Diff: TARGET_K64F/TOOLCHAIN_IAR/fsl_sdhc.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

diff -r e95d10626187 -r 3a7713b1edbc TARGET_K64F/TOOLCHAIN_IAR/fsl_sdhc.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TOOLCHAIN_IAR/fsl_sdhc.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,1087 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_SDHC_H_
+#define _FSL_SDHC_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup sdhc
+ * @{
+ */
+
+/******************************************************************************
+ * Definitions.
+ *****************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief Driver version 2.1.2. */
+#define FSL_SDHC_DRIVER_VERSION (MAKE_VERSION(2U, 1U, 2U))
+/*@}*/
+
+/*! @brief Maximum block count can be set one time */
+#define SDHC_MAX_BLOCK_COUNT (SDHC_BLKATTR_BLKCNT_MASK >> SDHC_BLKATTR_BLKCNT_SHIFT)
+
+/*! @brief SDHC status */
+enum _sdhc_status
+{
+    kStatus_SDHC_BusyTransferring = MAKE_STATUS(kStatusGroup_SDHC, 0U),            /*!< Transfer is on-going */
+    kStatus_SDHC_PrepareAdmaDescriptorFailed = MAKE_STATUS(kStatusGroup_SDHC, 1U), /*!< Set DMA descriptor failed */
+    kStatus_SDHC_SendCommandFailed = MAKE_STATUS(kStatusGroup_SDHC, 2U),           /*!< Send command failed */
+    kStatus_SDHC_TransferDataFailed = MAKE_STATUS(kStatusGroup_SDHC, 3U),          /*!< Transfer data failed */
+};
+
+/*! @brief Host controller capabilities flag mask */
+enum _sdhc_capability_flag
+{
+    kSDHC_SupportAdmaFlag = SDHC_HTCAPBLT_ADMAS_MASK,        /*!< Support ADMA */
+    kSDHC_SupportHighSpeedFlag = SDHC_HTCAPBLT_HSS_MASK,     /*!< Support high-speed */
+    kSDHC_SupportDmaFlag = SDHC_HTCAPBLT_DMAS_MASK,          /*!< Support DMA */
+    kSDHC_SupportSuspendResumeFlag = SDHC_HTCAPBLT_SRS_MASK, /*!< Support suspend/resume */
+    kSDHC_SupportV330Flag = SDHC_HTCAPBLT_VS33_MASK,         /*!< Support voltage 3.3V */
+#if defined FSL_FEATURE_SDHC_HAS_V300_SUPPORT && FSL_FEATURE_SDHC_HAS_V300_SUPPORT
+    kSDHC_SupportV300Flag = SDHC_HTCAPBLT_VS30_MASK, /*!< Support voltage 3.0V */
+#endif
+#if defined FSL_FEATURE_SDHC_HAS_V180_SUPPORT && FSL_FEATURE_SDHC_HAS_V180_SUPPORT
+    kSDHC_SupportV180Flag = SDHC_HTCAPBLT_VS18_MASK, /*!< Support voltage 1.8V */
+#endif
+    /* Put additional two flags in HTCAPBLT_MBL's position. */
+    kSDHC_Support4BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 0U), /*!< Support 4 bit mode */
+    kSDHC_Support8BitFlag = (SDHC_HTCAPBLT_MBL_SHIFT << 1U), /*!< Support 8 bit mode */
+};
+
+/*! @brief Wakeup event mask */
+enum _sdhc_wakeup_event
+{
+    kSDHC_WakeupEventOnCardInt = SDHC_PROCTL_WECINT_MASK,    /*!< Wakeup on card interrupt */
+    kSDHC_WakeupEventOnCardInsert = SDHC_PROCTL_WECINS_MASK, /*!< Wakeup on card insertion */
+    kSDHC_WakeupEventOnCardRemove = SDHC_PROCTL_WECRM_MASK,  /*!< Wakeup on card removal */
+
+    kSDHC_WakeupEventsAll = (kSDHC_WakeupEventOnCardInt | kSDHC_WakeupEventOnCardInsert |
+                             kSDHC_WakeupEventOnCardRemove), /*!< All wakeup events */
+};
+
+/*! @brief Reset type mask */
+enum _sdhc_reset
+{
+    kSDHC_ResetAll = SDHC_SYSCTL_RSTA_MASK,     /*!< Reset all except card detection */
+    kSDHC_ResetCommand = SDHC_SYSCTL_RSTC_MASK, /*!< Reset command line */
+    kSDHC_ResetData = SDHC_SYSCTL_RSTD_MASK,    /*!< Reset data line */
+
+    kSDHC_ResetsAll = (kSDHC_ResetAll | kSDHC_ResetCommand | kSDHC_ResetData), /*!< All reset types */
+};
+
+/*! @brief Transfer flag mask */
+enum _sdhc_transfer_flag
+{
+    kSDHC_EnableDmaFlag = SDHC_XFERTYP_DMAEN_MASK, /*!< Enable DMA */
+
+    kSDHC_CommandTypeSuspendFlag = (SDHC_XFERTYP_CMDTYP(1U)), /*!< Suspend command */
+    kSDHC_CommandTypeResumeFlag = (SDHC_XFERTYP_CMDTYP(2U)),  /*!< Resume command */
+    kSDHC_CommandTypeAbortFlag = (SDHC_XFERTYP_CMDTYP(3U)),   /*!< Abort command */
+
+    kSDHC_EnableBlockCountFlag = SDHC_XFERTYP_BCEN_MASK,      /*!< Enable block count */
+    kSDHC_EnableAutoCommand12Flag = SDHC_XFERTYP_AC12EN_MASK, /*!< Enable auto CMD12 */
+    kSDHC_DataReadFlag = SDHC_XFERTYP_DTDSEL_MASK,            /*!< Enable data read */
+    kSDHC_MultipleBlockFlag = SDHC_XFERTYP_MSBSEL_MASK,       /*!< Multiple block data read/write */
+
+    kSDHC_ResponseLength136Flag = SDHC_XFERTYP_RSPTYP(1U),    /*!< 136 bit response length */
+    kSDHC_ResponseLength48Flag = SDHC_XFERTYP_RSPTYP(2U),     /*!< 48 bit response length */
+    kSDHC_ResponseLength48BusyFlag = SDHC_XFERTYP_RSPTYP(3U), /*!< 48 bit response length with busy status */
+
+    kSDHC_EnableCrcCheckFlag = SDHC_XFERTYP_CCCEN_MASK,   /*!< Enable CRC check */
+    kSDHC_EnableIndexCheckFlag = SDHC_XFERTYP_CICEN_MASK, /*!< Enable index check */
+    kSDHC_DataPresentFlag = SDHC_XFERTYP_DPSEL_MASK,      /*!< Data present flag */
+};
+
+/*! @brief Present status flag mask */
+enum _sdhc_present_status_flag
+{
+    kSDHC_CommandInhibitFlag = SDHC_PRSSTAT_CIHB_MASK,     /*!< Command inhibit */
+    kSDHC_DataInhibitFlag = SDHC_PRSSTAT_CDIHB_MASK,       /*!< Data inhibit */
+    kSDHC_DataLineActiveFlag = SDHC_PRSSTAT_DLA_MASK,      /*!< Data line active */
+    kSDHC_SdClockStableFlag = SDHC_PRSSTAT_SDSTB_MASK,     /*!< SD bus clock stable */
+    kSDHC_WriteTransferActiveFlag = SDHC_PRSSTAT_WTA_MASK, /*!< Write transfer active */
+    kSDHC_ReadTransferActiveFlag = SDHC_PRSSTAT_RTA_MASK,  /*!< Read transfer active */
+    kSDHC_BufferWriteEnableFlag = SDHC_PRSSTAT_BWEN_MASK,  /*!< Buffer write enable */
+    kSDHC_BufferReadEnableFlag = SDHC_PRSSTAT_BREN_MASK,   /*!< Buffer read enable */
+    kSDHC_CardInsertedFlag = SDHC_PRSSTAT_CINS_MASK,       /*!< Card inserted */
+    kSDHC_CommandLineLevelFlag = SDHC_PRSSTAT_CLSL_MASK,   /*!< Command line signal level */
+    kSDHC_Data0LineLevelFlag = (1U << 24U),                /*!< Data0 line signal level */
+    kSDHC_Data1LineLevelFlag = (1U << 25U),                /*!< Data1 line signal level */
+    kSDHC_Data2LineLevelFlag = (1U << 26U),                /*!< Data2 line signal level */
+    kSDHC_Data3LineLevelFlag = (1U << 27U),                /*!< Data3 line signal level */
+    kSDHC_Data4LineLevelFlag = (1U << 28U),                /*!< Data4 line signal level */
+    kSDHC_Data5LineLevelFlag = (1U << 29U),                /*!< Data5 line signal level */
+    kSDHC_Data6LineLevelFlag = (1U << 30U),                /*!< Data6 line signal level */
+    kSDHC_Data7LineLevelFlag = (1U << 31U),                /*!< Data7 line signal level */
+};
+
+/*! @brief Interrupt status flag mask */
+enum _sdhc_interrupt_status_flag
+{
+    kSDHC_CommandCompleteFlag = SDHC_IRQSTAT_CC_MASK,       /*!< Command complete */
+    kSDHC_DataCompleteFlag = SDHC_IRQSTAT_TC_MASK,          /*!< Data complete */
+    kSDHC_BlockGapEventFlag = SDHC_IRQSTAT_BGE_MASK,        /*!< Block gap event */
+    kSDHC_DmaCompleteFlag = SDHC_IRQSTAT_DINT_MASK,         /*!< DMA interrupt */
+    kSDHC_BufferWriteReadyFlag = SDHC_IRQSTAT_BWR_MASK,     /*!< Buffer write ready */
+    kSDHC_BufferReadReadyFlag = SDHC_IRQSTAT_BRR_MASK,      /*!< Buffer read ready */
+    kSDHC_CardInsertionFlag = SDHC_IRQSTAT_CINS_MASK,       /*!< Card inserted */
+    kSDHC_CardRemovalFlag = SDHC_IRQSTAT_CRM_MASK,          /*!< Card removed */
+    kSDHC_CardInterruptFlag = SDHC_IRQSTAT_CINT_MASK,       /*!< Card interrupt */
+    kSDHC_CommandTimeoutFlag = SDHC_IRQSTAT_CTOE_MASK,      /*!< Command timeout error */
+    kSDHC_CommandCrcErrorFlag = SDHC_IRQSTAT_CCE_MASK,      /*!< Command CRC error */
+    kSDHC_CommandEndBitErrorFlag = SDHC_IRQSTAT_CEBE_MASK,  /*!< Command end bit error */
+    kSDHC_CommandIndexErrorFlag = SDHC_IRQSTAT_CIE_MASK,    /*!< Command index error */
+    kSDHC_DataTimeoutFlag = SDHC_IRQSTAT_DTOE_MASK,         /*!< Data timeout error */
+    kSDHC_DataCrcErrorFlag = SDHC_IRQSTAT_DCE_MASK,         /*!< Data CRC error */
+    kSDHC_DataEndBitErrorFlag = SDHC_IRQSTAT_DEBE_MASK,     /*!< Data end bit error */
+    kSDHC_AutoCommand12ErrorFlag = SDHC_IRQSTAT_AC12E_MASK, /*!< Auto CMD12 error */
+    kSDHC_DmaErrorFlag = SDHC_IRQSTAT_DMAE_MASK,            /*!< DMA error */
+
+    kSDHC_CommandErrorFlag = (kSDHC_CommandTimeoutFlag | kSDHC_CommandCrcErrorFlag | kSDHC_CommandEndBitErrorFlag |
+                              kSDHC_CommandIndexErrorFlag), /*!< Command error */
+    kSDHC_DataErrorFlag = (kSDHC_DataTimeoutFlag | kSDHC_DataCrcErrorFlag | kSDHC_DataEndBitErrorFlag |
+                           kSDHC_AutoCommand12ErrorFlag),                                  /*!< Data error */
+    kSDHC_ErrorFlag = (kSDHC_CommandErrorFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< All error */
+    kSDHC_DataFlag = (kSDHC_DataCompleteFlag | kSDHC_DmaCompleteFlag | kSDHC_BufferWriteReadyFlag |
+                      kSDHC_BufferReadReadyFlag | kSDHC_DataErrorFlag | kSDHC_DmaErrorFlag), /*!< Data interrupts */
+    kSDHC_CommandFlag = (kSDHC_CommandErrorFlag | kSDHC_CommandCompleteFlag),                /*!< Command interrupts */
+    kSDHC_CardDetectFlag = (kSDHC_CardInsertionFlag | kSDHC_CardRemovalFlag), /*!< Card detection interrupts */
+
+    kSDHC_AllInterruptFlags = (kSDHC_BlockGapEventFlag | kSDHC_CardInterruptFlag | kSDHC_CommandFlag | kSDHC_DataFlag |
+                               kSDHC_ErrorFlag), /*!< All flags mask */
+};
+
+/*! @brief Auto CMD12 error status flag mask */
+enum _sdhc_auto_command12_error_status_flag
+{
+    kSDHC_AutoCommand12NotExecutedFlag = SDHC_AC12ERR_AC12NE_MASK,  /*!< Not executed error */
+    kSDHC_AutoCommand12TimeoutFlag = SDHC_AC12ERR_AC12TOE_MASK,     /*!< Timeout error */
+    kSDHC_AutoCommand12EndBitErrorFlag = SDHC_AC12ERR_AC12EBE_MASK, /*!< End bit error */
+    kSDHC_AutoCommand12CrcErrorFlag = SDHC_AC12ERR_AC12CE_MASK,     /*!< CRC error */
+    kSDHC_AutoCommand12IndexErrorFlag = SDHC_AC12ERR_AC12IE_MASK,   /*!< Index error */
+    kSDHC_AutoCommand12NotIssuedFlag = SDHC_AC12ERR_CNIBAC12E_MASK, /*!< Not issued error */
+};
+
+/*! @brief ADMA error status flag mask */
+enum _sdhc_adma_error_status_flag
+{
+    kSDHC_AdmaLenghMismatchFlag = SDHC_ADMAES_ADMALME_MASK,   /*!< Length mismatch error */
+    kSDHC_AdmaDescriptorErrorFlag = SDHC_ADMAES_ADMADCE_MASK, /*!< Descriptor error */
+};
+
+/*!
+ * @brief ADMA error state
+ *
+ * This state is the detail state when ADMA error has occurred.
+ */
+typedef enum _sdhc_adma_error_state
+{
+    kSDHC_AdmaErrorStateStopDma = 0x00U,         /*!< Stop DMA */
+    kSDHC_AdmaErrorStateFetchDescriptor = 0x01U, /*!< Fetch descriptor */
+    kSDHC_AdmaErrorStateChangeAddress = 0x02U,   /*!< Change address */
+    kSDHC_AdmaErrorStateTransferData = 0x03U,    /*!< Transfer data */
+} sdhc_adma_error_state_t;
+
+/*! @brief Force event mask */
+enum _sdhc_force_event
+{
+    kSDHC_ForceEventAutoCommand12NotExecuted = SDHC_FEVT_AC12NE_MASK,  /*!< Auto CMD12 not executed error */
+    kSDHC_ForceEventAutoCommand12Timeout = SDHC_FEVT_AC12TOE_MASK,     /*!< Auto CMD12 timeout error */
+    kSDHC_ForceEventAutoCommand12CrcError = SDHC_FEVT_AC12CE_MASK,     /*!< Auto CMD12 CRC error */
+    kSDHC_ForceEventEndBitError = SDHC_FEVT_AC12EBE_MASK,              /*!< Auto CMD12 end bit error */
+    kSDHC_ForceEventAutoCommand12IndexError = SDHC_FEVT_AC12IE_MASK,   /*!< Auto CMD12 index error */
+    kSDHC_ForceEventAutoCommand12NotIssued = SDHC_FEVT_CNIBAC12E_MASK, /*!< Auto CMD12 not issued error */
+    kSDHC_ForceEventCommandTimeout = SDHC_FEVT_CTOE_MASK,              /*!< Command timeout error */
+    kSDHC_ForceEventCommandCrcError = SDHC_FEVT_CCE_MASK,              /*!< Command CRC error */
+    kSDHC_ForceEventCommandEndBitError = SDHC_FEVT_CEBE_MASK,          /*!< Command end bit error */
+    kSDHC_ForceEventCommandIndexError = SDHC_FEVT_CIE_MASK,            /*!< Command index error */
+    kSDHC_ForceEventDataTimeout = SDHC_FEVT_DTOE_MASK,                 /*!< Data timeout error */
+    kSDHC_ForceEventDataCrcError = SDHC_FEVT_DCE_MASK,                 /*!< Data CRC error */
+    kSDHC_ForceEventDataEndBitError = SDHC_FEVT_DEBE_MASK,             /*!< Data end bit error */
+    kSDHC_ForceEventAutoCommand12Error = SDHC_FEVT_AC12E_MASK,         /*!< Auto CMD12 error */
+    kSDHC_ForceEventCardInt = SDHC_FEVT_CINT_MASK,                     /*!< Card interrupt */
+    kSDHC_ForceEventDmaError = SDHC_FEVT_DMAE_MASK,                    /*!< Dma error */
+
+    kSDHC_ForceEventsAll =
+        (kSDHC_ForceEventAutoCommand12NotExecuted | kSDHC_ForceEventAutoCommand12Timeout |
+         kSDHC_ForceEventAutoCommand12CrcError | kSDHC_ForceEventEndBitError | kSDHC_ForceEventAutoCommand12IndexError |
+         kSDHC_ForceEventAutoCommand12NotIssued | kSDHC_ForceEventCommandTimeout | kSDHC_ForceEventCommandCrcError |
+         kSDHC_ForceEventCommandEndBitError | kSDHC_ForceEventCommandIndexError | kSDHC_ForceEventDataTimeout |
+         kSDHC_ForceEventDataCrcError | kSDHC_ForceEventDataEndBitError | kSDHC_ForceEventAutoCommand12Error |
+         kSDHC_ForceEventCardInt | kSDHC_ForceEventDmaError), /*!< All force event flags mask */
+};
+
+/*! @brief Data transfer width */
+typedef enum _sdhc_data_bus_width
+{
+    kSDHC_DataBusWidth1Bit = 0U, /*!< 1-bit mode */
+    kSDHC_DataBusWidth4Bit = 1U, /*!< 4-bit mode */
+    kSDHC_DataBusWidth8Bit = 2U, /*!< 8-bit mode */
+} sdhc_data_bus_width_t;
+
+/*! @brief Endian mode */
+typedef enum _sdhc_endian_mode
+{
+    kSDHC_EndianModeBig = 0U,         /*!< Big endian mode */
+    kSDHC_EndianModeHalfWordBig = 1U, /*!< Half word big endian mode */
+    kSDHC_EndianModeLittle = 2U,      /*!< Little endian mode */
+} sdhc_endian_mode_t;
+
+/*! @brief DMA mode */
+typedef enum _sdhc_dma_mode
+{
+    kSDHC_DmaModeNo = 0U,    /*!< No DMA */
+    kSDHC_DmaModeAdma1 = 1U, /*!< ADMA1 is selected */
+    kSDHC_DmaModeAdma2 = 2U, /*!< ADMA2 is selected */
+} sdhc_dma_mode_t;
+
+/*! @brief SDIO control flag mask */
+enum _sdhc_sdio_control_flag
+{
+    kSDHC_StopAtBlockGapFlag = 0x01,       /*!< Stop at block gap */
+    kSDHC_ReadWaitControlFlag = 0x02,      /*!< Read wait control */
+    kSDHC_InterruptAtBlockGapFlag = 0x04,  /*!< Interrupt at block gap */
+    kSDHC_ExactBlockNumberReadFlag = 0x08, /*!< Exact block number read */
+};
+
+/*! @brief MMC card boot mode */
+typedef enum _sdhc_boot_mode
+{
+    kSDHC_BootModeNormal = 0U,      /*!< Normal boot */
+    kSDHC_BootModeAlternative = 1U, /*!< Alternative boot */
+} sdhc_boot_mode_t;
+
+/*! @brief The command type */
+typedef enum _sdhc_command_type
+{
+    kSDHC_CommandTypeNormal = 0U,  /*!< Normal command */
+    kSDHC_CommandTypeSuspend = 1U, /*!< Suspend command */
+    kSDHC_CommandTypeResume = 2U,  /*!< Resume command */
+    kSDHC_CommandTypeAbort = 3U,   /*!< Abort command */
+} sdhc_command_type_t;
+
+/*!
+ * @brief The command response type.
+ *
+ * Define the command response type from card to host controller.
+ */
+typedef enum _sdhc_response_type
+{
+    kSDHC_ResponseTypeNone = 0U, /*!< Response type: none */
+    kSDHC_ResponseTypeR1 = 1U,   /*!< Response type: R1 */
+    kSDHC_ResponseTypeR1b = 2U,  /*!< Response type: R1b */
+    kSDHC_ResponseTypeR2 = 3U,   /*!< Response type: R2 */
+    kSDHC_ResponseTypeR3 = 4U,   /*!< Response type: R3 */
+    kSDHC_ResponseTypeR4 = 5U,   /*!< Response type: R4 */
+    kSDHC_ResponseTypeR5 = 6U,   /*!< Response type: R5 */
+    kSDHC_ResponseTypeR5b = 7U,  /*!< Response type: R5b */
+    kSDHC_ResponseTypeR6 = 8U,   /*!< Response type: R6 */
+    kSDHC_ResponseTypeR7 = 9U,   /*!< Response type: R7 */
+} sdhc_response_type_t;
+
+/*! @brief The alignment size for ADDRESS filed in ADMA1's descriptor */
+#define SDHC_ADMA1_ADDRESS_ALIGN (4096U)
+/*! @brief The alignment size for LENGTH field in ADMA1's descriptor */
+#define SDHC_ADMA1_LENGTH_ALIGN (4096U)
+/*! @brief The alignment size for ADDRESS field in ADMA2's descriptor */
+#define SDHC_ADMA2_ADDRESS_ALIGN (4U)
+/*! @brief The alignment size for LENGTH filed in ADMA2's descriptor */
+#define SDHC_ADMA2_LENGTH_ALIGN (4U)
+
+/* ADMA1 descriptor table
+ * |------------------------|---------|--------------------------|
+ * | Address/page field     |Reserved |         Attribute        |
+ * |------------------------|---------|--------------------------|
+ * |31                    12|11      6|05  |04  |03|02 |01 |00   |
+ * |------------------------|---------|----|----|--|---|---|-----|
+ * | address or data length | 000000  |Act2|Act1| 0|Int|End|Valid|
+ * |------------------------|---------|----|----|--|---|---|-----|
+ *
+ *
+ * |------|------|-----------------|-------|-------------|
+ * | Act2 | Act1 |     Comment     | 31-28 | 27 - 12     |
+ * |------|------|-----------------|---------------------|
+ * |   0  |   0  | No op           | Don't care          |
+ * |------|------|-----------------|-------|-------------|
+ * |   0  |   1  | Set data length |  0000 | Data Length |
+ * |------|------|-----------------|-------|-------------|
+ * |   1  |   0  | Transfer data   | Data address        |
+ * |------|------|-----------------|---------------------|
+ * |   1  |   1  | Link descriptor | Descriptor address  |
+ * |------|------|-----------------|---------------------|
+ */
+/*! @brief The bit shift for ADDRESS filed in ADMA1's descriptor */
+#define SDHC_ADMA1_DESCRIPTOR_ADDRESS_SHIFT (12U)
+/*! @brief The bit mask for ADDRESS field in ADMA1's descriptor */
+#define SDHC_ADMA1_DESCRIPTOR_ADDRESS_MASK (0xFFFFFU)
+/*! @brief The bit shift for LENGTH filed in ADMA1's descriptor */
+#define SDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT (12U)
+/*! @brief The mask for LENGTH field in ADMA1's descriptor */
+#define SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
+/*! @brief The maximum value of LENGTH filed in ADMA1's descriptor */
+#define SDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA1_DESCRIPTOR_LENGTH_MASK + 1U)
+
+/*! @brief The mask for the control/status field in ADMA1 descriptor */
+enum _sdhc_adma1_descriptor_flag
+{
+    kSDHC_Adma1DescriptorValidFlag = (1U << 0U),                     /*!< Valid flag */
+    kSDHC_Adma1DescriptorEndFlag = (1U << 1U),                       /*!< End flag */
+    kSDHC_Adma1DescriptorInterrupFlag = (1U << 2U),                  /*!< Interrupt flag */
+    kSDHC_Adma1DescriptorActivity1Flag = (1U << 4U),                 /*!< Activity 1 flag */
+    kSDHC_Adma1DescriptorActivity2Flag = (1U << 5U),                 /*!< Activity 2 flag */
+    kSDHC_Adma1DescriptorTypeNop = (kSDHC_Adma1DescriptorValidFlag), /*!< No operation */
+    kSDHC_Adma1DescriptorTypeTransfer =
+        (kSDHC_Adma1DescriptorActivity2Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Transfer data */
+    kSDHC_Adma1DescriptorTypeLink = (kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorActivity2Flag |
+                                     kSDHC_Adma1DescriptorValidFlag), /*!< Link descriptor */
+    kSDHC_Adma1DescriptorTypeSetLength =
+        (kSDHC_Adma1DescriptorActivity1Flag | kSDHC_Adma1DescriptorValidFlag), /*!< Set data length */
+};
+
+/* ADMA2 descriptor table
+ * |----------------|---------------|-------------|--------------------------|
+ * | Address field  |     Length    | Reserved    |         Attribute        |
+ * |----------------|---------------|-------------|--------------------------|
+ * |63            32|31           16|15         06|05  |04  |03|02 |01 |00   |
+ * |----------------|---------------|-------------|----|----|--|---|---|-----|
+ * | 32-bit address | 16-bit length | 0000000000  |Act2|Act1| 0|Int|End|Valid|
+ * |----------------|---------------|-------------|----|----|--|---|---|-----|
+ *
+ *
+ * | Act2 | Act1 |     Comment     | Operation                                                         |
+ * |------|------|-----------------|-------------------------------------------------------------------|
+ * |   0  |   0  | No op           | Don't care                                                        |
+ * |------|------|-----------------|-------------------------------------------------------------------|
+ * |   0  |   1  | Reserved        | Read this line and go to next one                                 |
+ * |------|------|-----------------|-------------------------------------------------------------------|
+ * |   1  |   0  | Transfer data   | Transfer data with address and length set in this descriptor line |
+ * |------|------|-----------------|-------------------------------------------------------------------|
+ * |   1  |   1  | Link descriptor | Link to another descriptor                                        |
+ * |------|------|-----------------|-------------------------------------------------------------------|
+ */
+/*! @brief The bit shift for LENGTH field in ADMA2's descriptor */
+#define SDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT (16U)
+/*! @brief The bit mask for LENGTH field in ADMA2's descriptor */
+#define SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK (0xFFFFU)
+/*! @brief The maximum value of LENGTH field in ADMA2's descriptor */
+#define SDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY (SDHC_ADMA2_DESCRIPTOR_LENGTH_MASK)
+
+/*! @brief ADMA1 descriptor control and status mask */
+enum _sdhc_adma2_descriptor_flag
+{
+    kSDHC_Adma2DescriptorValidFlag = (1U << 0U),     /*!< Valid flag */
+    kSDHC_Adma2DescriptorEndFlag = (1U << 1U),       /*!< End flag */
+    kSDHC_Adma2DescriptorInterruptFlag = (1U << 2U), /*!< Interrupt flag */
+    kSDHC_Adma2DescriptorActivity1Flag = (1U << 4U), /*!< Activity 1 mask */
+    kSDHC_Adma2DescriptorActivity2Flag = (1U << 5U), /*!< Activity 2 mask */
+
+    kSDHC_Adma2DescriptorTypeNop = (kSDHC_Adma2DescriptorValidFlag), /*!< No operation */
+    kSDHC_Adma2DescriptorTypeReserved =
+        (kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Reserved */
+    kSDHC_Adma2DescriptorTypeTransfer =
+        (kSDHC_Adma2DescriptorActivity2Flag | kSDHC_Adma2DescriptorValidFlag), /*!< Transfer type */
+    kSDHC_Adma2DescriptorTypeLink = (kSDHC_Adma2DescriptorActivity1Flag | kSDHC_Adma2DescriptorActivity2Flag |
+                                     kSDHC_Adma2DescriptorValidFlag), /*!< Link type */
+};
+
+/*! @brief Defines the adma1 descriptor structure. */
+typedef uint32_t sdhc_adma1_descriptor_t;
+
+/*! @brief Defines the ADMA2 descriptor structure. */
+typedef struct _sdhc_adma2_descriptor
+{
+    uint32_t attribute;      /*!< The control and status field */
+    const uint32_t *address; /*!< The address field */
+} sdhc_adma2_descriptor_t;
+
+/*!
+ * @brief SDHC capability information.
+ *
+ * Defines a structure to save the capability information of SDHC.
+ */
+typedef struct _sdhc_capability
+{
+    uint32_t specVersion;    /*!< Specification version */
+    uint32_t vendorVersion;  /*!< Vendor version */
+    uint32_t maxBlockLength; /*!< Maximum block length united as byte */
+    uint32_t maxBlockCount;  /*!< Maximum block count can be set one time */
+    uint32_t flags;          /*!< Capability flags to indicate the support information(_sdhc_capability_flag) */
+} sdhc_capability_t;
+
+/*! @brief Card transfer configuration.
+ *
+ * Define structure to configure the transfer-related command index/argument/flags and data block
+ * size/data block numbers. This structure needs to be filled each time a command is sent to the card.
+ */
+typedef struct _sdhc_transfer_config
+{
+    size_t dataBlockSize;     /*!< Data block size */
+    uint32_t dataBlockCount;  /*!< Data block count */
+    uint32_t commandArgument; /*!< Command argument */
+    uint32_t commandIndex;    /*!< Command index */
+    uint32_t flags;           /*!< Transfer flags(_sdhc_transfer_flag) */
+} sdhc_transfer_config_t;
+
+/*! @brief Data structure to configure the MMC boot feature */
+typedef struct _sdhc_boot_config
+{
+    uint32_t ackTimeoutCount;      /*!< Timeout value for the boot ACK. The available range is 0 ~ 15. */
+    sdhc_boot_mode_t bootMode;     /*!< Boot mode selection. */
+    uint32_t blockCount;           /*!< Stop at block gap value of automatic mode. Available range is 0 ~ 65535. */
+    bool enableBootAck;            /*!< Enable or disable boot ACK */
+    bool enableBoot;               /*!< Enable or disable fast boot */
+    bool enableAutoStopAtBlockGap; /*!< Enable or disable auto stop at block gap function in boot period */
+} sdhc_boot_config_t;
+
+/*! @brief Data structure to initialize the SDHC */
+typedef struct _sdhc_config
+{
+    bool cardDetectDat3;           /*!< Enable DAT3 as card detection pin */
+    sdhc_endian_mode_t endianMode; /*!< Endian mode */
+    sdhc_dma_mode_t dmaMode;       /*!< DMA mode */
+    uint32_t readWatermarkLevel;   /*!< Watermark level for DMA read operation. Available range is 1 ~ 128. */
+    uint32_t writeWatermarkLevel;  /*!< Watermark level for DMA write operation. Available range is 1 ~ 128. */
+} sdhc_config_t;
+
+/*!
+ * @brief Card data descriptor
+ *
+ * Defines a structure to contain data-related attribute. 'enableIgnoreError' is used for the case that upper card
+ * driver
+ * want to ignore the error event to read/write all the data not to stop read/write immediately when error event
+ * happen for example bus testing procedure for MMC card.
+ */
+typedef struct _sdhc_data
+{
+    bool enableAutoCommand12; /*!< Enable auto CMD12 */
+    bool enableIgnoreError;   /*!< Enable to ignore error event to read/write all the data */
+    size_t blockSize;         /*!< Block size */
+    uint32_t blockCount;      /*!< Block count */
+    uint32_t *rxData;         /*!< Buffer to save data read */
+    const uint32_t *txData;   /*!< Data buffer to write */
+} sdhc_data_t;
+
+/*!
+ * @brief Card command descriptor
+ *
+ * Define card command-related attribute.
+ */
+typedef struct _sdhc_command
+{
+    uint32_t index;                    /*!< Command index */
+    uint32_t argument;                 /*!< Command argument */
+    sdhc_command_type_t type;          /*!< Command type */
+    sdhc_response_type_t responseType; /*!< Command response type */
+    uint32_t response[4U];             /*!< Response for this command */
+} sdhc_command_t;
+
+/*! @brief Transfer state */
+typedef struct _sdhc_transfer
+{
+    sdhc_data_t *data;       /*!< Data to transfer */
+    sdhc_command_t *command; /*!< Command to send */
+} sdhc_transfer_t;
+
+/*! @brief SDHC handle typedef */
+typedef struct _sdhc_handle sdhc_handle_t;
+
+/*! @brief SDHC callback functions. */
+typedef struct _sdhc_transfer_callback
+{
+    void (*CardInserted)(void);  /*!< Card inserted occurs when DAT3/CD pin is for card detect */
+    void (*CardRemoved)(void);   /*!< Card removed occurs */
+    void (*SdioInterrupt)(void); /*!< SDIO card interrupt occurs */
+    void (*SdioBlockGap)(void);  /*!< SDIO card stopped at block gap occurs */
+    void (*TransferComplete)(SDHC_Type *base,
+                             sdhc_handle_t *handle,
+                             status_t status,
+                             void *userData); /*!< Transfer complete callback */
+} sdhc_transfer_callback_t;
+
+/*!
+ * @brief SDHC handle
+ *
+ * Defines the structure to save the SDHC state information and callback function. The detailed interrupt status when
+ * sending a command or transfering data can be obtained from the interruptFlags field by using the mask defined in
+ * sdhc_interrupt_flag_t.
+ *
+ * @note All the fields except interruptFlags and transferredWords must be allocated by the user.
+ */
+struct _sdhc_handle
+{
+    /* Transfer parameter */
+    sdhc_data_t *volatile data;       /*!< Data to transfer */
+    sdhc_command_t *volatile command; /*!< Command to send */
+
+    /* Transfer status */
+    volatile uint32_t interruptFlags;   /*!< Interrupt flags of last transaction */
+    volatile uint32_t transferredWords; /*!< Words transferred by DATAPORT way */
+
+    /* Callback functions */
+    sdhc_transfer_callback_t callback; /*!< Callback function */
+    void *userData;                    /*!< Parameter for transfer complete callback */
+};
+
+/*! @brief SDHC transfer function. */
+typedef status_t (*sdhc_transfer_function_t)(SDHC_Type *base, sdhc_transfer_t *content);
+
+/*! @brief SDHC host descriptor */
+typedef struct _sdhc_host
+{
+    SDHC_Type *base;                   /*!< SDHC peripheral base address */
+    uint32_t sourceClock_Hz;           /*!< SDHC source clock frequency united in Hz */
+    sdhc_config_t config;              /*!< SDHC configuration */
+    sdhc_capability_t capability;      /*!< SDHC capability information */
+    sdhc_transfer_function_t transfer; /*!< SDHC transfer function */
+} sdhc_host_t;
+
+/*************************************************************************************************
+ * API
+ ************************************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Initialization and deinitialization
+ * @{
+ */
+
+/*!
+ * @brief SDHC module initialization function.
+ *
+ * Configures the SDHC according to the user configuration.
+ *
+ * Example:
+   @code
+   sdhc_config_t config;
+   config.cardDetectDat3 = false;
+   config.endianMode = kSDHC_EndianModeLittle;
+   config.dmaMode = kSDHC_DmaModeAdma2;
+   config.readWatermarkLevel = 128U;
+   config.writeWatermarkLevel = 128U;
+   SDHC_Init(SDHC, &config);
+   @endcode
+ *
+ * @param base SDHC peripheral base address.
+ * @param config SDHC configuration information.
+ * @retval kStatus_Success Operate successfully.
+ */
+void SDHC_Init(SDHC_Type *base, const sdhc_config_t *config);
+
+/*!
+ * @brief Deinitializes the SDHC.
+ *
+ * @param base SDHC peripheral base address.
+ */
+void SDHC_Deinit(SDHC_Type *base);
+
+/*!
+ * @brief Resets the SDHC.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The reset type mask(_sdhc_reset).
+ * @param timeout Timeout for reset.
+ * @retval true Reset successfully.
+ * @retval false Reset failed.
+ */
+bool SDHC_Reset(SDHC_Type *base, uint32_t mask, uint32_t timeout);
+
+/* @} */
+
+/*!
+ * @name DMA Control
+ * @{
+ */
+
+/*!
+ * @brief Sets the ADMA descriptor table configuration.
+ *
+ * @param base SDHC peripheral base address.
+ * @param dmaMode DMA mode.
+ * @param table ADMA table address.
+ * @param tableWords ADMA table buffer length united as Words.
+ * @param data Data buffer address.
+ * @param dataBytes Data length united as bytes.
+ * @retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
+ * @retval kStatus_Success Operate successfully.
+ */
+status_t SDHC_SetAdmaTableConfig(SDHC_Type *base,
+                                 sdhc_dma_mode_t dmaMode,
+                                 uint32_t *table,
+                                 uint32_t tableWords,
+                                 const uint32_t *data,
+                                 uint32_t dataBytes);
+
+/* @} */
+
+/*!
+ * @name Interrupts
+ * @{
+ */
+
+/*!
+ * @brief Enables the interrupt status.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask Interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline void SDHC_EnableInterruptStatus(SDHC_Type *base, uint32_t mask)
+{
+    base->IRQSTATEN |= mask;
+}
+
+/*!
+ * @brief Disables the interrupt status.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline void SDHC_DisableInterruptStatus(SDHC_Type *base, uint32_t mask)
+{
+    base->IRQSTATEN &= ~mask;
+}
+
+/*!
+ * @brief Enables the interrupt signal corresponding to the interrupt status flag.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline void SDHC_EnableInterruptSignal(SDHC_Type *base, uint32_t mask)
+{
+    base->IRQSIGEN |= mask;
+}
+
+/*!
+ * @brief Disables the interrupt signal corresponding to the interrupt status flag.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline void SDHC_DisableInterruptSignal(SDHC_Type *base, uint32_t mask)
+{
+    base->IRQSIGEN &= ~mask;
+}
+
+/* @} */
+
+/*!
+ * @name Status
+ * @{
+ */
+
+/*!
+ * @brief Gets the current interrupt status.
+ *
+ * @param base SDHC peripheral base address.
+ * @return Current interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline uint32_t SDHC_GetInterruptStatusFlags(SDHC_Type *base)
+{
+    return base->IRQSTAT;
+}
+
+/*!
+ * @brief Clears a specified interrupt status.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The interrupt status flags mask(_sdhc_interrupt_status_flag).
+ */
+static inline void SDHC_ClearInterruptStatusFlags(SDHC_Type *base, uint32_t mask)
+{
+    base->IRQSTAT = mask;
+}
+
+/*!
+ * @brief Gets the status of auto command 12 error.
+ *
+ * @param base SDHC peripheral base address.
+ * @return Auto command 12 error status flags mask(_sdhc_auto_command12_error_status_flag).
+ */
+static inline uint32_t SDHC_GetAutoCommand12ErrorStatusFlags(SDHC_Type *base)
+{
+    return base->AC12ERR;
+}
+
+/*!
+ * @brief Gets the status of the ADMA error.
+ *
+ * @param base SDHC peripheral base address.
+ * @return ADMA error status flags mask(_sdhc_adma_error_status_flag).
+ */
+static inline uint32_t SDHC_GetAdmaErrorStatusFlags(SDHC_Type *base)
+{
+    return base->ADMAES;
+}
+
+/*!
+ * @brief Gets a present status.
+ *
+ * This function gets the present SDHC's status except for an interrupt status and an error status.
+ *
+ * @param base SDHC peripheral base address.
+ * @return Present SDHC's status flags mask(_sdhc_present_status_flag).
+ */
+static inline uint32_t SDHC_GetPresentStatusFlags(SDHC_Type *base)
+{
+    return base->PRSSTAT;
+}
+
+/* @} */
+
+/*!
+ * @name Bus Operations
+ * @{
+ */
+
+/*!
+ * @brief Gets the capability information.
+ *
+ * @param base SDHC peripheral base address.
+ * @param capability Structure to save capability information.
+ */
+void SDHC_GetCapability(SDHC_Type *base, sdhc_capability_t *capability);
+
+/*!
+ * @brief Enables or disables the SD bus clock.
+ *
+ * @param base SDHC peripheral base address.
+ * @param enable True to enable, false to disable.
+ */
+static inline void SDHC_EnableSdClock(SDHC_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->SYSCTL |= SDHC_SYSCTL_SDCLKEN_MASK;
+    }
+    else
+    {
+        base->SYSCTL &= ~SDHC_SYSCTL_SDCLKEN_MASK;
+    }
+}
+
+/*!
+ * @brief Sets the SD bus clock frequency.
+ *
+ * @param base SDHC peripheral base address.
+ * @param srcClock_Hz SDHC source clock frequency united in Hz.
+ * @param busClock_Hz SD bus clock frequency united in Hz.
+ *
+ * @return The nearest frequency of busClock_Hz configured to SD bus.
+ */
+uint32_t SDHC_SetSdClock(SDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz);
+
+/*!
+ * @brief Sends 80 clocks to the card to set it to the active state.
+ *
+ * This function must be called each time the card is inserted to ensure that the card can receive the command
+ * correctly.
+ *
+ * @param base SDHC peripheral base address.
+ * @param timeout Timeout to initialize card.
+ * @retval true Set card active successfully.
+ * @retval false Set card active failed.
+ */
+bool SDHC_SetCardActive(SDHC_Type *base, uint32_t timeout);
+
+/*!
+ * @brief Sets the data transfer width.
+ *
+ * @param base SDHC peripheral base address.
+ * @param width Data transfer width.
+ */
+static inline void SDHC_SetDataBusWidth(SDHC_Type *base, sdhc_data_bus_width_t width)
+{
+    base->PROCTL = ((base->PROCTL & ~SDHC_PROCTL_DTW_MASK) | SDHC_PROCTL_DTW(width));
+}
+
+/*!
+ * @brief Sets the card transfer-related configuration.
+ *
+ * This function fills the card transfer-related command argument/transfer flag/data size. The command and data are sent
+ by
+ * SDHC after calling this function.
+ *
+ * Example:
+   @code
+   sdhc_transfer_config_t transferConfig;
+   transferConfig.dataBlockSize = 512U;
+   transferConfig.dataBlockCount = 2U;
+   transferConfig.commandArgument = 0x01AAU;
+   transferConfig.commandIndex = 8U;
+   transferConfig.flags |= (kSDHC_EnableDmaFlag | kSDHC_EnableAutoCommand12Flag | kSDHC_MultipleBlockFlag);
+   SDHC_SetTransferConfig(SDHC, &transferConfig);
+   @endcode
+ *
+ * @param base SDHC peripheral base address.
+ * @param config Command configuration structure.
+ */
+void SDHC_SetTransferConfig(SDHC_Type *base, const sdhc_transfer_config_t *config);
+
+/*!
+ * @brief Gets the command response.
+ *
+ * @param base SDHC peripheral base address.
+ * @param index The index of response register, range from 0 to 3.
+ * @return Response register transfer.
+ */
+static inline uint32_t SDHC_GetCommandResponse(SDHC_Type *base, uint32_t index)
+{
+    assert(index < 4U);
+
+    return base->CMDRSP[index];
+}
+
+/*!
+ * @brief Fills the the data port.
+ *
+ * This function is used to implement the data transfer by Data Port instead of DMA.
+ *
+ * @param base SDHC peripheral base address.
+ * @param data The data about to be sent.
+ */
+static inline void SDHC_WriteData(SDHC_Type *base, uint32_t data)
+{
+    base->DATPORT = data;
+}
+
+/*!
+ * @brief Retrieves the data from the data port.
+ *
+ * This function is used to implement the data transfer by Data Port instead of DMA.
+ *
+ * @param base SDHC peripheral base address.
+ * @return The data has been read.
+ */
+static inline uint32_t SDHC_ReadData(SDHC_Type *base)
+{
+    return base->DATPORT;
+}
+
+/*!
+ * @brief Enables or disables a wakeup event in low-power mode.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask Wakeup events mask(_sdhc_wakeup_event).
+ * @param enable True to enable, false to disable.
+ */
+static inline void SDHC_EnableWakeupEvent(SDHC_Type *base, uint32_t mask, bool enable)
+{
+    if (enable)
+    {
+        base->PROCTL |= mask;
+    }
+    else
+    {
+        base->PROCTL &= ~mask;
+    }
+}
+
+/*!
+ * @brief Enables or disables the card detection level for testing.
+ *
+ * @param base SDHC peripheral base address.
+ * @param enable True to enable, false to disable.
+ */
+static inline void SDHC_EnableCardDetectTest(SDHC_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->PROCTL |= SDHC_PROCTL_CDSS_MASK;
+    }
+    else
+    {
+        base->PROCTL &= ~SDHC_PROCTL_CDSS_MASK;
+    }
+}
+
+/*!
+ * @brief Sets the card detection test level.
+ *
+ * This function sets the card detection test level to indicate whether the card is inserted into the SDHC when DAT[3]/
+ * CD pin is selected as a card detection pin. This function can also assert the pin logic when DAT[3]/CD pin is
+ * selected
+ * as the card detection pin.
+ *
+ * @param base SDHC peripheral base address.
+ * @param high True to set the card detect level to high.
+ */
+static inline void SDHC_SetCardDetectTestLevel(SDHC_Type *base, bool high)
+{
+    if (high)
+    {
+        base->PROCTL |= SDHC_PROCTL_CDTL_MASK;
+    }
+    else
+    {
+        base->PROCTL &= ~SDHC_PROCTL_CDTL_MASK;
+    }
+}
+
+/*!
+ * @brief Enables or disables the SDIO card control.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask SDIO card control flags mask(_sdhc_sdio_control_flag).
+ * @param enable True to enable, false to disable.
+ */
+void SDHC_EnableSdioControl(SDHC_Type *base, uint32_t mask, bool enable);
+
+/*!
+ * @brief Restarts a transaction which has stopped at the block GAP for the SDIO card.
+ *
+ * @param base SDHC peripheral base address.
+ */
+static inline void SDHC_SetContinueRequest(SDHC_Type *base)
+{
+    base->PROCTL |= SDHC_PROCTL_CREQ_MASK;
+}
+
+/*!
+ * @brief Configures the MMC boot feature.
+ *
+ * Example:
+   @code
+   sdhc_boot_config_t config;
+   config.ackTimeoutCount = 4;
+   config.bootMode = kSDHC_BootModeNormal;
+   config.blockCount = 5;
+   config.enableBootAck = true;
+   config.enableBoot = true;
+   config.enableAutoStopAtBlockGap = true;
+   SDHC_SetMmcBootConfig(SDHC, &config);
+   @endcode
+ *
+ * @param base SDHC peripheral base address.
+ * @param config The MMC boot configuration information.
+ */
+void SDHC_SetMmcBootConfig(SDHC_Type *base, const sdhc_boot_config_t *config);
+
+/*!
+ * @brief Forces generating events according to the given mask.
+ *
+ * @param base SDHC peripheral base address.
+ * @param mask The force events mask(_sdhc_force_event).
+ */
+static inline void SDHC_SetForceEvent(SDHC_Type *base, uint32_t mask)
+{
+    base->FEVT = mask;
+}
+
+/* @} */
+
+/*!
+ * @name Transactional
+ * @{
+ */
+
+/*!
+ * @brief Transfers the command/data using a blocking method.
+ *
+ * This function waits until the command response/data is received or the SDHC encounters an error by polling the status
+ * flag.
+ * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
+ * the re-entry mechanism.
+ *
+ * @note There is no need to call the API 'SDHC_TransferCreateHandle' when calling this API.
+ *
+ * @param base SDHC peripheral base address.
+ * @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2.
+ * @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2.
+ * @param transfer Transfer content.
+ * @retval kStatus_InvalidArgument Argument is invalid.
+ * @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
+ * @retval kStatus_SDHC_SendCommandFailed Send command failed.
+ * @retval kStatus_SDHC_TransferDataFailed Transfer data failed.
+ * @retval kStatus_Success Operate successfully.
+ */
+status_t SDHC_TransferBlocking(SDHC_Type *base,
+                               uint32_t *admaTable,
+                               uint32_t admaTableWords,
+                               sdhc_transfer_t *transfer);
+
+/*!
+ * @brief Creates the SDHC handle.
+ *
+ * @param base SDHC peripheral base address.
+ * @param handle SDHC handle pointer.
+ * @param callback Structure pointer to contain all callback functions.
+ * @param userData Callback function parameter.
+ */
+void SDHC_TransferCreateHandle(SDHC_Type *base,
+                               sdhc_handle_t *handle,
+                               const sdhc_transfer_callback_t *callback,
+                               void *userData);
+
+/*!
+ * @brief Transfers the command/data using an interrupt and an asynchronous method.
+ *
+ * This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an
+ * error.
+ * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
+ * the re-entry mechanism.
+ *
+ * @note Call the API 'SDHC_TransferCreateHandle' when calling this API.
+ *
+ * @param base SDHC peripheral base address.
+ * @param handle SDHC handle.
+ * @param admaTable ADMA table address, can't be null if transfer way is ADMA1/ADMA2.
+ * @param admaTableWords ADMA table length united as words, can't be 0 if transfer way is ADMA1/ADMA2.
+ * @param transfer Transfer content.
+ * @retval kStatus_InvalidArgument Argument is invalid.
+ * @retval kStatus_SDHC_BusyTransferring Busy transferring.
+ * @retval kStatus_SDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
+ * @retval kStatus_Success Operate successfully.
+ */
+status_t SDHC_TransferNonBlocking(
+    SDHC_Type *base, sdhc_handle_t *handle, uint32_t *admaTable, uint32_t admaTableWords, sdhc_transfer_t *transfer);
+
+/*!
+ * @brief IRQ handler for the SDHC.
+ *
+ * This function deals with the IRQs on the given host controller.
+ *
+ * @param base SDHC peripheral base address.
+ * @param handle SDHC handle.
+ */
+void SDHC_TransferHandleIRQ(SDHC_Type *base, sdhc_handle_t *handle);
+
+/* @} */
+
+#if defined(__cplusplus)
+}
+#endif
+/*! @} */
+
+#endif /* _FSL_SDHC_H_*/