SPI_MODE_SLAVE) || ((__MODE__) == SPI_MODE_MASTER))
+
+/** @brief Checks if SPI Direction Mode parameter is in allowed range.
+ * @param __MODE__: specifies the SPI Direction Mode.
+ * This parameter can be a value of @ref SPI_Direction_mode
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_MODE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Direction Mode parameter is 1 or 2 lines.
+ * @param __MODE__: specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(__MODE__) (((__MODE__) == SPI_DIRECTION_2LINES) || \
+ ((__MODE__) == SPI_DIRECTION_1LINE))
+
+/** @brief Checks if SPI Direction Mode parameter is 2 lines.
+ * @param __MODE__: specifies the SPI Direction Mode.
+ * @retval None
+ */
+#define IS_SPI_DIRECTION_2LINES(__MODE__) ((__MODE__) == SPI_DIRECTION_2LINES)
+
+/** @brief Checks if SPI Data Size parameter is in allowed range.
+ * @param __DATASIZE__: specifies the SPI Data Size.
+ * This parameter can be a value of @ref SPI_data_size
+ * @retval None
+ */
+#define IS_SPI_DATASIZE(__DATASIZE__) (((__DATASIZE__) == SPI_DATASIZE_16BIT) || \
+ ((__DATASIZE__) == SPI_DATASIZE_8BIT))
+
+/** @brief Checks if SPI Serial clock steady state parameter is in allowed range.
+ * @param __CPOL__: specifies the SPI serial clock steady state.
+ * This parameter can be a value of @ref SPI_Clock_Polarity
+ * @retval None
+ */
+#define IS_SPI_CPOL(__CPOL__) (((__CPOL__) == SPI_POLARITY_LOW) || \
+ ((__CPOL__) == SPI_POLARITY_HIGH))
+
+/** @brief Checks if SPI Clock Phase parameter is in allowed range.
+ * @param __CPHA__: specifies the SPI Clock Phase.
+ * This parameter can be a value of @ref SPI_Clock_Phase
* @retval None
*/
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+#define IS_SPI_CPHA(__CPHA__) (((__CPHA__) == SPI_PHASE_1EDGE) || \
+ ((__CPHA__) == SPI_PHASE_2EDGE))
+
+/** @brief Checks if SPI Slave select parameter is in allowed range.
+ * @param __NSS__: specifies the SPI Slave Slelect management parameter.
+ * This parameter can be a value of @ref SPI_Slave_Select_management
+ * @retval None
+ */
+#define IS_SPI_NSS(__NSS__) (((__NSS__) == SPI_NSS_SOFT) || \
+ ((__NSS__) == SPI_NSS_HARD_INPUT) || \
+ ((__NSS__) == SPI_NSS_HARD_OUTPUT))
-#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)SPI_CR1_SPE))
+/** @brief Checks if SPI Baudrate prescaler parameter is in allowed range.
+ * @param __PRESCALER__: specifies the SPI Baudrate prescaler.
+ * This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ * @retval None
+ */
+#define IS_SPI_BAUDRATE_PRESCALER(__PRESCALER__) (((__PRESCALER__) == SPI_BAUDRATEPRESCALER_2) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_4) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_8) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_16) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_32) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_64) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_128) || \
+ ((__PRESCALER__) == SPI_BAUDRATEPRESCALER_256))
-#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+/** @brief Checks if SPI MSB LSB transmission parameter is in allowed range.
+ * @param __BIT__: specifies the SPI MSB LSB transmission (whether data transfer starts from MSB or LSB bit).
+ * This parameter can be a value of @ref SPI_MSB_LSB_transmission
+ * @retval None
+ */
+#define IS_SPI_FIRST_BIT(__BIT__) (((__BIT__) == SPI_FIRSTBIT_MSB) || \
+ ((__BIT__) == SPI_FIRSTBIT_LSB))
-#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+/** @brief Checks if SPI TI mode parameter is in allowed range.
+ * @param __MODE__: specifies the SPI TI mode.
+ * This parameter can be a value of @ref SPI_TI_mode
+ * @retval None
+ */
+#define IS_SPI_TIMODE(__MODE__) (((__MODE__) == SPI_TIMODE_DISABLE) || \
+ ((__MODE__) == SPI_TIMODE_ENABLE))
+/** @brief Checks if SPI CRC calculation enabled state is in allowed range.
+ * @param __CALCULATION__: specifies the SPI CRC calculation enable state.
+ * This parameter can be a value of @ref SPI_CRC_Calculation
+ * @retval None
+ */
+#define IS_SPI_CRC_CALCULATION(__CALCULATION__) (((__CALCULATION__) == SPI_CRCCALCULATION_DISABLE) || \
+ ((__CALCULATION__) == SPI_CRCCALCULATION_ENABLE))
-#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)SPI_CR1_BIDIOE))
+/** @brief Checks if SPI polynomial value to be used for the CRC calculation, is in allowed range.
+ * @param __POLYNOMIAL__: specifies the SPI polynomial value to be used for the CRC calculation.
+ * This parameter must be a number between Min_Data = 0 and Max_Data = 65535
+ * @retval None
+ */
+#define IS_SPI_CRC_POLYNOMIAL(__POLYNOMIAL__) (((__POLYNOMIAL__) >= 0x1) && ((__POLYNOMIAL__) <= 0xFFFF))
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
-#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)SPI_CR1_CRCEN);\
- (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPIx where x: 1 or 2 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+ SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0)
+/**
+ * @}
+ */
/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
/* Initialization/de-initialization functions **********************************/
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
/* I/O operation functions *****************************************************/
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
@@ -466,10 +622,26 @@
void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
/* Peripheral State and Control functions **************************************/
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
-HAL_SPI_ErrorTypeDef HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
/**
* @}
@@ -486,3 +658,4 @@
#endif /* __STM32L0xx_HAL_SPI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
