Diff: TARGET_SAMD21J18A/TOOLCHAIN_ARM_MICRO/objects.h

Revision:

171:3a7713b1edbc

Parent:

111:4336505e4b1c

diff -r e95d10626187 -r 3a7713b1edbc TARGET_SAMD21J18A/TOOLCHAIN_ARM_MICRO/objects.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21J18A/TOOLCHAIN_ARM_MICRO/objects.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,132 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "gpio_object.h"
+#include "tc.h"
+#include "tcc.h"
+#include "adc.h"
+#include "extint.h"
+#include "i2c_master.h"
+#include "i2c_slave.h"
+#include "dma_api.h"
+
+#if DEVICE_ANALOGOUT
+#include "dac.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+    uint8_t irqmask;
+    uint32_t port;
+    uint32_t pin;
+    uint32_t ch;
+    struct extint_chan_conf config_extint_chan;
+};
+
+struct port_s {
+    __IO uint32_t *OUTCLR;
+    __IO uint32_t *OUTSET;
+    __I uint32_t *IN;
+    __I uint32_t *OUT;
+
+    PortName port;
+    uint32_t mask;
+    uint8_t powersave;
+    uint8_t mode;
+    uint8_t direction;
+};
+
+struct serial_s {
+    Sercom *usart;
+    uint32_t index;
+    uint32_t parity;
+    uint32_t stopbits;
+    uint32_t character_size;
+    uint32_t mux_setting;
+    uint32_t baudrate;
+    PinName pins[4];
+#if DEVICE_SERIAL_ASYNCH
+    uint32_t events;
+#endif
+};
+
+struct analogin_s {
+    ADCName adc;
+    struct adc_config config_adc;
+};
+
+#if DEVICE_ANALOGOUT
+struct dac_s {
+    DACName dac;
+    PinName pin;
+    uint32_t channel;
+    struct dac_module dac_instance;
+};
+#endif
+
+struct pwmout_s {
+    struct tcc_module tcc;
+    PinName pin;
+    uint32_t period;
+    float duty_cycle;
+    double us_per_cycle;
+    enum gclk_generator clock_source;
+    enum tc_clock_prescaler clock_prescaler;
+};
+
+struct i2c_s {
+    struct i2c_master_module master;
+    struct i2c_slave_module slave;
+    uint8_t mode;
+    uint32_t baud_rate;
+    uint32_t baud_rate_high_speed;
+    uint8_t start_pending;
+    PinName pins[2];
+#if DEVICE_I2C_ASYNCH
+    uint32_t events;
+    uint32_t handler;
+    struct i2c_master_packet wr_packet;
+    struct i2c_master_packet rd_packet;
+#endif
+};
+
+struct spi_s {
+    Sercom *spi;
+    uint8_t mode;
+    PinName pins[4];
+#if DEVICE_SPI_ASYNCH
+    uint8_t status;
+    uint32_t mask;
+    uint32_t event;
+    void *tx_buffer;
+    void *rx_buffer;
+    uint8_t dma_usage;
+#endif
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif