Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_ble.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

diff -r e95d10626187 -r 3a7713b1edbc TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_ble.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_ble.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,635 @@
+/* 
+ * Copyright (c) 2000 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+/**
+  @addtogroup BLE_COMMON BLE SoftDevice Common
+  @{
+  @defgroup ble_api Events, type definitions and API calls
+  @{
+
+  @brief Module independent events, type definitions and API calls for the BLE SoftDevice.
+
+ */
+
+#ifndef NRF_BLE_H__
+#define NRF_BLE_H__
+
+#include "nrf_ble_ranges.h"
+#include "nrf_ble_types.h"
+#include "nrf_ble_gap.h"
+#include "nrf_ble_l2cap.h"
+#include "nrf_ble_gatt.h"
+#include "nrf_ble_gattc.h"
+#include "nrf_ble_gatts.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations
+ * @{ */
+
+/**
+ * @brief Common API SVC numbers.
+ */
+enum BLE_COMMON_SVCS
+{
+  SD_BLE_ENABLE = BLE_SVC_BASE,         /**< Enable and initialize the BLE stack */
+  SD_BLE_EVT_GET,                       /**< Get an event from the pending events queue. */
+  SD_BLE_TX_PACKET_COUNT_GET,           /**< Get the total number of available application transmission packets for a particular connection. */
+  SD_BLE_UUID_VS_ADD,                   /**< Add a Vendor Specific UUID. */
+  SD_BLE_UUID_DECODE,                   /**< Decode UUID bytes. */
+  SD_BLE_UUID_ENCODE,                   /**< Encode UUID bytes. */
+  SD_BLE_VERSION_GET,                   /**< Get the local version information (company id, Link Layer Version, Link Layer Subversion). */
+  SD_BLE_USER_MEM_REPLY,                /**< User Memory Reply. */
+  SD_BLE_OPT_SET,                       /**< Set a BLE option. */
+  SD_BLE_OPT_GET,                       /**< Get a BLE option. */
+};
+
+  /**
+   * @brief BLE Module Independent Event IDs.
+   */
+enum BLE_COMMON_EVTS
+{
+  BLE_EVT_TX_COMPLETE  = BLE_EVT_BASE,  /**< Transmission Complete. @ref ble_evt_tx_complete_t */
+  BLE_EVT_USER_MEM_REQUEST,             /**< User Memory request. @ref ble_evt_user_mem_request_t */
+  BLE_EVT_USER_MEM_RELEASE              /**< User Memory release. @ref ble_evt_user_mem_release_t */
+};
+
+/**@brief BLE connection bandwidth types.
+ * Bandwidth types supported by the SoftDevice in packets per connection interval.
+ */
+enum BLE_CONN_BWS
+{
+  BLE_CONN_BW_NONE = 0,
+  BLE_CONN_BW_LOW,
+  BLE_CONN_BW_MID,
+  BLE_CONN_BW_HIGH
+};
+
+/**@brief Common Option IDs.
+ * IDs that uniquely identify a common option.
+ */
+enum BLE_COMMON_OPTS
+{
+  BLE_COMMON_OPT_CONN_BW = BLE_OPT_BASE,     /**< Bandwidth configuration @ref ble_common_opt_conn_bw_t */
+  BLE_COMMON_OPT_PA_LNA                      /**< PA and LNA options */
+};
+
+/** @} */
+
+/** @addtogroup BLE_COMMON_DEFINES Defines
+ * @{ */
+
+/** @brief  Required pointer alignment for BLE Events.
+*/
+#define BLE_EVTS_PTR_ALIGNMENT    4
+
+/** @defgroup BLE_USER_MEM_TYPES User Memory Types
+ * @{ */
+#define BLE_USER_MEM_TYPE_INVALID               0x00  /**< Invalid User Memory Types. */
+#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES   0x01  /**< User Memory for GATTS queued writes. */
+/** @} */
+
+/** @defgroup BLE_UUID_VS_COUNTS Vendor Specific UUID counts
+ * @{
+ */
+#define BLE_UUID_VS_COUNT_MIN         1    /**< Minimum VS UUID count. */
+#define BLE_UUID_VS_COUNT_DEFAULT     0    /**< Use the default VS UUID count (10 for this version of the SoftDevice). */
+/** @} */
+
+/** @} */
+
+/** @addtogroup BLE_COMMON_STRUCTURES Structures
+ * @{ */
+
+/**@brief User Memory Block. */
+typedef struct
+{
+  uint8_t          *p_mem;      /**< Pointer to the start of the user memory block. */
+  uint16_t          len;        /**< Length in bytes of the user memory block. */
+} ble_user_mem_block_t;
+
+/**
+ * @brief Event structure for @ref BLE_EVT_TX_COMPLETE.
+ */
+typedef struct
+{
+  uint8_t count;                        /**< Number of packets transmitted. */
+} ble_evt_tx_complete_t;
+
+/**@brief Event structure for @ref BLE_EVT_USER_MEM_REQUEST. */
+typedef struct
+{
+  uint8_t                     type;     /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+} ble_evt_user_mem_request_t;
+
+/**@brief Event structure for @ref BLE_EVT_USER_MEM_RELEASE. */
+typedef struct
+{
+  uint8_t                     type;       /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+  ble_user_mem_block_t        mem_block;  /**< User memory block */
+} ble_evt_user_mem_release_t;
+
+
+/**@brief Event structure for events not associated with a specific function module. */
+typedef struct
+{
+  uint16_t conn_handle;                 /**< Connection Handle on which this event occurred. */
+  union
+  {
+    ble_evt_tx_complete_t           tx_complete;        /**< Transmission Complete. */
+    ble_evt_user_mem_request_t      user_mem_request;   /**< User Memory Request Event Parameters. */
+    ble_evt_user_mem_release_t      user_mem_release;   /**< User Memory Release Event Parameters. */
+  } params;
+} ble_common_evt_t;
+
+/**@brief BLE Event header. */
+typedef struct
+{
+  uint16_t evt_id;                /**< Value from a BLE_<module>_EVT series. */
+  uint16_t evt_len;               /**< Length in octets including this header. */
+} ble_evt_hdr_t;
+
+/**@brief Common BLE Event type, wrapping the module specific event reports. */
+typedef struct
+{
+  ble_evt_hdr_t header;           /**< Event header. */
+  union
+  {
+    ble_common_evt_t  common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
+    ble_gap_evt_t     gap_evt;    /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
+    ble_l2cap_evt_t   l2cap_evt;  /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
+    ble_gattc_evt_t   gattc_evt;  /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
+    ble_gatts_evt_t   gatts_evt;  /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
+  } evt;
+} ble_evt_t;
+
+
+/**
+ * @brief Version Information.
+ */
+typedef struct
+{
+  uint8_t   version_number;    /**< Link Layer Version number for BT 4.1 spec is 7 (https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer). */
+  uint16_t  company_id;        /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
+  uint16_t  subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */
+} ble_version_t;
+
+/* @brief: Configuration parameters for the PA and LNA. */
+typedef struct
+{
+     uint8_t enable :1;      /**< Enable toggling for this amplifier */
+     uint8_t active_high :1; /**< Set the pin to be active high */
+     uint8_t gpio_pin :6;    /**< The GPIO pin to toggle for this amplifier */
+} ble_pa_lna_cfg_t;
+
+/*
+ * @brief PA & LNA GPIO toggle configuration
+ *
+ * This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or
+ * a low noise amplifier.
+ *
+ * Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided
+ * by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled.
+ *
+ * @note  @ref sd_ble_opt_get is not supported for this option.
+ * @note  This feature is only supported for nRF52, on nRF51 @ref NRF_ERROR_NOT_SUPPORTED will always be returned.
+ * @note  Setting this option while the radio is in use (i.e. any of the roles are active) may have undefined consequences
+ * and must be avoided by the application.
+ *
+ */
+typedef struct
+{
+   ble_pa_lna_cfg_t pa_cfg;   /**< Power Amplifier configuration */
+   ble_pa_lna_cfg_t lna_cfg;  /**< Low Noise Amplifier configuration */
+
+   uint8_t ppi_ch_id_set;     /**< PPI channel used for radio pin setting */
+   uint8_t ppi_ch_id_clr;     /**< PPI channel used for radio pin clearing */
+   uint8_t gpiote_ch_id;      /**< GPIOTE channel used for radio pin toggling */
+} ble_common_opt_pa_lna_t;
+
+/**
+ * @brief BLE connection bandwidth configuration parameters
+ */
+typedef struct
+{
+  uint8_t conn_bw_tx;   /**< Connection bandwidth configuration for transmission, see @ref BLE_CONN_BWS.*/
+  uint8_t conn_bw_rx;   /**< Connection bandwidth configuration for reception, see @ref BLE_CONN_BWS.*/
+} ble_conn_bw_t;
+
+/**@brief BLE connection specific bandwidth configuration parameters.
+ *
+ * This can be used with @ref sd_ble_opt_set to set the bandwidth configuration to be used when creating connections.
+ *
+ * Call @ref sd_ble_opt_set with this option prior to calling @ref sd_ble_gap_adv_start or @ref sd_ble_gap_connect.
+ *
+ * The bandwidth configurations set via @ref sd_ble_opt_set are maintained separately for central and peripheral
+ * connections. The given configurations are used for all future connections of the role indicated in this structure
+ * unless they are changed by subsequent @ref sd_ble_opt_set calls.
+ *
+ * @note When this option is not used, the SoftDevice will use the default options:
+ * - @ref BLE_CONN_BW_HIGH for @ref BLE_GAP_ROLE_PERIPH connections (both transmission and reception).
+ * - @ref BLE_CONN_BW_MID for @ref BLE_GAP_ROLE_CENTRAL connections (both transmisison and reception).
+ * This option allows the application to selectively override these defaults for each role.
+ *
+ * @note The global memory pool configuration can be set with the @ref ble_conn_bw_counts_t configuration parameter, which
+ * is provided to @ref sd_ble_enable.
+ *
+ * @note Please refer to SoftDevice Specification for more information on bandwidth configuration.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_COMMON_CONF_BW}
+ * @endmscs
+ *
+ * @retval ::NRF_SUCCESS Set successfully.
+ * @retval ::BLE_ERROR_INVALID_ROLE The role is invalid.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid bandwidth configuration parameters.
+ * @retval ::NRF_ERROR_NOT_SUPPORTED If the combination of role and bandwidth configuration is not supported.
+ */
+typedef struct
+{
+  uint8_t            role;     /**< BLE role of the connection, see @ref BLE_GAP_ROLES. */
+  ble_conn_bw_t      conn_bw;  /**< Bandwidth configuration parameters. */
+} ble_common_opt_conn_bw_t;
+
+/**@brief Option structure for common options. */
+typedef union
+{
+  ble_common_opt_conn_bw_t conn_bw;       /**< Parameters for the connection bandwidth option. */
+  ble_common_opt_pa_lna_t  pa_lna;        /**< Parameters for controlling PA and LNA pin toggling. */
+} ble_common_opt_t;
+
+/**@brief Common BLE Option type, wrapping the module specific options. */
+typedef union
+{
+  ble_common_opt_t  common_opt;         /**< COMMON options, opt_id in @ref BLE_COMMON_OPTS series. */
+  ble_gap_opt_t     gap_opt;            /**< GAP option, opt_id in @ref BLE_GAP_OPTS series. */
+} ble_opt_t;
+
+/**
+ * @brief BLE bandwidth count parameters
+ *
+ * These parameters are used to configure the memory pools allocated within the SoftDevice for application packets
+ * (both transmission and reception) for all connections.
+ *
+ * @note The sum of all three counts must add up to the sum of @ref ble_gap_enable_params_t::central_conn_count and
+ * @ref ble_gap_enable_params_t::periph_conn_count in @ref ble_gap_enable_params_t.
+ */
+typedef struct {
+  uint8_t high_count;   /**< Total number of high bandwidth TX or RX memory pools available to the application at runtime for all active connections. */
+  uint8_t mid_count;    /**< Total number of medium bandwidth TX or RX memory pools available to the application at runtime for all active connections. */
+  uint8_t low_count;    /**< Total number of low bandwidth TX or RX memory pools available to the application at runtime for all active connections. */
+} ble_conn_bw_count_t;
+
+/**
+ * @brief BLE bandwidth global memory pool configuration parameters
+ *
+ * These configuration parameters are used to set the amount of memory dedicated to application packets for
+ * all connections. The application should specify the most demanding configuration for the intended use.
+ *
+ * Please refer to the SoftDevice Specification for more information on bandwidth configuration.
+ *
+ * @note Each connection created at runtime requires both a TX and an RX memory pool. By the use of these configuration
+ * parameters, the application can decide the size and total number of the global memory pools that will be later
+ * available for connection creation.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_COMMON_CONF_BW}
+ * @endmscs
+ *
+ */
+typedef struct {
+  ble_conn_bw_count_t tx_counts;   /**< Global memory pool configuration for transmission.*/
+  ble_conn_bw_count_t rx_counts;   /**< Global memory pool configuration for reception.*/
+} ble_conn_bw_counts_t;
+
+/**
+ * @brief BLE Common Initialization parameters.
+ *
+ * @note If @ref p_conn_bw_counts is NULL the SoftDevice will assume default bandwidth configuration for all connections.
+ * To fit a custom bandwidth configuration requirement, the application developer may have to specify a custom memory
+ * pool configuration here. See @ref ble_common_opt_conn_bw_t for bandwidth configuration of individual connections.
+ * Please refer to the SoftDevice Specification for more information on bandwidth configuration.
+ */
+typedef struct
+{
+  uint16_t                  vs_uuid_count;     /**< Maximum number of 128-bit, Vendor Specific UUID bases to allocate. */
+  ble_conn_bw_counts_t      *p_conn_bw_counts; /**< Bandwidth configuration parameters or NULL for defaults. */
+} ble_common_enable_params_t;
+
+/**
+ * @brief BLE Initialization parameters.
+ */
+typedef struct
+{
+  ble_common_enable_params_t        common_enable_params;  /**< Common init parameters @ref ble_common_enable_params_t. */
+  ble_gap_enable_params_t           gap_enable_params;   /**< GAP init parameters @ref ble_gap_enable_params_t. */
+  ble_gatts_enable_params_t         gatts_enable_params; /**< GATTS init parameters @ref ble_gatts_enable_params_t. */
+} ble_enable_params_t;
+
+/** @} */
+
+/** @addtogroup BLE_COMMON_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enable the BLE stack
+ *
+ * @param[in, out] p_ble_enable_params Pointer to ble_enable_params_t
+ * @param[in, out] p_app_ram_base      Pointer to a variable containing the start address of the application RAM region
+ * (APP_RAM_BASE). On return, this will contain the minimum start address of the application RAM region required by the
+ * SoftDevice for this configuration. Calling @ref sd_ble_enable() with *p_app_ram_base set to 0 can be used during
+ * development to find out how much memory a specific configuration will need.
+ *
+ * @note The memory requirement for a specific configuration will not increase between SoftDevices with the same major
+ * version number.
+ *
+ * @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located between 0x20000000 and
+ *       APP_RAM_BASE-1 and the application's RAM region is located between APP_RAM_BASE and the start of the call stack.
+ *
+ * @details This call initializes the BLE stack, no other BLE related function can be called before this one.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_COMMON_ENABLE}
+ * @endmscs
+ *
+ * @retval ::NRF_SUCCESS              The BLE stack has been initialized successfully.
+ * @retval ::NRF_ERROR_INVALID_STATE  The BLE stack had already been initialized and cannot be reinitialized.
+ * @retval ::NRF_ERROR_INVALID_ADDR   Invalid or not sufficiently aligned pointer supplied.
+ * @retval ::NRF_ERROR_INVALID_LENGTH The specified Attribute Table size is either too small or not a multiple of 4.
+ *                                    The minimum acceptable size is defined by @ref BLE_GATTS_ATTR_TAB_SIZE_MIN.
+ * @retval ::NRF_ERROR_INVALID_PARAM  Incorrectly configured VS UUID count or connection count parameters.
+ * @retval ::NRF_ERROR_NO_MEM         The amount of memory assigned to the SoftDevice by *p_app_ram_base is not
+ *                                    large enough to fit this configuration's memory requirement. Check *p_app_ram_base
+ *                                    and set the start address of the application RAM region accordingly.
+ * @retval ::NRF_ERROR_CONN_COUNT     The requested number of connections exceeds the maximum supported by the SoftDevice.
+ *                                    Please refer to the SoftDevice Specification for more information on role configuration.
+ */
+SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(ble_enable_params_t * p_ble_enable_params, uint32_t * p_app_ram_base));
+
+/**@brief Get an event from the pending events queue.
+ *
+ * @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length.
+ *                    This buffer <b>must be 4-byte aligned in memory</b>.
+ * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
+ *
+ * @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that
+ * an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt.
+ * The application is free to choose whether to call this function from thread mode (main context) or directly from the
+ * Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher
+ * priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned)
+ * every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so
+ * could potentially leave events in the internal queue without the application being aware of this fact. Sizing the
+ * p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to
+ * be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event,
+ * @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size.
+ * Please note that because of the variable length nature of some events, sizeof(ble_evt_t) will not always be large
+ * enough to fit certain events, and so it is the application's responsibility to provide an amount of memory large
+ * enough so that the relevant event is copied in full. The application may "peek" the event length by providing p_dest
+ * as a NULL pointer and inspecting the value of *p_len upon return:
+ *
+ *     \code
+ *     uint16_t len;
+ *     errcode = sd_ble_evt_get(NULL, &len);
+ *     \endcode
+ *
+ * @note The pointer supplied must be aligned to the extend defined by @ref BLE_EVTS_PTR_ALIGNMENT
+ *
+ * @mscs
+ * @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC}
+ * @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC}
+ * @endmscs
+ *
+ * @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
+ * @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled.
+ * @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
+ */
+SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t *p_dest, uint16_t *p_len));
+
+
+/**@brief Get the total number of available guaranteed application transmission packets for a particular connection.
+ *
+ * @details This call allows the application to obtain the total number of guaranteed application transmission packets
+ * available for a connection. Please note that this does not return the number of free packets, but rather the total
+ * amount of them for that particular connection. The application has two options to handle transmitting application packets:
+ * - Use a simple arithmetic calculation: after connection creation time the application should use this function to
+ * find out the total amount of guaranteed packets available to it and store it in a variable.
+ * Every time a packet is successfully queued for a transmission on this connection using any of the exposed functions in
+ * this  BLE API, the application should decrement that variable. Conversely, whenever a @ref BLE_EVT_TX_COMPLETE event
+ * with the conn_handle matching the particular connection is received by the application, it should retrieve the count
+ * field in such event and add that number to the same variable storing the number of available guaranteed packets. This
+ * mechanism allows the application to be aware at any time of the number of guaranteed application packets available for
+ * each of the active connections, and therefore it can know with certainty whether it is possible to send more data or
+ * it has to wait for a @ref BLE_EVT_TX_COMPLETE event before it proceeds.
+ * The application can still pursue transmissions when the number of guaranteed application packets available is smaller
+ * than or equal to zero, but successful queuing of the tranmsission is not guaranteed.
+ * - Choose to simply not keep track of available packets at all, and instead handle the @ref BLE_ERROR_NO_TX_PACKETS error
+ * by queueing the packet to be transmitted and try again as soon as a @ref BLE_EVT_TX_COMPLETE event arrives.
+ *
+ * The API functions that <b>may</b> consume an application packet depending on the parameters supplied to them can be found below:
+ * - @ref sd_ble_gattc_write (write without response only)
+ * - @ref sd_ble_gatts_hvx (notifications only)
+ * - @ref sd_ble_l2cap_tx (all packets)
+ *
+ * @param[in]  conn_handle Connection handle.
+ * @param[out] p_count Pointer to a uint8_t which will contain the number of application transmission packets upon
+ *                     successful return.
+ * @mscs
+ * @mmsc{@ref BLE_COMMON_APP_BUFF_MSC}
+ * @endmscs
+ *
+ * @retval ::NRF_SUCCESS Number of application transmission packets retrieved successfully.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_TX_PACKET_COUNT_GET, uint32_t, sd_ble_tx_packet_count_get(uint16_t conn_handle, uint8_t *p_count));
+
+
+/**@brief Add a Vendor Specific UUID.
+ *
+ * @details This call enables the application to add a vendor specific UUID to the BLE stack's table, for later use
+ * all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t format
+ * when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code paths.
+ * The way that this is accomplished is by extending the grouping mechanism that the Bluetooth SIG standard base
+ * UUID uses for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to
+ * @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the uuid field
+ * in the same structure contains the 2 bytes at indices 12 and 13. The number of possible 128-bit UUIDs available to
+ * the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
+ * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
+ *
+ * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
+ * the 16-bit uuid field in @ref ble_uuid_t.
+ *
+ * @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in
+ * p_uuid_type along with an NRF_SUCCESS error code.
+ *
+ * @param[in]  p_vs_uuid    Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding
+ *                          bytes 12 and 13.
+ * @param[out] p_uuid_type  Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
+ *
+ * @retval ::NRF_SUCCESS Successfully added the Vendor Specific UUID.
+ * @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
+ * @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
+ */
+SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_vs_uuid, uint8_t *p_uuid_type));
+
+
+/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
+ *
+ * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
+ * to the corresponding ones in each entry of the table of vendor specific UUIDs populated with @ref sd_ble_uuid_vs_add
+ * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
+ * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
+ *
+ * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
+ *
+ * @param[in]   uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
+ * @param[in]   p_uuid_le   Pointer pointing to little endian raw UUID bytes.
+ * @param[out]  p_uuid      Pointer to a @ref ble_uuid_t structure to be filled in.
+ *
+ * @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length.
+ * @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
+ */
+SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const *p_uuid_le, ble_uuid_t *p_uuid));
+
+
+/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
+ *
+ * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed.
+ *
+ * @param[in]   p_uuid        Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
+ * @param[out]  p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
+ * @param[out]  p_uuid_le     Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
+ *
+ * @retval ::NRF_SUCCESS Successfully encoded into the buffer.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type.
+ */
+SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const *p_uuid, uint8_t *p_uuid_le_len, uint8_t *p_uuid_le));
+
+
+/**@brief Get Version Information.
+ *
+ * @details This call allows the application to get the BLE stack version information.
+ *
+ * @param[out] p_version Pointer to a ble_version_t structure to be filled in.
+ *
+ * @retval ::NRF_SUCCESS  Version information stored successfully.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure).
+ */
+SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t *p_version));
+
+
+/**@brief Provide a user memory block.
+ *
+ * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in,out] p_block Pointer to a user memory block structure.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_PEER_CANCEL_MSC}
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC}
+ * @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}
+ * @endmscs
+ *
+ * @retval ::NRF_SUCCESS Successfully queued a response to the peer.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no execute write request pending.
+ * @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time.
+ */
+SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t const *p_block));
+
+/**@brief Set a BLE option.
+ *
+ * @details This call allows the application to set the value of an option.
+ *
+ * @mscs
+ * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC}
+ * @mmsc{@ref BLE_COMMON_CONF_BW}
+ * @endmscs
+ *
+ * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
+ * @param[in] p_opt Pointer to a ble_opt_t structure containing the option value.
+ *
+ * @retval ::NRF_SUCCESS  Option set successfully.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time.
+ * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
+ */
+SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt));
+
+
+/**@brief Get a BLE option.
+ *
+ * @details This call allows the application to retrieve the value of an option.
+ *
+ * @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
+ * @param[out] p_opt Pointer to a ble_opt_t structure to be filled in.
+ *
+ * @retval ::NRF_SUCCESS  Option retrieved successfully.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time.
+ * @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
+ * @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported.
+ *
+ */
+SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt));
+
+/** @} */
+#ifdef __cplusplus
+}
+#endif
+#endif /* NRF_BLE_H__ */
+
+/**
+  @}
+  @}
+*/