The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_WALLBOT_BLE/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_WALLBOT_BLE/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2017-11-09
- Revision:
- 157:e7ca05fa8600
- Parent:
- 156:ff21514d8981
File content as of revision 157:e7ca05fa8600:
/* mbed Microcontroller Library * Copyright (c) 2013 Nordic Semiconductor * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; typedef enum { p0 = 0, p1 = 1, p2 = 2, p3 = 3, p4 = 4, p5 = 5, p6 = 6, p7 = 7, p8 = 8, p9 = 9, p10 = 10, p11 = 11, p12 = 12, p13 = 13, p14 = 14, p15 = 15, p16 = 16, p17 = 17, p18 = 18, p19 = 19, p20 = 20, p21 = 21, p22 = 22, p23 = 23, p24 = 24, p25 = 25, p26 = 26, p27 = 27, p28 = 28, p29 = 29, p30 = 30, P0_0 = p0, P0_1 = p1, P0_2 = p2, P0_3 = p3, P0_4 = p4, P0_5 = p5, P0_6 = p6, P0_7 = p7, P0_8 = p8, P0_9 = p9, P0_10 = p10, P0_11 = p11, P0_12 = p12, P0_13 = p13, P0_14 = p14, P0_15 = p15, P0_16 = p16, P0_17 = p17, P0_18 = p18, P0_19 = p19, P0_20 = p20, P0_21 = p21, P0_22 = p22, P0_23 = p23, P0_24 = p24, P0_25 = p25, P0_26 = p26, P0_27 = p27, P0_28 = p28, P0_29 = p29, P0_30 = p30, LED1 = p18, LED2 = p19, LED3 = p18, LED4 = p19, BUTTON1 = p16, BUTTON2 = p17, RX_PIN_NUMBER = p11, TX_PIN_NUMBER = p9, CTS_PIN_NUMBER = 31, // unused RTS_PIN_NUMBER = 31, // unused // mbed interface pins USBTX = TX_PIN_NUMBER, USBRX = RX_PIN_NUMBER, SPI_PSELMOSI0 = p20, SPI_PSELMISO0 = p22, SPI_PSELSS0 = p24, SPI_PSELSCK0 = p25, SPI_PSELMOSI1 = p12, SPI_PSELMISO1 = p13, SPI_PSELSS1 = p14, SPI_PSELSCK1 = p15, SPIS_PSELMOSI = p12, SPIS_PSELMISO = p13, SPIS_PSELSS = p14, SPIS_PSELSCK = p15, LED_CONNECT = P0_18, LED_MODE = P0_19, OUT_LOW= P0_20, SW1 = P0_16, SW2 = P0_17, R_PWM = P0_28, R_IN1 = P0_30, R_IN2 = P0_0, L_PWM = P0_29, L_IN1 = P0_23, L_IN2 = P0_24, MMC_SCK = P0_15, MMC_CS = P0_14, MMC_SDO = P0_13, MMC_SDI = P0_12, R_ENC1 = P0_8, R_ENC2 = P0_10, L_ENC1 = P0_6, L_ENC2 = P0_7, P1IN = P0_2, P2IN = P0_3, P3IN = P0_4, P4IN = P0_5, I2C_SCL = P0_21, I2C_SDA = P0_22, I2C_SCL0 = P0_21, //required definition for the i2c patch I2C_SDA0 = P0_22, //required definition for the i2c patch // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullDown = 1, PullUp = 3, PullDefault = PullUp } PinMode; #ifdef __cplusplus } #endif #endif