The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l4xx_hal_dcmi.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 161:aa5281ff4a02
diff -r e95d10626187 -r 3a7713b1edbc TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l4xx_hal_dcmi.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_L432KC/TOOLCHAIN_IAR/stm32l4xx_hal_dcmi.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,657 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_dcmi.h + * @author MCD Application Team + * @brief Header file of DCMI HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_DCMI_H +#define __STM32L4xx_HAL_DCMI_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32L496xx) || defined(STM32L4A6xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup DCMI DCMI + * @brief DCMI HAL module driver + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup DCMI_Exported_Types DCMI Exported Types + * @{ + */ +/** + * @brief DCMI Embedded Synchronisation CODE Init structure definition + */ +typedef struct +{ + uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ + uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ + uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ + uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ +}DCMI_CodesInitTypeDef; + + +/** + * @brief DCMI Embedded Synchronisation CODE Init structure definition + */ +typedef struct +{ + uint8_t FrameStartUnmask; /*!< Specifies the frame start delimiter unmask. */ + uint8_t LineStartUnmask; /*!< Specifies the line start delimiter unmask. */ + uint8_t LineEndUnmask; /*!< Specifies the line end delimiter unmask. */ + uint8_t FrameEndUnmask; /*!< Specifies the frame end delimiter unmask. */ +}DCMI_SyncUnmaskTypeDef; + + +/** + * @brief DCMI Init structure definition + */ +typedef struct +{ + uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. + This parameter can be a value of @ref DCMI_Synchronization_Mode. */ + + uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. + This parameter can be a value of @ref DCMI_PIXCK_Polarity. */ + + uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. + This parameter can be a value of @ref DCMI_VSYNC_Polarity. */ + + uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. + This parameter can be a value of @ref DCMI_HSYNC_Polarity. */ + + uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. + This parameter can be a value of @ref DCMI_Capture_Rate. */ + + uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. + This parameter can be a value of @ref DCMI_Extended_Data_Mode. */ + + DCMI_CodesInitTypeDef SynchroCode; /*!< Specifies the frame start delimiter codes. */ + + uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode. + This parameter can be a value of @ref DCMI_JPEG_Mode. */ + + uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface. + This parameter can be a value of @ref DCMI_Byte_Select_Mode. */ + + uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd. + This parameter can be a value of @ref DCMI_Byte_Select_Start. */ + + uint32_t LineSelectMode; /*!< Specifies the data line to be captured by the interface. + This parameter can be a value of @ref DCMI_Line_Select_Mode. */ + + uint32_t LineSelectStart; /*!< Specifies if the data line to be captured by the interface is even or odd. + This parameter can be a value of @ref DCMI_Line_Select_Start. */ + +}DCMI_InitTypeDef; + + +/** + * @brief HAL DCMI State structures definition + */ +typedef enum +{ + HAL_DCMI_STATE_RESET = 0x00U, /*!< DCMI not yet initialized or disabled */ + HAL_DCMI_STATE_READY = 0x01U, /*!< DCMI initialized and ready for use */ + HAL_DCMI_STATE_BUSY = 0x02U, /*!< DCMI internal processing is ongoing */ + HAL_DCMI_STATE_TIMEOUT = 0x03U, /*!< DCMI timeout state */ + HAL_DCMI_STATE_ERROR = 0x04U, /*!< DCMI error state */ + HAL_DCMI_STATE_SUSPENDED = 0x05U /*!< DCMI suspend state */ +}HAL_DCMI_StateTypeDef; + + +/** + * @brief DCMI handle Structure definition + */ +typedef struct +{ + DCMI_TypeDef *Instance; /*!< DCMI Register base address */ + + DCMI_InitTypeDef Init; /*!< DCMI init parameters */ + + HAL_LockTypeDef Lock; /*!< DCMI locking object */ + + __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */ + + __IO uint32_t XferCount; /*!< DMA transfers counter */ + + __IO uint32_t XferSize; /*!< DMA transfer size */ + + uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ + + DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to DMA handler */ + + DMA_HandleTypeDef *DMAM2M_Handle; /*!< Pointer to DMA handler for memory to memory copy + (case picture size > maximum DMA transfer length) */ + + __IO uint32_t ErrorCode; /*!< DCMI Error code */ + + uint32_t pCircularBuffer; /*!< Pointer to intermediate copy buffer + (case picture size > maximum DMA transfer length) */ + + uint32_t HalfCopyLength; /*!< Intermediate copies length + (case picture size > maximum DMA transfer length) */ + +}DCMI_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup DCMI_Exported_Constants DCMI Exported Constants + * @{ + */ + +/** @defgroup DCMI_Error_Code DCMI Error Code + * @{ + */ +#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ +#define HAL_DCMI_ERROR_OVR ((uint32_t)0x00000001) /*!< Overrun error */ +#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */ +#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ +#define HAL_DCMI_ERROR_DMA ((uint32_t)0x00000040) /*!< DMA error */ +/** + * @} + */ + +/** @defgroup DCMI_Capture_Mode DCMI Capture Mode + * @{ + */ +#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously + into the destination memory through the DMA */ +#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of + frame and then transfers a single frame through the DMA */ +/** + * @} + */ + +/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode + * @{ + */ +#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop) + is synchronized with the HSYNC/VSYNC signals */ +#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with + synchronization codes embedded in the data flow */ + +/** + * @} + */ + +/** @defgroup DCMI_PIXCK_Polarity DCMI Pixel Clock Polarity + * @{ + */ +#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */ +#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */ + +/** + * @} + */ + +/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity + * @{ + */ +#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */ +#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */ + +/** + * @} + */ + +/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity + * @{ + */ +#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */ +#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */ + +/** + * @} + */ + +/** @defgroup DCMI_JPEG_Mode DCMI JPEG Mode + * @{ + */ +#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< JPEG mode disabled */ +#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< JPEG mode enabled */ + +/** + * @} + */ + +/** @defgroup DCMI_Capture_Rate DCMI Capture Rate + * @{ + */ +#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */ +#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */ +#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */ + +/** + * @} + */ + +/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode + * @{ + */ +#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */ +#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */ +#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */ +#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */ + +/** + * @} + */ + +/** @defgroup DCMI_Byte_Select_Mode DCMI Byte Select Mode + * @{ + */ +#define DCMI_BSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received data */ +#define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */ +#define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */ +#define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */ + +/** + * @} + */ + +/** @defgroup DCMI_Byte_Select_Start DCMI Byte Select Start + * @{ + */ +#define DCMI_OEBS_ODD ((uint32_t)0x00000000) /*!< Interface captures first data from the frame/line start, second one being dropped */ +#define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */ + +/** + * @} + */ + +/** @defgroup DCMI_Line_Select_Mode DCMI Line Select Mode + * @{ + */ +#define DCMI_LSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received lines */ +#define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */ + +/** + * @} + */ + +/** @defgroup DCMI_Line_Select_Start DCMI Line Select Start + * @{ + */ +#define DCMI_OELS_ODD ((uint32_t)0x00000000) /*!< Interface captures first line from the frame start, second one being dropped */ +#define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */ + +/** + * @} + */ + + +/** @defgroup DCMI_interrupt_sources DCMI Interrupt Sources + * @{ + */ +#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) /*!< Capture complete interrupt */ +#define DCMI_IT_OVR ((uint32_t)DCMI_IER_OVR_IE) /*!< Overrun interrupt */ +#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) /*!< Synchronization error interrupt */ +#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) /*!< VSYNC interrupt */ +#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) /*!< Line interrupt */ +/** + * @} + */ + +/** @defgroup DCMI_Flags DCMI Flags + * @{ + */ + +/** + * @brief DCMI SR register + */ +#define DCMI_FLAG_HSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines) */ +#define DCMI_FLAG_VSYNC ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */ +#define DCMI_FLAG_FNE ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE) /*!< FIFO not empty flag */ +/** + * @brief DCMI RIS register + */ +#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RIS_FRAME_RIS) /*!< Capture complete interrupt flag */ +#define DCMI_FLAG_OVRRI ((uint32_t)DCMI_RIS_OVR_RIS) /*!< Overrun interrupt flag */ +#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RIS_ERR_RIS) /*!< Synchronization error interrupt flag */ +#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RIS_VSYNC_RIS) /*!< VSYNC interrupt flag */ +#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RIS_LINE_RIS) /*!< Line interrupt flag */ +/** + * @brief DCMI MIS register + */ +#define DCMI_FLAG_FRAMEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS) /*!< DCMI Capture complete masked interrupt status */ +#define DCMI_FLAG_OVRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS ) /*!< DCMI Overrun masked interrupt status */ +#define DCMI_FLAG_ERRMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS ) /*!< DCMI Synchronization error masked interrupt status */ +#define DCMI_FLAG_VSYNCMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS) /*!< DCMI VSYNC masked interrupt status */ +#define DCMI_FLAG_LINEMI ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS ) /*!< DCMI Line masked interrupt status */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup DCMI_Exported_Macros DCMI Exported Macros + * @{ + */ + +/** @brief Reset DCMI handle state + * @param __HANDLE__: specifies the DCMI handle. + * @retval None + */ +#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET) + +/** + * @brief Enable the DCMI. + * @param __HANDLE__: DCMI handle + * @retval None + */ +#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE) + +/** + * @brief Disable the DCMI. + * @param __HANDLE__: DCMI handle + * @retval None + */ +#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE)) + +/* Interrupt & Flag management */ +/** + * @brief Get the DCMI pending flag. + * @param __HANDLE__: DCMI handle + * @param __FLAG__: Get the specified flag. + * This parameter can be one of the following values (no combination allowed) + * @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines) + * @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames) + * @arg DCMI_FLAG_FNE: FIFO empty flag + * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag + * @arg DCMI_FLAG_OVRRI: Overrun flag + * @arg DCMI_FLAG_ERRRI: Synchronization error flag + * @arg DCMI_FLAG_VSYNCRI: VSYNC flag + * @arg DCMI_FLAG_LINERI: Line flag + * @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status + * @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status + * @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status + * @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status + * @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status + * @retval The state of FLAG. + */ +#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\ +((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\ + (((__FLAG__) & DCMI_SR_INDEX) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__))) + +/** + * @brief Clear the DCMI pending flag. + * @param __HANDLE__: DCMI handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be any combination of the following values: + * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag + * @arg DCMI_FLAG_OVRRI: Overrun flag + * @arg DCMI_FLAG_ERRRI: Synchronization error flag + * @arg DCMI_FLAG_VSYNCRI: VSYNC flag + * @arg DCMI_FLAG_LINERI: Line flag + * @retval None + */ +#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** + * @brief Enable the specified DCMI interrupts. + * @param __HANDLE__: DCMI handle + * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt + * @arg DCMI_IT_OVR: Overrun interrupt + * @arg DCMI_IT_ERR: Synchronization error interrupt + * @arg DCMI_IT_VSYNC: VSYNC interrupt + * @arg DCMI_IT_LINE: Line interrupt + * @retval None + */ +#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) + +/** + * @brief Disable the specified DCMI interrupts. + * @param __HANDLE__: DCMI handle + * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. + * This parameter can be any combination of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt + * @arg DCMI_IT_OVR: Overrun interrupt + * @arg DCMI_IT_ERR: Synchronization error interrupt + * @arg DCMI_IT_VSYNC: VSYNC interrupt + * @arg DCMI_IT_LINE: Line interrupt + * @retval None + */ +#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) + +/** + * @brief Check whether or not the specified DCMI interrupt has occurred and that the interruption is enabled at the same time. + * @note A bit in MIS register is set if the corresponding enable bit in + * DCMI_IER is set and the corresponding bit in DCMI_RIS is set. + * @param __HANDLE__: DCMI handle + * @param __INTERRUPT__: specifies the DCMI interrupt flag and source to check. + * This parameter can be one of the following values: + * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask + * @arg DCMI_IT_OVR: Overrun interrupt mask + * @arg DCMI_IT_ERR: Synchronization error interrupt mask + * @arg DCMI_IT_VSYNC: VSYNC interrupt mask + * @arg DCMI_IT_LINE: Line interrupt mask + * @retval The state of INTERRUPT. + */ +#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MIS & (__INTERRUPT__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup DCMI_Exported_Functions + * @{ + */ + +/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions + * @{ + */ + +/* Initialization and de-initialization functions *****************************/ +HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi); +HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi); +void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi); +void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi); +/** + * @} + */ + +/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length); +HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi); +HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi); +HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi); +void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi); +void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi); +void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi); +void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi); +void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi); +/** + * @} + */ + +/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize); +HAL_StatusTypeDef HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi); +HAL_StatusTypeDef HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi); +HAL_StatusTypeDef HAL_DCMI_ConfigSyncUnmask(DCMI_HandleTypeDef *hdcmi, DCMI_SyncUnmaskTypeDef *SyncUnmask); +/** + * @} + */ + +/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +/* Peripheral State functions *************************************************/ +HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi); +uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @addtogroup DCMI_Private_Constants DCMI Private Constants + * @{ + */ + +/** @defgroup DCMI_Registers_Indices DCMI Registers Indices + * @{ + */ +#define DCMI_MIS_INDEX ((uint32_t)0x1000) /*!< DCMI MIS register index */ +#define DCMI_SR_INDEX ((uint32_t)0x2000) /*!< DCMI SR register index */ +/** + * @} + */ + +/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate + * @{ + */ +#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */ +/** + * @} + */ + +/** @defgroup DCMI_Window_Height DCMI Window Height + * @{ + */ +#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */ +/** + * @} + */ + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/** @defgroup DCMI_Private_Macros DCMI Private Macros + * @{ + */ +#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \ + ((MODE) == DCMI_MODE_SNAPSHOT)) + +#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \ + ((MODE) == DCMI_SYNCHRO_EMBEDDED)) + +#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \ + ((POLARITY) == DCMI_PCKPOLARITY_RISING)) + +#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \ + ((POLARITY) == DCMI_VSPOLARITY_HIGH)) + +#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \ + ((POLARITY) == DCMI_HSPOLARITY_HIGH)) + +#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \ + ((JPEG_MODE) == DCMI_JPEG_ENABLE)) + +#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \ + ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \ + ((RATE) == DCMI_CR_ALTERNATE_4_FRAME)) + +#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \ + ((DATA) == DCMI_EXTEND_DATA_10B) || \ + ((DATA) == DCMI_EXTEND_DATA_12B) || \ + ((DATA) == DCMI_EXTEND_DATA_14B)) + +#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE) + +#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT) + +#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \ + ((MODE) == DCMI_BSM_OTHER) || \ + ((MODE) == DCMI_BSM_ALTERNATE_4) || \ + ((MODE) == DCMI_BSM_ALTERNATE_2)) + +#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \ + ((POLARITY) == DCMI_OEBS_EVEN)) + +#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \ + ((MODE) == DCMI_LSM_ALTERNATE_2)) + +#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \ + ((POLARITY) == DCMI_OELS_EVEN)) + +#define IS_DCMI_INTERRUPTS(INTERRUPTS) ((INTERRUPTS) <= DCMI_IER_INT_IE) + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L496xx || STM32L4A6xx || */ + /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_DCMI_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/