The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_RO359B/TOOLCHAIN_ARM_STD/fsl_cmt.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 143:86740a56073b
diff -r e95d10626187 -r 3a7713b1edbc TARGET_RO359B/TOOLCHAIN_ARM_STD/fsl_cmt.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_RO359B/TOOLCHAIN_ARM_STD/fsl_cmt.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,401 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_CMT_H_ +#define _FSL_CMT_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup cmt + * @{ + */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief CMT driver version 2.0.1. */ +#define FSL_CMT_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) +/*@}*/ + +/*! + * @brief The modes of CMT. + */ +typedef enum _cmt_mode +{ + kCMT_DirectIROCtl = 0x00U, /*!< Carrier modulator is disabled and the IRO signal is directly in software control */ + kCMT_TimeMode = 0x01U, /*!< Carrier modulator is enabled in time mode. */ + kCMT_FSKMode = 0x05U, /*!< Carrier modulator is enabled in FSK mode. */ + kCMT_BasebandMode = 0x09U /*!< Carrier modulator is enabled in baseband mode. */ +} cmt_mode_t; + +/*! + * @brief The CMT clock divide primary prescaler. + * The primary clock divider is used to divider the bus clock to + * get the intermediate frequency to approximately equal to 8 MHZ. + * When the bus clock is 8 MHZ, set primary prescaler to "kCMT_PrimaryClkDiv1". + */ +typedef enum _cmt_primary_clkdiv +{ + kCMT_PrimaryClkDiv1 = 0U, /*!< The intermediate frequency is the bus clock divided by 1. */ + kCMT_PrimaryClkDiv2 = 1U, /*!< The intermediate frequency is the bus clock divided by 2. */ + kCMT_PrimaryClkDiv3 = 2U, /*!< The intermediate frequency is the bus clock divided by 3. */ + kCMT_PrimaryClkDiv4 = 3U, /*!< The intermediate frequency is the bus clock divided by 4. */ + kCMT_PrimaryClkDiv5 = 4U, /*!< The intermediate frequency is the bus clock divided by 5. */ + kCMT_PrimaryClkDiv6 = 5U, /*!< The intermediate frequency is the bus clock divided by 6. */ + kCMT_PrimaryClkDiv7 = 6U, /*!< The intermediate frequency is the bus clock divided by 7. */ + kCMT_PrimaryClkDiv8 = 7U, /*!< The intermediate frequency is the bus clock divided by 8. */ + kCMT_PrimaryClkDiv9 = 8U, /*!< The intermediate frequency is the bus clock divided by 9. */ + kCMT_PrimaryClkDiv10 = 9U, /*!< The intermediate frequency is the bus clock divided by 10. */ + kCMT_PrimaryClkDiv11 = 10U, /*!< The intermediate frequency is the bus clock divided by 11. */ + kCMT_PrimaryClkDiv12 = 11U, /*!< The intermediate frequency is the bus clock divided by 12. */ + kCMT_PrimaryClkDiv13 = 12U, /*!< The intermediate frequency is the bus clock divided by 13. */ + kCMT_PrimaryClkDiv14 = 13U, /*!< The intermediate frequency is the bus clock divided by 14. */ + kCMT_PrimaryClkDiv15 = 14U, /*!< The intermediate frequency is the bus clock divided by 15. */ + kCMT_PrimaryClkDiv16 = 15U /*!< The intermediate frequency is the bus clock divided by 16. */ +} cmt_primary_clkdiv_t; + +/*! + * @brief The CMT clock divide secondary prescaler. + * The second prescaler can be used to divide the 8 MHZ CMT clock + * by 1, 2, 4, or 8 according to the specification. + */ +typedef enum _cmt_second_clkdiv +{ + kCMT_SecondClkDiv1 = 0U, /*!< The CMT clock is the intermediate frequency frequency divided by 1. */ + kCMT_SecondClkDiv2 = 1U, /*!< The CMT clock is the intermediate frequency frequency divided by 2. */ + kCMT_SecondClkDiv4 = 2U, /*!< The CMT clock is the intermediate frequency frequency divided by 4. */ + kCMT_SecondClkDiv8 = 3U /*!< The CMT clock is the intermediate frequency frequency divided by 8. */ +} cmt_second_clkdiv_t; + +/*! + * @brief The CMT infrared output polarity. + */ +typedef enum _cmt_infrared_output_polarity +{ + kCMT_IROActiveLow = 0U, /*!< The CMT infrared output signal polarity is active-low. */ + kCMT_IROActiveHigh = 1U /*!< The CMT infrared output signal polarity is active-high. */ +} cmt_infrared_output_polarity_t; + +/*! + * @brief The CMT infrared output signal state control. + */ +typedef enum _cmt_infrared_output_state +{ + kCMT_IROCtlLow = 0U, /*!< The CMT Infrared output signal state is controlled to low. */ + kCMT_IROCtlHigh = 1U /*!< The CMT Infrared output signal state is controlled to high. */ +} cmt_infrared_output_state_t; + +/*! + * @brief CMT interrupt configuration structure, default settings all disabled. + * + * This structure contains the settings for all of the CMT interrupt configurations. + */ +enum _cmt_interrupt_enable +{ + kCMT_EndOfCycleInterruptEnable = CMT_MSC_EOCIE_MASK, /*!< CMT end of cycle interrupt. */ +}; + +/*! + * @brief CMT carrier generator and modulator configuration structure + * + */ +typedef struct _cmt_modulate_config +{ + uint8_t highCount1; /*!< The high-time for carrier generator first register. */ + uint8_t lowCount1; /*!< The low-time for carrier generator first register. */ + uint8_t highCount2; /*!< The high-time for carrier generator second register for FSK mode. */ + uint8_t lowCount2; /*!< The low-time for carrier generator second register for FSK mode. */ + uint16_t markCount; /*!< The mark time for the modulator gate. */ + uint16_t spaceCount; /*!< The space time for the modulator gate. */ +} cmt_modulate_config_t; + +/*! @brief CMT basic configuration structure. */ +typedef struct _cmt_config +{ + bool isInterruptEnabled; /*!< Timer interrupt 0-disable, 1-enable. */ + bool isIroEnabled; /*!< The IRO output 0-disabled, 1-enabled. */ + cmt_infrared_output_polarity_t iroPolarity; /*!< The IRO polarity. */ + cmt_second_clkdiv_t divider; /*!< The CMT clock divide prescaler. */ +} cmt_config_t; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Gets the CMT default configuration structure. This API + * gets the default configuration structure for the CMT_Init(). + * Use the initialized structure unchanged in CMT_Init() or modify + * fields of the structure before calling the CMT_Init(). + * + * @param config The CMT configuration structure pointer. + */ +void CMT_GetDefaultConfig(cmt_config_t *config); + +/*! + * @brief Initializes the CMT module. + * + * This function ungates the module clock and sets the CMT internal clock, + * interrupt, and infrared output signal for the CMT module. + * + * @param base CMT peripheral base address. + * @param config The CMT basic configuration structure. + * @param busClock_Hz The CMT module input clock - bus clock frequency. + */ +void CMT_Init(CMT_Type *base, const cmt_config_t *config, uint32_t busClock_Hz); + +/*! + * @brief Disables the CMT module and gate control. + * + * This function disables CMT modulator, interrupts, and gates the + * CMT clock control. CMT_Init must be called to use the CMT again. + * + * @param base CMT peripheral base address. + */ +void CMT_Deinit(CMT_Type *base); + +/*! @}*/ + +/*! + * @name Basic Control Operations + * @{ + */ + +/*! + * @brief Selects the mode for CMT. + * + * @param base CMT peripheral base address. + * @param mode The CMT feature mode enumeration. See "cmt_mode_t". + * @param modulateConfig The carrier generation and modulator configuration. + */ +void CMT_SetMode(CMT_Type *base, cmt_mode_t mode, cmt_modulate_config_t *modulateConfig); + +/*! + * @brief Gets the mode of the CMT module. + * + * @param base CMT peripheral base address. + * @return The CMT mode. + * kCMT_DirectIROCtl Carrier modulator is disabled; the IRO signal is directly in software control. + * kCMT_TimeMode Carrier modulator is enabled in time mode. + * kCMT_FSKMode Carrier modulator is enabled in FSK mode. + * kCMT_BasebandMode Carrier modulator is enabled in baseband mode. + */ +cmt_mode_t CMT_GetMode(CMT_Type *base); + +/*! + * @brief Gets the actual CMT clock frequency. + * + * @param base CMT peripheral base address. + * @param busClock_Hz CMT module input clock - bus clock frequency. + * @return The CMT clock frequency. + */ +uint32_t CMT_GetCMTFrequency(CMT_Type *base, uint32_t busClock_Hz); + +/*! + * @brief Sets the primary data set for the CMT carrier generator counter. + * + * This function sets the high-time and low-time of the primary data set for the + * CMT carrier generator counter to control the period and the duty cycle of the + * output carrier signal. + * If the CMT clock period is Tcmt, the period of the carrier generator signal equals + * (highCount + lowCount) * Tcmt. The duty cycle equals to highCount / (highCount + lowCount). + * + * @param base CMT peripheral base address. + * @param highCount The number of CMT clocks for carrier generator signal high time, + * integer in the range of 1 ~ 0xFF. + * @param lowCount The number of CMT clocks for carrier generator signal low time, + * integer in the range of 1 ~ 0xFF. + */ +static inline void CMT_SetCarrirGenerateCountOne(CMT_Type *base, uint32_t highCount, uint32_t lowCount) +{ + assert(highCount <= CMT_CGH1_PH_MASK); + assert(highCount); + assert(lowCount <= CMT_CGL1_PL_MASK); + assert(lowCount); + + base->CGH1 = highCount; + base->CGL1 = lowCount; +} + +/*! + * @brief Sets the secondary data set for the CMT carrier generator counter. + * + * This function is used for FSK mode setting the high-time and low-time of the secondary + * data set CMT carrier generator counter to control the period and the duty cycle + * of the output carrier signal. + * If the CMT clock period is Tcmt, the period of the carrier generator signal equals + * (highCount + lowCount) * Tcmt. The duty cycle equals highCount / (highCount + lowCount). + * + * @param base CMT peripheral base address. + * @param highCount The number of CMT clocks for carrier generator signal high time, + * integer in the range of 1 ~ 0xFF. + * @param lowCount The number of CMT clocks for carrier generator signal low time, + * integer in the range of 1 ~ 0xFF. + */ +static inline void CMT_SetCarrirGenerateCountTwo(CMT_Type *base, uint32_t highCount, uint32_t lowCount) +{ + assert(highCount <= CMT_CGH2_SH_MASK); + assert(highCount); + assert(lowCount <= CMT_CGL2_SL_MASK); + assert(lowCount); + + base->CGH2 = highCount; + base->CGL2 = lowCount; +} + +/*! + * @brief Sets the modulation mark and space time period for the CMT modulator. + * + * This function sets the mark time period of the CMT modulator counter + * to control the mark time of the output modulated signal from the carrier generator output signal. + * If the CMT clock frequency is Fcmt and the carrier out signal frequency is fcg: + * - In Time and Baseband mode: The mark period of the generated signal equals (markCount + 1) / (Fcmt/8). + * The space period of the generated signal equals spaceCount / (Fcmt/8). + * - In FSK mode: The mark period of the generated signal equals (markCount + 1)/fcg. + * The space period of the generated signal equals spaceCount / fcg. + * + * @param base Base address for current CMT instance. + * @param markCount The number of clock period for CMT modulator signal mark period, + * in the range of 0 ~ 0xFFFF. + * @param spaceCount The number of clock period for CMT modulator signal space period, + * in the range of the 0 ~ 0xFFFF. + */ +void CMT_SetModulateMarkSpace(CMT_Type *base, uint32_t markCount, uint32_t spaceCount); + +/*! + * @brief Enables or disables the extended space operation. + * + * This function is used to make the space period longer + * for time, baseband, and FSK modes. + * + * @param base CMT peripheral base address. + * @param enable True enable the extended space, false disable the extended space. + */ +static inline void CMT_EnableExtendedSpace(CMT_Type *base, bool enable) +{ + if (enable) + { + base->MSC |= CMT_MSC_EXSPC_MASK; + } + else + { + base->MSC &= ~CMT_MSC_EXSPC_MASK; + } +} + +/*! + * @brief Sets the IRO (infrared output) signal state. + * + * Changes the states of the IRO signal when the kCMT_DirectIROMode mode is set + * and the IRO signal is enabled. + * + * @param base CMT peripheral base address. + * @param state The control of the IRO signal. See "cmt_infrared_output_state_t" + */ +void CMT_SetIroState(CMT_Type *base, cmt_infrared_output_state_t state); + +/*! + * @brief Enables the CMT interrupt. + * + * This function enables the CMT interrupts according to the provided mask if enabled. + * The CMT only has the end of the cycle interrupt - an interrupt occurs at the end + * of the modulator cycle. This interrupt provides a means for the user + * to reload the new mark/space values into the CMT modulator data registers + * and verify the modulator mark and space. + * For example, to enable the end of cycle, do the following. + * @code + * CMT_EnableInterrupts(CMT, kCMT_EndOfCycleInterruptEnable); + * @endcode + * @param base CMT peripheral base address. + * @param mask The interrupts to enable. Logical OR of @ref _cmt_interrupt_enable. + */ +static inline void CMT_EnableInterrupts(CMT_Type *base, uint32_t mask) +{ + base->MSC |= mask; +} + +/*! + * @brief Disables the CMT interrupt. + * + * This function disables the CMT interrupts according to the provided maskIf enabled. + * The CMT only has the end of the cycle interrupt. + * For example, to disable the end of cycle, do the following. + * @code + * CMT_DisableInterrupts(CMT, kCMT_EndOfCycleInterruptEnable); + * @endcode + * + * @param base CMT peripheral base address. + * @param mask The interrupts to enable. Logical OR of @ref _cmt_interrupt_enable. + */ +static inline void CMT_DisableInterrupts(CMT_Type *base, uint32_t mask) +{ + base->MSC &= ~mask; +} + +/*! + * @brief Gets the end of the cycle status flag. + * + * The flag is set: + * - When the modulator is not currently active and carrier and modulator + * are set to start the initial CMT transmission. + * - At the end of each modulation cycle when the counter is reloaded and + * the carrier and modulator are enabled. + * @param base CMT peripheral base address. + * @return Current status of the end of cycle status flag + * @arg non-zero: End-of-cycle has occurred. + * @arg zero: End-of-cycle has not yet occurred since the flag last cleared. + */ +static inline uint32_t CMT_GetStatusFlags(CMT_Type *base) +{ + return base->MSC & CMT_MSC_EOCF_MASK; +} + +/*! @}*/ + +#if defined(__cplusplus) +} +#endif + +/*! @}*/ + +#endif /* _FSL_CMT_H_*/