The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_DISCO_L053C8/TOOLCHAIN_IAR/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 172:65be27845400
- Parent:
- 171:3a7713b1edbc
File content as of revision 172:65be27845400:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2018, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PH_0 = 0x70, PH_1 = 0x71, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VLCD = 0xF2, // Arduino connector namings // Note: The Arduino connector is not present on this board. // We keep these definitions for compatibility with Nucleo code examples. A0 = PA_1, A1 = PA_2, A2 = PA_3, A3 = PA_4, A4 = PB_0, A5 = PB_1, D0 = PA_10, D1 = PA_9, D2 = PA_8, D3 = PA_6, D4 = PA_13, D5 = PA_7, D6 = PB_11, D7 = PC_13, D8 = PC_14, D9 = PA_15, D10 = PA_5, D11 = PB_15, D12 = PB_14, D13 = PB_13, D14 = PB_9, D15 = PB_8, // STDIO for console print #ifdef MBED_CONF_TARGET_STDIO_UART_TX STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX, #else STDIO_UART_TX = PA_9, #endif #ifdef MBED_CONF_TARGET_STDIO_UART_RX STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX, #else STDIO_UART_RX = PA_10, #endif // Generic signals namings LED1 = PB_4, LED2 = PA_5, LED3 = PB_4, LED4 = PA_5, USER_BUTTON = PA_0, // Standardized button names BUTTON1 = USER_BUTTON, SERIAL_TX = STDIO_UART_TX, SERIAL_RX = STDIO_UART_RX, USBTX = STDIO_UART_TX, USBRX = STDIO_UART_RX, I2C_SCL = PB_8, I2C_SDA = PB_9, SPI_MOSI = PB_15, SPI_MISO = PB_14, SPI_SCK = PB_13, SPI_CS = PB_12, PWM_OUT = PB_11, /**** USB pins ****/ USB_DM = PA_11, USB_DP = PA_12, USB_NOE = PA_13, /**** OSCILLATOR pins ****/ RCC_OSC32_IN = PC_14, RCC_OSC32_OUT = PC_15, RCC_OSC_IN = PH_0, RCC_OSC_OUT = PH_1, /**** DEBUG pins ****/ SYS_PVD_IN = PB_7, SYS_SWCLK = PA_14, SYS_SWDIO = PA_13, SYS_VREF_OUT_PB0 = PB_0, SYS_VREF_OUT_PB1 = PB_1, SYS_WKUP1 = PA_0, SYS_WKUP2 = PC_13, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif