The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_NUMAKER_PFM_M453/TOOLCHAIN_ARM_STD/m451_eadc.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 172:65be27845400
- Parent:
- 171:3a7713b1edbc
File content as of revision 172:65be27845400:
/****************************************************************************** * @file eadc.h * @version V0.10 * $Revision: 18 $ * $Date: 15/08/11 10:26a $ * @brief M451 series EADC driver header file * * @note * Copyright (C) 2013~2015 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __EADC_H__ #define __EADC_H__ /*---------------------------------------------------------------------------------------------------------*/ /* Include related headers */ /*---------------------------------------------------------------------------------------------------------*/ #include "M451Series.h" #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup EADC_Driver EADC Driver @{ */ /** @addtogroup EADC_EXPORTED_CONSTANTS EADC Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC_CTL Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC_CTL_DIFFEN_SINGLE_END (0UL<<EADC_CTL_DIFFEN_Pos) /*!< Single-end input mode */ #define EADC_CTL_DIFFEN_DIFFERENTIAL (1UL<<EADC_CTL_DIFFEN_Pos) /*!< Differential input mode */ #define EADC_CTL_DMOF_STRAIGHT_BINARY (0UL<<EADC_CTL_DMOF_Pos) /*!< Select the straight binary format as the output format of the conversion result */ #define EADC_CTL_DMOF_TWOS_COMPLEMENT (1UL<<EADC_CTL_DMOF_Pos) /*!< Select the 2's complement format as the output format of the conversion result */ #define EADC_CTL_SMPTSEL1 (0UL<<EADC_CTL_SMPTSEL_Pos) /*!< 1 ADC clock sampling time */ #define EADC_CTL_SMPTSEL2 (1UL<<EADC_CTL_SMPTSEL_Pos) /*!< 2 ADC clock sampling time */ #define EADC_CTL_SMPTSEL3 (2UL<<EADC_CTL_SMPTSEL_Pos) /*!< 3 ADC clock sampling time */ #define EADC_CTL_SMPTSEL4 (3UL<<EADC_CTL_SMPTSEL_Pos) /*!< 4 ADC clock sampling time */ #define EADC_CTL_SMPTSEL5 (4UL<<EADC_CTL_SMPTSEL_Pos) /*!< 5 ADC clock sampling time */ #define EADC_CTL_SMPTSEL6 (5UL<<EADC_CTL_SMPTSEL_Pos) /*!< 6 ADC clock sampling time */ #define EADC_CTL_SMPTSEL7 (6UL<<EADC_CTL_SMPTSEL_Pos) /*!< 7 ADC clock sampling time */ #define EADC_CTL_SMPTSEL8 (7UL<<EADC_CTL_SMPTSEL_Pos) /*!< 8 ADC clock sampling time */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC_SCTL Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC_SCTL_CHSEL(x) ((x) << EADC_SCTL_CHSEL_Pos) /*!< A/D sample module channel selection */ #define EADC_SCTL_TRGDLYDIV(x) ((x) << EADC_SCTL_TRGDLYDIV_Pos) /*!< A/D sample module start of conversion trigger delay clock divider selection */ #define EADC_SCTL_TRGDLYCNT(x) ((x) << EADC_SCTL_TRGDLYCNT_Pos) /*!< A/D sample module start of conversion trigger delay time */ #define EADC_SOFTWARE_TRIGGER (0UL<<EADC_SCTL_TRGSEL_Pos) /*!< Software trigger */ #define EADC_FALLING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin falling edge trigger */ #define EADC_RISING_EDGE_TRIGGER (EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin rising edge trigger */ #define EADC_FALLING_RISING_EDGE_TRIGGER (EADC_SCTL_EXTFEN_Msk | EADC_SCTL_EXTREN_Msk | (1UL<<EADC_SCTL_TRGSEL_Pos)) /*!< STADC pin both falling and rising edge trigger */ #define EADC_ADINT0_TRIGGER (2UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT0 interrupt EOC pulse trigger */ #define EADC_ADINT1_TRIGGER (3UL<<EADC_SCTL_TRGSEL_Pos) /*!< ADC ADINT1 interrupt EOC pulse trigger */ #define EADC_TIMER0_TRIGGER (4UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer0 overflow pulse trigger */ #define EADC_TIMER1_TRIGGER (5UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer1 overflow pulse trigger */ #define EADC_TIMER2_TRIGGER (6UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer2 overflow pulse trigger */ #define EADC_TIMER3_TRIGGER (7UL<<EADC_SCTL_TRGSEL_Pos) /*!< Timer3 overflow pulse trigger */ #define EADC_PWM0TG0_TRIGGER (8UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG0 trigger */ #define EADC_PWM0TG1_TRIGGER (9UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG1 trigger */ #define EADC_PWM0TG2_TRIGGER (0xAUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG2 trigger */ #define EADC_PWM0TG3_TRIGGER (0xBUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG3 trigger */ #define EADC_PWM0TG4_TRIGGER (0xCUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG4 trigger */ #define EADC_PWM0TG5_TRIGGER (0xDUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM0TG5 trigger */ #define EADC_PWM1TG0_TRIGGER (0xEUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG0 trigger */ #define EADC_PWM1TG1_TRIGGER (0xFUL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG1 trigger */ #define EADC_PWM1TG2_TRIGGER (0x10UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG2 trigger */ #define EADC_PWM1TG3_TRIGGER (0x11UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG3 trigger */ #define EADC_PWM1TG4_TRIGGER (0x12UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG4 trigger */ #define EADC_PWM1TG5_TRIGGER (0x13UL<<EADC_SCTL_TRGSEL_Pos) /*!< PWM1TG5 trigger */ #define EADC_SCTL_TRGDLYDIV_DIVIDER_1 (0<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/1 */ #define EADC_SCTL_TRGDLYDIV_DIVIDER_2 (0x1UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/2 */ #define EADC_SCTL_TRGDLYDIV_DIVIDER_4 (0x2UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/4 */ #define EADC_SCTL_TRGDLYDIV_DIVIDER_16 (0x3UL<<EADC_SCTL_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/16 */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC_CMP Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC_CMP_CMPCOND_LESS_THAN (0UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "less than" */ #define EADC_CMP_CMPCOND_GREATER_OR_EQUAL (1UL<<EADC_CMP_CMPCOND_Pos) /*!< The compare condition is "greater than or equal to" */ #define EADC_CMP_CMPWEN_ENABLE (EADC_CMP_CMPWEN_Msk) /*!< Compare window mode enable */ #define EADC_CMP_CMPWEN_DISABLE (~EADC_CMP_CMPWEN_Msk) /*!< Compare window mode disable */ #define EADC_CMP_ADCMPIE_ENABLE (EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt enable */ #define EADC_CMP_ADCMPIE_DISABLE (~EADC_CMP_ADCMPIE_Msk) /*!< A/D result compare interrupt disable */ /*@}*/ /* end of group EADC_EXPORTED_CONSTANTS */ /** @addtogroup EADC_EXPORTED_FUNCTIONS EADC Exported Functions @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC Macro Definitions */ /*---------------------------------------------------------------------------------------------------------*/ /** * @brief A/D Converter Control Circuits Reset. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details ADCRST bit (EADC_CT[1]) remains 1 during ADC reset, when ADC reset end, the ADCRST bit is automatically cleared to 0. */ #define EADC_CONV_RESET(eadc) ((eadc)->CTL |= EADC_CTL_ADRST_Msk) /** * @brief Enable PDMA transfer. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details When A/D conversion is completed, the converted data is loaded into EADC_DATn (n: 0 ~ 18) register, * user can enable this bit to generate a PDMA data transfer request. * @note When set PDMAEN bit (EADC_CTL[11]), user must set ADINTENn (EADC_CTL[5:2], n=0~3) = 0 to disable interrupt. */ #define EADC_ENABLE_PDMA(eadc) ((eadc)->CTL |= EADC_CTL_PDMAEN_Msk) /** * @brief Disable PDMA transfer. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details This macro is used to disable PDMA transfer. */ #define EADC_DISABLE_PDMA(eadc) ((eadc)->CTL &= (~EADC_CTL_PDMAEN_Msk)) /** * @brief Enable double buffer mode. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3. * @return None * @details The ADC controller supports a double buffer mode in sample module 0~3. * If user enable DBMEN (EADC_SCTLn[23], n=0~3), the double buffer mode will enable. */ #define EADC_ENABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_DBMEN_Msk) /** * @brief Disable double buffer mode. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 3. * @return None * @details Sample has one sample result register. */ #define EADC_DISABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_DBMEN_Msk) /** * @brief Set ADIFn at A/D end of conversion. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15. * @return None * @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the start of conversion. */ #define EADC_ENABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] |= EADC_SCTL_INTPOS_Msk) /** * @brief Set ADIFn at A/D start of conversion. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 15. * @return None * @details The A/D converter generates ADIFn (EADC_STATUS2[3:0], n=0~3) at the end of conversion. */ #define EADC_DISABLE_INT_POSITION(eadc, u32ModuleNum) ((eadc)->SCTL[(u32ModuleNum)] &= ~EADC_SCTL_INTPOS_Msk) /** * @brief Enable the interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status. * This parameter decides which interrupts will be enabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3. * @return None * @details The A/D converter generates a conversion end ADIFn (EADC_STATUS2[n]) upon the end of specific sample module A/D conversion. * If ADCIENn bit (EADC_CTL[n+2]) is set then conversion end interrupt request ADINTn is generated (n=0~3). */ #define EADC_ENABLE_INT(eadc, u32Mask) ((eadc)->CTL |= ((u32Mask) << EADC_CTL_ADCIEN0_Pos)) /** * @brief Disable the interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32Mask Decides the combination of interrupt status bits. Each bit corresponds to a interrupt status. * This parameter decides which interrupts will be disabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3. * @return None * @details Specific sample module A/D ADINT0 interrupt function Disabled. */ #define EADC_DISABLE_INT(eadc, u32Mask) ((eadc)->CTL &= ~((u32Mask) << EADC_CTL_ADCIEN0_Pos)) /** * @brief Enable the sample module interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3. * @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status. * This parameter decides which sample module interrupts will be enabled, valid range are between 1~0x7FFFF. * @return None * @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address. */ #define EADC_ENABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] |= (u32ModuleMask)) /** * @brief Disable the sample module interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3. * @param[in] u32ModuleMask the combination of sample module interrupt status bits. Each bit corresponds to a sample module interrupt status. * This parameter decides which sample module interrupts will be disabled, valid range are between 1~0x7FFFF. * @return None * @details There are 4 ADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address. */ #define EADC_DISABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] &= ~(u32ModuleMask)) /** * @brief Set the input mode output format. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32Format Decides the output format. Valid values are: * - \ref EADC_CTL_DMOF_STRAIGHT_BINARY :Select the straight binary format as the output format of the conversion result. * - \ref EADC_CTL_DMOF_TWOS_COMPLEMENT :Select the 2's complement format as the output format of the conversion result. * @return None * @details The macro is used to set A/D input mode output format. */ #define EADC_SET_DMOF(eadc, u32Format) ((eadc)->CTL = ((eadc)->CTL & ~EADC_CTL_DMOF_Msk) | (u32Format)) /** * @brief Start the A/D conversion. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module. * This parameter decides which sample module will be conversion, valid range are between 1~0x7FFFF. * Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module 18. * @return None * @details After write EADC_SWTRG register to start ADC conversion, the EADC_PENDSTS register will show which SAMPLE will conversion. */ #define EADC_START_CONV(eadc, u32ModuleMask) ((eadc)->SWTRG = (u32ModuleMask)) /** * @brief Cancel the conversion for sample module. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module. * This parameter decides which sample module will stop the conversion, valid range are between 1~0x7FFFF. * Bit 0 is sample module 0, bit 1 is sample module 1..., bit 18 is sample module18. * @return None * @details If user want to disable the conversion of the sample module, user can write EADC_PENDSTS register to clear it. */ #define EADC_STOP_CONV(eadc, u32ModuleMask) ((eadc)->PENDSTS = (u32ModuleMask)) /** * @brief Get the conversion pending flag. * @param[in] eadc The pointer of the specified EADC module. * @return Return the conversion pending sample module. * @details This STPFn(EADC_PENDSTS[18:0]) bit remains 1 during pending state, when the respective ADC conversion is end, * the STPFn (n=0~18) bit is automatically cleared to 0. */ #define EADC_GET_PENDING_CONV(eadc) ((eadc)->PENDSTS) /** * @brief Get the conversion data of the user-specified sample module. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18. * @return Return the conversion data of the user-specified sample module. * @details This macro is used to read RESULT bit (EADC_DATn[15:0], n=0~18) field to get conversion data. */ #define EADC_GET_CONV_DATA(eadc, u32ModuleNum) ((eadc)->DAT[(u32ModuleNum)] & EADC_DAT_RESULT_Msk) /** * @brief Get the data overrun flag of the user-specified sample module. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of data overrun status bits. Each bit corresponds to a data overrun status, valid range are between 1~0x7FFFF. * @return Return the data overrun flag of the user-specified sample module. * @details This macro is used to read OV bit (EADC_STATUS0[31:16], EADC_STATUS1[18:16]) field to get data overrun status. */ #define EADC_GET_DATA_OVERRUN_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 >> EADC_STATUS0_OV_Pos) | ((eadc)->STATUS1 & EADC_STATUS1_OV_Msk)) & (u32ModuleMask)) /** * @brief Get the data valid flag of the user-specified sample module. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of data valid status bits. Each bit corresponds to a data valid status, valid range are between 1~0x7FFFF. * @return Return the data valid flag of the user-specified sample module. * @details This macro is used to read VALID bit (EADC_STATUS0[15:0], EADC_STATUS1[1:0]) field to get data overrun status. */ #define EADC_GET_DATA_VALID_FLAG(eadc, u32ModuleMask) ((((eadc)->STATUS0 & EADC_STATUS0_VALID_Msk) | (((eadc)->STATUS1 & EADC_STATUS1_VALID_Msk) << 16)) & (u32ModuleMask)) /** * @brief Get the double data of the user-specified sample module. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid value are from 0 to 18. * @return Return the double data of the user-specified sample module. * @details This macro is used to read RESULT bit (EADC_DDATn[15:0], n=0~3) field to get conversion data. */ #define EADC_GET_DOUBLE_DATA(eadc, u32ModuleNum) ((eadc)->DDAT[(u32ModuleNum)] & EADC_DDAT_RESULT_Msk) /** * @brief Get the user-specified interrupt flags. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32Mask The combination of interrupt status bits. Each bit corresponds to a interrupt status. * Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3. * Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3. * @return Return the user-specified interrupt flags. * @details This macro is used to get the user-specified interrupt flags. */ #define EADC_GET_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 & (u32Mask)) /** * @brief Get the user-specified sample module overrun flags. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status, valid range are between 1~0x7FFFF. * @return Return the user-specified sample module overrun flags. * @details This macro is used to get the user-specified sample module overrun flags. */ #define EADC_GET_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS & (u32ModuleMask)) /** * @brief Clear the selected interrupt status bits. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32Mask The combination of compare interrupt status bits. Each bit corresponds to a compare interrupt status. * Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3. * Bit 4 is ADCMPF0, bit 5 is ADCMPF1..., bit 7 is ADCMPF3. * @return None * @details This macro is used to clear clear the selected interrupt status bits. */ #define EADC_CLR_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS2 = (u32Mask)) /** * @brief Clear the selected sample module overrun status bits. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status. * Bit 0 is SPOVF0, bit 1 is SPOVF1..., bit 18 is SPOVF18. * @return None * @details This macro is used to clear the selected sample module overrun status bits. */ #define EADC_CLR_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) ((eadc)->OVSTS = (u32ModuleMask)) /** * @brief Check all sample module A/D result data register overrun flags. * @param[in] eadc The pointer of the specified EADC module. * @retval 0 None of sample module data register overrun flag is set to 1. * @retval 1 Any one of sample module data register overrun flag is set to 1. * @details The AOV bit (EADC_STATUS2[27]) will keep 1 when any one of sample module data register overrun flag OVn (EADC_DATn[16]) is set to 1. */ #define EADC_IS_DATA_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AOV_Msk) >> EADC_STATUS2_AOV_Pos) /** * @brief Check all sample module A/D result data register valid flags. * @param[in] eadc The pointer of the specified EADC module. * @retval 0 None of sample module data register valid flag is set to 1. * @retval 1 Any one of sample module data register valid flag is set to 1. * @details The AVALID bit (EADC_STATUS2[26]) will keep 1 when any one of sample module data register valid flag VALIDn (EADC_DATn[17]) is set to 1. */ #define EADC_IS_DATA_VALID(eadc) (((eadc)->STATUS2 & EADC_STATUS2_AVALID_Msk) >> EADC_STATUS2_AVALID_Pos) /** * @brief Check all A/D sample module start of conversion overrun flags. * @param[in] eadc The pointer of the specified EADC module. * @retval 0 None of sample module event overrun flag is set to 1. * @retval 1 Any one of sample module event overrun flag is set to 1. * @details The STOVF bit (EADC_STATUS2[25]) will keep 1 when any one of sample module event overrun flag SPOVFn (EADC_OVSTS[n]) is set to 1. */ #define EADC_IS_SAMPLE_MODULE_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_STOVF_Msk) >> EADC_STATUS2_STOVF_Pos) /** * @brief Check all A/D interrupt flag overrun bits. * @param[in] eadc The pointer of the specified EADC module. * @retval 0 None of ADINT interrupt flag is overwritten to 1. * @retval 1 Any one of ADINT interrupt flag is overwritten to 1. * @details The ADOVIF bit (EADC_STATUS2[24]) will keep 1 when any one of ADINT interrupt flag ADOVIFn (EADC_STATUS2[11:8]) is overwritten to 1. */ #define EADC_IS_INT_FLAG_OV(eadc) (((eadc)->STATUS2 & EADC_STATUS2_ADOVIF_Msk) >> EADC_STATUS2_ADOVIF_Pos) /** * @brief Get the busy state of EADC. * @param[in] eadc The pointer of the specified EADC module. * @retval 0 Idle state. * @retval 1 Busy state. * @details This macro is used to read BUSY bit (EADC_STATUS2[23]) to get busy state. */ #define EADC_IS_BUSY(eadc) (((eadc)->STATUS2 & EADC_STATUS2_BUSY_Msk) >> EADC_STATUS2_BUSY_Pos) /** * @brief Configure the comparator 0 and enable it. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18. * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF. * @return None * @details For example, ADC_ENABLE_CMP0(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 0 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. */ #define EADC_ENABLE_CMP0(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[0] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\ EADC_CMP_ADCMPEN_Msk)) /** * @brief Configure the comparator 1 and enable it. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18. * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF. * @return None * @details For example, ADC_ENABLE_CMP1(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 1 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. */ #define EADC_ENABLE_CMP1(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[1] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\ EADC_CMP_ADCMPEN_Msk)) /** * @brief Configure the comparator 2 and enable it. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18. * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF. * @return None * @details For example, ADC_ENABLE_CMP2(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 2 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. */ #define EADC_ENABLE_CMP2(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[2] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\ EADC_CMP_ADCMPEN_Msk)) /** * @brief Configure the comparator 3 and enable it. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid value are from 0 to 18. * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 1~0xF. * @return None * @details For example, ADC_ENABLE_CMP3(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 3 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. */ #define EADC_ENABLE_CMP3(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[3] |=(((u32ModuleNum) << EADC_CMP_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP_CMPMCNT_Pos)|\ EADC_CMP_ADCMPEN_Msk)) /** * @brief Enable the compare window mode. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32CMP Specifies the compare register, valid value are 0 and 2. * @return None * @details ADCMPF0 (EADC_STATUS2[4]) will be set when both EADC_CMP0 and EADC_CMP1 compared condition matched. */ #define EADC_ENABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_CMPWEN_Msk) /** * @brief Disable the compare window mode. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32CMP Specifies the compare register, valid value are 0 and 2. * @return None * @details ADCMPF2 (EADC_STATUS2[6]) will be set when both EADC_CMP2 and EADC_CMP3 compared condition matched. */ #define EADC_DISABLE_CMP_WINDOW_MODE(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_CMPWEN_Msk) /** * @brief Enable the compare interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3. * @return None * @details If the compare function is enabled and the compare condition matches the setting of CMPCOND (EADC_CMPn[2], n=0~3) * and CMPMCNT (EADC_CMPn[11:8], n=0~3), ADCMPFn (EADC_STATUS2[7:4], n=0~3) will be asserted, in the meanwhile, * if ADCMPIE is set to 1, a compare interrupt request is generated. */ #define EADC_ENABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP_ADCMPIE_Msk) /** * @brief Disable the compare interrupt. * @param[in] eadc The pointer of the specified EADC module. * @param[in] u32CMP Specifies the compare register, valid value are from 0 to 3. * @return None * @details This macro is used to disable the compare interrupt. */ #define EADC_DISABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP_ADCMPIE_Msk) /** * @brief Disable comparator 0. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details This macro is used to disable comparator 0. */ #define EADC_DISABLE_CMP0(eadc) ((eadc)->CMP[0] = 0) /** * @brief Disable comparator 1. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details This macro is used to disable comparator 1. */ #define EADC_DISABLE_CMP1(eadc) ((eadc)->CMP[1] = 0) /** * @brief Disable comparator 2. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details This macro is used to disable comparator 2. */ #define EADC_DISABLE_CMP2(eadc) ((eadc)->CMP[2] = 0) /** * @brief Disable comparator 3. * @param[in] eadc The pointer of the specified EADC module. * @return None * @details This macro is used to disable comparator 3. */ #define EADC_DISABLE_CMP3(eadc) ((eadc)->CMP[3] = 0) /*---------------------------------------------------------------------------------------------------------*/ /* Define EADC functions prototype */ /*---------------------------------------------------------------------------------------------------------*/ void EADC_Open(EADC_T *eadc, uint32_t u32InputMode); void EADC_Close(EADC_T *eadc); void EADC_ConfigSampleModule(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerSource, uint32_t u32Channel); void EADC_SetTriggerDelayTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32TriggerDelayTime, uint32_t u32DelayClockDivider); void EADC_SetInternalSampleTime(EADC_T *eadc, uint32_t u32SampleTime); void EADC_SetExtendSampleTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32ExtendSampleTime); /*@}*/ /* end of group EADC_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group EADC_Driver */ /*@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif //__EADC_H__ /*** (C) COPYRIGHT 2013~2015 Nuvoton Technology Corp. ***/