Diff: TARGET_K66F/TOOLCHAIN_IAR/MK66F18_features.h

Revision:

171:3a7713b1edbc

diff -r e95d10626187 -r 3a7713b1edbc TARGET_K66F/TOOLCHAIN_IAR/MK66F18_features.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K66F/TOOLCHAIN_IAR/MK66F18_features.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,1978 @@
+/*
+** ###################################################################
+**     Version:             rev. 2.9, 2015-06-08
+**     Build:               b170228
+**
+**     Abstract:
+**         Chip specific module features.
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2017 NXP
+**     Redistribution and use in source and binary forms, with or without modification,
+**     are permitted provided that the following conditions are met:
+**
+**     o Redistributions of source code must retain the above copyright notice, this list
+**       of conditions and the following disclaimer.
+**
+**     o Redistributions in binary form must reproduce the above copyright notice, this
+**       list of conditions and the following disclaimer in the documentation and/or
+**       other materials provided with the distribution.
+**
+**     o Neither the name of the copyright holder nor the names of its
+**       contributors may be used to endorse or promote products derived from this
+**       software without specific prior written permission.
+**
+**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+**     http:                 www.nxp.com
+**     mail:                 support@nxp.com
+**
+**     Revisions:
+**     - rev. 1.0 (2013-09-02)
+**         Initial version.
+**     - rev. 1.1 (2014-01-30)
+**         Added single maximum value generation and a constrain to varying feature values that only numbers can have maximum.
+**     - rev. 2.0 (2014-02-17)
+**         Register accessor macros added to the memory map.
+**         Symbols for Processor Expert memory map compatibility added to the memory map.
+**         Startup file for gcc has been updated according to CMSIS 3.2.
+**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
+**         Update according to reference manual rev. 2
+**     - rev. 2.1 (2014-04-16)
+**         Update of SystemInit() and SystemCoreClockUpdate() functions.
+**     - rev. 2.2 (2014-10-14)
+**         Interrupt INT_LPTimer renamed to INT_LPTMR0, interrupt INT_Watchdog renamed to INT_WDOG_EWM.
+**     - rev. 2.3 (2014-11-20)
+**         Update according to reverence manual K65P169M180SF5RMV2_NDA, Rev. 0 Draft A, October 2014.
+**         Update of SystemInit() to use 16MHz external crystal.
+**     - rev. 2.4 (2015-01-21)
+**         Added FSL_FEATURE_SOC_peripheral_COUNT with number of peripheral instances
+**     - rev. 2.5 (2015-02-19)
+**         Renamed interrupt vector LLW to LLWU.
+**     - rev. 2.6 (2015-05-19)
+**         FSL_FEATURE_SOC_CAU_COUNT remamed to FSL_FEATURE_SOC_MMCAU_COUNT.
+**         Added FSL_FEATURE_SOC_peripheral_COUNT for TRNG and HSADC.
+**         Added features for PDB and PORT.
+**     - rev. 2.7 (2015-05-25)
+**         Added FSL_FEATURE_FLASH_PFLASH_START_ADDRESS
+**     - rev. 2.8 (2015-05-27)
+**         Several USB features added.
+**     - rev. 2.9 (2015-06-08)
+**         FTM features BUS_CLOCK and FAST_CLOCK removed.
+**
+** ###################################################################
+*/
+
+#ifndef _MK66F18_FEATURES_H_
+#define _MK66F18_FEATURES_H_
+
+/* SOC module features */
+
+/* @brief ACMP availability on the SoC. */
+#define FSL_FEATURE_SOC_ACMP_COUNT (0)
+/* @brief ADC16 availability on the SoC. */
+#define FSL_FEATURE_SOC_ADC16_COUNT (2)
+/* @brief ADC12 availability on the SoC. */
+#define FSL_FEATURE_SOC_ADC12_COUNT (0)
+/* @brief AFE availability on the SoC. */
+#define FSL_FEATURE_SOC_AFE_COUNT (0)
+/* @brief AIPS availability on the SoC. */
+#define FSL_FEATURE_SOC_AIPS_COUNT (2)
+/* @brief AOI availability on the SoC. */
+#define FSL_FEATURE_SOC_AOI_COUNT (0)
+/* @brief AXBS availability on the SoC. */
+#define FSL_FEATURE_SOC_AXBS_COUNT (1)
+/* @brief ASMC availability on the SoC. */
+#define FSL_FEATURE_SOC_ASMC_COUNT (0)
+/* @brief CADC availability on the SoC. */
+#define FSL_FEATURE_SOC_CADC_COUNT (0)
+/* @brief FLEXCAN availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXCAN_COUNT (2)
+/* @brief MMCAU availability on the SoC. */
+#define FSL_FEATURE_SOC_MMCAU_COUNT (1)
+/* @brief CMP availability on the SoC. */
+#define FSL_FEATURE_SOC_CMP_COUNT (4)
+/* @brief CMT availability on the SoC. */
+#define FSL_FEATURE_SOC_CMT_COUNT (1)
+/* @brief CNC availability on the SoC. */
+#define FSL_FEATURE_SOC_CNC_COUNT (0)
+/* @brief CRC availability on the SoC. */
+#define FSL_FEATURE_SOC_CRC_COUNT (1)
+/* @brief DAC availability on the SoC. */
+#define FSL_FEATURE_SOC_DAC_COUNT (2)
+/* @brief DAC32 availability on the SoC. */
+#define FSL_FEATURE_SOC_DAC32_COUNT (0)
+/* @brief DCDC availability on the SoC. */
+#define FSL_FEATURE_SOC_DCDC_COUNT (0)
+/* @brief DDR availability on the SoC. */
+#define FSL_FEATURE_SOC_DDR_COUNT (0)
+/* @brief DMA availability on the SoC. */
+#define FSL_FEATURE_SOC_DMA_COUNT (0)
+/* @brief EDMA availability on the SoC. */
+#define FSL_FEATURE_SOC_EDMA_COUNT (1)
+/* @brief DMAMUX availability on the SoC. */
+#define FSL_FEATURE_SOC_DMAMUX_COUNT (1)
+/* @brief DRY availability on the SoC. */
+#define FSL_FEATURE_SOC_DRY_COUNT (0)
+/* @brief DSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_DSPI_COUNT (3)
+/* @brief EMVSIM availability on the SoC. */
+#define FSL_FEATURE_SOC_EMVSIM_COUNT (0)
+/* @brief ENC availability on the SoC. */
+#define FSL_FEATURE_SOC_ENC_COUNT (0)
+/* @brief ENET availability on the SoC. */
+#define FSL_FEATURE_SOC_ENET_COUNT (1)
+/* @brief EWM availability on the SoC. */
+#define FSL_FEATURE_SOC_EWM_COUNT (1)
+/* @brief FB availability on the SoC. */
+#define FSL_FEATURE_SOC_FB_COUNT (1)
+/* @brief FGPIO availability on the SoC. */
+#define FSL_FEATURE_SOC_FGPIO_COUNT (0)
+/* @brief FLEXIO availability on the SoC. */
+#define FSL_FEATURE_SOC_FLEXIO_COUNT (0)
+/* @brief FMC availability on the SoC. */
+#define FSL_FEATURE_SOC_FMC_COUNT (1)
+/* @brief FSKDT availability on the SoC. */
+#define FSL_FEATURE_SOC_FSKDT_COUNT (0)
+/* @brief FTFA availability on the SoC. */
+#define FSL_FEATURE_SOC_FTFA_COUNT (0)
+/* @brief FTFE availability on the SoC. */
+#define FSL_FEATURE_SOC_FTFE_COUNT (1)
+/* @brief FTFL availability on the SoC. */
+#define FSL_FEATURE_SOC_FTFL_COUNT (0)
+/* @brief FTM availability on the SoC. */
+#define FSL_FEATURE_SOC_FTM_COUNT (4)
+/* @brief FTMRA availability on the SoC. */
+#define FSL_FEATURE_SOC_FTMRA_COUNT (0)
+/* @brief FTMRE availability on the SoC. */
+#define FSL_FEATURE_SOC_FTMRE_COUNT (0)
+/* @brief FTMRH availability on the SoC. */
+#define FSL_FEATURE_SOC_FTMRH_COUNT (0)
+/* @brief GPIO availability on the SoC. */
+#define FSL_FEATURE_SOC_GPIO_COUNT (5)
+/* @brief HSADC availability on the SoC. */
+#define FSL_FEATURE_SOC_HSADC_COUNT (0)
+/* @brief I2C availability on the SoC. */
+#define FSL_FEATURE_SOC_I2C_COUNT (4)
+/* @brief I2S availability on the SoC. */
+#define FSL_FEATURE_SOC_I2S_COUNT (1)
+/* @brief ICS availability on the SoC. */
+#define FSL_FEATURE_SOC_ICS_COUNT (0)
+/* @brief INTMUX availability on the SoC. */
+#define FSL_FEATURE_SOC_INTMUX_COUNT (0)
+/* @brief IRQ availability on the SoC. */
+#define FSL_FEATURE_SOC_IRQ_COUNT (0)
+/* @brief KBI availability on the SoC. */
+#define FSL_FEATURE_SOC_KBI_COUNT (0)
+/* @brief SLCD availability on the SoC. */
+#define FSL_FEATURE_SOC_SLCD_COUNT (0)
+/* @brief LCDC availability on the SoC. */
+#define FSL_FEATURE_SOC_LCDC_COUNT (0)
+/* @brief LDO availability on the SoC. */
+#define FSL_FEATURE_SOC_LDO_COUNT (0)
+/* @brief LLWU availability on the SoC. */
+#define FSL_FEATURE_SOC_LLWU_COUNT (1)
+/* @brief LMEM availability on the SoC. */
+#define FSL_FEATURE_SOC_LMEM_COUNT (1)
+/* @brief LPI2C availability on the SoC. */
+#define FSL_FEATURE_SOC_LPI2C_COUNT (0)
+/* @brief LPIT availability on the SoC. */
+#define FSL_FEATURE_SOC_LPIT_COUNT (0)
+/* @brief LPSCI availability on the SoC. */
+#define FSL_FEATURE_SOC_LPSCI_COUNT (0)
+/* @brief LPSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_LPSPI_COUNT (0)
+/* @brief LPTMR availability on the SoC. */
+#define FSL_FEATURE_SOC_LPTMR_COUNT (1)
+/* @brief LPTPM availability on the SoC. */
+#define FSL_FEATURE_SOC_LPTPM_COUNT (0)
+/* @brief LPUART availability on the SoC. */
+#define FSL_FEATURE_SOC_LPUART_COUNT (1)
+/* @brief LTC availability on the SoC. */
+#define FSL_FEATURE_SOC_LTC_COUNT (0)
+/* @brief MC availability on the SoC. */
+#define FSL_FEATURE_SOC_MC_COUNT (0)
+/* @brief MCG availability on the SoC. */
+#define FSL_FEATURE_SOC_MCG_COUNT (1)
+/* @brief MCGLITE availability on the SoC. */
+#define FSL_FEATURE_SOC_MCGLITE_COUNT (0)
+/* @brief MCM availability on the SoC. */
+#define FSL_FEATURE_SOC_MCM_COUNT (1)
+/* @brief MMAU availability on the SoC. */
+#define FSL_FEATURE_SOC_MMAU_COUNT (0)
+/* @brief MMDVSQ availability on the SoC. */
+#define FSL_FEATURE_SOC_MMDVSQ_COUNT (0)
+/* @brief SYSMPU availability on the SoC. */
+#define FSL_FEATURE_SOC_SYSMPU_COUNT (1)
+/* @brief MSCAN availability on the SoC. */
+#define FSL_FEATURE_SOC_MSCAN_COUNT (0)
+/* @brief MSCM availability on the SoC. */
+#define FSL_FEATURE_SOC_MSCM_COUNT (0)
+/* @brief MTB availability on the SoC. */
+#define FSL_FEATURE_SOC_MTB_COUNT (0)
+/* @brief MTBDWT availability on the SoC. */
+#define FSL_FEATURE_SOC_MTBDWT_COUNT (0)
+/* @brief MU availability on the SoC. */
+#define FSL_FEATURE_SOC_MU_COUNT (0)
+/* @brief NFC availability on the SoC. */
+#define FSL_FEATURE_SOC_NFC_COUNT (0)
+/* @brief OPAMP availability on the SoC. */
+#define FSL_FEATURE_SOC_OPAMP_COUNT (0)
+/* @brief OSC availability on the SoC. */
+#define FSL_FEATURE_SOC_OSC_COUNT (1)
+/* @brief OSC32 availability on the SoC. */
+#define FSL_FEATURE_SOC_OSC32_COUNT (0)
+/* @brief OTFAD availability on the SoC. */
+#define FSL_FEATURE_SOC_OTFAD_COUNT (0)
+/* @brief PDB availability on the SoC. */
+#define FSL_FEATURE_SOC_PDB_COUNT (1)
+/* @brief PCC availability on the SoC. */
+#define FSL_FEATURE_SOC_PCC_COUNT (0)
+/* @brief PGA availability on the SoC. */
+#define FSL_FEATURE_SOC_PGA_COUNT (0)
+/* @brief PIT availability on the SoC. */
+#define FSL_FEATURE_SOC_PIT_COUNT (1)
+/* @brief PMC availability on the SoC. */
+#define FSL_FEATURE_SOC_PMC_COUNT (1)
+/* @brief PORT availability on the SoC. */
+#define FSL_FEATURE_SOC_PORT_COUNT (5)
+/* @brief PWM availability on the SoC. */
+#define FSL_FEATURE_SOC_PWM_COUNT (0)
+/* @brief PWT availability on the SoC. */
+#define FSL_FEATURE_SOC_PWT_COUNT (0)
+/* @brief QuadSPI availability on the SoC. */
+#define FSL_FEATURE_SOC_QuadSPI_COUNT (0)
+/* @brief RCM availability on the SoC. */
+#define FSL_FEATURE_SOC_RCM_COUNT (1)
+/* @brief RFSYS availability on the SoC. */
+#define FSL_FEATURE_SOC_RFSYS_COUNT (1)
+/* @brief RFVBAT availability on the SoC. */
+#define FSL_FEATURE_SOC_RFVBAT_COUNT (1)
+/* @brief RNG availability on the SoC. */
+#define FSL_FEATURE_SOC_RNG_COUNT (1)
+/* @brief RNGB availability on the SoC. */
+#define FSL_FEATURE_SOC_RNGB_COUNT (0)
+/* @brief ROM availability on the SoC. */
+#define FSL_FEATURE_SOC_ROM_COUNT (0)
+/* @brief RSIM availability on the SoC. */
+#define FSL_FEATURE_SOC_RSIM_COUNT (0)
+/* @brief RTC availability on the SoC. */
+#define FSL_FEATURE_SOC_RTC_COUNT (1)
+/* @brief SCG availability on the SoC. */
+#define FSL_FEATURE_SOC_SCG_COUNT (0)
+/* @brief SCI availability on the SoC. */
+#define FSL_FEATURE_SOC_SCI_COUNT (0)
+/* @brief SDHC availability on the SoC. */
+#define FSL_FEATURE_SOC_SDHC_COUNT (1)
+/* @brief SDRAM availability on the SoC. */
+#define FSL_FEATURE_SOC_SDRAM_COUNT (1)
+/* @brief SEMA42 availability on the SoC. */
+#define FSL_FEATURE_SOC_SEMA42_COUNT (0)
+/* @brief SIM availability on the SoC. */
+#define FSL_FEATURE_SOC_SIM_COUNT (1)
+/* @brief SMC availability on the SoC. */
+#define FSL_FEATURE_SOC_SMC_COUNT (1)
+/* @brief SPI availability on the SoC. */
+#define FSL_FEATURE_SOC_SPI_COUNT (0)
+/* @brief TMR availability on the SoC. */
+#define FSL_FEATURE_SOC_TMR_COUNT (0)
+/* @brief TPM availability on the SoC. */
+#define FSL_FEATURE_SOC_TPM_COUNT (2)
+/* @brief TRGMUX availability on the SoC. */
+#define FSL_FEATURE_SOC_TRGMUX_COUNT (0)
+/* @brief TRIAMP availability on the SoC. */
+#define FSL_FEATURE_SOC_TRIAMP_COUNT (0)
+/* @brief TRNG availability on the SoC. */
+#define FSL_FEATURE_SOC_TRNG_COUNT (0)
+/* @brief TSI availability on the SoC. */
+#define FSL_FEATURE_SOC_TSI_COUNT (1)
+/* @brief TSTMR availability on the SoC. */
+#define FSL_FEATURE_SOC_TSTMR_COUNT (0)
+/* @brief UART availability on the SoC. */
+#define FSL_FEATURE_SOC_UART_COUNT (5)
+/* @brief USB availability on the SoC. */
+#define FSL_FEATURE_SOC_USB_COUNT (1)
+/* @brief USBDCD availability on the SoC. */
+#define FSL_FEATURE_SOC_USBDCD_COUNT (1)
+/* @brief USBHS availability on the SoC. */
+#define FSL_FEATURE_SOC_USBHS_COUNT (1)
+/* @brief USBHSDCD availability on the SoC. */
+#define FSL_FEATURE_SOC_USBHSDCD_COUNT (1)
+/* @brief USBPHY availability on the SoC. */
+#define FSL_FEATURE_SOC_USBPHY_COUNT (1)
+/* @brief VREF availability on the SoC. */
+#define FSL_FEATURE_SOC_VREF_COUNT (1)
+/* @brief WDOG availability on the SoC. */
+#define FSL_FEATURE_SOC_WDOG_COUNT (1)
+/* @brief XBAR availability on the SoC. */
+#define FSL_FEATURE_SOC_XBAR_COUNT (0)
+/* @brief XBARA availability on the SoC. */
+#define FSL_FEATURE_SOC_XBARA_COUNT (0)
+/* @brief XBARB availability on the SoC. */
+#define FSL_FEATURE_SOC_XBARB_COUNT (0)
+/* @brief XCVR availability on the SoC. */
+#define FSL_FEATURE_SOC_XCVR_COUNT (0)
+/* @brief XRDC availability on the SoC. */
+#define FSL_FEATURE_SOC_XRDC_COUNT (0)
+/* @brief ZLL availability on the SoC. */
+#define FSL_FEATURE_SOC_ZLL_COUNT (0)
+
+/* ADC16 module features */
+
+/* @brief Has Programmable Gain Amplifier (PGA) in ADC (register PGA). */
+#define FSL_FEATURE_ADC16_HAS_PGA (0)
+/* @brief Has PGA chopping control in ADC (bit PGA[PGACHPb] or PGA[PGACHP]). */
+#define FSL_FEATURE_ADC16_HAS_PGA_CHOPPING (0)
+/* @brief Has PGA offset measurement mode in ADC (bit PGA[PGAOFSM]). */
+#define FSL_FEATURE_ADC16_HAS_PGA_OFFSET_MEASUREMENT (0)
+/* @brief Has DMA support (bit SC2[DMAEN] or SC4[DMAEN]). */
+#define FSL_FEATURE_ADC16_HAS_DMA (1)
+/* @brief Has differential mode (bitfield SC1x[DIFF]). */
+#define FSL_FEATURE_ADC16_HAS_DIFF_MODE (1)
+/* @brief Has FIFO (bit SC4[AFDEP]). */
+#define FSL_FEATURE_ADC16_HAS_FIFO (0)
+/* @brief FIFO size if available (bitfield SC4[AFDEP]). */
+#define FSL_FEATURE_ADC16_FIFO_SIZE (0)
+/* @brief Has channel set a/b multiplexor (bitfield CFG2[MUXSEL]). */
+#define FSL_FEATURE_ADC16_HAS_MUX_SELECT (1)
+/* @brief Has HW trigger masking (bitfield SC5[HTRGMASKE]. */
+#define FSL_FEATURE_ADC16_HAS_HW_TRIGGER_MASK (0)
+/* @brief Has calibration feature (bit SC3[CAL] and registers CLPx, CLMx). */
+#define FSL_FEATURE_ADC16_HAS_CALIBRATION (1)
+/* @brief Has HW averaging (bit SC3[AVGE]). */
+#define FSL_FEATURE_ADC16_HAS_HW_AVERAGE (1)
+/* @brief Has offset correction (register OFS). */
+#define FSL_FEATURE_ADC16_HAS_OFFSET_CORRECTION (1)
+/* @brief Maximum ADC resolution. */
+#define FSL_FEATURE_ADC16_MAX_RESOLUTION (16)
+/* @brief Number of SC1x and Rx register pairs (conversion control and result registers). */
+#define FSL_FEATURE_ADC16_CONVERSION_CONTROL_COUNT (2)
+
+/* FLEXCAN module features */
+
+/* @brief Message buffer size */
+#define FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(x) (16)
+/* @brief Has doze mode support (register bit field MCR[DOZE]). */
+#define FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT (0)
+/* @brief Has a glitch filter on the receive pin (register bit field MCR[WAKSRC]). */
+#define FSL_FEATURE_FLEXCAN_HAS_GLITCH_FILTER (1)
+/* @brief Has extended interrupt mask and flag register (register IMASK2, IFLAG2). */
+#define FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER (0)
+/* @brief Has extended bit timing register (register CBT). */
+#define FSL_FEATURE_FLEXCAN_HAS_EXTENDED_TIMING_REGISTER (0)
+/* @brief Has a receive FIFO DMA feature (register bit field MCR[DMA]). */
+#define FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA (0)
+/* @brief Has separate message buffer 0 interrupt flag (register bit field IFLAG1[BUF0I]). */
+#define FSL_FEATURE_FLEXCAN_HAS_SEPARATE_BUFFER_0_FLAG (1)
+/* @brief Has bitfield name BUF31TO0M. */
+#define FSL_FEATURE_FLEXCAN_HAS_BUF31TO0M (0)
+/* @brief Number of interrupt vectors. */
+#define FSL_FEATURE_FLEXCAN_INTERRUPT_COUNT (6)
+/* @brief Is affected by errata with ID 5641 (Module does not transmit a message that is enabled to be transmitted at a specific moment during the arbitration process). */
+#define FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641 (0)
+
+/* CMP module features */
+
+/* @brief Has Trigger mode in CMP (register bit field CR1[TRIGM]). */
+#define FSL_FEATURE_CMP_HAS_TRIGGER_MODE (1)
+/* @brief Has Window mode in CMP (register bit field CR1[WE]). */
+#define FSL_FEATURE_CMP_HAS_WINDOW_MODE (1)
+/* @brief Has External sample supported in CMP (register bit field CR1[SE]). */
+#define FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT (1)
+/* @brief Has DMA support in CMP (register bit field SCR[DMAEN]). */
+#define FSL_FEATURE_CMP_HAS_DMA (1)
+/* @brief Has Pass Through mode in CMP (register bit field MUXCR[PSTM]). */
+#define FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE (1)
+/* @brief Has DAC Test function in CMP (register DACTEST). */
+#define FSL_FEATURE_CMP_HAS_DAC_TEST (0)
+
+/* CRC module features */
+
+/* @brief Has data register with name CRC */
+#define FSL_FEATURE_CRC_HAS_CRC_REG (0)
+
+/* DAC module features */
+
+/* @brief Define the size of hardware buffer */
+#define FSL_FEATURE_DAC_BUFFER_SIZE (16)
+/* @brief Define whether the buffer supports watermark event detection or not. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_DETECTION (1)
+/* @brief Define whether the buffer supports watermark selection detection or not. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_SELECTION (1)
+/* @brief Define whether the buffer supports watermark event 1 word before buffer upper limit. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_1_WORD (1)
+/* @brief Define whether the buffer supports watermark event 2 words before buffer upper limit. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_2_WORDS (1)
+/* @brief Define whether the buffer supports watermark event 3 words before buffer upper limit. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_3_WORDS (1)
+/* @brief Define whether the buffer supports watermark event 4 words before buffer upper limit. */
+#define FSL_FEATURE_DAC_HAS_WATERMARK_4_WORDS (1)
+/* @brief Define whether FIFO buffer mode is available or not. */
+#define FSL_FEATURE_DAC_HAS_BUFFER_FIFO_MODE (0)
+/* @brief Define whether swing buffer mode is available or not.. */
+#define FSL_FEATURE_DAC_HAS_BUFFER_SWING_MODE (1)
+
+/* EDMA module features */
+
+/* @brief Number of DMA channels (related to number of registers TCD, DCHPRI, bit fields ERQ[ERQn], EEI[EEIn], INT[INTn], ERR[ERRn], HRS[HRSn] and bit field widths ES[ERRCHN], CEEI[CEEI], SEEI[SEEI], CERQ[CERQ], SERQ[SERQ], CDNE[CDNE], SSRT[SSRT], CERR[CERR], CINT[CINT], TCDn_CITER_ELINKYES[LINKCH], TCDn_CSR[MAJORLINKCH], TCDn_BITER_ELINKYES[LINKCH]). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_MODULE_CHANNEL (32)
+/* @brief Total number of DMA channels on all modules. */
+#define FSL_FEATURE_EDMA_DMAMUX_CHANNELS (FSL_FEATURE_SOC_EDMA_COUNT * 32)
+/* @brief Number of DMA channel groups (register bit fields CR[ERGA], CR[GRPnPRI], ES[GPE], DCHPRIn[GRPPRI]). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT (2)
+/* @brief Has DMA_Error interrupt vector. */
+#define FSL_FEATURE_EDMA_HAS_ERROR_IRQ (1)
+/* @brief Number of DMA channels with asynchronous request capability (register EARS). (Valid only for eDMA modules.) */
+#define FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT (32)
+
+/* DMAMUX module features */
+
+/* @brief Number of DMA channels (related to number of register CHCFGn). */
+#define FSL_FEATURE_DMAMUX_MODULE_CHANNEL (32)
+/* @brief Total number of DMA channels on all modules. */
+#define FSL_FEATURE_DMAMUX_DMAMUX_CHANNELS (FSL_FEATURE_SOC_DMAMUX_COUNT * 32)
+/* @brief Has the periodic trigger capability for the triggered DMA channel (register bit CHCFG0[TRIG]). */
+#define FSL_FEATURE_DMAMUX_HAS_TRIG (1)
+
+/* ENET module features */
+
+/* @brief Has buffer descriptor byte swapping (register bit field ECR[DBSWP]). */
+#define FSL_FEATURE_ENET_DMA_BIG_ENDIAN_ONLY (0)
+/* @brief Has precision time protocol (IEEE 1588) support (register bit field ECR[EN1588], registers ATCR, ATVR, ATOFF, ATPER, ATCOR, ATINC, ATSTMP). */
+#define FSL_FEATURE_ENET_SUPPORT_PTP (1)
+/* @brief Number of associated interrupt vectors. */
+#define FSL_FEATURE_ENET_INTERRUPT_COUNT (4)
+/* @brief Has threshold for the number of frames in the receive FIFO (register bit field RSEM[STAT_SECTION_EMPTY]). */
+#define FSL_FEATURE_ENET_HAS_RECEIVE_STATUS_THRESHOLD (1)
+
+/* EWM module features */
+
+/* @brief Has clock select (register CLKCTRL). */
+#define FSL_FEATURE_EWM_HAS_CLOCK_SELECT  (0)
+/* @brief Has clock prescaler (register CLKPRESCALER). */
+#define FSL_FEATURE_EWM_HAS_PRESCALER  (0)
+
+/* FLEXBUS module features */
+
+/* No feature definitions */
+
+/* FLASH module features */
+
+#if defined(CPU_MK66FN2M0VLQ18) || defined(CPU_MK66FN2M0VMD18)
+    /* @brief Is of type FTFA. */
+    #define FSL_FEATURE_FLASH_IS_FTFA (0)
+    /* @brief Is of type FTFE. */
+    #define FSL_FEATURE_FLASH_IS_FTFE (1)
+    /* @brief Is of type FTFL. */
+    #define FSL_FEATURE_FLASH_IS_FTFL (0)
+    /* @brief Has flags indicating the status of the FlexRAM (register bits FCNFG[EEERDY], FCNFG[RAMRDY] and FCNFG[PFLSH]). */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_RAM_FLAGS (1)
+    /* @brief Has program flash swapping status flag (register bit FCNFG[SWAP]). */
+    #define FSL_FEATURE_FLASH_HAS_PFLASH_SWAPPING_STATUS_FLAG (1)
+    /* @brief Has EEPROM region protection (register FEPROT). */
+    #define FSL_FEATURE_FLASH_HAS_EEROM_REGION_PROTECTION (1)
+    /* @brief Has data flash region protection (register FDPROT). */
+    #define FSL_FEATURE_FLASH_HAS_DATA_FLASH_REGION_PROTECTION (1)
+    /* @brief Has flash access control (registers XACCHn, SACCHn, where n is a number, FACSS and FACSN). */
+    #define FSL_FEATURE_FLASH_HAS_ACCESS_CONTROL (1)
+    /* @brief Has flash cache control in FMC module. */
+    #define FSL_FEATURE_FLASH_HAS_FMC_FLASH_CACHE_CONTROLS (1)
+    /* @brief Has flash cache control in MCM module. */
+    #define FSL_FEATURE_FLASH_HAS_MCM_FLASH_CACHE_CONTROLS (0)
+    /* @brief Has flash cache control in MSCM module. */
+    #define FSL_FEATURE_FLASH_HAS_MSCM_FLASH_CACHE_CONTROLS (0)
+    /* @brief Has prefetch speculation control in flash, such as kv5x. */
+    #define FSL_FEATURE_FLASH_PREFETCH_SPECULATION_CONTROL_IN_FLASH (0)
+    /* @brief P-Flash start address. */
+    #define FSL_FEATURE_FLASH_PFLASH_START_ADDRESS (0x00000000)
+    /* @brief P-Flash block count. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_COUNT (4)
+    /* @brief P-Flash block size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SIZE (524288)
+    /* @brief P-Flash sector size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SECTOR_SIZE (4096)
+    /* @brief P-Flash write unit size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_WRITE_UNIT_SIZE (8)
+    /* @brief P-Flash data path width. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_DATA_PATH_WIDTH (16)
+    /* @brief P-Flash block swap feature. */
+    #define FSL_FEATURE_FLASH_HAS_PFLASH_BLOCK_SWAP (1)
+    /* @brief P-Flash protection region count. */
+    #define FSL_FEATURE_FLASH_PFLASH_PROTECTION_REGION_COUNT (32)
+    /* @brief Has FlexNVM memory. */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_NVM (0)
+    /* @brief FlexNVM start address. (Valid only if FlexNVM is available.) */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_START_ADDRESS (0x00000000)
+    /* @brief FlexNVM block count. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_COUNT (0)
+    /* @brief FlexNVM block size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SIZE (0)
+    /* @brief FlexNVM sector size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SECTOR_SIZE (0)
+    /* @brief FlexNVM write unit size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_WRITE_UNIT_SIZE (0)
+    /* @brief FlexNVM data path width. */
+    #define FSL_FEATURE_FLASH_FLEX_BLOCK_DATA_PATH_WIDTH (0)
+    /* @brief Has FlexRAM memory. */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_RAM (1)
+    /* @brief FlexRAM start address. (Valid only if FlexRAM is available.) */
+    #define FSL_FEATURE_FLASH_FLEX_RAM_START_ADDRESS (0x14000000)
+    /* @brief FlexRAM size. */
+    #define FSL_FEATURE_FLASH_FLEX_RAM_SIZE (4096)
+    /* @brief Has 0x00 Read 1s Block command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_BLOCK_CMD (1)
+    /* @brief Has 0x01 Read 1s Section command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_SECTION_CMD (1)
+    /* @brief Has 0x02 Program Check command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_CHECK_CMD (1)
+    /* @brief Has 0x03 Read Resource command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_RESOURCE_CMD (1)
+    /* @brief Has 0x06 Program Longword command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_LONGWORD_CMD (0)
+    /* @brief Has 0x07 Program Phrase command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_PHRASE_CMD (1)
+    /* @brief Has 0x08 Erase Flash Block command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_BLOCK_CMD (1)
+    /* @brief Has 0x09 Erase Flash Sector command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_SECTOR_CMD (1)
+    /* @brief Has 0x0B Program Section command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_SECTION_CMD (1)
+    /* @brief Has 0x40 Read 1s All Blocks command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_BLOCKS_CMD (1)
+    /* @brief Has 0x41 Read Once command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_ONCE_CMD (1)
+    /* @brief Has 0x43 Program Once command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_ONCE_CMD (1)
+    /* @brief Has 0x44 Erase All Blocks command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_CMD (1)
+    /* @brief Has 0x45 Verify Backdoor Access Key command. */
+    #define FSL_FEATURE_FLASH_HAS_VERIFY_BACKDOOR_ACCESS_KEY_CMD (1)
+    /* @brief Has 0x46 Swap Control command. */
+    #define FSL_FEATURE_FLASH_HAS_SWAP_CONTROL_CMD (1)
+    /* @brief Has 0x49 Erase All Blocks Unsecure command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_UNSECURE_CMD (0)
+    /* @brief Has 0x4A Read 1s All Execute-only Segments command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0)
+    /* @brief Has 0x4B Erase All Execute-only Segments command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0)
+    /* @brief Has 0x80 Program Partition command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_PARTITION_CMD (0)
+    /* @brief Has 0x81 Set FlexRAM Function command. */
+    #define FSL_FEATURE_FLASH_HAS_SET_FLEXRAM_FUNCTION_CMD (0)
+    /* @brief P-Flash Erase/Read 1st all block command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Erase sector command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SECTOR_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Rrogram/Verify section command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SECTION_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Read resource command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_RESOURCE_CMD_ADDRESS_ALIGMENT (8)
+    /* @brief P-Flash Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_CHECK_CMD_ADDRESS_ALIGMENT (4)
+    /* @brief P-Flash Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SWAP_CONTROL_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief FlexNVM Erase/Read 1st all block command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_CMD_ADDRESS_ALIGMENT (0)
+    /* @brief FlexNVM Erase sector command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_SECTOR_CMD_ADDRESS_ALIGMENT (0)
+    /* @brief FlexNVM Rrogram/Verify section command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_SECTION_CMD_ADDRESS_ALIGMENT (0)
+    /* @brief FlexNVM Read resource command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_RESOURCE_CMD_ADDRESS_ALIGMENT (0)
+    /* @brief FlexNVM Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_CHECK_CMD_ADDRESS_ALIGMENT (0)
+    /* @brief FlexNVM partition code 0000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0000 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0001 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0010 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0011 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0100 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0101 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0110 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0111 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1000 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1001 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1010 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1011 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1100 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1101 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1110 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1111 (0xFFFFFFFF)
+    /* @brief Emulated eeprom size code 0000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0000 (0xFFFF)
+    /* @brief Emulated eeprom size code 0001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0001 (0xFFFF)
+    /* @brief Emulated eeprom size code 0010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0010 (0x1000)
+    /* @brief Emulated eeprom size code 0011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0011 (0x0800)
+    /* @brief Emulated eeprom size code 0100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0100 (0x0400)
+    /* @brief Emulated eeprom size code 0101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0101 (0x0200)
+    /* @brief Emulated eeprom size code 0110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0110 (0x0100)
+    /* @brief Emulated eeprom size code 0111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0111 (0x0080)
+    /* @brief Emulated eeprom size code 1000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1000 (0x0040)
+    /* @brief Emulated eeprom size code 1001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1001 (0x0020)
+    /* @brief Emulated eeprom size code 1010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1010 (0xFFFF)
+    /* @brief Emulated eeprom size code 1011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1011 (0xFFFF)
+    /* @brief Emulated eeprom size code 1100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1100 (0xFFFF)
+    /* @brief Emulated eeprom size code 1101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1101 (0xFFFF)
+    /* @brief Emulated eeprom size code 1110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1110 (0xFFFF)
+    /* @brief Emulated eeprom size code 1111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1111 (0x0000)
+#elif defined(CPU_MK66FX1M0VLQ18) || defined(CPU_MK66FX1M0VMD18)
+    /* @brief Is of type FTFA. */
+    #define FSL_FEATURE_FLASH_IS_FTFA (0)
+    /* @brief Is of type FTFE. */
+    #define FSL_FEATURE_FLASH_IS_FTFE (1)
+    /* @brief Is of type FTFL. */
+    #define FSL_FEATURE_FLASH_IS_FTFL (0)
+    /* @brief Has flags indicating the status of the FlexRAM (register bits FCNFG[EEERDY], FCNFG[RAMRDY] and FCNFG[PFLSH]). */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_RAM_FLAGS (1)
+    /* @brief Has program flash swapping status flag (register bit FCNFG[SWAP]). */
+    #define FSL_FEATURE_FLASH_HAS_PFLASH_SWAPPING_STATUS_FLAG (1)
+    /* @brief Has EEPROM region protection (register FEPROT). */
+    #define FSL_FEATURE_FLASH_HAS_EEROM_REGION_PROTECTION (1)
+    /* @brief Has data flash region protection (register FDPROT). */
+    #define FSL_FEATURE_FLASH_HAS_DATA_FLASH_REGION_PROTECTION (1)
+    /* @brief Has flash access control (registers XACCHn, SACCHn, where n is a number, FACSS and FACSN). */
+    #define FSL_FEATURE_FLASH_HAS_ACCESS_CONTROL (1)
+    /* @brief Has flash cache control in FMC module. */
+    #define FSL_FEATURE_FLASH_HAS_FMC_FLASH_CACHE_CONTROLS (1)
+    /* @brief Has flash cache control in MCM module. */
+    #define FSL_FEATURE_FLASH_HAS_MCM_FLASH_CACHE_CONTROLS (0)
+    /* @brief Has flash cache control in MSCM module. */
+    #define FSL_FEATURE_FLASH_HAS_MSCM_FLASH_CACHE_CONTROLS (0)
+    /* @brief Has prefetch speculation control in flash, such as kv5x. */
+    #define FSL_FEATURE_FLASH_PREFETCH_SPECULATION_CONTROL_IN_FLASH (0)
+    /* @brief P-Flash start address. */
+    #define FSL_FEATURE_FLASH_PFLASH_START_ADDRESS (0x00000000)
+    /* @brief P-Flash block count. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_COUNT (2)
+    /* @brief P-Flash block size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SIZE (524288)
+    /* @brief P-Flash sector size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SECTOR_SIZE (4096)
+    /* @brief P-Flash write unit size. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_WRITE_UNIT_SIZE (8)
+    /* @brief P-Flash data path width. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_DATA_PATH_WIDTH (16)
+    /* @brief P-Flash block swap feature. */
+    #define FSL_FEATURE_FLASH_HAS_PFLASH_BLOCK_SWAP (1)
+    /* @brief P-Flash protection region count. */
+    #define FSL_FEATURE_FLASH_PFLASH_PROTECTION_REGION_COUNT (16)
+    /* @brief Has FlexNVM memory. */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_NVM (1)
+    /* @brief FlexNVM start address. (Valid only if FlexNVM is available.) */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_START_ADDRESS (0x10000000)
+    /* @brief FlexNVM block count. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_COUNT (1)
+    /* @brief FlexNVM block size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SIZE (262144)
+    /* @brief FlexNVM sector size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SECTOR_SIZE (4096)
+    /* @brief FlexNVM write unit size. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_WRITE_UNIT_SIZE (8)
+    /* @brief FlexNVM data path width. */
+    #define FSL_FEATURE_FLASH_FLEX_BLOCK_DATA_PATH_WIDTH (16)
+    /* @brief Has FlexRAM memory. */
+    #define FSL_FEATURE_FLASH_HAS_FLEX_RAM (1)
+    /* @brief FlexRAM start address. (Valid only if FlexRAM is available.) */
+    #define FSL_FEATURE_FLASH_FLEX_RAM_START_ADDRESS (0x14000000)
+    /* @brief FlexRAM size. */
+    #define FSL_FEATURE_FLASH_FLEX_RAM_SIZE (4096)
+    /* @brief Has 0x00 Read 1s Block command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_BLOCK_CMD (1)
+    /* @brief Has 0x01 Read 1s Section command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_SECTION_CMD (1)
+    /* @brief Has 0x02 Program Check command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_CHECK_CMD (1)
+    /* @brief Has 0x03 Read Resource command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_RESOURCE_CMD (1)
+    /* @brief Has 0x06 Program Longword command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_LONGWORD_CMD (0)
+    /* @brief Has 0x07 Program Phrase command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_PHRASE_CMD (1)
+    /* @brief Has 0x08 Erase Flash Block command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_BLOCK_CMD (1)
+    /* @brief Has 0x09 Erase Flash Sector command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_SECTOR_CMD (1)
+    /* @brief Has 0x0B Program Section command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_SECTION_CMD (1)
+    /* @brief Has 0x40 Read 1s All Blocks command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_BLOCKS_CMD (1)
+    /* @brief Has 0x41 Read Once command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_ONCE_CMD (1)
+    /* @brief Has 0x43 Program Once command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_ONCE_CMD (1)
+    /* @brief Has 0x44 Erase All Blocks command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_CMD (1)
+    /* @brief Has 0x45 Verify Backdoor Access Key command. */
+    #define FSL_FEATURE_FLASH_HAS_VERIFY_BACKDOOR_ACCESS_KEY_CMD (1)
+    /* @brief Has 0x46 Swap Control command. */
+    #define FSL_FEATURE_FLASH_HAS_SWAP_CONTROL_CMD (1)
+    /* @brief Has 0x49 Erase All Blocks Unsecure command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_UNSECURE_CMD (0)
+    /* @brief Has 0x4A Read 1s All Execute-only Segments command. */
+    #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0)
+    /* @brief Has 0x4B Erase All Execute-only Segments command. */
+    #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0)
+    /* @brief Has 0x80 Program Partition command. */
+    #define FSL_FEATURE_FLASH_HAS_PROGRAM_PARTITION_CMD (1)
+    /* @brief Has 0x81 Set FlexRAM Function command. */
+    #define FSL_FEATURE_FLASH_HAS_SET_FLEXRAM_FUNCTION_CMD (1)
+    /* @brief P-Flash Erase/Read 1st all block command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_BLOCK_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Erase sector command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SECTOR_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Rrogram/Verify section command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SECTION_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief P-Flash Read resource command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_RESOURCE_CMD_ADDRESS_ALIGMENT (8)
+    /* @brief P-Flash Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_CHECK_CMD_ADDRESS_ALIGMENT (4)
+    /* @brief P-Flash Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_PFLASH_SWAP_CONTROL_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief FlexNVM Erase/Read 1st all block command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief FlexNVM Erase sector command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_SECTOR_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief FlexNVM Rrogram/Verify section command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_SECTION_CMD_ADDRESS_ALIGMENT (16)
+    /* @brief FlexNVM Read resource command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_RESOURCE_CMD_ADDRESS_ALIGMENT (8)
+    /* @brief FlexNVM Program check command address alignment. */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_CHECK_CMD_ADDRESS_ALIGMENT (4)
+    /* @brief FlexNVM partition code 0000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0000 (0x00040000)
+    /* @brief FlexNVM partition code 0001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0001 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0010 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 0011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0011 (0x00038000)
+    /* @brief FlexNVM partition code 0100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0100 (0x00030000)
+    /* @brief FlexNVM partition code 0101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0101 (0x00020000)
+    /* @brief FlexNVM partition code 0110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0110 (0x00000000)
+    /* @brief FlexNVM partition code 0111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0111 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1000 (0x00000000)
+    /* @brief FlexNVM partition code 1001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1001 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1010 (0xFFFFFFFF)
+    /* @brief FlexNVM partition code 1011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1011 (0x00008000)
+    /* @brief FlexNVM partition code 1100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1100 (0x00010000)
+    /* @brief FlexNVM partition code 1101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1101 (0x00020000)
+    /* @brief FlexNVM partition code 1110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1110 (0x00040000)
+    /* @brief FlexNVM partition code 1111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1111 (0x00040000)
+    /* @brief Emulated eeprom size code 0000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0000 (0xFFFF)
+    /* @brief Emulated eeprom size code 0001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0001 (0xFFFF)
+    /* @brief Emulated eeprom size code 0010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0010 (0x1000)
+    /* @brief Emulated eeprom size code 0011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0011 (0x0800)
+    /* @brief Emulated eeprom size code 0100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0100 (0x0400)
+    /* @brief Emulated eeprom size code 0101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0101 (0x0200)
+    /* @brief Emulated eeprom size code 0110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0110 (0x0100)
+    /* @brief Emulated eeprom size code 0111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0111 (0x0080)
+    /* @brief Emulated eeprom size code 1000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1000 (0x0040)
+    /* @brief Emulated eeprom size code 1001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1001 (0x0020)
+    /* @brief Emulated eeprom size code 1010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1010 (0xFFFF)
+    /* @brief Emulated eeprom size code 1011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1011 (0xFFFF)
+    /* @brief Emulated eeprom size code 1100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1100 (0xFFFF)
+    /* @brief Emulated eeprom size code 1101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1101 (0xFFFF)
+    /* @brief Emulated eeprom size code 1110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1110 (0xFFFF)
+    /* @brief Emulated eeprom size code 1111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */
+    #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1111 (0x0000)
+#endif /* defined(CPU_MK66FN2M0VLQ18) || defined(CPU_MK66FN2M0VMD18) */
+
+/* FTM module features */
+
+/* @brief Number of channels. */
+#define FSL_FEATURE_FTM_CHANNEL_COUNTn(x) \
+    ((x) == FTM0 ? (8) : \
+    ((x) == FTM1 ? (2) : \
+    ((x) == FTM2 ? (2) : \
+    ((x) == FTM3 ? (8) : (-1)))))
+/* @brief Has counter reset by the selected input capture event (register bits C0SC[ICRST], C1SC[ICRST], ...). */
+#define FSL_FEATURE_FTM_HAS_COUNTER_RESET_BY_CAPTURE_EVENT (0)
+/* @brief Has extended deadtime value. */
+#define FSL_FEATURE_FTM_HAS_EXTENDED_DEADTIME_VALUE (0)
+/* @brief Enable pwm output for the module. */
+#define FSL_FEATURE_FTM_HAS_ENABLE_PWM_OUTPUT (0)
+/* @brief Has half-cycle reload for the module. */
+#define FSL_FEATURE_FTM_HAS_HALFCYCLE_RELOAD (0)
+/* @brief Has reload interrupt. */
+#define FSL_FEATURE_FTM_HAS_RELOAD_INTERRUPT (0)
+/* @brief Has reload initialization trigger. */
+#define FSL_FEATURE_FTM_HAS_RELOAD_INITIALIZATION_TRIGGER (0)
+
+/* GPIO module features */
+
+/* @brief Has fast (single cycle) access capability via a dedicated memory region. */
+#define FSL_FEATURE_GPIO_HAS_FAST_GPIO (0)
+/* @brief Has port input disable register (PIDR). */
+#define FSL_FEATURE_GPIO_HAS_INPUT_DISABLE (0)
+/* @brief Has dedicated interrupt vector. */
+#define FSL_FEATURE_GPIO_HAS_PORT_INTERRUPT_VECTOR (1)
+
+/* I2C module features */
+
+/* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH). */
+#define FSL_FEATURE_I2C_HAS_SMBUS (1)
+/* @brief Maximum supported baud rate in kilobit per second. */
+#define FSL_FEATURE_I2C_MAX_BAUD_KBPS (400)
+/* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value). */
+#define FSL_FEATURE_I2C_HAS_ERRATA_6070 (0)
+/* @brief Has DMA support (register bit C1[DMAEN]). */
+#define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1)
+/* @brief Has I2C bus start and stop detection (register bits FLT[SSIE], FLT[STARTF] and FLT[STOPF]). */
+#define FSL_FEATURE_I2C_HAS_START_STOP_DETECT (1)
+/* @brief Has I2C bus stop detection (register bits FLT[STOPIE] and FLT[STOPF]). */
+#define FSL_FEATURE_I2C_HAS_STOP_DETECT (0)
+/* @brief Has I2C bus stop hold off (register bit FLT[SHEN]). */
+#define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (1)
+/* @brief Maximum width of the glitch filter in number of bus clocks. */
+#define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (15)
+/* @brief Has control of the drive capability of the I2C pins. */
+#define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1)
+/* @brief Has double buffering support (register S2). */
+#define FSL_FEATURE_I2C_HAS_DOUBLE_BUFFERING (0)
+/* @brief Has double buffer enable. */
+#define FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE (0)
+
+/* SAI module features */
+
+/* @brief Receive/transmit FIFO size in item count (register bit fields TCSR[FRDE], TCSR[FRIE], TCSR[FRF], TCR1[TFW], RCSR[FRDE], RCSR[FRIE], RCSR[FRF], RCR1[RFW], registers TFRn, RFRn). */
+#define FSL_FEATURE_SAI_FIFO_COUNT (8)
+/* @brief Receive/transmit channel number (register bit fields TCR3[TCE], RCR3[RCE], registers TDRn and RDRn). */
+#define FSL_FEATURE_SAI_CHANNEL_COUNT (2)
+/* @brief Maximum words per frame (register bit fields TCR3[WDFL], TCR4[FRSZ], TMR[TWM], RCR3[WDFL], RCR4[FRSZ], RMR[RWM]). */
+#define FSL_FEATURE_SAI_MAX_WORDS_PER_FRAME (32)
+/* @brief Has support of combining multiple data channel FIFOs into single channel FIFO (register bit fields TCR3[CFR], TCR4[FCOMB], TFR0[WCP], TFR1[WCP], RCR3[CFR], RCR4[FCOMB], RFR0[RCP], RFR1[RCP]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_COMBINE_MODE (1)
+/* @brief Has packing of 8-bit and 16-bit data into each 32-bit FIFO word (register bit fields TCR4[FPACK], RCR4[FPACK]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_PACKING (1)
+/* @brief Configures when the SAI will continue transmitting after a FIFO error has been detected (register bit fields TCR4[FCONT], RCR4[FCONT]). */
+#define FSL_FEATURE_SAI_HAS_FIFO_FUNCTION_AFTER_ERROR (1)
+/* @brief Configures if the frame sync is generated internally, a frame sync is only generated when the FIFO warning flag is clear or continuously (register bit fields TCR4[ONDEM], RCR4[ONDEM]). */
+#define FSL_FEATURE_SAI_HAS_ON_DEMAND_MODE (1)
+/* @brief Simplified bit clock source and asynchronous/synchronous mode selection (register bit fields TCR2[CLKMODE], RCR2[CLKMODE]), in comparison with the exclusively implemented TCR2[SYNC,BCS,BCI,MSEL], RCR2[SYNC,BCS,BCI,MSEL]. */
+#define FSL_FEATURE_SAI_HAS_CLOCKING_MODE (0)
+/* @brief Has register for configuration of the MCLK divide ratio (register bit fields MDR[FRACT], MDR[DIVIDE]). */
+#define FSL_FEATURE_SAI_HAS_MCLKDIV_REGISTER (1)
+/* @brief Ihe interrupt source number */
+#define FSL_FEATURE_SAI_INT_SOURCE_NUM (2)
+/* @brief Has register of MCR. */
+#define FSL_FEATURE_SAI_HAS_MCR (1)
+/* @brief Has register of MDR */
+#define FSL_FEATURE_SAI_HAS_MDR (1)
+
+/* LLWU module features */
+
+/* @brief Maximum number of pins (maximal index plus one) connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN (32)
+/* @brief Has pins 8-15 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_EXTERNAL_PIN_GROUP2 (1)
+/* @brief Maximum number of internal modules connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE (8)
+/* @brief Number of digital filters. */
+#define FSL_FEATURE_LLWU_HAS_PIN_FILTER (4)
+/* @brief Has MF register. */
+#define FSL_FEATURE_LLWU_HAS_MF (1)
+/* @brief Has PF register. */
+#define FSL_FEATURE_LLWU_HAS_PF (1)
+/* @brief Has possibility to enable reset in low leakage power mode and enable digital filter for RESET pin (register LLWU_RST). */
+#define FSL_FEATURE_LLWU_HAS_RESET_ENABLE (0)
+/* @brief Has no internal module wakeup flag register. */
+#define FSL_FEATURE_LLWU_HAS_NO_INTERNAL_MODULE_WAKEUP_FLAG_REG (0)
+/* @brief Has external pin 0 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN0 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN0_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN0_GPIO_PIN (1)
+/* @brief Has external pin 1 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN1 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN1_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN1_GPIO_PIN (2)
+/* @brief Has external pin 2 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN2 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN2_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN2_GPIO_PIN (4)
+/* @brief Has external pin 3 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN3 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN3_GPIO_IDX (GPIOA_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN3_GPIO_PIN (4)
+/* @brief Has external pin 4 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN4 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN4_GPIO_IDX (GPIOA_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN4_GPIO_PIN (13)
+/* @brief Has external pin 5 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN5 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN5_GPIO_IDX (GPIOB_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN5_GPIO_PIN (0)
+/* @brief Has external pin 6 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN6 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN6_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN6_GPIO_PIN (1)
+/* @brief Has external pin 7 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN7 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN7_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN7_GPIO_PIN (3)
+/* @brief Has external pin 8 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN8 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN8_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN8_GPIO_PIN (4)
+/* @brief Has external pin 9 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN9 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN9_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN9_GPIO_PIN (5)
+/* @brief Has external pin 10 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN10 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN10_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN10_GPIO_PIN (6)
+/* @brief Has external pin 11 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN11 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN11_GPIO_IDX (GPIOC_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN11_GPIO_PIN (11)
+/* @brief Has external pin 12 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN12 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN12_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN12_GPIO_PIN (0)
+/* @brief Has external pin 13 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN13 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN13_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN13_GPIO_PIN (2)
+/* @brief Has external pin 14 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN14 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN14_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN14_GPIO_PIN (4)
+/* @brief Has external pin 15 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN15 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN15_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN15_GPIO_PIN (6)
+/* @brief Has external pin 16 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN16 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN16_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN16_GPIO_PIN (6)
+/* @brief Has external pin 17 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN17 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN17_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN17_GPIO_PIN (9)
+/* @brief Has external pin 18 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN18 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN18_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN18_GPIO_PIN (10)
+/* @brief Has external pin 19 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN19 (0)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN19_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN19_GPIO_PIN (0)
+/* @brief Has external pin 20 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN20 (0)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN20_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN20_GPIO_PIN (0)
+/* @brief Has external pin 21 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN21 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN21_GPIO_IDX (GPIOE_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN21_GPIO_PIN (25)
+/* @brief Has external pin 22 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN22 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN22_GPIO_IDX (GPIOA_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN22_GPIO_PIN (10)
+/* @brief Has external pin 23 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN23 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN23_GPIO_IDX (GPIOA_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN23_GPIO_PIN (11)
+/* @brief Has external pin 24 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN24 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN24_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN24_GPIO_PIN (8)
+/* @brief Has external pin 25 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN25 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN25_GPIO_IDX (GPIOD_IDX)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN25_GPIO_PIN (11)
+/* @brief Has external pin 26 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN26 (0)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN26_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN26_GPIO_PIN (0)
+/* @brief Has external pin 27 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN27 (0)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN27_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN27_GPIO_PIN (0)
+/* @brief Has external pin 28 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN28 (0)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN28_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN28_GPIO_PIN (0)
+/* @brief Has external pin 29 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN29 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN29_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN29_GPIO_PIN (0)
+/* @brief Has external pin 30 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN30 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN30_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN30_GPIO_PIN (0)
+/* @brief Has external pin 31 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN31 (1)
+/* @brief Index of port of external pin. */
+#define FSL_FEATURE_LLWU_PIN31_GPIO_IDX (0)
+/* @brief Number of external pin port on specified port. */
+#define FSL_FEATURE_LLWU_PIN31_GPIO_PIN (0)
+/* @brief Has internal module 0 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE0 (1)
+/* @brief Has internal module 1 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE1 (1)
+/* @brief Has internal module 2 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE2 (1)
+/* @brief Has internal module 3 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE3 (1)
+/* @brief Has internal module 4 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE4 (1)
+/* @brief Has internal module 5 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE5 (1)
+/* @brief Has internal module 6 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE6 (0)
+/* @brief Has internal module 7 connected to LLWU device. */
+#define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE7 (1)
+/* @brief Has Version ID Register (LLWU_VERID). */
+#define FSL_FEATURE_LLWU_HAS_VERID (0)
+/* @brief Has Parameter Register (LLWU_PARAM). */
+#define FSL_FEATURE_LLWU_HAS_PARAM (0)
+/* @brief Width of registers of the LLWU. */
+#define FSL_FEATURE_LLWU_REG_BITWIDTH (8)
+/* @brief Has DMA Enable register (LLWU_DE). */
+#define FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG (0)
+
+/* LMEM module features */
+
+/* @brief Has process identifier support. */
+#define FSL_FEATURE_LMEM_HAS_SYSTEMBUS_CACHE (0)
+/* @brief L1 ICACHE line size in byte. */
+#define FSL_FEATURE_L1ICACHE_LINESIZE_BYTE (16)
+/* @brief L1 DCACHE line size in byte. */
+#define FSL_FEATURE_L1DCACHE_LINESIZE_BYTE (16)
+
+/* LPTMR module features */
+
+/* @brief Has shared interrupt handler with another LPTMR module. */
+#define FSL_FEATURE_LPTMR_HAS_SHARED_IRQ_HANDLER (0)
+/* @brief Whether LPTMR counter is 32 bits width. */
+#define FSL_FEATURE_LPTMR_CNR_WIDTH_IS_32B (0)
+/* @brief Has timer DMA request enable (register bit CSR[TDRE]). */
+#define FSL_FEATURE_LPTMR_HAS_CSR_TDRE (0)
+
+/* LPUART module features */
+
+/* @brief LPUART0 and LPUART1 has shared interrupt vector. */
+#define FSL_FEATURE_LPUART_HAS_SHARED_IRQ0_IRQ1 (0)
+/* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */
+#define FSL_FEATURE_LPUART_HAS_IRQ_EXTENDED_FUNCTIONS (0)
+/* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_LOW_POWER_UART_SUPPORT (1)
+/* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_HAS_FIFO (0)
+/* @brief Has 32-bit register MODIR */
+#define FSL_FEATURE_LPUART_HAS_MODIR (1)
+/* @brief Hardware flow control (RTS, CTS) is supported. */
+#define FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT (1)
+/* @brief Infrared (modulation) is supported. */
+#define FSL_FEATURE_LPUART_HAS_IR_SUPPORT (1)
+/* @brief 2 bits long stop bit is available. */
+#define FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT (1)
+/* @brief If 10-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_10BIT_DATA_SUPPORT (1)
+/* @brief If 7-bit mode is supported. */
+#define FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT (0)
+/* @brief Baud rate fine adjustment is available. */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (0)
+/* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_RX_RESYNC_SUPPORT (1)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_LPUART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (1)
+/* @brief Peripheral type. */
+#define FSL_FEATURE_LPUART_IS_SCI (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_LPUART_FIFO_SIZEn(x) (0)
+/* @brief Maximal data width without parity bit. */
+#define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_NO_PARITY (10)
+/* @brief Maximal data width with parity bit. */
+#define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_PARITY (9)
+/* @brief Supports two match addresses to filter incoming frames. */
+#define FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING (1)
+/* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_DMA_ENABLE (1)
+/* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */
+#define FSL_FEATURE_LPUART_HAS_DMA_SELECT (0)
+/* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */
+#define FSL_FEATURE_LPUART_HAS_BIT_ORDER_SELECT (1)
+/* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */
+#define FSL_FEATURE_LPUART_HAS_SMART_CARD_SUPPORT (0)
+/* @brief Has improved smart card (ISO7816 protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_IMPROVED_SMART_CARD_SUPPORT (0)
+/* @brief Has local operation network (CEA709.1-B protocol) support. */
+#define FSL_FEATURE_LPUART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0)
+/* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */
+#define FSL_FEATURE_LPUART_HAS_32BIT_REGISTERS (1)
+/* @brief Lin break detect available (has bit BAUD[LBKDIE]). */
+#define FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT (1)
+/* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */
+#define FSL_FEATURE_LPUART_HAS_WAIT_MODE_OPERATION (0)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+/* @brief Has separate RX and TX interrupts. */
+#define FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (0)
+/* @brief Has LPAURT_PARAM. */
+#define FSL_FEATURE_LPUART_HAS_PARAM (0)
+/* @brief Has LPUART_VERID. */
+#define FSL_FEATURE_LPUART_HAS_VERID (0)
+/* @brief Has LPUART_GLOBAL. */
+#define FSL_FEATURE_LPUART_HAS_GLOBAL (0)
+/* @brief Has LPUART_PINCFG. */
+#define FSL_FEATURE_LPUART_HAS_PINCFG (0)
+
+/* MCG module features */
+
+/* @brief PRDIV base value (divider of register bit field [PRDIV] zero value). */
+#define FSL_FEATURE_MCG_PLL_PRDIV_BASE (1)
+/* @brief Maximum PLL external reference divider value (max. value of register bit field C5[PRVDIV]). */
+#define FSL_FEATURE_MCG_PLL_PRDIV_MAX (7)
+/* @brief VCO divider base value (multiply factor of register bit field C6[VDIV] zero value). */
+#define FSL_FEATURE_MCG_PLL_VDIV_BASE (16)
+/* @brief PLL reference clock low range. OSCCLK/PLL_R. */
+#define FSL_FEATURE_MCG_PLL_REF_MIN (8000000)
+/* @brief PLL reference clock high range. OSCCLK/PLL_R. */
+#define FSL_FEATURE_MCG_PLL_REF_MAX (16000000)
+/* @brief The PLL clock is divided by 2 before VCO divider. */
+#define FSL_FEATURE_MCG_HAS_PLL_INTERNAL_DIV (1)
+/* @brief FRDIV supports 1280. */
+#define FSL_FEATURE_MCG_FRDIV_SUPPORT_1280 (1)
+/* @brief FRDIV supports 1536. */
+#define FSL_FEATURE_MCG_FRDIV_SUPPORT_1536 (1)
+/* @brief MCGFFCLK divider. */
+#define FSL_FEATURE_MCG_FFCLK_DIV (1)
+/* @brief Is PLL clock divided by 2 before MCG PLL/FLL clock selection in the SIM module. */
+#define FSL_FEATURE_MCG_HAS_PLL_EXTRA_DIV (0)
+/* @brief Has 32kHz RTC external reference clock (register bits C8[LOCS1], C8[CME1], C8[LOCRE1] and RTC module are present). */
+#define FSL_FEATURE_MCG_HAS_RTC_32K (1)
+/* @brief Has PLL1 external reference clock (registers C10, C11, C12, S2). */
+#define FSL_FEATURE_MCG_HAS_PLL1 (0)
+/* @brief Has 48MHz internal oscillator. */
+#define FSL_FEATURE_MCG_HAS_IRC_48M (1)
+/* @brief Has OSC1 external oscillator (registers C10, C11, C12, S2). */
+#define FSL_FEATURE_MCG_HAS_OSC1 (0)
+/* @brief Has fast internal reference clock fine trim (register bit C2[FCFTRIM]). */
+#define FSL_FEATURE_MCG_HAS_FCFTRIM (1)
+/* @brief Has PLL loss of lock reset (register bit C8[LOLRE]). */
+#define FSL_FEATURE_MCG_HAS_LOLRE (1)
+/* @brief Has MCG OSC clock selection (register bit C7[OSCSEL]). */
+#define FSL_FEATURE_MCG_USE_OSCSEL (1)
+/* @brief Has PLL external reference selection (register bits C5[PLLREFSEL0] and C11[PLLREFSEL1]). */
+#define FSL_FEATURE_MCG_USE_PLLREFSEL (0)
+/* @brief TBD */
+#define FSL_FEATURE_MCG_USE_SYSTEM_CLOCK (0)
+/* @brief Has phase-locked loop (PLL) (register C5 and bits C6[VDIV], C6[PLLS], C6[LOLIE0], S[PLLST], S[LOCK0], S[LOLS0]). */
+#define FSL_FEATURE_MCG_HAS_PLL (1)
+/* @brief Has phase-locked loop (PLL) PRDIV (register C5[PRDIV]. */
+#define FSL_FEATURE_MCG_HAS_PLL_PRDIV (1)
+/* @brief Has phase-locked loop (PLL) VDIV (register C6[VDIV]. */
+#define FSL_FEATURE_MCG_HAS_PLL_VDIV (1)
+/* @brief PLL/OSC related register bit fields have PLL/OSC index in their name. */
+#define FSL_FEATURE_MCG_HAS_PLL_OSC_INDEX (0)
+/* @brief Has frequency-locked loop (FLL) (register ATCVH, ATCVL and bits C1[IREFS], C1[FRDIV]). */
+#define FSL_FEATURE_MCG_HAS_FLL (1)
+/* @brief Has PLL external to MCG (C9[PLL_CME], C9[PLL_LOCRE], C9[EXT_PLL_LOCS]). */
+#define FSL_FEATURE_MCG_HAS_EXTERNAL_PLL (1)
+/* @brief Has crystal oscillator or external reference clock low power controls (register bits C2[HGO], C2[RANGE]). */
+#define FSL_FEATURE_MCG_HAS_EXT_REF_LOW_POWER_CONTROL (1)
+/* @brief Has PLL/FLL selection as MCG output (register bit C6[PLLS]). */
+#define FSL_FEATURE_MCG_HAS_PLL_FLL_SELECTION (1)
+/* @brief Has PLL output selection (PLL0/PLL1, PLL/external PLL) (register bit C11[PLLCS]). */
+#define FSL_FEATURE_MCG_HAS_PLL_OUTPUT_SELECTION (1)
+/* @brief Has automatic trim machine (registers ATCVH, ATCVL and bits SC[ATMF], SC[ATMS], SC[ATME]). */
+#define FSL_FEATURE_MCG_HAS_AUTO_TRIM_MACHINE (1)
+/* @brief Has external clock monitor (register bit C6[CME]). */
+#define FSL_FEATURE_MCG_HAS_EXTERNAL_CLOCK_MONITOR (1)
+/* @brief Has low frequency internal reference clock (IRC) (registers LTRIMRNG, LFRIM, LSTRIM and bit MC[LIRC_DIV2]). */
+#define FSL_FEATURE_MCG_HAS_LOW_FREQ_IRC (0)
+/* @brief Has high frequency internal reference clock (IRC) (registers HCTRIM, HTTRIM, HFTRIM and bit MC[HIRCEN]). */
+#define FSL_FEATURE_MCG_HAS_HIGH_FREQ_IRC (0)
+/* @brief Has PEI mode or PBI mode. */
+#define FSL_FEATURE_MCG_HAS_PLL_INTERNAL_MODE (0)
+/* @brief Reset clock mode is BLPI. */
+#define FSL_FEATURE_MCG_RESET_IS_BLPI (0)
+
+/* interrupt module features */
+
+/* @brief Lowest interrupt request number. */
+#define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
+/* @brief Highest interrupt request number. */
+#define FSL_FEATURE_INTERRUPT_IRQ_MAX (99)
+
+/* OSC module features */
+
+/* @brief Has OSC1 external oscillator. */
+#define FSL_FEATURE_OSC_HAS_OSC1 (0)
+/* @brief Has OSC0 external oscillator. */
+#define FSL_FEATURE_OSC_HAS_OSC0 (0)
+/* @brief Has OSC external oscillator (without index). */
+#define FSL_FEATURE_OSC_HAS_OSC (1)
+/* @brief Number of OSC external oscillators. */
+#define FSL_FEATURE_OSC_OSC_COUNT (1)
+/* @brief Has external reference clock divider (register bit field DIV[ERPS]). */
+#define FSL_FEATURE_OSC_HAS_EXT_REF_CLOCK_DIVIDER (1)
+
+/* PDB module features */
+
+/* @brief Define the count of supporting ADC pre-trigger for each channel. */
+#define FSL_FEATURE_PDB_ADC_PRE_CHANNEL_COUNT (2)
+/* @brief Has DAC support. */
+#define FSL_FEATURE_PDB_HAS_DAC (1)
+/* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */
+#define FSL_FEATURE_PDB_HAS_SHARED_IRQ_HANDLER (0)
+
+/* PIT module features */
+
+/* @brief Number of channels (related to number of registers LDVALn, CVALn, TCTRLn, TFLGn). */
+#define FSL_FEATURE_PIT_TIMER_COUNT (4)
+/* @brief Has lifetime timer (related to existence of registers LTMR64L and LTMR64H). */
+#define FSL_FEATURE_PIT_HAS_LIFETIME_TIMER (1)
+/* @brief Has chain mode (related to existence of register bit field TCTRLn[CHN]). */
+#define FSL_FEATURE_PIT_HAS_CHAIN_MODE (1)
+/* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */
+#define FSL_FEATURE_PIT_HAS_SHARED_IRQ_HANDLER (0)
+
+/* PMC module features */
+
+/* @brief Has Bandgap Enable In VLPx Operation support. */
+#define FSL_FEATURE_PMC_HAS_BGEN (1)
+/* @brief Has Bandgap Buffer Enable. */
+#define FSL_FEATURE_PMC_HAS_BGBE (1)
+/* @brief Has Bandgap Buffer Drive Select. */
+#define FSL_FEATURE_PMC_HAS_BGBDS (0)
+/* @brief Has Low-Voltage Detect Voltage Select support. */
+#define FSL_FEATURE_PMC_HAS_LVDV (1)
+/* @brief Has Low-Voltage Warning Voltage Select support. */
+#define FSL_FEATURE_PMC_HAS_LVWV (1)
+/* @brief Has LPO. */
+#define FSL_FEATURE_PMC_HAS_LPO (0)
+/* @brief Has VLPx option PMC_REGSC[VLPO]. */
+#define FSL_FEATURE_PMC_HAS_VLPO (0)
+/* @brief Has acknowledge isolation support. */
+#define FSL_FEATURE_PMC_HAS_ACKISO (1)
+/* @brief Has Regulator In Full Performance Mode Status Bit PMC_REGSC[REGFPM]. */
+#define FSL_FEATURE_PMC_HAS_REGFPM (0)
+/* @brief Has Regulator In Run Regulation Status Bit PMC_REGSC[REGONS]. */
+#define FSL_FEATURE_PMC_HAS_REGONS (1)
+/* @brief Has PMC_HVDSC1. */
+#define FSL_FEATURE_PMC_HAS_HVDSC1 (0)
+/* @brief Has PMC_PARAM. */
+#define FSL_FEATURE_PMC_HAS_PARAM (0)
+/* @brief Has PMC_VERID. */
+#define FSL_FEATURE_PMC_HAS_VERID (0)
+
+/* PORT module features */
+
+/* @brief Has control lock (register bit PCR[LK]). */
+#define FSL_FEATURE_PORT_HAS_PIN_CONTROL_LOCK (1)
+/* @brief Has open drain control (register bit PCR[ODE]). */
+#define FSL_FEATURE_PORT_HAS_OPEN_DRAIN (1)
+/* @brief Has digital filter (registers DFER, DFCR and DFWR). */
+#define FSL_FEATURE_PORT_HAS_DIGITAL_FILTER (1)
+/* @brief Has DMA request (register bit field PCR[IRQC] values). */
+#define FSL_FEATURE_PORT_HAS_DMA_REQUEST (1)
+/* @brief Has pull resistor selection available. */
+#define FSL_FEATURE_PORT_HAS_PULL_SELECTION (1)
+/* @brief Has pull resistor enable (register bit PCR[PE]). */
+#define FSL_FEATURE_PORT_HAS_PULL_ENABLE (1)
+/* @brief Has slew rate control (register bit PCR[SRE]). */
+#define FSL_FEATURE_PORT_HAS_SLEW_RATE (1)
+/* @brief Has passive filter (register bit field PCR[PFE]). */
+#define FSL_FEATURE_PORT_HAS_PASSIVE_FILTER (1)
+/* @brief Has drive strength control (register bit PCR[DSE]). */
+#define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH (1)
+/* @brief Has separate drive strength register (HDRVE). */
+#define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH_REGISTER (0)
+/* @brief Has glitch filter (register IOFLT). */
+#define FSL_FEATURE_PORT_HAS_GLITCH_FILTER (0)
+/* @brief Defines width of PCR[MUX] field. */
+#define FSL_FEATURE_PORT_PCR_MUX_WIDTH (3)
+/* @brief Has dedicated interrupt vector. */
+#define FSL_FEATURE_PORT_HAS_INTERRUPT_VECTOR (1)
+/* @brief Has multiple pin IRQ configuration (register GICLR and GICHR). */
+#define FSL_FEATURE_PORT_HAS_MULTIPLE_IRQ_CONFIG (0)
+/* @brief Defines whether PCR[IRQC] bit-field has flag states. */
+#define FSL_FEATURE_PORT_HAS_IRQC_FLAG (0)
+/* @brief Defines whether PCR[IRQC] bit-field has trigger states. */
+#define FSL_FEATURE_PORT_HAS_IRQC_TRIGGER (0)
+
+/* RCM module features */
+
+/* @brief Has Loss-of-Lock Reset support. */
+#define FSL_FEATURE_RCM_HAS_LOL (1)
+/* @brief Has Loss-of-Clock Reset support. */
+#define FSL_FEATURE_RCM_HAS_LOC (1)
+/* @brief Has JTAG generated Reset support. */
+#define FSL_FEATURE_RCM_HAS_JTAG (1)
+/* @brief Has EzPort generated Reset support. */
+#define FSL_FEATURE_RCM_HAS_EZPORT (1)
+/* @brief Has bit-field indicating EZP_MS_B pin state during last reset. */
+#define FSL_FEATURE_RCM_HAS_EZPMS (1)
+/* @brief Has boot ROM configuration, MR[BOOTROM], FM[FORCEROM] */
+#define FSL_FEATURE_RCM_HAS_BOOTROM (0)
+/* @brief Has sticky system reset status register RCM_SSRS0 and RCM_SSRS1. */
+#define FSL_FEATURE_RCM_HAS_SSRS (1)
+/* @brief Has Version ID Register (RCM_VERID). */
+#define FSL_FEATURE_RCM_HAS_VERID (0)
+/* @brief Has Parameter Register (RCM_PARAM). */
+#define FSL_FEATURE_RCM_HAS_PARAM (0)
+/* @brief Has Reset Interrupt Enable Register RCM_SRIE. */
+#define FSL_FEATURE_RCM_HAS_SRIE (0)
+/* @brief Width of registers of the RCM. */
+#define FSL_FEATURE_RCM_REG_WIDTH (8)
+/* @brief Has Core 1 generated Reset support RCM_SRS[CORE1] */
+#define FSL_FEATURE_RCM_HAS_CORE1 (0)
+/* @brief Has MDM-AP system reset support RCM_SRS1[MDM_AP] */
+#define FSL_FEATURE_RCM_HAS_MDM_AP (1)
+/* @brief Has wakeup reset feature. Register bit SRS[WAKEUP]. */
+#define FSL_FEATURE_RCM_HAS_WAKEUP (1)
+
+/* RTC module features */
+
+/* @brief Has wakeup pin. */
+#define FSL_FEATURE_RTC_HAS_WAKEUP_PIN (1)
+/* @brief Has wakeup pin selection (bit field CR[WPS]). */
+#define FSL_FEATURE_RTC_HAS_WAKEUP_PIN_SELECTION (1)
+/* @brief Has low power features (registers MER, MCLR and MCHR). */
+#define FSL_FEATURE_RTC_HAS_MONOTONIC (1)
+/* @brief Has read/write access control (registers WAR and RAR). */
+#define FSL_FEATURE_RTC_HAS_ACCESS_CONTROL (1)
+/* @brief Has security features (registers TTSR, MER, MCLR and MCHR). */
+#define FSL_FEATURE_RTC_HAS_SECURITY (1)
+/* @brief Has RTC_CLKIN available. */
+#define FSL_FEATURE_RTC_HAS_RTC_CLKIN (0)
+/* @brief Has prescaler adjust for LPO. */
+#define FSL_FEATURE_RTC_HAS_LPO_ADJUST (0)
+/* @brief Has Clock Pin Enable field. */
+#define FSL_FEATURE_RTC_HAS_CPE (0)
+/* @brief Has Timer Seconds Interrupt Configuration field. */
+#define FSL_FEATURE_RTC_HAS_TSIC (0)
+/* @brief Has OSC capacitor setting RTC_CR[SC2P ~ SC16P] */
+#define FSL_FEATURE_RTC_HAS_OSC_SCXP (1)
+
+/* SDHC module features */
+
+/* @brief Has external DMA support (register bit VENDOR[EXTDMAEN]). */
+#define FSL_FEATURE_SDHC_HAS_EXTERNAL_DMA_SUPPORT (0)
+/* @brief Has support of 3.0V voltage (register bit HTCAPBLT[VS30]). */
+#define FSL_FEATURE_SDHC_HAS_V300_SUPPORT (0)
+/* @brief Has support of 1.8V voltage (register bit HTCAPBLT[VS18]). */
+#define FSL_FEATURE_SDHC_HAS_V180_SUPPORT (0)
+
+/* SIM module features */
+
+/* @brief Has USB FS divider. */
+#define FSL_FEATURE_SIM_USBFS_USE_SPECIAL_DIVIDER (0)
+/* @brief Is PLL clock divided by 2 before MCG PLL/FLL clock selection. */
+#define FSL_FEATURE_SIM_PLLCLK_USE_SPECIAL_DIVIDER (0)
+/* @brief Has RAM size specification (register bit field SOPT1[RAMSIZE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_RAMSIZE (1)
+/* @brief Has 32k oscillator clock output (register bit SOPT1[OSC32KOUT]). */
+#define FSL_FEATURE_SIM_OPT_HAS_OSC32K_OUT (0)
+/* @brief Has 32k oscillator clock selection (register bit field SOPT1[OSC32KSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_OSC32K_SELECTION (1)
+/* @brief 32k oscillator clock selection width (width of register bit field SOPT1[OSC32KSEL]). */
+#define FSL_FEATURE_SIM_OPT_OSC32K_SELECTION_WIDTH (2)
+/* @brief Has RTC clock output selection (register bit SOPT2[RTCCLKOUTSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_RTC_CLOCK_OUT_SELECTION (1)
+/* @brief Has USB voltage regulator (register bits SOPT1[USBVSTBY], SOPT1[USBSSTBY], SOPT1[USBREGEN], SOPT1CFG[URWE], SOPT1CFG[UVSWE], SOPT1CFG[USSWE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR (1)
+/* @brief USB has integrated PHY (register bits USBPHYCTL[USBVREGSEL], USBPHYCTL[USBVREGPD], USBPHYCTL[USB3VOUTTRG], USBPHYCTL[USBDISILIM], SOPT2[USBSLSRC], SOPT2[USBREGEN]). */
+#define FSL_FEATURE_SIM_OPT_HAS_USB_PHY (1)
+/* @brief Has PTD7 pad drive strength control (register bit SOPT2[PTD7PAD]). */
+#define FSL_FEATURE_SIM_OPT_HAS_PTD7PAD (0)
+/* @brief Has FlexBus security level selection (register bit SOPT2[FBSL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FBSL (1)
+/* @brief Has number of FlexBus hold cycle before FlexBus can release bus (register bit SOPT6[PCR]). */
+#define FSL_FEATURE_SIM_OPT_HAS_PCR (0)
+/* @brief Has number of NFC hold cycle in case of FlexBus request (register bit SOPT6[MCC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_MCC (0)
+/* @brief Has UART open drain enable (register bits UARTnODE, where n is a number, in register SOPT5). */
+#define FSL_FEATURE_SIM_OPT_HAS_ODE (0)
+/* @brief Number of LPUART modules (number of register bits LPUARTn, where n is a number, in register SCGC5). */
+#define FSL_FEATURE_SIM_OPT_LPUART_COUNT (1)
+/* @brief Number of UART modules (number of register bits UARTn, where n is a number, in register SCGC4). */
+#define FSL_FEATURE_SIM_OPT_UART_COUNT (4)
+/* @brief Has UART0 open drain enable (register bit SOPT5[UART0ODE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART0_ODE (0)
+/* @brief Has UART1 open drain enable (register bit SOPT5[UART1ODE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART1_ODE (0)
+/* @brief Has UART2 open drain enable (register bit SOPT5[UART2ODE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART2_ODE (0)
+/* @brief Has LPUART0 open drain enable (register bit SOPT5[LPUART0ODE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART0_ODE (0)
+/* @brief Has LPUART1 open drain enable (register bit SOPT5[LPUART1ODE]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART1_ODE (0)
+/* @brief Has CMT/UART pad drive strength control (register bit SOPT2[CMTUARTPAD]). */
+#define FSL_FEATURE_SIM_OPT_HAS_CMTUARTPAD (0)
+/* @brief Has LPUART0 transmit data source selection (register bit SOPT5[LPUART0TXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART0_TX_SRC (1)
+/* @brief Has LPUART0 receive data source selection (register bit SOPT5[LPUART0RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART0_RX_SRC (1)
+/* @brief Has LPUART1 transmit data source selection (register bit SOPT5[LPUART1TXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART1_TX_SRC (0)
+/* @brief Has LPUART1 receive data source selection (register bit SOPT5[LPUART1RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART1_RX_SRC (0)
+/* @brief Has UART0 transmit data source selection (register bit SOPT5[UART0TXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART0_TX_SRC (1)
+/* @brief UART0 transmit data source selection width (width of register bit SOPT5[UART0TXSRC]). */
+#define FSL_FEATURE_SIM_OPT_UART0_TX_SRC_WIDTH (2)
+/* @brief Has UART0 receive data source selection (register bit SOPT5[UART0RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART0_RX_SRC (1)
+/* @brief UART0 receive data source selection width (width of register bit SOPT5[UART0RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_UART0_RX_SRC_WIDTH (2)
+/* @brief Has UART1 transmit data source selection (register bit SOPT5[UART1TXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART1_TX_SRC (1)
+/* @brief Has UART1 receive data source selection (register bit SOPT5[UART1RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART1_RX_SRC (1)
+/* @brief UART1 receive data source selection width (width of register bit SOPT5[UART1RXSRC]). */
+#define FSL_FEATURE_SIM_OPT_UART1_RX_SRC_WIDTH (2)
+/* @brief Has FTM module(s) configuration. */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM (1)
+/* @brief Number of FTM modules. */
+#define FSL_FEATURE_SIM_OPT_FTM_COUNT (4)
+/* @brief Number of FTM triggers with selectable source. */
+#define FSL_FEATURE_SIM_OPT_FTM_TRIGGER_COUNT (2)
+/* @brief Has FTM0 triggers source selection (register bits SOPT4[FTM0TRGnSRC], where n is a number). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM0_TRIGGER (1)
+/* @brief Has FTM3 triggers source selection (register bits SOPT4[FTM3TRGnSRC], where n is a number). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM3_TRIGGER (1)
+/* @brief Has FTM1 channel 0 input capture source selection (register bit SOPT4[FTM1CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM1_CHANNELS (1)
+/* @brief Has FTM2 channel 0 input capture source selection (register bit SOPT4[FTM2CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM2_CHANNELS (1)
+/* @brief Has FTM3 channel 0 input capture source selection (register bit SOPT4[FTM3CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM3_CHANNELS (0)
+/* @brief Has FTM2 channel 1 input capture source selection (register bit SOPT4[FTM2CH1SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM2_CHANNEL1 (1)
+/* @brief Number of configurable FTM0 fault detection input (number of register bits SOPT4[FTM0FLTn], where n is a number starting from zero). */
+#define FSL_FEATURE_SIM_OPT_FTM0_FAULT_COUNT (4)
+/* @brief Number of configurable FTM1 fault detection input (number of register bits SOPT4[FTM1FLTn], where n is a number starting from zero). */
+#define FSL_FEATURE_SIM_OPT_FTM1_FAULT_COUNT (1)
+/* @brief Number of configurable FTM2 fault detection input (number of register bits SOPT4[FTM2FLTn], where n is a number starting from zero). */
+#define FSL_FEATURE_SIM_OPT_FTM2_FAULT_COUNT (1)
+/* @brief Number of configurable FTM3 fault detection input (number of register bits SOPT4[FTM3FLTn], where n is a number starting from zero). */
+#define FSL_FEATURE_SIM_OPT_FTM3_FAULT_COUNT (1)
+/* @brief Has FTM hardware trigger 0 software synchronization (register bit SOPT8[FTMnSYNCBIT], where n is a module instance index). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM_TRIGGER_SYNC (1)
+/* @brief Has FTM channels output source selection (register bit SOPT8[FTMxOCHnSRC], where x is a module instance index and n is a channel index). */
+#define FSL_FEATURE_SIM_OPT_HAS_FTM_CHANNELS_OUTPUT_SRC (1)
+/* @brief Has TPM module(s) configuration. */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM (1)
+/* @brief The highest TPM module index. */
+#define FSL_FEATURE_SIM_OPT_MAX_TPM_INDEX (2)
+/* @brief Has TPM module with index 0. */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM0 (0)
+/* @brief Has TPM0 clock selection (register bit field SOPT4[TPM0CLKSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM0_CLK_SEL (0)
+/* @brief Is TPM channels configuration in the SOPT4 (not SOPT9) register (register bits TPMnCH0SRC, TPMnCLKSEL, where n is a module instance index). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM_CHANNELS_CONFIG_IN_SOPT4_REG (0)
+/* @brief Has TPM1 channel 0 input capture source selection (register bit field SOPT4[TPM1CH0SRC] or SOPT9[TPM1CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM1_CH0_SRC_SELECTION (1)
+/* @brief Has TPM1 clock selection (register bit field SOPT4[TPM1CLKSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM1_CLK_SEL (0)
+/* @brief TPM1 channel 0 input capture source selection width (width of register bit field SOPT4[TPM1CH0SRC] or SOPT9[TPM1CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_TPM1_CH0_SRC_SELECTION_WIDTH (1)
+/* @brief Has TPM2 channel 0 input capture source selection (register bit field SOPT4[TPM2CH0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM2_CH0_SRC_SELECTION (0)
+/* @brief Has TPM2 clock selection (register bit field SOPT4[TPM2CLKSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPM2_CLK_SEL (0)
+/* @brief Has PLL/FLL clock selection (register bit field SOPT2[PLLFLLSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_PLL_FLL_SELECTION (1)
+/* @brief PLL/FLL clock selection width (width of register bit field SOPT2[PLLFLLSEL]). */
+#define FSL_FEATURE_SIM_OPT_PLL_FLL_SELECTION_WIDTH (1)
+/* @brief Has NFC clock source selection (register bit SOPT2[NFCSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_NFCSRC (0)
+/* @brief Has eSDHC clock source selection (register bit SOPT2[ESDHCSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_ESDHCSRC (0)
+/* @brief Has SDHC clock source selection (register bit SOPT2[SDHCSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_SDHCSRC (1)
+/* @brief Has LCDC clock source selection (register bits SOPT2[LCDCSRC], SOPT2[LCDC_CLKSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LCDCSRC (0)
+/* @brief Has ENET timestamp clock source selection (register bit SOPT2[TIMESRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TIMESRC (1)
+/* @brief Has ENET RMII clock source selection (register bit SOPT2[RMIISRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_RMIISRC (1)
+/* @brief Has USB clock source selection (register bit SOPT2[USBSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_USBSRC (1)
+/* @brief Has USB FS clock source selection (register bit SOPT2[USBFSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_USBFSRC (0)
+/* @brief Has USB HS clock source selection (register bit SOPT2[USBHSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_USBHSRC (0)
+/* @brief Has LPUART clock source selection (register bit SOPT2[LPUARTSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUARTSRC (1)
+/* @brief Has LPUART0 clock source selection (register bit SOPT2[LPUART0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART0SRC (0)
+/* @brief Has LPUART1 clock source selection (register bit SOPT2[LPUART1SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_LPUART1SRC (0)
+/* @brief Has FLEXIOSRC clock source selection (register bit SOPT2[FLEXIOSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_FLEXIOSRC (0)
+/* @brief Has UART0 clock source selection (register bit SOPT2[UART0SRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_UART0SRC (0)
+/* @brief Has TPM clock source selection (register bit SOPT2[TPMSRC]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TPMSRC (1)
+/* @brief Has debug trace clock selection (register bit SOPT2[TRACECLKSEL]). */
+#define FSL_FEATURE_SIM_OPT_HAS_TRACE_CLKSEL (1)
+/* @brief Number of ADC modules (register bits SOPT7[ADCnTRGSEL], SOPT7[ADCnPRETRGSEL], SOPT7[ADCnALTTRGSEL], where n is a module instance index). */
+#define FSL_FEATURE_SIM_OPT_ADC_COUNT (2)
+/* @brief ADC0 alternate trigger enable width (width of bit field ADC0ALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADC0ALTTRGEN_WIDTH (1)
+/* @brief ADC1 alternate trigger enable width (width of bit field ADC1ALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADC1ALTTRGEN_WIDTH (1)
+/* @brief ADC2 alternate trigger enable width (width of bit field ADC2ALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADC2ALTTRGEN_WIDTH (0)
+/* @brief ADC3 alternate trigger enable width (width of bit field ADC3ALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADC3ALTTRGEN_WIDTH (0)
+/* @brief HSADC0 converter A alternate trigger enable width (width of bit field HSADC0AALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_HSADC0AALTTRGEN_WIDTH (0)
+/* @brief HSADC1 converter A alternate trigger enable width (width of bit field HSADC1AALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_HSADC1AALTTRGEN_WIDTH (0)
+/* @brief ADC converter A alternate trigger enable width (width of bit field ADCAALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADCAALTTRGEN_WIDTH (0)
+/* @brief HSADC0 converter B alternate trigger enable width (width of bit field HSADC0BALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_HSADC0BALTTRGEN_WIDTH (0)
+/* @brief HSADC1 converter B alternate trigger enable width (width of bit field HSADC1BALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_HSADC1BALTTRGEN_WIDTH (0)
+/* @brief ADC converter B alternate trigger enable width (width of bit field ADCBALTTRGEN of register SOPT7). */
+#define FSL_FEATURE_SIM_OPT_ADCBALTTRGEN_WIDTH (0)
+/* @brief Has clock 2 output divider (register bit field CLKDIV1[OUTDIV2]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV2 (1)
+/* @brief Has clock 3 output divider (register bit field CLKDIV1[OUTDIV3]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV3 (1)
+/* @brief Has clock 4 output divider (register bit field CLKDIV1[OUTDIV4]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV4 (1)
+/* @brief Clock 4 output divider width (width of register bit field CLKDIV1[OUTDIV4]). */
+#define FSL_FEATURE_SIM_DIVIDER_OUTDIV4_WIDTH (4)
+/* @brief Has clock 5 output divider (register bit field CLKDIV1[OUTDIV5]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV5 (0)
+/* @brief Has USB clock divider (register bit field CLKDIV2[USBDIV] and CLKDIV2[USBFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_USBDIV (1)
+/* @brief Has USB FS clock divider (register bit field CLKDIV2[USBFSDIV] and CLKDIV2[USBFSFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_USBFSDIV (0)
+/* @brief Has USB HS clock divider (register bit field CLKDIV2[USBHSDIV] and CLKDIV2[USBHSFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_USBHSDIV (0)
+/* @brief Has PLL/FLL clock divider (register bit field CLKDIV3[PLLFLLDIV] and CLKDIV3[PLLFLLFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_PLLFLLDIV (1)
+/* @brief Has LCDC clock divider (register bit field CLKDIV3[LCDCDIV] and CLKDIV3[LCDCFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_LCDCDIV (0)
+/* @brief Has trace clock divider (register bit field CLKDIV4[TRACEDIV] and CLKDIV4[TRACEFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_TRACEDIV (1)
+/* @brief Has NFC clock divider (register bit field CLKDIV4[NFCDIV] and CLKDIV4[NFCFRAC]). */
+#define FSL_FEATURE_SIM_DIVIDER_HAS_NFCDIV (0)
+/* @brief Has Kinetis family ID (register bit field SDID[FAMILYID]). */
+#define FSL_FEATURE_SIM_SDID_HAS_FAMILYID (1)
+/* @brief Has Kinetis family ID (register bit field SDID[FAMID]). */
+#define FSL_FEATURE_SIM_SDID_HAS_FAMID (1)
+/* @brief Has Kinetis sub-family ID (register bit field SDID[SUBFAMID]). */
+#define FSL_FEATURE_SIM_SDID_HAS_SUBFAMID (1)
+/* @brief Has Kinetis series ID (register bit field SDID[SERIESID]). */
+#define FSL_FEATURE_SIM_SDID_HAS_SERIESID (1)
+/* @brief Has device die ID (register bit field SDID[DIEID]). */
+#define FSL_FEATURE_SIM_SDID_HAS_DIEID (1)
+/* @brief Has system SRAM size specifier (register bit field SDID[SRAMSIZE]). */
+#define FSL_FEATURE_SIM_SDID_HAS_SRAMSIZE (0)
+/* @brief Has flash mode (register bit FCFG1[FLASHDOZE]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_FLASHDOZE (1)
+/* @brief Has flash disable (register bit FCFG1[FLASHDIS]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_FLASHDIS (1)
+/* @brief Has FTFE disable (register bit FCFG1[FTFDIS]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_FTFDIS (0)
+/* @brief Has FlexNVM size specifier (register bit field FCFG1[NVMSIZE]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_NVMSIZE (1)
+/* @brief Has EEPROM size specifier (register bit field FCFG1[EESIZE]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_EESIZE (1)
+/* @brief Has FlexNVM partition (register bit field FCFG1[DEPART]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_DEPART (1)
+/* @brief Maximum flash address block 0 address specifier (register bit field FCFG2[MAXADDR0]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR0 (1)
+/* @brief Maximum flash address block 1 address specifier (register bit field FCFG2[MAXADDR1]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR1 (1)
+/* @brief Maximum flash address block 0 or 1 address specifier (register bit field FCFG2[MAXADDR01]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR01 (0)
+/* @brief Maximum flash address block 2 or 3 address specifier (register bit field FCFG2[MAXADDR23]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR23 (0)
+/* @brief Has program flash availability specifier (register bit FCFG2[PFLSH]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_PFLSH (1)
+/* @brief Has program flash swapping (register bit FCFG2[SWAPPFLSH]). */
+#define FSL_FEATURE_SIM_FCFG_HAS_PFLSH_SWAP (1)
+/* @brief Has miscellanious control register (register MCR). */
+#define FSL_FEATURE_SIM_HAS_MISC_CONTROLS (0)
+/* @brief Has COP watchdog (registers COPC and SRVCOP). */
+#define FSL_FEATURE_SIM_HAS_COP_WATCHDOG (0)
+/* @brief Has COP watchdog stop (register bits COPC[COPSTPEN], COPC[COPDBGEN] and COPC[COPCLKSEL]). */
+#define FSL_FEATURE_SIM_HAS_COP_STOP (0)
+/* @brief Has LLWU clock gate bit (e.g SIM_SCGC4). */
+#define FSL_FEATURE_SIM_HAS_SCGC_LLWU (0)
+
+/* SMC module features */
+
+/* @brief Has partial stop option (register bit STOPCTRL[PSTOPO]). */
+#define FSL_FEATURE_SMC_HAS_PSTOPO (1)
+/* @brief Has LPO power option (register bit STOPCTRL[LPOPO]). */
+#define FSL_FEATURE_SMC_HAS_LPOPO (0)
+/* @brief Has POR power option (register bit STOPCTRL[PORPO] or VLLSCTRL[PORPO]). */
+#define FSL_FEATURE_SMC_HAS_PORPO (1)
+/* @brief Has low power wakeup on interrupt (register bit PMCTRL[LPWUI]). */
+#define FSL_FEATURE_SMC_HAS_LPWUI (0)
+/* @brief Has LLS or VLLS mode control (register bit STOPCTRL[LLSM]). */
+#define FSL_FEATURE_SMC_HAS_LLS_SUBMODE (1)
+/* @brief Has VLLS mode control (register bit VLLSCTRL[VLLSM]). */
+#define FSL_FEATURE_SMC_USE_VLLSCTRL_REG (0)
+/* @brief Has VLLS mode control (register bit STOPCTRL[VLLSM]). */
+#define FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM (0)
+/* @brief Has RAM partition 2 power option (register bit STOPCTRL[RAM2PO]). */
+#define FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION (1)
+/* @brief Has high speed run mode (register bit PMPROT[AHSRUN]). */
+#define FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE (1)
+/* @brief Has low leakage stop mode (register bit PMPROT[ALLS]). */
+#define FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE (1)
+/* @brief Has very low leakage stop mode (register bit PMPROT[AVLLS]). */
+#define FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE (1)
+/* @brief Has stop submode. */
+#define FSL_FEATURE_SMC_HAS_SUB_STOP_MODE (1)
+/* @brief Has stop submode 0(VLLS0). */
+#define FSL_FEATURE_SMC_HAS_STOP_SUBMODE0 (1)
+/* @brief Has stop submode 2(VLLS2). */
+#define FSL_FEATURE_SMC_HAS_STOP_SUBMODE2 (1)
+/* @brief Has SMC_PARAM. */
+#define FSL_FEATURE_SMC_HAS_PARAM (0)
+/* @brief Has SMC_VERID. */
+#define FSL_FEATURE_SMC_HAS_VERID (0)
+/* @brief Has stop abort flag (register bit PMCTRL[STOPA]). */
+#define FSL_FEATURE_SMC_HAS_PMCTRL_STOPA (1)
+/* @brief Has tamper reset (register bit SRS[TAMPER]). */
+#define FSL_FEATURE_SMC_HAS_SRS_TAMPER (0)
+/* @brief Has security violation reset (register bit SRS[SECVIO]). */
+#define FSL_FEATURE_SMC_HAS_SRS_SECVIO (0)
+
+/* DSPI module features */
+
+/* @brief Receive/transmit FIFO size in number of items. */
+#define FSL_FEATURE_DSPI_FIFO_SIZEn(x) \
+    ((x) == DSPI0 ? (4) : \
+    ((x) == DSPI1 ? (1) : \
+    ((x) == DSPI2 ? (1) : (-1))))
+/* @brief Maximum transfer data width in bits. */
+#define FSL_FEATURE_DSPI_MAX_DATA_WIDTH (16)
+/* @brief Maximum number of chip select pins. (Reflects the width of register bit field PUSHR[PCS].) */
+#define FSL_FEATURE_DSPI_MAX_CHIP_SELECT_COUNT (6)
+/* @brief Number of chip select pins. */
+#define FSL_FEATURE_DSPI_CHIP_SELECT_COUNT (6)
+/* @brief Has chip select strobe capability on the PCS5 pin. */
+#define FSL_FEATURE_DSPI_HAS_CHIP_SELECT_STROBE (1)
+/* @brief Has separated TXDATA and CMD FIFOs (register SREX). */
+#define FSL_FEATURE_DSPI_HAS_SEPARATE_TXDATA_CMD_FIFO (0)
+/* @brief Has 16-bit data transfer support. */
+#define FSL_FEATURE_DSPI_16BIT_TRANSFERS (1)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_DSPI_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
+
+/* SYSMPU module features */
+
+/* @brief Specifies number of descriptors available. */
+#define FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT (12)
+/* @brief Has process identifier support. */
+#define FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER (1)
+/* @brief Total number of MPU slave. */
+#define FSL_FEATURE_SYSMPU_SLAVE_COUNT (5)
+/* @brief Total number of MPU master. */
+#define FSL_FEATURE_SYSMPU_MASTER_COUNT (7)
+
+/* SysTick module features */
+
+/* @brief Systick has external reference clock. */
+#define FSL_FEATURE_SYSTICK_HAS_EXT_REF (0)
+/* @brief Systick external reference clock is core clock divided by this value. */
+#define FSL_FEATURE_SYSTICK_EXT_REF_CORE_DIV (0)
+
+/* TPM module features */
+
+/* @brief Bus clock is the source clock for the module. */
+#define FSL_FEATURE_TPM_BUS_CLOCK (0)
+/* @brief Number of channels. */
+#define FSL_FEATURE_TPM_CHANNEL_COUNTn(x) (2)
+/* @brief Has counter reset by the selected input capture event (register bits C0SC[ICRST], C1SC[ICRST], ...). */
+#define FSL_FEATURE_TPM_HAS_COUNTER_RESET_BY_CAPTURE_EVENT (0)
+/* @brief Has TPM_PARAM. */
+#define FSL_FEATURE_TPM_HAS_PARAM (0)
+/* @brief Has TPM_VERID. */
+#define FSL_FEATURE_TPM_HAS_VERID (0)
+/* @brief Has TPM_GLOBAL. */
+#define FSL_FEATURE_TPM_HAS_GLOBAL (0)
+/* @brief Has TPM_TRIG. */
+#define FSL_FEATURE_TPM_HAS_TRIG (0)
+/* @brief Has counter pause on trigger. */
+#define FSL_FEATURE_TPM_HAS_PAUSE_COUNTER_ON_TRIGGER (1)
+/* @brief Has external trigger selection. */
+#define FSL_FEATURE_TPM_HAS_EXTERNAL_TRIGGER_SELECTION (1)
+/* @brief Has TPM_COMBINE register. */
+#define FSL_FEATURE_TPM_HAS_COMBINE (1)
+/* @brief Whether COMBINE register has effect. */
+#define FSL_FEATURE_TPM_COMBINE_HAS_EFFECTn(x) (1)
+/* @brief Has TPM_POL. */
+#define FSL_FEATURE_TPM_HAS_POL (1)
+/* @brief Has TPM_FILTER register. */
+#define FSL_FEATURE_TPM_HAS_FILTER (1)
+/* @brief Whether FILTER register has effect. */
+#define FSL_FEATURE_TPM_FILTER_HAS_EFFECTn(x) (1)
+/* @brief Has TPM_QDCTRL register. */
+#define FSL_FEATURE_TPM_HAS_QDCTRL (1)
+/* @brief Whether QDCTRL register has effect. */
+#define FSL_FEATURE_TPM_QDCTRL_HAS_EFFECTn(x) (1)
+
+/* TSI module features */
+
+/* @brief TSI module version. */
+#define FSL_FEATURE_TSI_VERSION (4)
+/* @brief Has end-of-scan DMA transfer request enable (register bit GENCS[EOSDMEO]). */
+#define FSL_FEATURE_TSI_HAS_END_OF_SCAN_DMA_ENABLE (1)
+/* @brief Number of TSI channels. */
+#define FSL_FEATURE_TSI_CHANNEL_COUNT (16)
+
+/* UART module features */
+
+/* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */
+#define FSL_FEATURE_UART_HAS_IRQ_EXTENDED_FUNCTIONS (1)
+/* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */
+#define FSL_FEATURE_UART_HAS_LOW_POWER_UART_SUPPORT (0)
+/* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */
+#define FSL_FEATURE_UART_HAS_EXTENDED_DATA_REGISTER_FLAGS (1)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_UART_HAS_FIFO (1)
+/* @brief Hardware flow control (RTS, CTS) is supported. */
+#define FSL_FEATURE_UART_HAS_MODEM_SUPPORT (1)
+/* @brief Infrared (modulation) is supported. */
+#define FSL_FEATURE_UART_HAS_IR_SUPPORT (1)
+/* @brief 2 bits long stop bit is available. */
+#define FSL_FEATURE_UART_HAS_STOP_BIT_CONFIG_SUPPORT (1)
+/* @brief If 10-bit mode is supported. */
+#define FSL_FEATURE_UART_HAS_10BIT_DATA_SUPPORT (1)
+/* @brief Baud rate fine adjustment is available. */
+#define FSL_FEATURE_UART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (1)
+/* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */
+#define FSL_FEATURE_UART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (0)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_UART_HAS_RX_RESYNC_SUPPORT (0)
+/* @brief Baud rate oversampling is available. */
+#define FSL_FEATURE_UART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (0)
+/* @brief Peripheral type. */
+#define FSL_FEATURE_UART_IS_SCI (0)
+/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
+#define FSL_FEATURE_UART_FIFO_SIZEn(x) \
+    ((x) == UART0 ? (8) : \
+    ((x) == UART1 ? (8) : \
+    ((x) == UART2 ? (1) : \
+    ((x) == UART3 ? (1) : \
+    ((x) == UART4 ? (1) : (-1))))))
+/* @brief Maximal data width without parity bit. */
+#define FSL_FEATURE_UART_MAX_DATA_WIDTH_WITH_NO_PARITY (9)
+/* @brief Maximal data width with parity bit. */
+#define FSL_FEATURE_UART_MAX_DATA_WIDTH_WITH_PARITY (10)
+/* @brief Supports two match addresses to filter incoming frames. */
+#define FSL_FEATURE_UART_HAS_ADDRESS_MATCHING (1)
+/* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */
+#define FSL_FEATURE_UART_HAS_DMA_ENABLE (0)
+/* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */
+#define FSL_FEATURE_UART_HAS_DMA_SELECT (1)
+/* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */
+#define FSL_FEATURE_UART_HAS_BIT_ORDER_SELECT (1)
+/* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */
+#define FSL_FEATURE_UART_HAS_SMART_CARD_SUPPORT (1)
+/* @brief Has improved smart card (ISO7816 protocol) support. */
+#define FSL_FEATURE_UART_HAS_IMPROVED_SMART_CARD_SUPPORT (1)
+/* @brief Has local operation network (CEA709.1-B protocol) support. */
+#define FSL_FEATURE_UART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0)
+/* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */
+#define FSL_FEATURE_UART_HAS_32BIT_REGISTERS (0)
+/* @brief Lin break detect available (has bit BDH[LBKDIE]). */
+#define FSL_FEATURE_UART_HAS_LIN_BREAK_DETECT (1)
+/* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */
+#define FSL_FEATURE_UART_HAS_WAIT_MODE_OPERATION (1)
+/* @brief Has separate DMA RX and TX requests. */
+#define FSL_FEATURE_UART_HAS_SEPARATE_DMA_RX_TX_REQn(x) \
+    ((x) == UART0 ? (1) : \
+    ((x) == UART1 ? (1) : \
+    ((x) == UART2 ? (1) : \
+    ((x) == UART3 ? (1) : \
+    ((x) == UART4 ? (0) : (-1))))))
+
+/* USB module features */
+
+/* @brief KHCI module instance count */
+#define FSL_FEATURE_USB_KHCI_COUNT (1)
+/* @brief HOST mode enabled */
+#define FSL_FEATURE_USB_KHCI_HOST_ENABLED (1)
+/* @brief OTG mode enabled */
+#define FSL_FEATURE_USB_KHCI_OTG_ENABLED (1)
+/* @brief Size of the USB dedicated RAM */
+#define FSL_FEATURE_USB_KHCI_USB_RAM (0)
+/* @brief Has KEEP_ALIVE_CTRL register */
+#define FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED (0)
+/* @brief Has the Dynamic SOF threshold compare support */
+#define FSL_FEATURE_USB_KHCI_DYNAMIC_SOF_THRESHOLD_COMPARE_ENABLED (0)
+/* @brief Has the VBUS detect support */
+#define FSL_FEATURE_USB_KHCI_VBUS_DETECT_ENABLED (0)
+/* @brief Has the IRC48M module clock support */
+#define FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED (1)
+/* @brief Number of endpoints supported */
+#define FSL_FEATURE_USB_ENDPT_COUNT (16)
+
+/* USBHS module features */
+
+/* @brief EHCI module instance count */
+#define FSL_FEATURE_USBHS_EHCI_COUNT (1)
+/* @brief Number of endpoints supported */
+#define FSL_FEATURE_USBHS_ENDPT_COUNT (8)
+
+/* VREF module features */
+
+/* @brief Has chop oscillator (bit TRM[CHOPEN]) */
+#define FSL_FEATURE_VREF_HAS_CHOP_OSC (1)
+/* @brief Has second order curvature compensation (bit SC[ICOMPEN]) */
+#define FSL_FEATURE_VREF_HAS_COMPENSATION (1)
+/* @brief If high/low buffer mode supported */
+#define FSL_FEATURE_VREF_MODE_LV_TYPE (1)
+/* @brief Module has also low reference (registers VREFL/VREFH) */
+#define FSL_FEATURE_VREF_HAS_LOW_REFERENCE (0)
+/* @brief Has VREF_TRM4. */
+#define FSL_FEATURE_VREF_HAS_TRM4 (0)
+
+/* WDOG module features */
+
+/* @brief Watchdog is available. */
+#define FSL_FEATURE_WDOG_HAS_WATCHDOG (1)
+/* @brief Has Wait mode support. */
+#define FSL_FEATURE_WDOG_HAS_WAITEN (1)
+
+#endif /* _MK66F18_FEATURES_H_ */
+