Diff: TARGET_LPC824/TOOLCHAIN_ARM_MICRO/PinNames.h

Revision:

171:3a7713b1edbc

Parent:

156:ff21514d8981

diff -r e95d10626187 -r 3a7713b1edbc TARGET_LPC824/TOOLCHAIN_ARM_MICRO/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC824/TOOLCHAIN_ARM_MICRO/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PIN_SHIFT 8
+
+typedef enum {
+// LPC824 Pin Names (PIN[11:8] + IOCON offset[7:0])
+
+    P0_0  = ( 0 << PIN_SHIFT) | 0x44,
+    P0_1  = ( 1 << PIN_SHIFT) | 0x2C,
+    P0_2  = ( 2 << PIN_SHIFT) | 0x18,
+    P0_3  = ( 3 << PIN_SHIFT) | 0x14,
+    P0_4  = ( 4 << PIN_SHIFT) | 0x10,
+    P0_5  = ( 5 << PIN_SHIFT) | 0x0C,
+    P0_6  = ( 6 << PIN_SHIFT) | 0x40,
+    P0_7  = ( 7 << PIN_SHIFT) | 0x3C,
+    P0_8  = ( 8 << PIN_SHIFT) | 0x38,
+    P0_9  = ( 9 << PIN_SHIFT) | 0x34,
+    P0_10 = (10 << PIN_SHIFT) | 0x20,
+    P0_11 = (11 << PIN_SHIFT) | 0x1C,
+    P0_12 = (12 << PIN_SHIFT) | 0x08,
+    P0_13 = (13 << PIN_SHIFT) | 0x04,
+    P0_14 = (14 << PIN_SHIFT) | 0x48,
+    P0_15 = (15 << PIN_SHIFT) | 0x28,
+    P0_16 = (16 << PIN_SHIFT) | 0x24,
+    P0_17 = (17 << PIN_SHIFT) | 0x00,
+    P0_18 = (18 << PIN_SHIFT) | 0x78,
+    P0_19 = (19 << PIN_SHIFT) | 0x74,
+    P0_20 = (20 << PIN_SHIFT) | 0x70,
+    P0_21 = (21 << PIN_SHIFT) | 0x6C,
+    P0_22 = (22 << PIN_SHIFT) | 0x68,
+    P0_23 = (23 << PIN_SHIFT) | 0x64,
+    P0_24 = (24 << PIN_SHIFT) | 0x60,
+    P0_25 = (25 << PIN_SHIFT) | 0x5C,
+    P0_26 = (26 << PIN_SHIFT) | 0x58,
+    P0_27 = (27 << PIN_SHIFT) | 0x54,
+    P0_28 = (28 << PIN_SHIFT) | 0x50,
+    
+    D0 = P0_0,
+    D1 = P0_4,
+    D2 = P0_19,
+    D3 = P0_12, // LED_RED
+    D4 = P0_18,
+    D5 = P0_28,
+    D6 = P0_16, // LED_GREEN
+    D7 = P0_17,
+    D8 = P0_13,
+    D9 = P0_27, // LED_BLUE
+    D10 = P0_15,
+    D11 = P0_26,
+    D12 = P0_25,
+    D13 = P0_24,
+    D14 = P0_11,
+    D15 = P0_10,
+    
+    A0 = P0_6,
+    A1 = P0_14,
+    A2 = P0_23,
+    A3 = P0_22,
+    A4 = P0_21,
+    A5 = P0_20,
+    
+    // LPC824-MAX board
+    LED_RED = P0_12,
+    LED_GREEN = P0_16,
+    LED_BLUE = P0_27,
+    
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_BLUE,
+    
+    // Serial to USB pins
+    USBTX = P0_7,
+    USBRX = P0_18,
+    
+    // I2C pins
+    SCL = P0_10,
+    SDA = P0_11,
+    I2C_SCL = P0_10,
+    I2C_SDA = P0_11,
+    
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+
+typedef struct {
+    unsigned char n;
+    unsigned char offset;
+} SWM_Map;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif