The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_VBLUNO51/TOOLCHAIN_ARM_STD/hci_transport_config.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
- Parent:
- TARGET_NRF51_DK/TARGET_NORDIC/TARGET_NRF5x/TARGET_SDK_11/libraries/hci/config/hci_transport_config.h@ 169:a7c7b631e539
File content as of revision 171:3a7713b1edbc:
/* * Copyright (c) 2013 Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA * integrated circuit in a product or a software update for such product, must reproduce * the above copyright notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be * used to endorse or promote products derived from this software without specific prior * written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary or object form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * * @brief Definition of HCI Transport Layer configurable parameters */ #ifndef HCI_TRANSPORT_CFG_H__ #define HCI_TRANSPORT_CFG_H__ /** This section covers configurable parameters for the HCI Transport SLIP layer. */ #define HCI_SLIP_UART_RX_PIN_NUMBER 1 /**< Defines the UART RX pin number. The default pin for the board is chosen, but can be overwritten. */ #define HCI_SLIP_UART_TX_PIN_NUMBER 2 /**< Defines the UART TX pin number. The default pin for the board is chosen, but can be overwritten. */ #define HCI_SLIP_UART_RTS_PIN_NUMBER 3 /**< Defines the UART RTS pin number. The default pin for the board is chosen, but can be overwritten. */ #define HCI_SLIP_UART_CTS_PIN_NUMBER 4 /**< Defines the UART CTS pin number. The default pin for the board is chosen, but can be overwritten. */ #define HCI_SLIP_UART_MODE APP_UART_FLOW_CONTROL_ENABLED /**< Defines the UART mode to be used. Use UART Low Power with Flow Control - Valid values are defined in \ref app_uart_flow_control_t. For further information on the UART Low Power mode, please refer to: \ref app_uart . */ #define HCI_SLIP_UART_BAUDRATE UART_BAUDRATE_BAUDRATE_Baud38400 /**< Defines the UART Baud rate. Default is 38400 baud. */ /** This section covers configurable parameters for the HCI Transport layer that are used for calculating correct value for the retransmission timer timeout. */ #define MAX_PACKET_SIZE_IN_BITS 8000u /**< Maximum size of a single application packet in bits. */ #define USED_BAUD_RATE 38400u /**< The used uart baudrate. */ #endif // HCI_TRANSPORT_CFG_H__ /** @} */