mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
- Child:
- 122:f9eeca106725
diff -r 4f6c30876dfa -r 34e6b704fe68 TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio.h
--- a/TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio.h Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio.h Fri Oct 02 07:35:07 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f0xx_hal_gpio.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief Header file of GPIO HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -93,19 +93,9 @@
*/
/* Exported constants --------------------------------------------------------*/
-
/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
* @{
*/
-
-/** @defgroup GPIO_pin_actions GPIO pin actions
- * @{
- */
-#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
-/**
- * @}
- */
-
/** @defgroup GPIO_pins GPIO pins
* @{
*/
@@ -128,8 +118,6 @@
#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
-
-#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
/**
* @}
*/
@@ -149,30 +137,13 @@
#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
-
-#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
-
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-
#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
- ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
- ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
- ((MODE) == GPIO_MODE_AF_PP) ||\
- ((MODE) == GPIO_MODE_AF_OD) ||\
- ((MODE) == GPIO_MODE_IT_RISING) ||\
- ((MODE) == GPIO_MODE_IT_FALLING) ||\
- ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING) ||\
- ((MODE) == GPIO_MODE_EVT_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_ANALOG))
-
/**
* @}
*/
@@ -185,8 +156,6 @@
#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
- ((SPEED) == GPIO_SPEED_HIGH))
/**
* @}
*/
@@ -198,9 +167,6 @@
#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
-
-#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
- ((PULL) == GPIO_PULLDOWN))
/**
* @}
*/
@@ -210,13 +176,12 @@
*/
/* Exported macro ------------------------------------------------------------*/
-
/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
* @{
*/
/**
- * @brief Checks whether the specified EXTI line flag is set or not.
+ * @brief Check whether the specified EXTI line flag is set or not.
* @param __EXTI_LINE__: specifies the EXTI line flag to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
@@ -224,7 +189,7 @@
#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
- * @brief Clears the EXTI's line pending flags.
+ * @brief Clear the EXTI's line pending flags.
* @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
@@ -232,7 +197,7 @@
#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
- * @brief Checks whether the specified EXTI line is asserted or not.
+ * @brief Check whether the specified EXTI line is asserted or not.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval The new state of __EXTI_LINE__ (SET or RESET).
@@ -240,7 +205,7 @@
#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
/**
- * @brief Clears the EXTI's line pending bits.
+ * @brief Clear the EXTI's line pending bits.
* @param __EXTI_LINE__: specifies the EXTI lines to clear.
* This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
* @retval None
@@ -248,7 +213,7 @@
#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
/**
- * @brief Generates a Software interrupt on selected EXTI line.
+ * @brief Generate a Software interrupt on selected EXTI line.
* @param __EXTI_LINE__: specifies the EXTI line to check.
* This parameter can be GPIO_PIN_x where x can be(0..15)
* @retval None
@@ -259,7 +224,39 @@
* @}
*/
-/* Include GPIO HAL Extension module */
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+#define IS_GPIO_PIN(__PIN__) (((__PIN__) & GPIO_PIN_MASK) != (uint32_t)0x00)
+
+#define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\
+ ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\
+ ((__MODE__) == GPIO_MODE_AF_PP) ||\
+ ((__MODE__) == GPIO_MODE_AF_OD) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_IT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((__MODE__) == GPIO_MODE_ANALOG))
+
+#define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_LOW) ||\
+ ((__SPEED__) == GPIO_SPEED_MEDIUM) ||\
+ ((__SPEED__) == GPIO_SPEED_HIGH))
+
+#define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\
+ ((__PULL__) == GPIO_PULLUP) || \
+ ((__PULL__) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extended module */
#include "stm32f0xx_hal_gpio_ex.h"
/* Exported functions --------------------------------------------------------*/
@@ -315,4 +312,3 @@
#endif /* __STM32F0xx_HAL_GPIO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
