The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_SAMR21G18A/TOOLCHAIN_ARM_MICRO/gclk.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 111:4336505e4b1c
diff -r e95d10626187 -r 3a7713b1edbc TARGET_SAMR21G18A/TOOLCHAIN_ARM_MICRO/gclk.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_SAMR21G18A/TOOLCHAIN_ARM_MICRO/gclk.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,307 @@ +/** + * \file + * + * \brief SAM Generic Clock Driver + * + * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ +/* + * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> + */ +#ifndef SYSTEM_CLOCK_GCLK_H_INCLUDED +#define SYSTEM_CLOCK_GCLK_H_INCLUDED + +/** + * \addtogroup asfdoc_sam0_system_clock_group + * + * @{ + */ + +#include <compiler.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief List of available GCLK generators. + * + * List of Available GCLK generators. This enum is used in the peripheral + * device drivers to select the GCLK generator to be used for its operation. + * + * The number of GCLK generators available is device dependent. + */ +enum gclk_generator { + /** GCLK generator channel 0 */ + GCLK_GENERATOR_0, +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 0) + /** GCLK generator channel 1 */ + GCLK_GENERATOR_1, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 1) + /** GCLK generator channel 2 */ + GCLK_GENERATOR_2, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 2) + /** GCLK generator channel 3 */ + GCLK_GENERATOR_3, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 3) + /** GCLK generator channel 4 */ + GCLK_GENERATOR_4, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 4) + /** GCLK generator channel 5 */ + GCLK_GENERATOR_5, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 5) + /** GCLK generator channel 6 */ + GCLK_GENERATOR_6, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 6) + /** GCLK generator channel 7 */ + GCLK_GENERATOR_7, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 7) + /** GCLK generator channel 8 */ + GCLK_GENERATOR_8, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 8) + /** GCLK generator channel 9 */ + GCLK_GENERATOR_9, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 9) + /** GCLK generator channel 10 */ + GCLK_GENERATOR_10, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 10) + /** GCLK generator channel 11 */ + GCLK_GENERATOR_11, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 11) + /** GCLK generator channel 12 */ + GCLK_GENERATOR_12, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 12) + /** GCLK generator channel 13 */ + GCLK_GENERATOR_13, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 13) + /** GCLK generator channel 14 */ + GCLK_GENERATOR_14, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 14) + /** GCLK generator channel 15 */ + GCLK_GENERATOR_15, +#endif +#if defined(__DOXYGEN__) || (GCLK_GEN_NUM_MSB > 15) + /** GCLK generator channel 16 */ + GCLK_GENERATOR_16, +#endif +}; + +/** + * \brief Generic Clock Generator configuration structure. + * + * Configuration structure for a Generic Clock Generator channel. This + * structure should be initialized by the + * \ref system_gclk_gen_get_config_defaults() function before being modified by + * the user application. + */ +struct system_gclk_gen_config { + /** Source clock input channel index, see the \ref system_clock_source */ + uint8_t source_clock; + /** If \c true, the generator output level is high when disabled */ + bool high_when_disabled; + /** Integer division factor of the clock output compared to the input */ + uint32_t division_factor; + /** If \c true, the clock is kept enabled during device standby mode */ + bool run_in_standby; + /** If \c true, enables GCLK generator clock output to a GPIO pin */ + bool output_enable; +}; + +/** + * \brief Generic Clock configuration structure. + * + * Configuration structure for a Generic Clock channel. This structure + * should be initialized by the \ref system_gclk_chan_get_config_defaults() + * function before being modified by the user application. + */ +struct system_gclk_chan_config { + /** Generic Clock Generator source channel */ + enum gclk_generator source_generator; +}; + +/** \name Generic Clock Management + * @{ + */ +void system_gclk_init(void); + +/** @} */ + + +/** + * \name Generic Clock Management (Generators) + * @{ + */ + +/** + * \brief Initializes a Generic Clock Generator configuration structure to defaults. + * + * Initializes a given Generic Clock Generator configuration structure to + * a set of known default values. This function should be called on all + * new instances of these configuration structures before being modified + * by the user application. + * + * The default configuration is: + * \li Clock is generated undivided from the source frequency + * \li Clock generator output is low when the generator is disabled + * \li The input clock is sourced from input clock channel 0 + * \li Clock will be disabled during sleep + * \li The clock output will not be routed to a physical GPIO pin + * + * \param[out] config Configuration structure to initialize to default values + */ +static inline void system_gclk_gen_get_config_defaults( + struct system_gclk_gen_config *const config) +{ + /* Sanity check arguments */ + Assert(config); + + /* Default configuration values */ + config->division_factor = 1; + config->high_when_disabled = false; +#if SAML21 + config->source_clock = GCLK_SOURCE_OSC16M; +#elif (SAMC20) || (SAMC21) + config->source_clock = GCLK_SOURCE_OSC48M; +#else + config->source_clock = GCLK_SOURCE_OSC8M; +#endif + config->run_in_standby = false; + config->output_enable = false; +} + +void system_gclk_gen_set_config( + const uint8_t generator, + struct system_gclk_gen_config *const config); + +void system_gclk_gen_enable( + const uint8_t generator); + +void system_gclk_gen_disable( + const uint8_t generator); + +bool system_gclk_gen_is_enabled( + const uint8_t generator); + +/** @} */ + + +/** + * \name Generic Clock Management (Channels) + * @{ + */ + +/** + * \brief Initializes a Generic Clock configuration structure to defaults. + * + * Initializes a given Generic Clock configuration structure to a set of + * known default values. This function should be called on all new + * instances of these configuration structures before being modified by the + * user application. + * + * The default configuration is as follows: + * \li Clock is sourced from the Generic Clock Generator channel 0 + * \li Clock configuration will not be write-locked when set + * + * \param[out] config Configuration structure to initialize to default values + */ +static inline void system_gclk_chan_get_config_defaults( + struct system_gclk_chan_config *const config) +{ + /* Sanity check arguments */ + Assert(config); + + /* Default configuration values */ + config->source_generator = GCLK_GENERATOR_0; +} + +void system_gclk_chan_set_config( + const uint8_t channel, + struct system_gclk_chan_config *const config); + +void system_gclk_chan_enable( + const uint8_t channel); + +void system_gclk_chan_disable( + const uint8_t channel); + +bool system_gclk_chan_is_enabled( + const uint8_t channel); + +void system_gclk_chan_lock( + const uint8_t channel); + +bool system_gclk_chan_is_locked( + const uint8_t channel); + +/** @} */ + + +/** + * \name Generic Clock Frequency Retrieval + * @{ + */ + +uint32_t system_gclk_gen_get_hz( + const uint8_t generator); + +uint32_t system_gclk_chan_get_hz( + const uint8_t channel); + +/** @} */ + +#ifdef __cplusplus +} +#endif + +/** @} */ + +#endif