File content as of revision 172:65be27845400:

/* mbed Microcontroller Library
 *******************************************************************************
 * Copyright (c) 2018, STMicroelectronics
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */

#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"
#include "PinNamesTypes.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    ALT0  = 0x100,
    ALT1  = 0x200,
    ALT2  = 0x300,
    ALT3  = 0x400
} ALTx;

typedef enum {
    PA_0  = 0x00,
    PA_0_ALT0 = PA_0 | ALT0,
    PA_0_ALT1 = PA_0 | ALT1,
    PA_1  = 0x01,
    PA_1_ALT0 = PA_1 | ALT0,
    PA_1_ALT1 = PA_1 | ALT1,
    PA_2  = 0x02,
    PA_2_ALT0 = PA_2 | ALT0,
    PA_2_ALT1 = PA_2 | ALT1,
    PA_3  = 0x03,
    PA_3_ALT0 = PA_3 | ALT0,
    PA_3_ALT1 = PA_3 | ALT1,
    PA_4  = 0x04,
    PA_4_ALT0 = PA_4 | ALT0,
    PA_5  = 0x05,
    PA_5_ALT0 = PA_5 | ALT0,
    PA_6  = 0x06,
    PA_6_ALT0 = PA_6 | ALT0,
    PA_7  = 0x07,
    PA_7_ALT0 = PA_7 | ALT0,
    PA_7_ALT1 = PA_7 | ALT1,
    PA_7_ALT2 = PA_7 | ALT2,
    PA_8  = 0x08,
    PA_9  = 0x09,
    PA_10 = 0x0A,
    PA_11 = 0x0B,
    PA_12 = 0x0C,
    PA_13 = 0x0D,
    PA_14 = 0x0E,
    PA_15 = 0x0F,
    PA_15_ALT0 = PA_15 | ALT0,

    PB_0  = 0x10,
    PB_0_ALT0 = PB_0 | ALT0,
    PB_0_ALT1 = PB_0 | ALT1,
    PB_1  = 0x11,
    PB_1_ALT0 = PB_1 | ALT0,
    PB_1_ALT1 = PB_1 | ALT1,
    PB_2  = 0x12,
    PB_3  = 0x13,
    PB_3_ALT0 = PB_3 | ALT0,
    PB_4  = 0x14,
    PB_4_ALT0 = PB_4 | ALT0,
    PB_4_ALT1 = PB_4 | ALT1,
    PB_5  = 0x15,
    PB_5_ALT0 = PB_5 | ALT0,
    PB_5_ALT1 = PB_5 | ALT1,
    PB_6  = 0x16,
    PB_7  = 0x17,
    PB_8  = 0x18,
    PB_8_ALT0 = PB_8 | ALT0,
    PB_8_ALT1 = PB_8 | ALT1,
    PB_9  = 0x19,
    PB_9_ALT0 = PB_9 | ALT0,
    PB_9_ALT1 = PB_9 | ALT1,
    PB_10 = 0x1A,
    PB_11 = 0x1B,
    PB_12 = 0x1C,
    PB_13 = 0x1D,
    PB_14 = 0x1E,
    PB_14_ALT0 = PB_14 | ALT0,
    PB_14_ALT1 = PB_14 | ALT1,
    PB_15 = 0x1F,
    PB_15_ALT0 = PB_15 | ALT0,
    PB_15_ALT1 = PB_15 | ALT1,

    PC_0  = 0x20,
    PC_0_ALT0 = PC_0 | ALT0,
    PC_0_ALT1 = PC_0 | ALT1,
    PC_1  = 0x21,
    PC_1_ALT0 = PC_1 | ALT0,
    PC_1_ALT1 = PC_1 | ALT1,
    PC_2  = 0x22,
    PC_2_ALT0 = PC_2 | ALT0,
    PC_2_ALT1 = PC_2 | ALT1,
    PC_3  = 0x23,
    PC_3_ALT0 = PC_3 | ALT0,
    PC_3_ALT1 = PC_3 | ALT1,
    PC_4  = 0x24,
    PC_4_ALT0 = PC_4 | ALT0,
    PC_5  = 0x25,
    PC_5_ALT0 = PC_5 | ALT0,
    PC_6  = 0x26,
    PC_6_ALT0 = PC_6 | ALT0,
    PC_7  = 0x27,
    PC_7_ALT0 = PC_7 | ALT0,
    PC_8  = 0x28,
    PC_8_ALT0 = PC_8 | ALT0,
    PC_9  = 0x29,
    PC_9_ALT0 = PC_9 | ALT0,
    PC_10 = 0x2A,
    PC_11 = 0x2B,
    PC_12 = 0x2C,
    PC_13 = 0x2D,
    PC_14 = 0x2E,
    PC_15 = 0x2F,

    PD_0  = 0x30,
    PD_1  = 0x31,
    PD_2  = 0x32,
    PD_3  = 0x33,
    PD_4  = 0x34,
    PD_5  = 0x35,
    PD_6  = 0x36,
    PD_7  = 0x37,
    PD_8  = 0x38,
    PD_9  = 0x39,
    PD_10 = 0x3A,
    PD_11 = 0x3B,
    PD_12 = 0x3C,
    PD_13 = 0x3D,
    PD_14 = 0x3E,
    PD_15 = 0x3F,

    PE_0  = 0x40,
    PE_1  = 0x41,
    PE_2  = 0x42,
    PE_3  = 0x43,
    PE_4  = 0x44,
    PE_5  = 0x45,
    PE_6  = 0x46,
    PE_7  = 0x47,
    PE_8  = 0x48,
    PE_9  = 0x49,
    PE_10 = 0x4A,
    PE_11 = 0x4B,
    PE_12 = 0x4C,
    PE_13 = 0x4D,
    PE_14 = 0x4E,
    PE_15 = 0x4F,

    PF_0  = 0x50,
    PF_1  = 0x51,
    PF_2  = 0x52,
    PF_3  = 0x53,
    PF_4  = 0x54,
    PF_5  = 0x55,
    PF_6  = 0x56,
    PF_7  = 0x57,
    PF_8  = 0x58,
    PF_9  = 0x59,
    PF_10 = 0x5A,
    PF_11 = 0x5B,
    PF_12 = 0x5C,
    PF_13 = 0x5D,
    PF_14 = 0x5E,
    PF_15 = 0x5F,

    PG_0  = 0x60,
    PG_1  = 0x61,
    PG_2  = 0x62,
    PG_3  = 0x63,
    PG_4  = 0x64,
    PG_5  = 0x65,
    PG_6  = 0x66,
    PG_7  = 0x67,
    PG_8  = 0x68,
    PG_9  = 0x69,
    PG_10 = 0x6A,
    PG_11 = 0x6B,
    PG_12 = 0x6C,
    PG_13 = 0x6D,
    PG_14 = 0x6E,
    PG_15 = 0x6F,

    PH_0  = 0x70,
    PH_1  = 0x71,

    // ADC internal channels
    ADC_TEMP = 0xF0,
    ADC_VREF = 0xF1,
    ADC_VBAT = 0xF2,

    // Arduino connector namings
    A0          = PA_3,
    A1          = PC_0,
    A2          = PC_3,
    A3          = PF_3,
    A4          = PF_5,
    A5          = PF_10,
    D0          = PG_9,
    D1          = PG_14,
    D2          = PF_15,
    D3          = PE_13,
    D4          = PF_14,
    D5          = PE_11,
    D6          = PE_9,
    D7          = PF_13,
    D8          = PF_12,
    D9          = PD_15,
    D10         = PD_14,
    D11         = STM32_D11_SPI_ETHERNET_PIN, /* config in targets.json file */
    D12         = PA_6,
    D13         = PA_5,
    D14         = PB_9,
    D15         = PB_8,

    // STDIO for console print
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
#else
    STDIO_UART_TX = PD_8,
#endif
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
#else
    STDIO_UART_RX = PD_9,
#endif

    // Generic signals namings
    LED1        = PB_0,  // LD1 = GREEN
    LED2        = PB_7,  // Blue
    LED3        = PB_14, // Red
    LED4        = PB_0,
    USER_BUTTON = PC_13,
    // Standardized button names
    BUTTON1 = USER_BUTTON,
    SERIAL_TX   = STDIO_UART_TX, // Virtual Com Port
    SERIAL_RX   = STDIO_UART_RX, // Virtual Com Port
    USBTX       = STDIO_UART_TX, // Virtual Com Port
    USBRX       = STDIO_UART_RX, // Virtual Com Port
    I2C_SCL     = D15,
    I2C_SDA     = D14,
    SPI_MOSI    = D11,
    SPI_MISO    = D12,
    SPI_SCK     = D13,
    SPI_CS      = D10,
    PWM_OUT     = D9,

    /**** USB pins ****/
    USB_OTG_FS_DM = PA_11,
    USB_OTG_FS_DP = PA_12,
    USB_OTG_FS_ID = PA_10,
    USB_OTG_FS_SOF = PA_8,
    USB_OTG_FS_VBUS = PA_9,
    USB_OTG_HS_DM = PB_14,
    USB_OTG_HS_DP = PB_15,
    USB_OTG_HS_ID = PB_12,
    USB_OTG_HS_SOF = PA_4,
    USB_OTG_HS_ULPI_CK = PA_5,
    USB_OTG_HS_ULPI_D0 = PA_3,
    USB_OTG_HS_ULPI_D1 = PB_0,
    USB_OTG_HS_ULPI_D2 = PB_1,
    USB_OTG_HS_ULPI_D3 = PB_10,
    USB_OTG_HS_ULPI_D4 = PB_11,
    USB_OTG_HS_ULPI_D5 = PB_12,
    USB_OTG_HS_ULPI_D6 = PB_13,
    USB_OTG_HS_ULPI_D7 = PB_5,
    USB_OTG_HS_ULPI_DIR = PC_2,
    USB_OTG_HS_ULPI_NXT = PC_3,
    USB_OTG_HS_ULPI_STP = PC_0,
    USB_OTG_HS_VBUS = PB_13,

    /**** ETHERNET pins ****/
    ETH_COL = PA_3,
    ETH_CRS = PA_0,
    ETH_CRS_DV = PA_7,
    ETH_MDC = PC_1,
    ETH_MDIO = PA_2,
    ETH_PPS_OUT = PG_8,
    ETH_PPS_OUT_ALT0 = PB_5,
    ETH_REF_CLK = PA_1,
    ETH_RXD0 = PC_4,
    ETH_RXD1 = PC_5,
    ETH_RXD2 = PB_0,
    ETH_RXD3 = PB_1,
    ETH_RX_CLK = PA_1,
    ETH_RX_DV = PA_7,
    ETH_RX_ER = PB_10,
    ETH_TXD0 = PB_12,
    ETH_TXD0_ALT0 = PG_13,
    ETH_TXD1 = PB_13,
    ETH_TXD1_ALT0 = PG_14,
    ETH_TXD2 = PC_2,
    ETH_TXD3 = PE_2,
    ETH_TXD3_ALT0 = PB_8,
    ETH_TX_CLK = PC_3,
    ETH_TX_EN = PB_11,
    ETH_TX_EN_ALT0 = PG_11,

    /**** OSCILLATOR pins ****/
    RCC_OSC32_IN = PC_14,
    RCC_OSC32_OUT = PC_15,
    RCC_OSC_IN = PH_0,
    RCC_OSC_OUT = PH_1,

    /**** DEBUG pins ****/
    SYS_JTCK_SWCLK = PA_14,
    SYS_JTDI = PA_15,
    SYS_JTDO_SWO = PB_3,
    SYS_JTMS_SWDIO = PA_13,
    SYS_JTRST = PB_4,
    SYS_TRACECLK = PE_2,
    SYS_TRACED0 = PE_3,
    SYS_TRACED0_ALT0 = PC_1,
    SYS_TRACED0_ALT1 = PG_13,
    SYS_TRACED1 = PE_4,
    SYS_TRACED1_ALT0 = PC_8,
    SYS_TRACED1_ALT1 = PG_14,
    SYS_TRACED2 = PE_5,
    SYS_TRACED2_ALT0 = PD_2,
    SYS_TRACED3 = PE_6,
    SYS_TRACED3_ALT0 = PC_12,
    SYS_WKUP1 = PA_0,
    SYS_WKUP2 = PA_2,
    SYS_WKUP3 = PC_1,
    SYS_WKUP4 = PC_13,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

#ifdef __cplusplus
}
#endif

#endif