mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_IAR/stm32l4xx_ll_rcc.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
- Parent:
- TARGET_DISCO_L496AG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_ll_rcc.h@ 165:d1b4690b3f8b
File content as of revision 171:3a7713b1edbc:
/**
******************************************************************************
* @file stm32l4xx_ll_rcc.h
* @author MCD Application Team
* @brief Header file of RCC LL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_LL_RCC_H
#define __STM32L4xx_LL_RCC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
#if defined(RCC)
/** @defgroup RCC_LL RCC
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup RCC_LL_Private_Variables RCC Private Variables
* @{
*/
#if defined(RCC_CCIPR2_PLLSAI2DIVR)
static const uint8_t aRCC_PLLSAI2DIVRPrescTable[4] = {2, 4, 8, 16};
#endif /* RCC_CCIPR2_PLLSAI2DIVR */
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RCC_LL_Private_Constants RCC Private Constants
* @{
*/
/* Defines used to perform offsets*/
/* Offset used to access to RCC_CCIPR and RCC_CCIPR2 registers */
#define RCC_OFFSET_CCIPR 0U
#define RCC_OFFSET_CCIPR2 0x14U
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_Private_Macros RCC Private Macros
* @{
*/
/**
* @}
*/
#endif /*USE_FULL_LL_DRIVER*/
/* Exported types ------------------------------------------------------------*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_Exported_Types RCC Exported Types
* @{
*/
/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
* @{
*/
/**
* @brief RCC Clocks Frequency Structure
*/
typedef struct
{
uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */
} LL_RCC_ClocksTypeDef;
/**
* @}
*/
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
* @{
*/
/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
* @brief Defines used to adapt values of different oscillators
* @note These values could be modified in the user environment according to
* HW set-up.
* @{
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */
#endif /* HSI_VALUE */
#if !defined (LSE_VALUE)
#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
#endif /* LSI_VALUE */
#if defined(RCC_HSI48_SUPPORT)
#if !defined (HSI48_VALUE)
#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */
#endif /* HSI48_VALUE */
#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
* @brief Flags defines which can be used with LL_RCC_WriteReg function
* @{
*/
#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */
#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */
#define LL_RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC /*!< MSI Ready Interrupt Clear */
#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */
#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */
#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */
#endif /* RCC_HSI48_SUPPORT */
#define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */
#if defined(RCC_PLLSAI2_SUPPORT)
#define LL_RCC_CICR_PLLSAI2RDYC RCC_CICR_PLLSAI2RDYC /*!< PLLSAI2 Ready Interrupt Clear */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */
#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */
/**
* @}
*/
/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_RCC_ReadReg function
* @{
*/
#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */
#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */
#define LL_RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */
#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */
#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */
#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
#endif /* RCC_HSI48_SUPPORT */
#define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */
#if defined(RCC_PLLSAI2_SUPPORT)
#define LL_RCC_CIFR_PLLSAI2RDYF RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */
#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */
#define LL_RCC_CSR_FWRSTF RCC_CSR_FWRSTF /*!< Firewall reset flag */
#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */
#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */
/**
* @}
*/
/** @defgroup RCC_LL_EC_IT IT Defines
* @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
* @{
*/
#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */
#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */
#define LL_RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE /*!< MSI Ready Interrupt Enable */
#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */
#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */
#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */
#endif /* RCC_HSI48_SUPPORT */
#define LL_RCC_CIER_PLLSAI1RDYIE RCC_CIER_PLLSAI1RDYIE /*!< PLLSAI1 Ready Interrupt Enable */
#if defined(RCC_PLLSAI2_SUPPORT)
#define LL_RCC_CIER_PLLSAI2RDYIE RCC_CIER_PLLSAI2RDYIE /*!< PLLSAI2 Ready Interrupt Enable */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */
/**
* @}
*/
/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
* @{
*/
#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */
#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */
#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */
#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
/**
* @}
*/
/** @defgroup RCC_LL_EC_MSIRANGE MSI clock ranges
* @{
*/
#define LL_RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */
#define LL_RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */
#define LL_RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */
#define LL_RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */
#define LL_RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */
#define LL_RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */
#define LL_RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */
#define LL_RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */
#define LL_RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */
#define LL_RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */
#define LL_RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */
#define LL_RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */
/**
* @}
*/
/** @defgroup RCC_LL_EC_MSISRANGE MSI range after Standby mode
* @{
*/
#define LL_RCC_MSISRANGE_4 RCC_CSR_MSISRANGE_1 /*!< MSI = 1 MHz */
#define LL_RCC_MSISRANGE_5 RCC_CSR_MSISRANGE_2 /*!< MSI = 2 MHz */
#define LL_RCC_MSISRANGE_6 RCC_CSR_MSISRANGE_4 /*!< MSI = 4 MHz */
#define LL_RCC_MSISRANGE_7 RCC_CSR_MSISRANGE_8 /*!< MSI = 8 MHz */
/**
* @}
*/
/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection
* @{
*/
#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */
#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */
/**
* @}
*/
/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
* @{
*/
#define LL_RCC_SYS_CLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
/**
* @}
*/
/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
* @{
*/
#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
/**
* @}
*/
/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
* @{
*/
#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
/**
* @}
*/
/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
* @{
*/
#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
/**
* @}
*/
/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2)
* @{
*/
#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */
#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */
#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */
#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */
#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */
/**
* @}
*/
/** @defgroup RCC_LL_EC_STOP_WAKEUPCLOCK Wakeup from Stop and CSS backup clock selection
* @{
*/
#define LL_RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */
#define LL_RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */
/**
* @}
*/
/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection
* @{
*/
#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */
#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */
#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source */
#endif /* RCC_HSI48_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler
* @{
*/
#define LL_RCC_MCO1_DIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */
#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */
#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */
#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */
#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
* @{
*/
#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection
* @{
*/
#define LL_RCC_USART1_CLKSOURCE_PCLK2 (RCC_CCIPR_USART1SEL << 16U) /*!< PCLK2 clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */
#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */
#define LL_RCC_USART2_CLKSOURCE_PCLK1 (RCC_CCIPR_USART2SEL << 16U) /*!< PCLK1 clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */
#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */
#if defined(RCC_CCIPR_USART3SEL)
#define LL_RCC_USART3_CLKSOURCE_PCLK1 (RCC_CCIPR_USART3SEL << 16U) /*!< PCLK1 clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */
#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */
#endif /* RCC_CCIPR_USART3SEL */
/**
* @}
*/
#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL)
/** @defgroup RCC_LL_EC_UART4_CLKSOURCE Peripheral UART clock source selection
* @{
*/
#if defined(RCC_CCIPR_UART4SEL)
#define LL_RCC_UART4_CLKSOURCE_PCLK1 (RCC_CCIPR_UART4SEL << 16U) /*!< PCLK1 clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_0) /*!< SYSCLK clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_HSI ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_1) /*!< HSI clock used as UART4 clock source */
#define LL_RCC_UART4_CLKSOURCE_LSE ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL) /*!< LSE clock used as UART4 clock source */
#endif /* RCC_CCIPR_UART4SEL */
#if defined(RCC_CCIPR_UART5SEL)
#define LL_RCC_UART5_CLKSOURCE_PCLK1 (RCC_CCIPR_UART5SEL << 16U) /*!< PCLK1 clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_0) /*!< SYSCLK clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_HSI ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_1) /*!< HSI clock used as UART5 clock source */
#define LL_RCC_UART5_CLKSOURCE_LSE ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL) /*!< LSE clock used as UART5 clock source */
#endif /* RCC_CCIPR_UART5SEL */
/**
* @}
*/
#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */
/** @defgroup RCC_LL_EC_LPUART1_CLKSOURCE Peripheral LPUART clock source selection
* @{
*/
#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock used as LPUART1 clock source */
#define LL_RCC_LPUART1_CLKSOURCE_LSE RCC_CCIPR_LPUART1SEL /*!< LSE clock used as LPUART1 clock source */
/**
* @}
*/
/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection
* @{
*/
#define LL_RCC_I2C1_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C1 clock source */
#define LL_RCC_I2C1_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_0 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */
#define LL_RCC_I2C1_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_1 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */
#if defined(RCC_CCIPR_I2C2SEL)
#define LL_RCC_I2C2_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C2 clock source */
#define LL_RCC_I2C2_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_0 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */
#define LL_RCC_I2C2_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_1 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */
#endif /* RCC_CCIPR_I2C2SEL */
#define LL_RCC_I2C3_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C3 clock source */
#define LL_RCC_I2C3_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_0 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */
#define LL_RCC_I2C3_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_1 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */
#if defined(RCC_CCIPR2_I2C4SEL)
#define LL_RCC_I2C4_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C4 clock source */
#define LL_RCC_I2C4_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_0 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */
#define LL_RCC_I2C4_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_1 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */
#endif /* RCC_CCIPR2_I2C4SEL */
/**
* @}
*/
/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection
* @{
*/
#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM1SEL /*!< PCLK1 clock used as LPTIM1 clock source */
#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI clock used as LPTIM1 clock source */
#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI clock used as LPTIM1 clock source */
#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE clock used as LPTIM1 clock source */
#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM2SEL /*!< PCLK1 clock used as LPTIM2 clock source */
#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI clock used as LPTIM2 clock source */
#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI clock used as LPTIM2 clock source */
#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE clock used as LPTIM2 clock source */
/**
* @}
*/
/** @defgroup RCC_LL_EC_SAI1_CLKSOURCE Peripheral SAI clock source selection
* @{
*/
#if defined(RCC_CCIPR2_SAI1SEL)
#define LL_RCC_SAI1_CLKSOURCE_PLL (RCC_CCIPR2_SAI1SEL << 16U) /*!< PLL clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_0) /*!< PLLSAI1 clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_1) /*!< PLLSAI2 clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_HSI ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_2) /*!< HSI clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PIN ((RCC_CCIPR2_SAI1SEL << 16U) | (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0)) /*!< External input clock used as SAI1 clock source */
#else
#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI1SEL /*!< PLLSAI1 clock used as SAI1 clock source */
#if defined(RCC_PLLSAI2_SUPPORT)
#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI1 clock source */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_SAI1_CLKSOURCE_PLL (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_1 >> 16U)) /*!< PLL clock used as SAI1 clock source */
#define LL_RCC_SAI1_CLKSOURCE_PIN (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL >> 16U)) /*!< External input clock used as SAI1 clock source */
#endif /* RCC_CCIPR2_SAI1SEL */
#if defined(RCC_CCIPR2_SAI2SEL)
#define LL_RCC_SAI2_CLKSOURCE_PLL (RCC_CCIPR2_SAI2SEL << 16U) /*!< PLL clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_0) /*!< PLLSAI1 clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_1) /*!< PLLSAI2 clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_HSI ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_2) /*!< HSI clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PIN ((RCC_CCIPR2_SAI2SEL << 16U) | (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0)) /*!< External input clock used as SAI2 clock source */
#elif defined(RCC_CCIPR_SAI2SEL)
#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI2SEL /*!< PLLSAI1 clock used as SAI2 clock source */
#if defined(RCC_PLLSAI2_SUPPORT)
#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI2 clock source */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_SAI2_CLKSOURCE_PLL (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_1 >> 16U)) /*!< PLL clock used as SAI2 clock source */
#define LL_RCC_SAI2_CLKSOURCE_PIN (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL >> 16U)) /*!< External input clock used as SAI2 clock source */
#endif /* RCC_CCIPR2_SAI2SEL */
/**
* @}
*/
#if defined(RCC_CCIPR2_SDMMCSEL)
/** @defgroup RCC_LL_EC_SDMMC1_KERNELCLKSOURCE Peripheral SDMMC kernel clock source selection
* @{
*/
#define LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK 0x00000000U /*!< 48MHz clock from internal multiplexor used as SDMMC1 clock source */
#define LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLLSAI3CLK clock used as SDMMC1 clock source */
/**
* @}
*/
#endif /* RCC_CCIPR2_SDMMCSEL */
/** @defgroup RCC_LL_EC_SDMMC1_CLKSOURCE Peripheral SDMMC clock source selection
* @{
*/
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_SDMMC1_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as SDMMC1 clock source */
#else
#define LL_RCC_SDMMC1_CLKSOURCE_NONE 0x00000000U /*!< No clock used as SDMMC1 clock source */
#endif
#define LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as SDMMC1 clock source */
#define LL_RCC_SDMMC1_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as SDMMC1 clock source */
#define LL_RCC_SDMMC1_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as SDMMC1 clock source */
/**
* @}
*/
/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection
* @{
*/
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_RNG_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as RNG clock source */
#else
#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock source */
#endif
#define LL_RCC_RNG_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as RNG clock source */
#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as RNG clock source */
#define LL_RCC_RNG_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as RNG clock source */
/**
* @}
*/
#if defined(USB_OTG_FS) || defined(USB)
/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
* @{
*/
#if defined(RCC_HSI48_SUPPORT)
#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */
#else
#define LL_RCC_USB_CLKSOURCE_NONE 0x00000000U /*!< No clock used as USB clock source */
#endif
#define LL_RCC_USB_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as USB clock source */
#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as USB clock source */
#define LL_RCC_USB_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as USB clock source */
/**
* @}
*/
#endif /* USB_OTG_FS || USB */
/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection
* @{
*/
#define LL_RCC_ADC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as ADC clock source */
#define LL_RCC_ADC_CLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 /*!< PLLSAI1 clock used as ADC clock source */
#if defined(RCC_PLLSAI2_SUPPORT) && !defined(LTDC)
#define LL_RCC_ADC_CLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 /*!< PLLSAI2 clock used as ADC clock source */
#endif /* RCC_PLLSAI2_SUPPORT */
#define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK clock used as ADC clock source */
/**
* @}
*/
#if defined(SWPMI1)
/** @defgroup RCC_LL_EC_SWPMI1_CLKSOURCE Peripheral SWPMI1 clock source selection
* @{
*/
#define LL_RCC_SWPMI1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 used as SWPMI1 clock source */
#define LL_RCC_SWPMI1_CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL /*!< HSI used as SWPMI1 clock source */
/**
* @}
*/
#endif /* SWPMI1 */
#if defined(DFSDM1_Channel0)
#if defined(RCC_CCIPR2_ADFSDM1SEL)
/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM1 Audio clock source selection
* @{
*/
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 0x00000000U /*!< SAI1 clock used as DFSDM1 Audio clock */
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 /*!< HSI clock used as DFSDM1 Audio clock */
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 /*!< MSI clock used as DFSDM1 Audio clock */
/**
* @}
*/
#endif /* RCC_CCIPR2_ADFSDM1SEL */
/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM1 clock source selection
* @{
*/
#if defined(RCC_CCIPR2_DFSDM1SEL)
#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */
#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */
#else
#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */
#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */
#endif /* RCC_CCIPR2_DFSDM1SEL */
/**
* @}
*/
#endif /* DFSDM1_Channel0 */
#if defined(DSI)
/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection
* @{
*/
#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */
#define LL_RCC_DSI_CLKSOURCE_PLL RCC_CCIPR2_DSISEL /*!< PLL clock used as DSI byte lane clock source */
/**
* @}
*/
#endif /* DSI */
#if defined(LTDC)
/** @defgroup RCC_LL_EC_LTDC_CLKSOURCE Peripheral LTDC clock source selection
* @{
*/
#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2 0x00000000U /*!< PLLSAI2DIVR divided by 2 used as LTDC clock source */
#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2DIVR divided by 4 used as LTDC clock source */
#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2DIVR divided by 8 used as LTDC clock source */
#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16 RCC_CCIPR2_PLLSAI2DIVR /*!< PLLSAI2DIVR divided by 16 used as LTDC clock source */
/**
* @}
*/
#endif /* LTDC */
#if defined(OCTOSPI1)
/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source
* @{
*/
#define LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as OctoSPI clock source */
#define LL_RCC_OCTOSPI_CLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 /*!< MSI used as OctoSPI clock source */
#define LL_RCC_OCTOSPI_CLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 /*!< PLL used as OctoSPI clock source */
/**
* @}
*/
#endif /* OCTOSPI1 */
/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source
* @{
*/
#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */
#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */
#if defined(RCC_CCIPR_USART3SEL)
#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */
#endif /* RCC_CCIPR_USART3SEL */
/**
* @}
*/
#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL)
/** @defgroup RCC_LL_EC_UART4 Peripheral UART get clock source
* @{
*/
#if defined(RCC_CCIPR_UART4SEL)
#define LL_RCC_UART4_CLKSOURCE RCC_CCIPR_UART4SEL /*!< UART4 Clock source selection */
#endif /* RCC_CCIPR_UART4SEL */
#if defined(RCC_CCIPR_UART5SEL)
#define LL_RCC_UART5_CLKSOURCE RCC_CCIPR_UART5SEL /*!< UART5 Clock source selection */
#endif /* RCC_CCIPR_UART5SEL */
/**
* @}
*/
#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */
/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source
* @{
*/
#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */
/**
* @}
*/
/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source
* @{
*/
#define LL_RCC_I2C1_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL >> RCC_CCIPR_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */
#if defined(RCC_CCIPR_I2C2SEL)
#define LL_RCC_I2C2_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL >> RCC_CCIPR_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */
#endif /* RCC_CCIPR_I2C2SEL */
#define LL_RCC_I2C3_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL >> RCC_CCIPR_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */
#if defined(RCC_CCIPR2_I2C4SEL)
#define LL_RCC_I2C4_CLKSOURCE ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */
#endif /* RCC_CCIPR2_I2C4SEL */
/**
* @}
*/
/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source
* @{
*/
#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM1 Clock source selection */
#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */
/**
* @}
*/
/** @defgroup RCC_LL_EC_SAI1 Peripheral SAI get clock source
* @{
*/
#if defined(RCC_CCIPR2_SAI1SEL)
#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR2_SAI1SEL /*!< SAI1 Clock source selection */
#else
#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR_SAI1SEL /*!< SAI1 Clock source selection */
#endif /* RCC_CCIPR2_SAI1SEL */
#if defined(RCC_CCIPR2_SAI2SEL)
#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR2_SAI2SEL /*!< SAI2 Clock source selection */
#elif defined(RCC_CCIPR_SAI2SEL)
#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR_SAI2SEL /*!< SAI2 Clock source selection */
#endif /* RCC_CCIPR2_SAI2SEL */
/**
* @}
*/
#if defined(RCC_CCIPR2_SDMMCSEL)
/** @defgroup RCC_LL_EC_SDMMC1_KERNEL Peripheral SDMMC get kernel clock source
* @{
*/
#define LL_RCC_SDMMC1_KERNELCLKSOURCE RCC_CCIPR2_SDMMCSEL /*!< SDMMC1 Kernel Clock source selection */
/**
* @}
*/
#endif /* RCC_CCIPR2_SDMMCSEL */
/** @defgroup RCC_LL_EC_SDMMC1 Peripheral SDMMC get clock source
* @{
*/
#define LL_RCC_SDMMC1_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< SDMMC1 Clock source selection */
/**
* @}
*/
/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source
* @{
*/
#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< RNG Clock source selection */
/**
* @}
*/
#if defined(USB_OTG_FS) || defined(USB)
/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
* @{
*/
#define LL_RCC_USB_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< USB Clock source selection */
/**
* @}
*/
#endif /* USB_OTG_FS || USB */
/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source
* @{
*/
#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */
/**
* @}
*/
#if defined(SWPMI1)
/** @defgroup RCC_LL_EC_SWPMI1 Peripheral SWPMI1 get clock source
* @{
*/
#define LL_RCC_SWPMI1_CLKSOURCE RCC_CCIPR_SWPMI1SEL /*!< SWPMI1 Clock source selection */
/**
* @}
*/
#endif /* SWPMI1 */
#if defined(DFSDM1_Channel0)
#if defined(RCC_CCIPR2_ADFSDM1SEL)
/** @defgroup RCC_LL_EC_DFSDM1_AUDIO Peripheral DFSDM1 Audio get clock source
* @{
*/
#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_CCIPR2_ADFSDM1SEL /* DFSDM1 Audio Clock source selection */
/**
* @}
*/
#endif /* RCC_CCIPR2_ADFSDM1SEL */
/** @defgroup RCC_LL_EC_DFSDM1 Peripheral DFSDM1 get clock source
* @{
*/
#if defined(RCC_CCIPR2_DFSDM1SEL)
#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR2_DFSDM1SEL /*!< DFSDM1 Clock source selection */
#else
#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR_DFSDM1SEL /*!< DFSDM1 Clock source selection */
#endif /* RCC_CCIPR2_DFSDM1SEL */
/**
* @}
*/
#endif /* DFSDM1_Channel0 */
#if defined(DSI)
/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source
* @{
*/
#define LL_RCC_DSI_CLKSOURCE RCC_CCIPR2_DSISEL /*!< DSI Clock source selection */
/**
* @}
*/
#endif /* DSI */
#if defined(LTDC)
/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source
* @{
*/
#define LL_RCC_LTDC_CLKSOURCE RCC_CCIPR2_PLLSAI2DIVR /*!< LTDC Clock source selection */
/**
* @}
*/
#endif /* LTDC */
#if defined(OCTOSPI1)
/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source
* @{
*/
#define LL_RCC_OCTOSPI_CLKSOURCE RCC_CCIPR2_OSPISEL /*!< OctoSPI Clock source selection */
/**
* @}
*/
#endif /* OCTOSPI1 */
/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
* @{
*/
#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLSAI1 and PLLSAI2 entry clock source
* @{
*/
#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */
#define LL_RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */
#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */
#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor
* @{
*/
#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< Main PLL division factor for PLLM input by 1 */
#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 2 */
#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 3 */
#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 4 */
#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 5 */
#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 6 */
#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 7 */
#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 8 */
#if defined(RCC_PLLM_DIV_1_16_SUPPORT)
#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3) /*!< Main PLL division factor for PLLM input by 9 */
#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 10 */
#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 11 */
#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 12 */
#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 13 */
#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 14 */
#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 15 */
#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 16 */
#endif /* RCC_PLLM_DIV_1_16_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR)
* @{
*/
#define LL_RCC_PLLR_DIV_2 0x00000000U /*!< Main PLL division factor for PLLCLK (system clock) by 2 */
#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */
#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */
#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP)
* @{
*/
#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 2 */
#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 3 */
#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 4 */
#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 5 */
#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 6 */
#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 7 */
#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 8 */
#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 9 */
#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 10 */
#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 11 */
#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 12 */
#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 13 */
#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 14 */
#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 15 */
#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLPDIV_4) /*!< Main PLL division factor for PLLP output by 16 */
#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 17 */
#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 18 */
#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 19 */
#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 20 */
#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 21 */
#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 22 */
#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 23 */
#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 24 */
#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 25 */
#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 26 */
#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 27 */
#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 28 */
#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 29 */
#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 30 */
#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 31 */
#else
#define LL_RCC_PLLP_DIV_7 0x00000000U /*!< Main PLL division factor for PLLP output by 7 */
#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP) /*!< Main PLL division factor for PLLP output by 17 */
#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ)
* @{
*/
#define LL_RCC_PLLQ_DIV_2 0x00000000U /*!< Main PLL division factor for PLLQ output by 2 */
#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */
#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */
#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */
/**
* @}
*/
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/** @defgroup RCC_LL_EC_PLLSAI1M PLLSAI1 division factor (PLLSAI1M)
* @{
*/
#define LL_RCC_PLLSAI1M_DIV_1 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1M input by 1 */
#define LL_RCC_PLLSAI1M_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 2 */
#define LL_RCC_PLLSAI1M_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 3 */
#define LL_RCC_PLLSAI1M_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 4 */
#define LL_RCC_PLLSAI1M_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 5 */
#define LL_RCC_PLLSAI1M_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 6 */
#define LL_RCC_PLLSAI1M_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 7 */
#define LL_RCC_PLLSAI1M_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 8 */
#define LL_RCC_PLLSAI1M_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1M_3) /*!< PLLSAI1 division factor for PLLSAI1M input by 9 */
#define LL_RCC_PLLSAI1M_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 10 */
#define LL_RCC_PLLSAI1M_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 11 */
#define LL_RCC_PLLSAI1M_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 12 */
#define LL_RCC_PLLSAI1M_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 13 */
#define LL_RCC_PLLSAI1M_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 14 */
#define LL_RCC_PLLSAI1M_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 15 */
#define LL_RCC_PLLSAI1M_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 16 */
/**
* @}
*/
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
/** @defgroup RCC_LL_EC_PLLSAI1Q PLLSAI1 division factor (PLLSAI1Q)
* @{
*/
#define LL_RCC_PLLSAI1Q_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1Q output by 2 */
#define LL_RCC_PLLSAI1Q_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1Q_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 4 */
#define LL_RCC_PLLSAI1Q_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1Q_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 6 */
#define LL_RCC_PLLSAI1Q_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1Q) /*!< PLLSAI1 division factor for PLLSAI1Q output by 8 */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLSAI1P PLLSAI1 division factor (PLLSAI1P)
* @{
*/
#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
#define LL_RCC_PLLSAI1P_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 2 */
#define LL_RCC_PLLSAI1P_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 3 */
#define LL_RCC_PLLSAI1P_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 4 */
#define LL_RCC_PLLSAI1P_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 5 */
#define LL_RCC_PLLSAI1P_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 6 */
#define LL_RCC_PLLSAI1P_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */
#define LL_RCC_PLLSAI1P_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 8 */
#define LL_RCC_PLLSAI1P_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 9 */
#define LL_RCC_PLLSAI1P_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 10 */
#define LL_RCC_PLLSAI1P_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 1 */
#define LL_RCC_PLLSAI1P_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 12 */
#define LL_RCC_PLLSAI1P_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 13 */
#define LL_RCC_PLLSAI1P_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 14 */
#define LL_RCC_PLLSAI1P_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 15 */
#define LL_RCC_PLLSAI1P_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4) /*!< PLLSAI1 division factor for PLLSAI1P output by 16 */
#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */
#define LL_RCC_PLLSAI1P_DIV_18 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 18 */
#define LL_RCC_PLLSAI1P_DIV_19 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 19 */
#define LL_RCC_PLLSAI1P_DIV_20 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 20 */
#define LL_RCC_PLLSAI1P_DIV_21 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division fctor for PLLSAI1P output by 21 */
#define LL_RCC_PLLSAI1P_DIV_22 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 22 */
#define LL_RCC_PLLSAI1P_DIV_23 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 23 */
#define LL_RCC_PLLSAI1P_DIV_24 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 24 */
#define LL_RCC_PLLSAI1P_DIV_25 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 25 */
#define LL_RCC_PLLSAI1P_DIV_26 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 26 */
#define LL_RCC_PLLSAI1P_DIV_27 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 27 */
#define LL_RCC_PLLSAI1P_DIV_28 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 28 */
#define LL_RCC_PLLSAI1P_DIV_29 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 29 */
#define LL_RCC_PLLSAI1P_DIV_30 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 30 */
#define LL_RCC_PLLSAI1P_DIV_31 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */
#else
#define LL_RCC_PLLSAI1P_DIV_7 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */
#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1P) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */
#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLSAI1R PLLSAI1 division factor (PLLSAI1R)
* @{
*/
#define LL_RCC_PLLSAI1R_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1R output by 2 */
#define LL_RCC_PLLSAI1R_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1R_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 4 */
#define LL_RCC_PLLSAI1R_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1R_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 6 */
#define LL_RCC_PLLSAI1R_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1R) /*!< PLLSAI1 division factor for PLLSAI1R output by 8 */
/**
* @}
*/
#if defined(RCC_PLLSAI2_SUPPORT)
#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
/** @defgroup RCC_LL_EC_PLLSAI2M PLLSAI1 division factor (PLLSAI2M)
* @{
*/
#define LL_RCC_PLLSAI2M_DIV_1 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2M input by 1 */
#define LL_RCC_PLLSAI2M_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 2 */
#define LL_RCC_PLLSAI2M_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 3 */
#define LL_RCC_PLLSAI2M_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 4 */
#define LL_RCC_PLLSAI2M_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 5 */
#define LL_RCC_PLLSAI2M_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 6 */
#define LL_RCC_PLLSAI2M_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 7 */
#define LL_RCC_PLLSAI2M_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 8 */
#define LL_RCC_PLLSAI2M_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2M_3) /*!< PLLSAI2 division factor for PLLSAI2M input by 9 */
#define LL_RCC_PLLSAI2M_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 10 */
#define LL_RCC_PLLSAI2M_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 11 */
#define LL_RCC_PLLSAI2M_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 12 */
#define LL_RCC_PLLSAI2M_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 13 */
#define LL_RCC_PLLSAI2M_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 14 */
#define LL_RCC_PLLSAI2M_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 15 */
#define LL_RCC_PLLSAI2M_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 16 */
/**
* @}
*/
#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
/** @defgroup RCC_LL_EC_PLLSAI2Q PLLSAI2 division factor (PLLSAI2Q)
* @{
*/
#define LL_RCC_PLLSAI2Q_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2Q output by 2 */
#define LL_RCC_PLLSAI2Q_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2Q_0) /*!< PLLSAI2 division factor for PLLSAI2Q output by 4 */
#define LL_RCC_PLLSAI2Q_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2Q_1) /*!< PLLSAI2 division factor for PLLSAI2Q output by 6 */
#define LL_RCC_PLLSAI2Q_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2Q) /*!< PLLSAI2 division factor for PLLSAI2Q output by 8 */
/**
* @}
*/
#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
/** @defgroup RCC_LL_EC_PLLSAI2P PLLSAI2 division factor (PLLSAI2P)
* @{
*/
#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
#define LL_RCC_PLLSAI2P_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 2 */
#define LL_RCC_PLLSAI2P_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 3 */
#define LL_RCC_PLLSAI2P_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 4 */
#define LL_RCC_PLLSAI2P_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 5 */
#define LL_RCC_PLLSAI2P_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 6 */
#define LL_RCC_PLLSAI2P_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */
#define LL_RCC_PLLSAI2P_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 8 */
#define LL_RCC_PLLSAI2P_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 9 */
#define LL_RCC_PLLSAI2P_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 10 */
#define LL_RCC_PLLSAI2P_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 1 */
#define LL_RCC_PLLSAI2P_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 12 */
#define LL_RCC_PLLSAI2P_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 13 */
#define LL_RCC_PLLSAI2P_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 14 */
#define LL_RCC_PLLSAI2P_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 15 */
#define LL_RCC_PLLSAI2P_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4) /*!< PLLSAI2 division factor for PLLSAI2P output by 16 */
#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */
#define LL_RCC_PLLSAI2P_DIV_18 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 18 */
#define LL_RCC_PLLSAI2P_DIV_19 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 19 */
#define LL_RCC_PLLSAI2P_DIV_20 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 20 */
#define LL_RCC_PLLSAI2P_DIV_21 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division fctor for PLLSAI2P output by 21 */
#define LL_RCC_PLLSAI2P_DIV_22 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 22 */
#define LL_RCC_PLLSAI2P_DIV_23 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 23 */
#define LL_RCC_PLLSAI2P_DIV_24 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 24 */
#define LL_RCC_PLLSAI2P_DIV_25 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 25 */
#define LL_RCC_PLLSAI2P_DIV_26 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 26 */
#define LL_RCC_PLLSAI2P_DIV_27 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 27 */
#define LL_RCC_PLLSAI2P_DIV_28 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 28 */
#define LL_RCC_PLLSAI2P_DIV_29 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 29 */
#define LL_RCC_PLLSAI2P_DIV_30 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 30 */
#define LL_RCC_PLLSAI2P_DIV_31 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */
#else
#define LL_RCC_PLLSAI2P_DIV_7 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */
#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2P) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */
#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
/**
* @}
*/
/** @defgroup RCC_LL_EC_PLLSAI2R PLLSAI2 division factor (PLLSAI2R)
* @{
*/
#define LL_RCC_PLLSAI2R_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2R output by 2 */
#define LL_RCC_PLLSAI2R_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2R_0) /*!< PLLSAI2 division factor for PLLSAI2R output by 4 */
#define LL_RCC_PLLSAI2R_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2R_1) /*!< PLLSAI2 division factor for PLLSAI2R output by 6 */
#define LL_RCC_PLLSAI2R_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2R) /*!< PLLSAI2 division factor for PLLSAI2R output by 8 */
/**
* @}
*/
#if defined(RCC_CCIPR2_PLLSAI2DIVR)
/** @defgroup RCC_LL_EC_PLLSAI2DIVR PLLSAI2DIVR division factor (PLLSAI2DIVR)
* @{
*/
#define LL_RCC_PLLSAI2DIVR_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 2 */
#define LL_RCC_PLLSAI2DIVR_DIV_4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 4 */
#define LL_RCC_PLLSAI2DIVR_DIV_8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 8 */
#define LL_RCC_PLLSAI2DIVR_DIV_16 (RCC_CCIPR2_PLLSAI2DIVR_1 | RCC_CCIPR2_PLLSAI2DIVR_0) /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 16 */
/**
* @}
*/
#endif /* RCC_CCIPR2_PLLSAI2DIVR */
#endif /* RCC_PLLSAI2_SUPPORT */
/** @defgroup RCC_LL_EC_MSIRANGESEL MSI clock range selection
* @{
*/
#define LL_RCC_MSIRANGESEL_STANDBY 0U /*!< MSI Range is provided by MSISRANGE */
#define LL_RCC_MSIRANGESEL_RUN 1U /*!< MSI Range is provided by MSIRANGE */
/**
* @}
*/
/** Legacy definitions for compatibility purpose
@cond 0
*/
#if defined(DFSDM1_Channel0)
#define LL_RCC_DFSDM1_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2
#define LL_RCC_DFSDM_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2
#define LL_RCC_DFSDM_CLKSOURCE_SYSCLK LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
#define LL_RCC_DFSDM_CLKSOURCE LL_RCC_DFSDM1_CLKSOURCE
#endif /* DFSDM1_Channel0 */
#if defined(SWPMI1)
#define LL_RCC_SWPMI1_CLKSOURCE_PCLK LL_RCC_SWPMI1_CLKSOURCE_PCLK1
#endif /* SWPMI1 */
/**
@endcond
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
* @{
*/
/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in RCC register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
/**
* @brief Read a value in RCC register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
/**
* @}
*/
/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
* @{
*/
/**
* @brief Helper macro to calculate the PLLCLK frequency on system domain
* @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param __PLLN__ Between 8 and 86
* @param __PLLR__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLR_DIV_2
* @arg @ref LL_RCC_PLLR_DIV_4
* @arg @ref LL_RCC_PLLR_DIV_6
* @arg @ref LL_RCC_PLLR_DIV_8
* @retval PLL clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
((((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U) * 2U))
#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
/**
* @brief Helper macro to calculate the PLLCLK frequency used on SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param __PLLN__ Between 8 and 86
* @param __PLLP__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_2
* @arg @ref LL_RCC_PLLP_DIV_3
* @arg @ref LL_RCC_PLLP_DIV_4
* @arg @ref LL_RCC_PLLP_DIV_5
* @arg @ref LL_RCC_PLLP_DIV_6
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_8
* @arg @ref LL_RCC_PLLP_DIV_9
* @arg @ref LL_RCC_PLLP_DIV_10
* @arg @ref LL_RCC_PLLP_DIV_11
* @arg @ref LL_RCC_PLLP_DIV_12
* @arg @ref LL_RCC_PLLP_DIV_13
* @arg @ref LL_RCC_PLLP_DIV_14
* @arg @ref LL_RCC_PLLP_DIV_15
* @arg @ref LL_RCC_PLLP_DIV_16
* @arg @ref LL_RCC_PLLP_DIV_17
* @arg @ref LL_RCC_PLLP_DIV_18
* @arg @ref LL_RCC_PLLP_DIV_19
* @arg @ref LL_RCC_PLLP_DIV_20
* @arg @ref LL_RCC_PLLP_DIV_21
* @arg @ref LL_RCC_PLLP_DIV_22
* @arg @ref LL_RCC_PLLP_DIV_23
* @arg @ref LL_RCC_PLLP_DIV_24
* @arg @ref LL_RCC_PLLP_DIV_25
* @arg @ref LL_RCC_PLLP_DIV_26
* @arg @ref LL_RCC_PLLP_DIV_27
* @arg @ref LL_RCC_PLLP_DIV_28
* @arg @ref LL_RCC_PLLP_DIV_29
* @arg @ref LL_RCC_PLLP_DIV_30
* @arg @ref LL_RCC_PLLP_DIV_31
* @retval PLL clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
((__PLLP__) >> RCC_PLLCFGR_PLLPDIV_Pos))
#else
/**
* @brief Helper macro to calculate the PLLCLK frequency used on SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLN__ Between 8 and 86
* @param __PLLP__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_17
* @retval PLL clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
(((__PLLP__) == LL_RCC_PLLP_DIV_7) ? 7U : 17U))
#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
/**
* @brief Helper macro to calculate the PLLCLK frequency used on 48M domain
* @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param __PLLN__ Between 8 and 86
* @param __PLLQ__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLQ_DIV_2
* @arg @ref LL_RCC_PLLQ_DIV_4
* @arg @ref LL_RCC_PLLQ_DIV_6
* @arg @ref LL_RCC_PLLQ_DIV_8
* @retval PLL clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
((((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U))
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLSAI1M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_2
* @arg @ref LL_RCC_PLLSAI1P_DIV_3
* @arg @ref LL_RCC_PLLSAI1P_DIV_4
* @arg @ref LL_RCC_PLLSAI1P_DIV_5
* @arg @ref LL_RCC_PLLSAI1P_DIV_6
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_8
* @arg @ref LL_RCC_PLLSAI1P_DIV_9
* @arg @ref LL_RCC_PLLSAI1P_DIV_10
* @arg @ref LL_RCC_PLLSAI1P_DIV_11
* @arg @ref LL_RCC_PLLSAI1P_DIV_12
* @arg @ref LL_RCC_PLLSAI1P_DIV_13
* @arg @ref LL_RCC_PLLSAI1P_DIV_14
* @arg @ref LL_RCC_PLLSAI1P_DIV_15
* @arg @ref LL_RCC_PLLSAI1P_DIV_16
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @arg @ref LL_RCC_PLLSAI1P_DIV_18
* @arg @ref LL_RCC_PLLSAI1P_DIV_19
* @arg @ref LL_RCC_PLLSAI1P_DIV_20
* @arg @ref LL_RCC_PLLSAI1P_DIV_21
* @arg @ref LL_RCC_PLLSAI1P_DIV_22
* @arg @ref LL_RCC_PLLSAI1P_DIV_23
* @arg @ref LL_RCC_PLLSAI1P_DIV_24
* @arg @ref LL_RCC_PLLSAI1P_DIV_25
* @arg @ref LL_RCC_PLLSAI1P_DIV_26
* @arg @ref LL_RCC_PLLSAI1P_DIV_27
* @arg @ref LL_RCC_PLLSAI1P_DIV_28
* @arg @ref LL_RCC_PLLSAI1P_DIV_29
* @arg @ref LL_RCC_PLLSAI1P_DIV_30
* @arg @ref LL_RCC_PLLSAI1P_DIV_31
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__) \
((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))
#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_2
* @arg @ref LL_RCC_PLLSAI1P_DIV_3
* @arg @ref LL_RCC_PLLSAI1P_DIV_4
* @arg @ref LL_RCC_PLLSAI1P_DIV_5
* @arg @ref LL_RCC_PLLSAI1P_DIV_6
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_8
* @arg @ref LL_RCC_PLLSAI1P_DIV_9
* @arg @ref LL_RCC_PLLSAI1P_DIV_10
* @arg @ref LL_RCC_PLLSAI1P_DIV_11
* @arg @ref LL_RCC_PLLSAI1P_DIV_12
* @arg @ref LL_RCC_PLLSAI1P_DIV_13
* @arg @ref LL_RCC_PLLSAI1P_DIV_14
* @arg @ref LL_RCC_PLLSAI1P_DIV_15
* @arg @ref LL_RCC_PLLSAI1P_DIV_16
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @arg @ref LL_RCC_PLLSAI1P_DIV_18
* @arg @ref LL_RCC_PLLSAI1P_DIV_19
* @arg @ref LL_RCC_PLLSAI1P_DIV_20
* @arg @ref LL_RCC_PLLSAI1P_DIV_21
* @arg @ref LL_RCC_PLLSAI1P_DIV_22
* @arg @ref LL_RCC_PLLSAI1P_DIV_23
* @arg @ref LL_RCC_PLLSAI1P_DIV_24
* @arg @ref LL_RCC_PLLSAI1P_DIV_25
* @arg @ref LL_RCC_PLLSAI1P_DIV_26
* @arg @ref LL_RCC_PLLSAI1P_DIV_27
* @arg @ref LL_RCC_PLLSAI1P_DIV_28
* @arg @ref LL_RCC_PLLSAI1P_DIV_29
* @arg @ref LL_RCC_PLLSAI1P_DIV_30
* @arg @ref LL_RCC_PLLSAI1P_DIV_31
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))
#else
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
(((__PLLSAI1P__) == LL_RCC_PLLSAI1P_DIV_7) ? 7U : 17U))
#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLSAI1M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1Q__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1Q_DIV_2
* @arg @ref LL_RCC_PLLSAI1Q_DIV_4
* @arg @ref LL_RCC_PLLSAI1Q_DIV_6
* @arg @ref LL_RCC_PLLSAI1Q_DIV_8
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1Q__) \
((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U))
#else
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1Q__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1Q_DIV_2
* @arg @ref LL_RCC_PLLSAI1Q_DIV_4
* @arg @ref LL_RCC_PLLSAI1Q_DIV_6
* @arg @ref LL_RCC_PLLSAI1Q_DIV_8
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1Q__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U))
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLSAI1M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1R__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1R_DIV_2
* @arg @ref LL_RCC_PLLSAI1R_DIV_4
* @arg @ref LL_RCC_PLLSAI1R_DIV_6
* @arg @ref LL_RCC_PLLSAI1R_DIV_8
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1R__) \
((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U))
#else
/**
* @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI1N__ Between 8 and 86
* @param __PLLSAI1R__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1R_DIV_2
* @arg @ref LL_RCC_PLLSAI1R_DIV_4
* @arg @ref LL_RCC_PLLSAI1R_DIV_6
* @arg @ref LL_RCC_PLLSAI1R_DIV_8
* @retval PLLSAI1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1R__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U))
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLSAI2M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_2
* @arg @ref LL_RCC_PLLSAI2P_DIV_3
* @arg @ref LL_RCC_PLLSAI2P_DIV_4
* @arg @ref LL_RCC_PLLSAI2P_DIV_5
* @arg @ref LL_RCC_PLLSAI2P_DIV_6
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_8
* @arg @ref LL_RCC_PLLSAI2P_DIV_9
* @arg @ref LL_RCC_PLLSAI2P_DIV_10
* @arg @ref LL_RCC_PLLSAI2P_DIV_11
* @arg @ref LL_RCC_PLLSAI2P_DIV_12
* @arg @ref LL_RCC_PLLSAI2P_DIV_13
* @arg @ref LL_RCC_PLLSAI2P_DIV_14
* @arg @ref LL_RCC_PLLSAI2P_DIV_15
* @arg @ref LL_RCC_PLLSAI2P_DIV_16
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @arg @ref LL_RCC_PLLSAI2P_DIV_18
* @arg @ref LL_RCC_PLLSAI2P_DIV_19
* @arg @ref LL_RCC_PLLSAI2P_DIV_20
* @arg @ref LL_RCC_PLLSAI2P_DIV_21
* @arg @ref LL_RCC_PLLSAI2P_DIV_22
* @arg @ref LL_RCC_PLLSAI2P_DIV_23
* @arg @ref LL_RCC_PLLSAI2P_DIV_24
* @arg @ref LL_RCC_PLLSAI2P_DIV_25
* @arg @ref LL_RCC_PLLSAI2P_DIV_26
* @arg @ref LL_RCC_PLLSAI2P_DIV_27
* @arg @ref LL_RCC_PLLSAI2P_DIV_28
* @arg @ref LL_RCC_PLLSAI2P_DIV_29
* @arg @ref LL_RCC_PLLSAI2P_DIV_30
* @arg @ref LL_RCC_PLLSAI2P_DIV_31
* @retval PLLSAI2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__) \
((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))
#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
/**
* @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_2
* @arg @ref LL_RCC_PLLSAI2P_DIV_3
* @arg @ref LL_RCC_PLLSAI2P_DIV_4
* @arg @ref LL_RCC_PLLSAI2P_DIV_5
* @arg @ref LL_RCC_PLLSAI2P_DIV_6
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_8
* @arg @ref LL_RCC_PLLSAI2P_DIV_9
* @arg @ref LL_RCC_PLLSAI2P_DIV_10
* @arg @ref LL_RCC_PLLSAI2P_DIV_11
* @arg @ref LL_RCC_PLLSAI2P_DIV_12
* @arg @ref LL_RCC_PLLSAI2P_DIV_13
* @arg @ref LL_RCC_PLLSAI2P_DIV_14
* @arg @ref LL_RCC_PLLSAI2P_DIV_15
* @arg @ref LL_RCC_PLLSAI2P_DIV_16
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @arg @ref LL_RCC_PLLSAI2P_DIV_18
* @arg @ref LL_RCC_PLLSAI2P_DIV_19
* @arg @ref LL_RCC_PLLSAI2P_DIV_20
* @arg @ref LL_RCC_PLLSAI2P_DIV_21
* @arg @ref LL_RCC_PLLSAI2P_DIV_22
* @arg @ref LL_RCC_PLLSAI2P_DIV_23
* @arg @ref LL_RCC_PLLSAI2P_DIV_24
* @arg @ref LL_RCC_PLLSAI2P_DIV_25
* @arg @ref LL_RCC_PLLSAI2P_DIV_26
* @arg @ref LL_RCC_PLLSAI2P_DIV_27
* @arg @ref LL_RCC_PLLSAI2P_DIV_28
* @arg @ref LL_RCC_PLLSAI2P_DIV_29
* @arg @ref LL_RCC_PLLSAI2P_DIV_30
* @arg @ref LL_RCC_PLLSAI2P_DIV_31
* @retval PLLSAI2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \
((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))
#else
/**
* @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2P__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @retval PLLSAI2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1)) * (__PLLSAI2N__) / \
(((__PLLSAI2P__) == LL_RCC_PLLSAI2P_DIV_7) ? 7U : 17U))
#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
#if defined(LTDC)
/**
* @brief Helper macro to calculate the PLLSAI2 frequency used for LTDC domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR (), @ref LL_RCC_PLLSAI2_GetDIVR ());
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI)
* @param __PLLSAI2M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2R__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2R_DIV_2
* @arg @ref LL_RCC_PLLSAI2R_DIV_4
* @arg @ref LL_RCC_PLLSAI2R_DIV_6
* @arg @ref LL_RCC_PLLSAI2R_DIV_8
* @param __PLLSAI2DIVR__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
* @retval PLLSAI2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_LTDC_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2R__, __PLLSAI2DIVR__) \
(((__INPUTFREQ__) / (((__PLLSAI2M__)>> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
(((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U) * (aRCC_PLLSAI2DIVRPrescTable[(__PLLSAI2DIVR__) >> RCC_CCIPR2_PLLSAI2DIVR_Pos])))
#else
/**
* @brief Helper macro to calculate the PLLSAI2 frequency used on ADC domain
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR ());
* @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
* @param __PLLM__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2R__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2R_DIV_2
* @arg @ref LL_RCC_PLLSAI2R_DIV_4
* @arg @ref LL_RCC_PLLSAI2R_DIV_6
* @arg @ref LL_RCC_PLLSAI2R_DIV_8
* @retval PLLSAI2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2R__) \
((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \
((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U))
#endif /* LTDC */
#if defined(DSI)
/**
* @brief Helper macro to calculate the PLLDSICLK frequency used on DSI
* @note ex: @ref __LL_RCC_CALC_PLLSAI2_DSI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
* @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetQ ());
* @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI)
* @param __PLLSAI2M__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param __PLLSAI2N__ Between 8 and 86
* @param __PLLSAI2Q__ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2Q_DIV_2
* @arg @ref LL_RCC_PLLSAI2Q_DIV_4
* @arg @ref LL_RCC_PLLSAI2Q_DIV_6
* @arg @ref LL_RCC_PLLSAI2Q_DIV_8
* @retval PLL clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PLLSAI2_DSI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2Q__) \
((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
((((__PLLSAI2Q__) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) << 1U))
#endif /* DSI */
/**
* @brief Helper macro to calculate the HCLK frequency
* @param __SYSCLKFREQ__ SYSCLK frequency (based on MSI/HSE/HSI/PLLCLK)
* @param __AHBPRESCALER__ This parameter can be one of the following values:
* @arg @ref LL_RCC_SYSCLK_DIV_1
* @arg @ref LL_RCC_SYSCLK_DIV_2
* @arg @ref LL_RCC_SYSCLK_DIV_4
* @arg @ref LL_RCC_SYSCLK_DIV_8
* @arg @ref LL_RCC_SYSCLK_DIV_16
* @arg @ref LL_RCC_SYSCLK_DIV_64
* @arg @ref LL_RCC_SYSCLK_DIV_128
* @arg @ref LL_RCC_SYSCLK_DIV_256
* @arg @ref LL_RCC_SYSCLK_DIV_512
* @retval HCLK clock frequency (in Hz)
*/
#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
/**
* @brief Helper macro to calculate the PCLK1 frequency (ABP1)
* @param __HCLKFREQ__ HCLK frequency
* @param __APB1PRESCALER__ This parameter can be one of the following values:
* @arg @ref LL_RCC_APB1_DIV_1
* @arg @ref LL_RCC_APB1_DIV_2
* @arg @ref LL_RCC_APB1_DIV_4
* @arg @ref LL_RCC_APB1_DIV_8
* @arg @ref LL_RCC_APB1_DIV_16
* @retval PCLK1 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos])
/**
* @brief Helper macro to calculate the PCLK2 frequency (ABP2)
* @param __HCLKFREQ__ HCLK frequency
* @param __APB2PRESCALER__ This parameter can be one of the following values:
* @arg @ref LL_RCC_APB2_DIV_1
* @arg @ref LL_RCC_APB2_DIV_2
* @arg @ref LL_RCC_APB2_DIV_4
* @arg @ref LL_RCC_APB2_DIV_8
* @arg @ref LL_RCC_APB2_DIV_16
* @retval PCLK2 clock frequency (in Hz)
*/
#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos])
/**
* @brief Helper macro to calculate the MSI frequency (in Hz)
* @note __MSISEL__ can be retrieved thanks to function LL_RCC_MSI_IsEnabledRangeSelect()
* @note if __MSISEL__ is equal to LL_RCC_MSIRANGESEL_STANDBY,
* __MSIRANGE__can be retrieved by LL_RCC_MSI_GetRangeAfterStandby()
* else by LL_RCC_MSI_GetRange()
* ex: __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
* (LL_RCC_MSI_IsEnabledRangeSelect()?
* LL_RCC_MSI_GetRange():
* LL_RCC_MSI_GetRangeAfterStandby()))
* @param __MSISEL__ This parameter can be one of the following values:
* @arg @ref LL_RCC_MSIRANGESEL_STANDBY
* @arg @ref LL_RCC_MSIRANGESEL_RUN
* @param __MSIRANGE__ This parameter can be one of the following values:
* @arg @ref LL_RCC_MSIRANGE_0
* @arg @ref LL_RCC_MSIRANGE_1
* @arg @ref LL_RCC_MSIRANGE_2
* @arg @ref LL_RCC_MSIRANGE_3
* @arg @ref LL_RCC_MSIRANGE_4
* @arg @ref LL_RCC_MSIRANGE_5
* @arg @ref LL_RCC_MSIRANGE_6
* @arg @ref LL_RCC_MSIRANGE_7
* @arg @ref LL_RCC_MSIRANGE_8
* @arg @ref LL_RCC_MSIRANGE_9
* @arg @ref LL_RCC_MSIRANGE_10
* @arg @ref LL_RCC_MSIRANGE_11
* @arg @ref LL_RCC_MSISRANGE_4
* @arg @ref LL_RCC_MSISRANGE_5
* @arg @ref LL_RCC_MSISRANGE_6
* @arg @ref LL_RCC_MSISRANGE_7
* @retval MSI clock frequency (in Hz)
*/
#define __LL_RCC_CALC_MSI_FREQ(__MSISEL__, __MSIRANGE__) (((__MSISEL__) == LL_RCC_MSIRANGESEL_STANDBY) ? \
(MSIRangeTable[(__MSIRANGE__) >> 8U]) : \
(MSIRangeTable[(__MSIRANGE__) >> 4U]))
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
* @{
*/
/** @defgroup RCC_LL_EF_HSE HSE
* @{
*/
/**
* @brief Enable the Clock Security System.
* @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
{
SET_BIT(RCC->CR, RCC_CR_CSSON);
}
/**
* @brief Enable HSE external oscillator (HSE Bypass)
* @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
{
SET_BIT(RCC->CR, RCC_CR_HSEBYP);
}
/**
* @brief Disable HSE external oscillator (HSE Bypass)
* @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
}
/**
* @brief Enable HSE crystal oscillator (HSE ON)
* @rmtoll CR HSEON LL_RCC_HSE_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSE_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_HSEON);
}
/**
* @brief Disable HSE crystal oscillator (HSE ON)
* @rmtoll CR HSEON LL_RCC_HSE_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSE_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
}
/**
* @brief Check if HSE oscillator Ready
* @rmtoll CR HSERDY LL_RCC_HSE_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_HSI HSI
* @{
*/
/**
* @brief Enable HSI even in stop mode
* @note HSI oscillator is forced ON even in Stop mode
* @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void)
{
SET_BIT(RCC->CR, RCC_CR_HSIKERON);
}
/**
* @brief Disable HSI in stop mode
* @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON);
}
/**
* @brief Check if HSI is enabled in stop mode
* @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void)
{
return (READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON));
}
/**
* @brief Enable HSI oscillator
* @rmtoll CR HSION LL_RCC_HSI_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_HSION);
}
/**
* @brief Disable HSI oscillator
* @rmtoll CR HSION LL_RCC_HSI_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_HSION);
}
/**
* @brief Check if HSI clock is ready
* @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
}
/**
* @brief Enable HSI Automatic from stop mode
* @rmtoll CR HSIASFS LL_RCC_HSI_EnableAutoFromStop
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_EnableAutoFromStop(void)
{
SET_BIT(RCC->CR, RCC_CR_HSIASFS);
}
/**
* @brief Disable HSI Automatic from stop mode
* @rmtoll CR HSIASFS LL_RCC_HSI_DisableAutoFromStop
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_DisableAutoFromStop(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS);
}
/**
* @brief Get HSI Calibration value
* @note When HSITRIM is written, HSICAL is updated with the sum of
* HSITRIM and the factory trim value
* @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration
* @retval Between Min_Data = 0x00 and Max_Data = 0xFF
*/
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
{
return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos);
}
/**
* @brief Set HSI Calibration trimming
* @note user-programmable trimming value that is added to the HSICAL
* @note Default value is 16, which, when added to the HSICAL value,
* should trim the HSI to 16 MHz +/- 1 %
* @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming
* @param Value Between Min_Data = 0 and Max_Data = 31
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
{
MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos);
}
/**
* @brief Get HSI Calibration trimming
* @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming
* @retval Between Min_Data = 0 and Max_Data = 31
*/
__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
{
return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos);
}
/**
* @}
*/
#if defined(RCC_HSI48_SUPPORT)
/** @defgroup RCC_LL_EF_HSI48 HSI48
* @{
*/
/**
* @brief Enable HSI48
* @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI48_Enable(void)
{
SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON);
}
/**
* @brief Disable HSI48
* @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_HSI48_Disable(void)
{
CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON);
}
/**
* @brief Check if HSI48 oscillator Ready
* @rmtoll CRRCR HSI48RDY LL_RCC_HSI48_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void)
{
return (READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == (RCC_CRRCR_HSI48RDY));
}
/**
* @brief Get HSI48 Calibration value
* @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration
* @retval Between Min_Data = 0x00 and Max_Data = 0x1FF
*/
__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void)
{
return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos);
}
/**
* @}
*/
#endif /* RCC_HSI48_SUPPORT */
/** @defgroup RCC_LL_EF_LSE LSE
* @{
*/
/**
* @brief Enable Low Speed External (LSE) crystal.
* @rmtoll BDCR LSEON LL_RCC_LSE_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_Enable(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
}
/**
* @brief Disable Low Speed External (LSE) crystal.
* @rmtoll BDCR LSEON LL_RCC_LSE_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_Disable(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
}
/**
* @brief Enable external clock source (LSE bypass).
* @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
}
/**
* @brief Disable external clock source (LSE bypass).
* @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
}
/**
* @brief Set LSE oscillator drive capability
* @note The oscillator is in Xtal mode when it is not in bypass mode.
* @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
* @param LSEDrive This parameter can be one of the following values:
* @arg @ref LL_RCC_LSEDRIVE_LOW
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
* @arg @ref LL_RCC_LSEDRIVE_HIGH
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
{
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
}
/**
* @brief Get LSE oscillator drive capability
* @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_LSEDRIVE_LOW
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
* @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
* @arg @ref LL_RCC_LSEDRIVE_HIGH
*/
__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
{
return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
}
/**
* @brief Enable Clock security system on LSE.
* @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
}
/**
* @brief Disable Clock security system on LSE.
* @note Clock security system can be disabled only after a LSE
* failure detection. In that case it MUST be disabled by software.
* @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
}
/**
* @brief Check if LSE oscillator Ready
* @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
{
return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
}
/**
* @brief Check if CSS on LSE failure Detection
* @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void)
{
return (READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD));
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_LSI LSI
* @{
*/
/**
* @brief Enable LSI Oscillator
* @rmtoll CSR LSION LL_RCC_LSI_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSI_Enable(void)
{
SET_BIT(RCC->CSR, RCC_CSR_LSION);
}
/**
* @brief Disable LSI Oscillator
* @rmtoll CSR LSION LL_RCC_LSI_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSI_Disable(void)
{
CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
}
/**
* @brief Check if LSI is Ready
* @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_MSI MSI
* @{
*/
/**
* @brief Enable MSI oscillator
* @rmtoll CR MSION LL_RCC_MSI_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_MSION);
}
/**
* @brief Disable MSI oscillator
* @rmtoll CR MSION LL_RCC_MSI_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_MSION);
}
/**
* @brief Check if MSI oscillator Ready
* @rmtoll CR MSIRDY LL_RCC_MSI_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_MSIRDY) == (RCC_CR_MSIRDY));
}
/**
* @brief Enable MSI PLL-mode (Hardware auto calibration with LSE)
* @note MSIPLLEN must be enabled after LSE is enabled (LSEON enabled)
* and ready (LSERDY set by hardware)
* @note hardware protection to avoid enabling MSIPLLEN if LSE is not
* ready
* @rmtoll CR MSIPLLEN LL_RCC_MSI_EnablePLLMode
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_EnablePLLMode(void)
{
SET_BIT(RCC->CR, RCC_CR_MSIPLLEN);
}
/**
* @brief Disable MSI-PLL mode
* @note cleared by hardware when LSE is disabled (LSEON = 0) or when
* the Clock Security System on LSE detects a LSE failure
* @rmtoll CR MSIPLLEN LL_RCC_MSI_DisablePLLMode
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_DisablePLLMode(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN);
}
/**
* @brief Enable MSI clock range selection with MSIRANGE register
* @note Write 0 has no effect. After a standby or a reset
* MSIRGSEL is at 0 and the MSI range value is provided by
* MSISRANGE
* @rmtoll CR MSIRGSEL LL_RCC_MSI_EnableRangeSelection
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_EnableRangeSelection(void)
{
SET_BIT(RCC->CR, RCC_CR_MSIRGSEL);
}
/**
* @brief Check if MSI clock range is selected with MSIRANGE register
* @rmtoll CR MSIRGSEL LL_RCC_MSI_IsEnabledRangeSelect
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_IsEnabledRangeSelect(void)
{
return (READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == (RCC_CR_MSIRGSEL));
}
/**
* @brief Configure the Internal Multi Speed oscillator (MSI) clock range in run mode.
* @rmtoll CR MSIRANGE LL_RCC_MSI_SetRange
* @param Range This parameter can be one of the following values:
* @arg @ref LL_RCC_MSIRANGE_0
* @arg @ref LL_RCC_MSIRANGE_1
* @arg @ref LL_RCC_MSIRANGE_2
* @arg @ref LL_RCC_MSIRANGE_3
* @arg @ref LL_RCC_MSIRANGE_4
* @arg @ref LL_RCC_MSIRANGE_5
* @arg @ref LL_RCC_MSIRANGE_6
* @arg @ref LL_RCC_MSIRANGE_7
* @arg @ref LL_RCC_MSIRANGE_8
* @arg @ref LL_RCC_MSIRANGE_9
* @arg @ref LL_RCC_MSIRANGE_10
* @arg @ref LL_RCC_MSIRANGE_11
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_SetRange(uint32_t Range)
{
MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, Range);
}
/**
* @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode.
* @rmtoll CR MSIRANGE LL_RCC_MSI_GetRange
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_MSIRANGE_0
* @arg @ref LL_RCC_MSIRANGE_1
* @arg @ref LL_RCC_MSIRANGE_2
* @arg @ref LL_RCC_MSIRANGE_3
* @arg @ref LL_RCC_MSIRANGE_4
* @arg @ref LL_RCC_MSIRANGE_5
* @arg @ref LL_RCC_MSIRANGE_6
* @arg @ref LL_RCC_MSIRANGE_7
* @arg @ref LL_RCC_MSIRANGE_8
* @arg @ref LL_RCC_MSIRANGE_9
* @arg @ref LL_RCC_MSIRANGE_10
* @arg @ref LL_RCC_MSIRANGE_11
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_GetRange(void)
{
return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_MSIRANGE));
}
/**
* @brief Configure MSI range used after standby
* @rmtoll CSR MSISRANGE LL_RCC_MSI_SetRangeAfterStandby
* @param Range This parameter can be one of the following values:
* @arg @ref LL_RCC_MSISRANGE_4
* @arg @ref LL_RCC_MSISRANGE_5
* @arg @ref LL_RCC_MSISRANGE_6
* @arg @ref LL_RCC_MSISRANGE_7
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_SetRangeAfterStandby(uint32_t Range)
{
MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, Range);
}
/**
* @brief Get MSI range used after standby
* @rmtoll CSR MSISRANGE LL_RCC_MSI_GetRangeAfterStandby
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_MSISRANGE_4
* @arg @ref LL_RCC_MSISRANGE_5
* @arg @ref LL_RCC_MSISRANGE_6
* @arg @ref LL_RCC_MSISRANGE_7
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_GetRangeAfterStandby(void)
{
return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE));
}
/**
* @brief Get MSI Calibration value
* @note When MSITRIM is written, MSICAL is updated with the sum of
* MSITRIM and the factory trim value
* @rmtoll ICSCR MSICAL LL_RCC_MSI_GetCalibration
* @retval Between Min_Data = 0 and Max_Data = 255
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibration(void)
{
return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSICAL) >> RCC_ICSCR_MSICAL_Pos);
}
/**
* @brief Set MSI Calibration trimming
* @note user-programmable trimming value that is added to the MSICAL
* @rmtoll ICSCR MSITRIM LL_RCC_MSI_SetCalibTrimming
* @param Value Between Min_Data = 0 and Max_Data = 255
* @retval None
*/
__STATIC_INLINE void LL_RCC_MSI_SetCalibTrimming(uint32_t Value)
{
MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, Value << RCC_ICSCR_MSITRIM_Pos);
}
/**
* @brief Get MSI Calibration trimming
* @rmtoll ICSCR MSITRIM LL_RCC_MSI_GetCalibTrimming
* @retval Between 0 and 255
*/
__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibTrimming(void)
{
return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos);
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_LSCO LSCO
* @{
*/
/**
* @brief Enable Low speed clock
* @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSCO_Enable(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
}
/**
* @brief Disable Low speed clock
* @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSCO_Disable(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
}
/**
* @brief Configure Low speed clock selection
* @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
* @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
* @retval None
*/
__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source)
{
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source);
}
/**
* @brief Get Low speed clock selection
* @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
* @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
*/
__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void)
{
return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL));
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_System System
* @{
*/
/**
* @brief Configure the system clock source
* @rmtoll CFGR SW LL_RCC_SetSysClkSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_SYS_CLKSOURCE_MSI
* @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
* @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
* @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
}
/**
* @brief Get the system clock source
* @rmtoll CFGR SWS LL_RCC_GetSysClkSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_MSI
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
* @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
*/
__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
{
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
}
/**
* @brief Set AHB prescaler
* @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
* @param Prescaler This parameter can be one of the following values:
* @arg @ref LL_RCC_SYSCLK_DIV_1
* @arg @ref LL_RCC_SYSCLK_DIV_2
* @arg @ref LL_RCC_SYSCLK_DIV_4
* @arg @ref LL_RCC_SYSCLK_DIV_8
* @arg @ref LL_RCC_SYSCLK_DIV_16
* @arg @ref LL_RCC_SYSCLK_DIV_64
* @arg @ref LL_RCC_SYSCLK_DIV_128
* @arg @ref LL_RCC_SYSCLK_DIV_256
* @arg @ref LL_RCC_SYSCLK_DIV_512
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
}
/**
* @brief Set APB1 prescaler
* @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler
* @param Prescaler This parameter can be one of the following values:
* @arg @ref LL_RCC_APB1_DIV_1
* @arg @ref LL_RCC_APB1_DIV_2
* @arg @ref LL_RCC_APB1_DIV_4
* @arg @ref LL_RCC_APB1_DIV_8
* @arg @ref LL_RCC_APB1_DIV_16
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler);
}
/**
* @brief Set APB2 prescaler
* @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler
* @param Prescaler This parameter can be one of the following values:
* @arg @ref LL_RCC_APB2_DIV_1
* @arg @ref LL_RCC_APB2_DIV_2
* @arg @ref LL_RCC_APB2_DIV_4
* @arg @ref LL_RCC_APB2_DIV_8
* @arg @ref LL_RCC_APB2_DIV_16
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler);
}
/**
* @brief Get AHB prescaler
* @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SYSCLK_DIV_1
* @arg @ref LL_RCC_SYSCLK_DIV_2
* @arg @ref LL_RCC_SYSCLK_DIV_4
* @arg @ref LL_RCC_SYSCLK_DIV_8
* @arg @ref LL_RCC_SYSCLK_DIV_16
* @arg @ref LL_RCC_SYSCLK_DIV_64
* @arg @ref LL_RCC_SYSCLK_DIV_128
* @arg @ref LL_RCC_SYSCLK_DIV_256
* @arg @ref LL_RCC_SYSCLK_DIV_512
*/
__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
{
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
}
/**
* @brief Get APB1 prescaler
* @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_APB1_DIV_1
* @arg @ref LL_RCC_APB1_DIV_2
* @arg @ref LL_RCC_APB1_DIV_4
* @arg @ref LL_RCC_APB1_DIV_8
* @arg @ref LL_RCC_APB1_DIV_16
*/
__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
{
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1));
}
/**
* @brief Get APB2 prescaler
* @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_APB2_DIV_1
* @arg @ref LL_RCC_APB2_DIV_2
* @arg @ref LL_RCC_APB2_DIV_4
* @arg @ref LL_RCC_APB2_DIV_8
* @arg @ref LL_RCC_APB2_DIV_16
*/
__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
{
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2));
}
/**
* @brief Set Clock After Wake-Up From Stop mode
* @rmtoll CFGR STOPWUCK LL_RCC_SetClkAfterWakeFromStop
* @param Clock This parameter can be one of the following values:
* @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI
* @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetClkAfterWakeFromStop(uint32_t Clock)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Clock);
}
/**
* @brief Get Clock After Wake-Up From Stop mode
* @rmtoll CFGR STOPWUCK LL_RCC_GetClkAfterWakeFromStop
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI
* @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
*/
__STATIC_INLINE uint32_t LL_RCC_GetClkAfterWakeFromStop(void)
{
return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK));
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_MCO MCO
* @{
*/
/**
* @brief Configure MCOx
* @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n
* CFGR MCOPRE LL_RCC_ConfigMCO
* @param MCOxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK
* @arg @ref LL_RCC_MCO1SOURCE_SYSCLK
* @arg @ref LL_RCC_MCO1SOURCE_MSI
* @arg @ref LL_RCC_MCO1SOURCE_HSI
* @arg @ref LL_RCC_MCO1SOURCE_HSE
* @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*)
* @arg @ref LL_RCC_MCO1SOURCE_PLLCLK
* @arg @ref LL_RCC_MCO1SOURCE_LSI
* @arg @ref LL_RCC_MCO1SOURCE_LSE
*
* (*) value not defined in all devices.
* @param MCOxPrescaler This parameter can be one of the following values:
* @arg @ref LL_RCC_MCO1_DIV_1
* @arg @ref LL_RCC_MCO1_DIV_2
* @arg @ref LL_RCC_MCO1_DIV_4
* @arg @ref LL_RCC_MCO1_DIV_8
* @arg @ref LL_RCC_MCO1_DIV_16
* @retval None
*/
__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
{
MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler);
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
* @{
*/
/**
* @brief Configure USARTx clock source
* @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource
* @param USARTxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
* @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
* @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
* @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
* @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
* @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
{
MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16), (USARTxSource & 0x0000FFFF));
}
#if defined(UART4) || defined(UART5)
/**
* @brief Configure UARTx clock source
* @rmtoll CCIPR UARTxSEL LL_RCC_SetUARTClockSource
* @param UARTxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
* @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
* @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
* @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
{
MODIFY_REG(RCC->CCIPR, (UARTxSource >> 16), (UARTxSource & 0x0000FFFF));
}
#endif /* UART4 || UART5 */
/**
* @brief Configure LPUART1x clock source
* @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource
* @param LPUARTxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, LPUARTxSource);
}
/**
* @brief Configure I2Cx clock source
* @rmtoll CCIPR I2CxSEL LL_RCC_SetI2CClockSource
* @param I2CxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
* @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
* @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
* @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2CxSource >> 24U));
MODIFY_REG(*reg, 3U << ((I2CxSource & 0x00FF0000U) >> 16U), ((I2CxSource & 0x000000FFU) << ((I2CxSource & 0x00FF0000U) >> 16U)));
}
/**
* @brief Configure LPTIMx clock source
* @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource
* @param LPTIMxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource)
{
MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U));
}
/**
* @brief Configure SAIx clock source
@if STM32L4S9xx
* @rmtoll CCIPR2 SAIxSEL LL_RCC_SetSAIClockSource
@else
* @rmtoll CCIPR SAIxSEL LL_RCC_SetSAIClockSource
@endif
* @param SAIxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource)
{
#if defined(RCC_CCIPR2_SAI1SEL)
MODIFY_REG(RCC->CCIPR2, (SAIxSource >> 16U), (SAIxSource & 0x0000FFFFU));
#else
MODIFY_REG(RCC->CCIPR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U));
#endif /* RCC_CCIPR2_SAI1SEL */
}
#if defined(RCC_CCIPR2_SDMMCSEL)
/**
* @brief Configure SDMMC1 kernel clock source
* @rmtoll CCIPR2 SDMMCSEL LL_RCC_SetSDMMCKernelClockSource
* @param SDMMCxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*)
* @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetSDMMCKernelClockSource(uint32_t SDMMCxSource)
{
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL, SDMMCxSource);
}
#endif /* RCC_CCIPR2_SDMMCSEL */
/**
* @brief Configure SDMMC1 clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_SetSDMMCClockSource
* @param SDMMCxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, SDMMCxSource);
}
/**
* @brief Configure RNG clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_SetRNGClockSource
* @param RNGxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
* @arg @ref LL_RCC_RNG_CLKSOURCE_MSI
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, RNGxSource);
}
#if defined(USB_OTG_FS) || defined(USB)
/**
* @brief Configure USB clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_SetUSBClockSource
* @param USBxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_USB_CLKSOURCE_PLL
* @arg @ref LL_RCC_USB_CLKSOURCE_MSI
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, USBxSource);
}
#endif /* USB_OTG_FS || USB */
/**
* @brief Configure ADC clock source
* @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource
* @param ADCxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_ADC_CLKSOURCE_NONE
* @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource);
}
#if defined(SWPMI1)
/**
* @brief Configure SWPMI clock source
* @rmtoll CCIPR SWPMI1SEL LL_RCC_SetSWPMIClockSource
* @param SWPMIxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetSWPMIClockSource(uint32_t SWPMIxSource)
{
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, SWPMIxSource);
}
#endif /* SWPMI1 */
#if defined(DFSDM1_Channel0)
#if defined(RCC_CCIPR2_ADFSDM1SEL)
/**
* @brief Configure DFSDM Audio clock source
* @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_SetDFSDMAudioClockSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source)
{
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, Source);
}
#endif /* RCC_CCIPR2_ADFSDM1SEL */
/**
* @brief Configure DFSDM Kernel clock source
@if STM32L4S9xx
* @rmtoll CCIPR2 DFSDM1SEL LL_RCC_SetDFSDMClockSource
@else
* @rmtoll CCIPR DFSDM1SEL LL_RCC_SetDFSDMClockSource
@endif
* @param DFSDMxSource This parameter can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t DFSDMxSource)
{
#if defined(RCC_CCIPR2_DFSDM1SEL)
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, DFSDMxSource);
#else
MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, DFSDMxSource);
#endif /* RCC_CCIPR2_DFSDM1SEL */
}
#endif /* DFSDM1_Channel0 */
#if defined(DSI)
/**
* @brief Configure DSI clock source
* @rmtoll CCIPR2 DSISEL LL_RCC_SetDSIClockSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
* @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source)
{
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, Source);
}
#endif /* DSI */
#if defined(LTDC)
/**
* @brief Configure LTDC Clock Source
* @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_SetLTDCClockSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetLTDCClockSource(uint32_t Source)
{
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, Source);
}
#endif /* LTDC */
#if defined(OCTOSPI1)
/**
* @brief Configure OCTOSPI clock source
* @rmtoll CCIPR2 OSPISEL LL_RCC_SetOCTOSPIClockSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetOCTOSPIClockSource(uint32_t Source)
{
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, Source);
}
#endif /* OCTOSPI1 */
/**
* @brief Get USARTx clock source
* @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource
* @param USARTx This parameter can be one of the following values:
* @arg @ref LL_RCC_USART1_CLKSOURCE
* @arg @ref LL_RCC_USART2_CLKSOURCE
* @arg @ref LL_RCC_USART3_CLKSOURCE (*)
*
* (*) value not defined in all devices.
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
* @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
* @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
* @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
* @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
* @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
* @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U));
}
#if defined(UART4) || defined(UART5)
/**
* @brief Get UARTx clock source
* @rmtoll CCIPR UARTxSEL LL_RCC_GetUARTClockSource
* @param UARTx This parameter can be one of the following values:
* @arg @ref LL_RCC_UART4_CLKSOURCE
* @arg @ref LL_RCC_UART5_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
* @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
* @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
* @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
*/
__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, UARTx) | (UARTx << 16U));
}
#endif /* UART4 || UART5 */
/**
* @brief Get LPUARTx clock source
* @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource
* @param LPUARTx This parameter can be one of the following values:
* @arg @ref LL_RCC_LPUART1_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
*/
__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx));
}
/**
* @brief Get I2Cx clock source
* @rmtoll CCIPR I2CxSEL LL_RCC_GetI2CClockSource
* @param I2Cx This parameter can be one of the following values:
* @arg @ref LL_RCC_I2C1_CLKSOURCE
* @arg @ref LL_RCC_I2C2_CLKSOURCE (*)
* @arg @ref LL_RCC_I2C3_CLKSOURCE
* @arg @ref LL_RCC_I2C4_CLKSOURCE (*)
*
* (*) value not defined in all devices.
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
* @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
* @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
* @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
* @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
* @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
{
__IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2Cx >> 24U));
return (uint32_t)((READ_BIT(*reg, 3U << ((I2Cx & 0x00FF0000U) >> 16U)) >> ((I2Cx & 0x00FF0000U) >> 16U)) | (I2Cx & 0xFFFF0000U));
}
/**
* @brief Get LPTIMx clock source
* @rmtoll CCIPR LPTIMxSEL LL_RCC_GetLPTIMClockSource
* @param LPTIMx This parameter can be one of the following values:
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
* @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
*/
__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, LPTIMx) >> 16U | LPTIMx);
}
/**
* @brief Get SAIx clock source
@if STM32L4S9xx
* @rmtoll CCIPR2 SAIxSEL LL_RCC_GetSAIClockSource
@else
* @rmtoll CCIPR SAIxSEL LL_RCC_GetSAIClockSource
@endif
* @param SAIx This parameter can be one of the following values:
* @arg @ref LL_RCC_SAI1_CLKSOURCE
* @arg @ref LL_RCC_SAI2_CLKSOURCE (*)
*
* (*) value not defined in all devices.
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL
* @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*)
* @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx)
{
#if defined(RCC_CCIPR2_SAI1SEL)
return (uint32_t)(READ_BIT(RCC->CCIPR2, SAIx) | (SAIx << 16U));
#else
return (uint32_t)(READ_BIT(RCC->CCIPR, SAIx) >> 16U | SAIx);
#endif /* RCC_CCIPR2_SAI1SEL */
}
#if defined(RCC_CCIPR2_SDMMCSEL)
/**
* @brief Get SDMMCx kernel clock source
* @rmtoll CCIPR2 SDMMCSEL LL_RCC_GetSDMMCKernelClockSource
* @param SDMMCx This parameter can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*)
* @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLL (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetSDMMCKernelClockSource(uint32_t SDMMCx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, SDMMCx));
}
#endif /* RCC_CCIPR2_SDMMCSEL */
/**
* @brief Get SDMMCx clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_GetSDMMCClockSource
* @param SDMMCx This parameter can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*)
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL
* @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, SDMMCx));
}
/**
* @brief Get RNGx clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_GetRNGClockSource
* @param RNGx This parameter can be one of the following values:
* @arg @ref LL_RCC_RNG_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
* @arg @ref LL_RCC_RNG_CLKSOURCE_MSI
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx));
}
#if defined(USB_OTG_FS) || defined(USB)
/**
* @brief Get USBx clock source
* @rmtoll CCIPR CLK48SEL LL_RCC_GetUSBClockSource
* @param USBx This parameter can be one of the following values:
* @arg @ref LL_RCC_USB_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
* @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
* @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_USB_CLKSOURCE_PLL
* @arg @ref LL_RCC_USB_CLKSOURCE_MSI
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, USBx));
}
#endif /* USB_OTG_FS || USB */
/**
* @brief Get ADCx clock source
* @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource
* @param ADCx This parameter can be one of the following values:
* @arg @ref LL_RCC_ADC_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_ADC_CLKSOURCE_NONE
* @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1
* @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*)
* @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx));
}
#if defined(SWPMI1)
/**
* @brief Get SWPMIx clock source
* @rmtoll CCIPR SWPMI1SEL LL_RCC_GetSWPMIClockSource
* @param SPWMIx This parameter can be one of the following values:
* @arg @ref LL_RCC_SWPMI1_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1
* @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI
*/
__STATIC_INLINE uint32_t LL_RCC_GetSWPMIClockSource(uint32_t SPWMIx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR, SPWMIx));
}
#endif /* SWPMI1 */
#if defined(DFSDM1_Channel0)
#if defined(RCC_CCIPR2_ADFSDM1SEL)
/**
* @brief Get DFSDM Audio Clock Source
* @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_GetDFSDMAudioClockSource
* @param DFSDMx This parameter can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI
* @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI
*/
__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx));
}
#endif /* RCC_CCIPR2_ADFSDM1SEL */
/**
* @brief Get DFSDMx Kernel clock source
@if STM32L4S9xx
* @rmtoll CCIPR2 DFSDM1SEL LL_RCC_GetDFSDMClockSource
@else
* @rmtoll CCIPR DFSDM1SEL LL_RCC_GetDFSDMClockSource
@endif
* @param DFSDMx This parameter can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
* @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
*/
__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx)
{
#if defined(RCC_CCIPR2_DFSDM1SEL)
return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx));
#else
return (uint32_t)(READ_BIT(RCC->CCIPR, DFSDMx));
#endif /* RCC_CCIPR2_DFSDM1SEL */
}
#endif /* DFSDM1_Channel0 */
#if defined(DSI)
/**
* @brief Get DSI Clock Source
* @rmtoll CCIPR2 DSISEL LL_RCC_GetDSIClockSource
* @param DSIx This parameter can be one of the following values:
* @arg @ref LL_RCC_DSI_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
* @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
*/
__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, DSIx));
}
#endif /* DSI */
#if defined(LTDC)
/**
* @brief Get LTDC Clock Source
* @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_GetLTDCClockSource
* @param LTDCx This parameter can be one of the following values:
* @arg @ref LL_RCC_LTDC_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8
* @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16
*/
__STATIC_INLINE uint32_t LL_RCC_GetLTDCClockSource(uint32_t LTDCx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, LTDCx));
}
#endif /* LTDC */
#if defined(OCTOSPI1)
/**
* @brief Get OCTOSPI clock source
* @rmtoll CCIPR2 OSPISEL LL_RCC_GetOCTOSPIClockSource
* @param OCTOSPIx This parameter can be one of the following values:
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI
* @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL
*/
__STATIC_INLINE uint32_t LL_RCC_GetOCTOSPIClockSource(uint32_t OCTOSPIx)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, OCTOSPIx));
}
#endif /* OCTOSPI1 */
/**
* @}
*/
/** @defgroup RCC_LL_EF_RTC RTC
* @{
*/
/**
* @brief Set RTC Clock Source
* @note Once the RTC clock source has been selected, it cannot be changed anymore unless
* the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is
* set). The BDRST bit can be used to reset them.
* @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
* @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
* @retval None
*/
__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
{
MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
}
/**
* @brief Get RTC Clock Source
* @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
* @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
* @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
*/
__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
{
return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
}
/**
* @brief Enable RTC
* @rmtoll BDCR RTCEN LL_RCC_EnableRTC
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableRTC(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
}
/**
* @brief Disable RTC
* @rmtoll BDCR RTCEN LL_RCC_DisableRTC
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableRTC(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
}
/**
* @brief Check if RTC has been enabled or not
* @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
{
return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
}
/**
* @brief Force the Backup domain reset
* @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
* @retval None
*/
__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
{
SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
}
/**
* @brief Release the Backup domain reset
* @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
* @retval None
*/
__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
{
CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_PLL PLL
* @{
*/
/**
* @brief Enable PLL
* @rmtoll CR PLLON LL_RCC_PLL_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_PLLON);
}
/**
* @brief Disable PLL
* @note Cannot be disabled if the PLL clock is used as the system clock
* @rmtoll CR PLLON LL_RCC_PLL_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
}
/**
* @brief Check if PLL Ready
* @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
}
/**
* @brief Configure PLL used for SYSCLK Domain
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLN/PLLR can be written only when PLL is disabled.
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n
* PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param PLLN Between 8 and 86
* @param PLLR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLR_DIV_2
* @arg @ref LL_RCC_PLLR_DIV_4
* @arg @ref LL_RCC_PLLR_DIV_6
* @arg @ref LL_RCC_PLLR_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR,
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR);
}
#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
/**
* @brief Configure PLL used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLN/PLLP can be written only when PLL is disabled.
* @note This can be selected for SAI1 or SAI2 (*)
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLPDIV LL_RCC_PLL_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_2
* @arg @ref LL_RCC_PLLP_DIV_3
* @arg @ref LL_RCC_PLLP_DIV_4
* @arg @ref LL_RCC_PLLP_DIV_5
* @arg @ref LL_RCC_PLLP_DIV_6
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_8
* @arg @ref LL_RCC_PLLP_DIV_9
* @arg @ref LL_RCC_PLLP_DIV_10
* @arg @ref LL_RCC_PLLP_DIV_11
* @arg @ref LL_RCC_PLLP_DIV_12
* @arg @ref LL_RCC_PLLP_DIV_13
* @arg @ref LL_RCC_PLLP_DIV_14
* @arg @ref LL_RCC_PLLP_DIV_15
* @arg @ref LL_RCC_PLLP_DIV_16
* @arg @ref LL_RCC_PLLP_DIV_17
* @arg @ref LL_RCC_PLLP_DIV_18
* @arg @ref LL_RCC_PLLP_DIV_19
* @arg @ref LL_RCC_PLLP_DIV_20
* @arg @ref LL_RCC_PLLP_DIV_21
* @arg @ref LL_RCC_PLLP_DIV_22
* @arg @ref LL_RCC_PLLP_DIV_23
* @arg @ref LL_RCC_PLLP_DIV_24
* @arg @ref LL_RCC_PLLP_DIV_25
* @arg @ref LL_RCC_PLLP_DIV_26
* @arg @ref LL_RCC_PLLP_DIV_27
* @arg @ref LL_RCC_PLLP_DIV_28
* @arg @ref LL_RCC_PLLP_DIV_29
* @arg @ref LL_RCC_PLLP_DIV_30
* @arg @ref LL_RCC_PLLP_DIV_31
* @retval None
*/
#else
/**
* @brief Configure PLL used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLN/PLLP can be written only when PLL is disabled.
* @note This can be selected for SAI1 or SAI2 (*)
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n
* PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_17
* @retval None
*/
#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLPDIV,
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
#else
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP,
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
}
/**
* @brief Configure PLL used for 48Mhz domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLN/PLLQ can be written only when PLL is disabled.
* @note This can be selected for USB, RNG, SDMMC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n
* PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n
* PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n
* PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
* @param PLLN Between 8 and 86
* @param PLLQ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLQ_DIV_2
* @arg @ref LL_RCC_PLLQ_DIV_4
* @arg @ref LL_RCC_PLLQ_DIV_6
* @arg @ref LL_RCC_PLLQ_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ,
Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ);
}
/**
* @brief Configure PLL clock source
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource
* @param PLLSource This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource);
}
/**
* @brief Get the oscillator used as PLL clock source.
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC));
}
/**
* @brief Get Main PLL multiplication factor for VCO
* @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN
* @retval Between 8 and 86
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
}
#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
/**
* @brief Get Main PLL division factor for PLLP
* @note Used for PLLSAI3CLK (SAI1 and SAI2 clock)
* @rmtoll PLLCFGR PLLPDIV LL_RCC_PLL_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_2
* @arg @ref LL_RCC_PLLP_DIV_3
* @arg @ref LL_RCC_PLLP_DIV_4
* @arg @ref LL_RCC_PLLP_DIV_5
* @arg @ref LL_RCC_PLLP_DIV_6
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_8
* @arg @ref LL_RCC_PLLP_DIV_9
* @arg @ref LL_RCC_PLLP_DIV_10
* @arg @ref LL_RCC_PLLP_DIV_11
* @arg @ref LL_RCC_PLLP_DIV_12
* @arg @ref LL_RCC_PLLP_DIV_13
* @arg @ref LL_RCC_PLLP_DIV_14
* @arg @ref LL_RCC_PLLP_DIV_15
* @arg @ref LL_RCC_PLLP_DIV_16
* @arg @ref LL_RCC_PLLP_DIV_17
* @arg @ref LL_RCC_PLLP_DIV_18
* @arg @ref LL_RCC_PLLP_DIV_19
* @arg @ref LL_RCC_PLLP_DIV_20
* @arg @ref LL_RCC_PLLP_DIV_21
* @arg @ref LL_RCC_PLLP_DIV_22
* @arg @ref LL_RCC_PLLP_DIV_23
* @arg @ref LL_RCC_PLLP_DIV_24
* @arg @ref LL_RCC_PLLP_DIV_25
* @arg @ref LL_RCC_PLLP_DIV_26
* @arg @ref LL_RCC_PLLP_DIV_27
* @arg @ref LL_RCC_PLLP_DIV_28
* @arg @ref LL_RCC_PLLP_DIV_29
* @arg @ref LL_RCC_PLLP_DIV_30
* @arg @ref LL_RCC_PLLP_DIV_31
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV));
}
#else
/**
* @brief Get Main PLL division factor for PLLP
* @note Used for PLLSAI3CLK (SAI1 and SAI2 clock)
* @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLP_DIV_7
* @arg @ref LL_RCC_PLLP_DIV_17
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP));
}
#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
/**
* @brief Get Main PLL division factor for PLLQ
* @note Used for PLL48M1CLK selected for USB, RNG, SDMMC (48 MHz clock)
* @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLQ_DIV_2
* @arg @ref LL_RCC_PLLQ_DIV_4
* @arg @ref LL_RCC_PLLQ_DIV_6
* @arg @ref LL_RCC_PLLQ_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ));
}
/**
* @brief Get Main PLL division factor for PLLR
* @note Used for PLLCLK (system clock)
* @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLR_DIV_2
* @arg @ref LL_RCC_PLLR_DIV_4
* @arg @ref LL_RCC_PLLR_DIV_6
* @arg @ref LL_RCC_PLLR_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR));
}
/**
* @brief Get Division factor for the main PLL and other PLL
* @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @arg @ref LL_RCC_PLLM_DIV_9 (*)
* @arg @ref LL_RCC_PLLM_DIV_10 (*)
* @arg @ref LL_RCC_PLLM_DIV_11 (*)
* @arg @ref LL_RCC_PLLM_DIV_12 (*)
* @arg @ref LL_RCC_PLLM_DIV_13 (*)
* @arg @ref LL_RCC_PLLM_DIV_14 (*)
* @arg @ref LL_RCC_PLLM_DIV_15 (*)
* @arg @ref LL_RCC_PLLM_DIV_16 (*)
*
* (*) value not defined in all devices.
*/
__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void)
{
return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM));
}
/**
* @brief Enable PLL output mapped on SAI domain clock
* @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SAI(void)
{
SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN);
}
/**
* @brief Disable PLL output mapped on SAI domain clock
* @note Cannot be disabled if the PLL clock is used as the system
* clock
* @note In order to save power, when the PLLCLK of the PLL is
* not used, should be 0
* @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SAI(void)
{
CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN);
}
/**
* @brief Enable PLL output mapped on 48MHz domain clock
* @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_48M
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_EnableDomain_48M(void)
{
SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN);
}
/**
* @brief Disable PLL output mapped on 48MHz domain clock
* @note Cannot be disabled if the PLL clock is used as the system
* clock
* @note In order to save power, when the PLLCLK of the PLL is
* not used, should be 0
* @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_48M
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_DisableDomain_48M(void)
{
CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN);
}
/**
* @brief Enable PLL output mapped on SYSCLK domain
* @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void)
{
SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN);
}
/**
* @brief Disable PLL output mapped on SYSCLK domain
* @note Cannot be disabled if the PLL clock is used as the system
* clock
* @note In order to save power, when the PLLCLK of the PLL is
* not used, Main PLL should be 0
* @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void)
{
CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN);
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_PLLSAI1 PLLSAI1
* @{
*/
/**
* @brief Enable PLLSAI1
* @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON);
}
/**
* @brief Disable PLLSAI1
* @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON);
}
/**
* @brief Check if PLLSAI1 Ready
* @rmtoll CR PLLSAI1RDY LL_RCC_PLLSAI1_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY));
}
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/**
* @brief Configure PLLSAI1 used for 48Mhz domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1M/PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled.
* @note This can be selected for USB, RNG, SDMMC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLQ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1Q_DIV_2
* @arg @ref LL_RCC_PLLSAI1Q_DIV_4
* @arg @ref LL_RCC_PLLSAI1Q_DIV_6
* @arg @ref LL_RCC_PLLSAI1Q_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q,
PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLQ);
}
#else
/**
* @brief Configure PLLSAI1 used for 48Mhz domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled.
* @note This can be selected for USB, RNG, SDMMC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n
* PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLQ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1Q_DIV_2
* @arg @ref LL_RCC_PLLSAI1Q_DIV_4
* @arg @ref LL_RCC_PLLSAI1Q_DIV_6
* @arg @ref LL_RCC_PLLSAI1Q_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLQ);
}
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
/**
* @brief Configure PLLSAI1 used for SAI domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1M/PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled.
* @note This can be selected for SAI1 or SAI2
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_2
* @arg @ref LL_RCC_PLLSAI1P_DIV_3
* @arg @ref LL_RCC_PLLSAI1P_DIV_4
* @arg @ref LL_RCC_PLLSAI1P_DIV_5
* @arg @ref LL_RCC_PLLSAI1P_DIV_6
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_8
* @arg @ref LL_RCC_PLLSAI1P_DIV_9
* @arg @ref LL_RCC_PLLSAI1P_DIV_10
* @arg @ref LL_RCC_PLLSAI1P_DIV_11
* @arg @ref LL_RCC_PLLSAI1P_DIV_12
* @arg @ref LL_RCC_PLLSAI1P_DIV_13
* @arg @ref LL_RCC_PLLSAI1P_DIV_14
* @arg @ref LL_RCC_PLLSAI1P_DIV_15
* @arg @ref LL_RCC_PLLSAI1P_DIV_16
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @arg @ref LL_RCC_PLLSAI1P_DIV_18
* @arg @ref LL_RCC_PLLSAI1P_DIV_19
* @arg @ref LL_RCC_PLLSAI1P_DIV_20
* @arg @ref LL_RCC_PLLSAI1P_DIV_21
* @arg @ref LL_RCC_PLLSAI1P_DIV_22
* @arg @ref LL_RCC_PLLSAI1P_DIV_23
* @arg @ref LL_RCC_PLLSAI1P_DIV_24
* @arg @ref LL_RCC_PLLSAI1P_DIV_25
* @arg @ref LL_RCC_PLLSAI1P_DIV_26
* @arg @ref LL_RCC_PLLSAI1P_DIV_27
* @arg @ref LL_RCC_PLLSAI1P_DIV_28
* @arg @ref LL_RCC_PLLSAI1P_DIV_29
* @arg @ref LL_RCC_PLLSAI1P_DIV_30
* @arg @ref LL_RCC_PLLSAI1P_DIV_31
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV,
PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
}
#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
/**
* @brief Configure PLLSAI1 used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled.
* @note This can be selected for SAI1 or SAI2 (*)
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_2
* @arg @ref LL_RCC_PLLSAI1P_DIV_3
* @arg @ref LL_RCC_PLLSAI1P_DIV_4
* @arg @ref LL_RCC_PLLSAI1P_DIV_5
* @arg @ref LL_RCC_PLLSAI1P_DIV_6
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_8
* @arg @ref LL_RCC_PLLSAI1P_DIV_9
* @arg @ref LL_RCC_PLLSAI1P_DIV_10
* @arg @ref LL_RCC_PLLSAI1P_DIV_11
* @arg @ref LL_RCC_PLLSAI1P_DIV_12
* @arg @ref LL_RCC_PLLSAI1P_DIV_13
* @arg @ref LL_RCC_PLLSAI1P_DIV_14
* @arg @ref LL_RCC_PLLSAI1P_DIV_15
* @arg @ref LL_RCC_PLLSAI1P_DIV_16
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @arg @ref LL_RCC_PLLSAI1P_DIV_18
* @arg @ref LL_RCC_PLLSAI1P_DIV_19
* @arg @ref LL_RCC_PLLSAI1P_DIV_20
* @arg @ref LL_RCC_PLLSAI1P_DIV_21
* @arg @ref LL_RCC_PLLSAI1P_DIV_22
* @arg @ref LL_RCC_PLLSAI1P_DIV_23
* @arg @ref LL_RCC_PLLSAI1P_DIV_24
* @arg @ref LL_RCC_PLLSAI1P_DIV_25
* @arg @ref LL_RCC_PLLSAI1P_DIV_26
* @arg @ref LL_RCC_PLLSAI1P_DIV_27
* @arg @ref LL_RCC_PLLSAI1P_DIV_28
* @arg @ref LL_RCC_PLLSAI1P_DIV_29
* @arg @ref LL_RCC_PLLSAI1P_DIV_30
* @arg @ref LL_RCC_PLLSAI1P_DIV_31
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV,
PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
}
#else
/**
* @brief Configure PLLSAI1 used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1N/PLLSAI1P can be written only when PLLSAI1 is disabled.
* @note This can be selected for SAI1 or SAI2 (*)
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
* PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
}
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT && RCC_PLLSAI1P_DIV_2_31_SUPPORT */
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/**
* @brief Configure PLLSAI1 used for ADC domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI1M/PLLSAI1N/PLLSAI1R can be written only when PLLSAI1 is disabled.
* @note This can be selected for ADC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1R_DIV_2
* @arg @ref LL_RCC_PLLSAI1R_DIV_4
* @arg @ref LL_RCC_PLLSAI1R_DIV_6
* @arg @ref LL_RCC_PLLSAI1R_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R,
PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLR);
}
#else
/**
* @brief Configure PLLSAI1 used for ADC domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLN/PLLR can be written only when PLLSAI1 is disabled.
* @note This can be selected for ADC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n
* PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1R_DIV_2
* @arg @ref LL_RCC_PLLSAI1R_DIV_4
* @arg @ref LL_RCC_PLLSAI1R_DIV_6
* @arg @ref LL_RCC_PLLSAI1R_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLR);
}
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
/**
* @brief Get SAI1PLL multiplication factor for VCO
* @rmtoll PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_GetN
* @retval Between 8 and 86
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetN(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos);
}
#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
/**
* @brief Get SAI1PLL division factor for PLLSAI1P
* @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock).
* @rmtoll PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_2
* @arg @ref LL_RCC_PLLSAI1P_DIV_3
* @arg @ref LL_RCC_PLLSAI1P_DIV_4
* @arg @ref LL_RCC_PLLSAI1P_DIV_5
* @arg @ref LL_RCC_PLLSAI1P_DIV_6
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_8
* @arg @ref LL_RCC_PLLSAI1P_DIV_9
* @arg @ref LL_RCC_PLLSAI1P_DIV_10
* @arg @ref LL_RCC_PLLSAI1P_DIV_11
* @arg @ref LL_RCC_PLLSAI1P_DIV_12
* @arg @ref LL_RCC_PLLSAI1P_DIV_13
* @arg @ref LL_RCC_PLLSAI1P_DIV_14
* @arg @ref LL_RCC_PLLSAI1P_DIV_15
* @arg @ref LL_RCC_PLLSAI1P_DIV_16
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
* @arg @ref LL_RCC_PLLSAI1P_DIV_18
* @arg @ref LL_RCC_PLLSAI1P_DIV_19
* @arg @ref LL_RCC_PLLSAI1P_DIV_20
* @arg @ref LL_RCC_PLLSAI1P_DIV_21
* @arg @ref LL_RCC_PLLSAI1P_DIV_22
* @arg @ref LL_RCC_PLLSAI1P_DIV_23
* @arg @ref LL_RCC_PLLSAI1P_DIV_24
* @arg @ref LL_RCC_PLLSAI1P_DIV_25
* @arg @ref LL_RCC_PLLSAI1P_DIV_26
* @arg @ref LL_RCC_PLLSAI1P_DIV_27
* @arg @ref LL_RCC_PLLSAI1P_DIV_28
* @arg @ref LL_RCC_PLLSAI1P_DIV_29
* @arg @ref LL_RCC_PLLSAI1P_DIV_30
* @arg @ref LL_RCC_PLLSAI1P_DIV_31
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV));
}
#else
/**
* @brief Get SAI1PLL division factor for PLLSAI1P
* @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock).
* @rmtoll PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1P_DIV_7
* @arg @ref LL_RCC_PLLSAI1P_DIV_17
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P));
}
#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
/**
* @brief Get SAI1PLL division factor for PLLSAI1Q
* @note Used PLL48M2CLK selected for USB, RNG, SDMMC (48 MHz clock)
* @rmtoll PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_GetQ
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1Q_DIV_2
* @arg @ref LL_RCC_PLLSAI1Q_DIV_4
* @arg @ref LL_RCC_PLLSAI1Q_DIV_6
* @arg @ref LL_RCC_PLLSAI1Q_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetQ(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q));
}
/**
* @brief Get PLLSAI1 division factor for PLLSAIR
* @note Used for PLLADC1CLK (ADC clock)
* @rmtoll PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_GetR
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1R_DIV_2
* @arg @ref LL_RCC_PLLSAI1R_DIV_4
* @arg @ref LL_RCC_PLLSAI1R_DIV_6
* @arg @ref LL_RCC_PLLSAI1R_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetR(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R));
}
#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
/**
* @brief Get Division factor for the PLLSAI1
* @rmtoll PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_GetDivider
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI1M_DIV_1
* @arg @ref LL_RCC_PLLSAI1M_DIV_2
* @arg @ref LL_RCC_PLLSAI1M_DIV_3
* @arg @ref LL_RCC_PLLSAI1M_DIV_4
* @arg @ref LL_RCC_PLLSAI1M_DIV_5
* @arg @ref LL_RCC_PLLSAI1M_DIV_6
* @arg @ref LL_RCC_PLLSAI1M_DIV_7
* @arg @ref LL_RCC_PLLSAI1M_DIV_8
* @arg @ref LL_RCC_PLLSAI1M_DIV_9
* @arg @ref LL_RCC_PLLSAI1M_DIV_10
* @arg @ref LL_RCC_PLLSAI1M_DIV_11
* @arg @ref LL_RCC_PLLSAI1M_DIV_12
* @arg @ref LL_RCC_PLLSAI1M_DIV_13
* @arg @ref LL_RCC_PLLSAI1M_DIV_14
* @arg @ref LL_RCC_PLLSAI1M_DIV_15
* @arg @ref LL_RCC_PLLSAI1M_DIV_16
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetDivider(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M));
}
#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
/**
* @brief Enable PLLSAI1 output mapped on SAI domain clock
* @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_EnableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_SAI(void)
{
SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN);
}
/**
* @brief Disable PLLSAI1 output mapped on SAI domain clock
* @note In order to save power, when of the PLLSAI1 is
* not used, should be 0
* @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_DisableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_SAI(void)
{
CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN);
}
/**
* @brief Enable PLLSAI1 output mapped on 48MHz domain clock
* @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_EnableDomain_48M
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_48M(void)
{
SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN);
}
/**
* @brief Disable PLLSAI1 output mapped on 48MHz domain clock
* @note In order to save power, when of the PLLSAI1 is
* not used, should be 0
* @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_DisableDomain_48M
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_48M(void)
{
CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN);
}
/**
* @brief Enable PLLSAI1 output mapped on ADC domain clock
* @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_EnableDomain_ADC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_ADC(void)
{
SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN);
}
/**
* @brief Disable PLLSAI1 output mapped on ADC domain clock
* @note In order to save power, when of the PLLSAI1 is
* not used, Main PLLSAI1 should be 0
* @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_DisableDomain_ADC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_ADC(void)
{
CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN);
}
/**
* @}
*/
#if defined(RCC_PLLSAI2_SUPPORT)
/** @defgroup RCC_LL_EF_PLLSAI2 PLLSAI2
* @{
*/
/**
* @brief Enable PLLSAI2
* @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Enable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_Enable(void)
{
SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON);
}
/**
* @brief Disable PLLSAI2
* @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Disable
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_Disable(void)
{
CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON);
}
/**
* @brief Check if PLLSAI2 Ready
* @rmtoll CR PLLSAI2RDY LL_RCC_PLLSAI2_IsReady
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsReady(void)
{
return (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY));
}
#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
/**
* @brief Configure PLLSAI2 used for SAI domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI2M/PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled.
* @note This can be selected for SAI1 or SAI2
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_2
* @arg @ref LL_RCC_PLLSAI2P_DIV_3
* @arg @ref LL_RCC_PLLSAI2P_DIV_4
* @arg @ref LL_RCC_PLLSAI2P_DIV_5
* @arg @ref LL_RCC_PLLSAI2P_DIV_6
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_8
* @arg @ref LL_RCC_PLLSAI2P_DIV_9
* @arg @ref LL_RCC_PLLSAI2P_DIV_10
* @arg @ref LL_RCC_PLLSAI2P_DIV_11
* @arg @ref LL_RCC_PLLSAI2P_DIV_12
* @arg @ref LL_RCC_PLLSAI2P_DIV_13
* @arg @ref LL_RCC_PLLSAI2P_DIV_14
* @arg @ref LL_RCC_PLLSAI2P_DIV_15
* @arg @ref LL_RCC_PLLSAI2P_DIV_16
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @arg @ref LL_RCC_PLLSAI2P_DIV_18
* @arg @ref LL_RCC_PLLSAI2P_DIV_19
* @arg @ref LL_RCC_PLLSAI2P_DIV_20
* @arg @ref LL_RCC_PLLSAI2P_DIV_21
* @arg @ref LL_RCC_PLLSAI2P_DIV_22
* @arg @ref LL_RCC_PLLSAI2P_DIV_23
* @arg @ref LL_RCC_PLLSAI2P_DIV_24
* @arg @ref LL_RCC_PLLSAI2P_DIV_25
* @arg @ref LL_RCC_PLLSAI2P_DIV_26
* @arg @ref LL_RCC_PLLSAI2P_DIV_27
* @arg @ref LL_RCC_PLLSAI2P_DIV_28
* @arg @ref LL_RCC_PLLSAI2P_DIV_29
* @arg @ref LL_RCC_PLLSAI2P_DIV_30
* @arg @ref LL_RCC_PLLSAI2P_DIV_31
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV,
PLLM | PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
}
#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
/**
* @brief Configure PLLSAI2 used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI1 and PLLSAI2 are disabled.
* @note PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled.
* @note This can be selected for SAI1 or SAI2
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_2
* @arg @ref LL_RCC_PLLSAI2P_DIV_3
* @arg @ref LL_RCC_PLLSAI2P_DIV_4
* @arg @ref LL_RCC_PLLSAI2P_DIV_5
* @arg @ref LL_RCC_PLLSAI2P_DIV_6
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_8
* @arg @ref LL_RCC_PLLSAI2P_DIV_9
* @arg @ref LL_RCC_PLLSAI2P_DIV_10
* @arg @ref LL_RCC_PLLSAI2P_DIV_11
* @arg @ref LL_RCC_PLLSAI2P_DIV_12
* @arg @ref LL_RCC_PLLSAI2P_DIV_13
* @arg @ref LL_RCC_PLLSAI2P_DIV_14
* @arg @ref LL_RCC_PLLSAI2P_DIV_15
* @arg @ref LL_RCC_PLLSAI2P_DIV_16
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @arg @ref LL_RCC_PLLSAI2P_DIV_18
* @arg @ref LL_RCC_PLLSAI2P_DIV_19
* @arg @ref LL_RCC_PLLSAI2P_DIV_20
* @arg @ref LL_RCC_PLLSAI2P_DIV_21
* @arg @ref LL_RCC_PLLSAI2P_DIV_22
* @arg @ref LL_RCC_PLLSAI2P_DIV_23
* @arg @ref LL_RCC_PLLSAI2P_DIV_24
* @arg @ref LL_RCC_PLLSAI2P_DIV_25
* @arg @ref LL_RCC_PLLSAI2P_DIV_26
* @arg @ref LL_RCC_PLLSAI2P_DIV_27
* @arg @ref LL_RCC_PLLSAI2P_DIV_28
* @arg @ref LL_RCC_PLLSAI2P_DIV_29
* @arg @ref LL_RCC_PLLSAI2P_DIV_30
* @arg @ref LL_RCC_PLLSAI2P_DIV_31
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
}
#else
/**
* @brief Configure PLLSAI2 used for SAI domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI2 and PLLSAI2 are disabled.
* @note PLLSAI2N/PLLSAI2P can be written only when PLLSAI2 is disabled.
* @note This can be selected for SAI1 or SAI2
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
* PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_ConfigDomain_SAI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLP This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
}
#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2P_DIV_2_31_SUPPORT */
#if defined(DSI)
/**
* @brief Configure PLLSAI2 used for DSI domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI2M/PLLSAI2N/PLLSAI2Q can be written only when PLLSAI2 is disabled.
* @note This can be selected for DSI
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_DSI\n
* PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_DSI\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_DSI\n
* PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_ConfigDomain_DSI
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLQ This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2Q_DIV_2
* @arg @ref LL_RCC_PLLSAI2Q_DIV_4
* @arg @ref LL_RCC_PLLSAI2Q_DIV_6
* @arg @ref LL_RCC_PLLSAI2Q_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLQ | PLLM);
}
#endif /* DSI */
#if defined(LTDC)
/**
* @brief Configure PLLSAI2 used for LTDC domain clock
* @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
* @note PLLSAI2M/PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled.
* @note This can be selected for LTDC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
* PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
* PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
* CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_ConfigDomain_LTDC
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
* @param PLLN Between 8 and 86
* @param PLLR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2R_DIV_2
* @arg @ref LL_RCC_PLLSAI2R_DIV_4
* @arg @ref LL_RCC_PLLSAI2R_DIV_6
* @arg @ref LL_RCC_PLLSAI2R_DIV_8
* @param PLLDIVR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLR | PLLM);
MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, PLLDIVR);
}
#else
/**
* @brief Configure PLLSAI2 used for ADC domain clock
* @note PLL Source and PLLM Divider can be written only when PLL,
* PLLSAI2 and PLLSAI2 are disabled.
* @note PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled.
* @note This can be selected for ADC
* @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_ADC\n
* PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_ADC\n
* PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_ADC\n
* PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_ADC
* @param Source This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSOURCE_NONE
* @arg @ref LL_RCC_PLLSOURCE_MSI
* @arg @ref LL_RCC_PLLSOURCE_HSI
* @arg @ref LL_RCC_PLLSOURCE_HSE
* @param PLLM This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLM_DIV_1
* @arg @ref LL_RCC_PLLM_DIV_2
* @arg @ref LL_RCC_PLLM_DIV_3
* @arg @ref LL_RCC_PLLM_DIV_4
* @arg @ref LL_RCC_PLLM_DIV_5
* @arg @ref LL_RCC_PLLM_DIV_6
* @arg @ref LL_RCC_PLLM_DIV_7
* @arg @ref LL_RCC_PLLM_DIV_8
* @param PLLN Between 8 and 86
* @param PLLR This parameter can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2R_DIV_2
* @arg @ref LL_RCC_PLLSAI2R_DIV_4
* @arg @ref LL_RCC_PLLSAI2R_DIV_6
* @arg @ref LL_RCC_PLLSAI2R_DIV_8
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
{
MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLR);
}
#endif /* LTDC */
/**
* @brief Get SAI2PLL multiplication factor for VCO
* @rmtoll PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_GetN
* @retval Between 8 and 86
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetN(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos);
}
#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
/**
* @brief Get SAI2PLL division factor for PLLSAI2P
* @note Used for PLLSAI2CLK (SAI1 or SAI2 clock).
* @rmtoll PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_2
* @arg @ref LL_RCC_PLLSAI2P_DIV_3
* @arg @ref LL_RCC_PLLSAI2P_DIV_4
* @arg @ref LL_RCC_PLLSAI2P_DIV_5
* @arg @ref LL_RCC_PLLSAI2P_DIV_6
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_8
* @arg @ref LL_RCC_PLLSAI2P_DIV_9
* @arg @ref LL_RCC_PLLSAI2P_DIV_10
* @arg @ref LL_RCC_PLLSAI2P_DIV_11
* @arg @ref LL_RCC_PLLSAI2P_DIV_12
* @arg @ref LL_RCC_PLLSAI2P_DIV_13
* @arg @ref LL_RCC_PLLSAI2P_DIV_14
* @arg @ref LL_RCC_PLLSAI2P_DIV_15
* @arg @ref LL_RCC_PLLSAI2P_DIV_16
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
* @arg @ref LL_RCC_PLLSAI2P_DIV_18
* @arg @ref LL_RCC_PLLSAI2P_DIV_19
* @arg @ref LL_RCC_PLLSAI2P_DIV_20
* @arg @ref LL_RCC_PLLSAI2P_DIV_21
* @arg @ref LL_RCC_PLLSAI2P_DIV_22
* @arg @ref LL_RCC_PLLSAI2P_DIV_23
* @arg @ref LL_RCC_PLLSAI2P_DIV_24
* @arg @ref LL_RCC_PLLSAI2P_DIV_25
* @arg @ref LL_RCC_PLLSAI2P_DIV_26
* @arg @ref LL_RCC_PLLSAI2P_DIV_27
* @arg @ref LL_RCC_PLLSAI2P_DIV_28
* @arg @ref LL_RCC_PLLSAI2P_DIV_29
* @arg @ref LL_RCC_PLLSAI2P_DIV_30
* @arg @ref LL_RCC_PLLSAI2P_DIV_31
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV));
}
#else
/**
* @brief Get SAI2PLL division factor for PLLSAI2P
* @note Used for PLLSAI2CLK (SAI1 or SAI2 clock).
* @rmtoll PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_GetP
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2P_DIV_7
* @arg @ref LL_RCC_PLLSAI2P_DIV_17
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P));
}
#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
/**
* @brief Get division factor for PLLSAI2Q
* @note Used for PLLDSICLK (DSI clock)
* @rmtoll PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_GetQ
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2Q_DIV_2
* @arg @ref LL_RCC_PLLSAI2Q_DIV_4
* @arg @ref LL_RCC_PLLSAI2Q_DIV_6
* @arg @ref LL_RCC_PLLSAI2Q_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetQ(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q));
}
#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
/**
* @brief Get SAI2PLL division factor for PLLSAI2R
* @note Used for PLLADC2CLK (ADC clock) or PLLLCDCLK (LTDC clock) depending on devices
* @rmtoll PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_GetR
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2R_DIV_2
* @arg @ref LL_RCC_PLLSAI2R_DIV_4
* @arg @ref LL_RCC_PLLSAI2R_DIV_6
* @arg @ref LL_RCC_PLLSAI2R_DIV_8
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetR(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R));
}
#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
/**
* @brief Get Division factor for the PLLSAI2
* @rmtoll PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_GetDivider
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2M_DIV_1
* @arg @ref LL_RCC_PLLSAI2M_DIV_2
* @arg @ref LL_RCC_PLLSAI2M_DIV_3
* @arg @ref LL_RCC_PLLSAI2M_DIV_4
* @arg @ref LL_RCC_PLLSAI2M_DIV_5
* @arg @ref LL_RCC_PLLSAI2M_DIV_6
* @arg @ref LL_RCC_PLLSAI2M_DIV_7
* @arg @ref LL_RCC_PLLSAI2M_DIV_8
* @arg @ref LL_RCC_PLLSAI2M_DIV_9
* @arg @ref LL_RCC_PLLSAI2M_DIV_10
* @arg @ref LL_RCC_PLLSAI2M_DIV_11
* @arg @ref LL_RCC_PLLSAI2M_DIV_12
* @arg @ref LL_RCC_PLLSAI2M_DIV_13
* @arg @ref LL_RCC_PLLSAI2M_DIV_14
* @arg @ref LL_RCC_PLLSAI2M_DIV_15
* @arg @ref LL_RCC_PLLSAI2M_DIV_16
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDivider(void)
{
return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M));
}
#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
#if defined(RCC_CCIPR2_PLLSAI2DIVR)
/**
* @brief Get PLLSAI2 division factor for PLLSAI2DIVR
* @note Used for LTDC domain clock
* @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_GetDIVR
* @retval Returned value can be one of the following values:
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
* @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
*/
__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDIVR(void)
{
return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR));
}
#endif /* RCC_CCIPR2_PLLSAI2DIVR */
/**
* @brief Enable PLLSAI2 output mapped on SAI domain clock
* @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_EnableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_SAI(void)
{
SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN);
}
/**
* @brief Disable PLLSAI2 output mapped on SAI domain clock
* @note In order to save power, when of the PLLSAI2 is
* not used, should be 0
* @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_DisableDomain_SAI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_SAI(void)
{
CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN);
}
#if defined(DSI)
/**
* @brief Enable PLLSAI2 output mapped on DSI domain clock
* @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_EnableDomain_DSI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_DSI(void)
{
SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN);
}
/**
* @brief Disable PLLSAI2 output mapped on DSI domain clock
* @note In order to save power, when of the PLLSAI2 is
* not used, Main PLLSAI2 should be 0
* @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_DisableDomain_DSI
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_DSI(void)
{
CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN);
}
#endif /* DSI */
#if defined(LTDC)
/**
* @brief Enable PLLSAI2 output mapped on LTDC domain clock
* @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_LTDC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_LTDC(void)
{
SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
}
/**
* @brief Disable PLLSAI2 output mapped on LTDC domain clock
* @note In order to save power, when of the PLLSAI2 is
* not used, Main PLLSAI2 should be 0
* @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_LTDC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_LTDC(void)
{
CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
}
#else
/**
* @brief Enable PLLSAI2 output mapped on ADC domain clock
* @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_ADC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_ADC(void)
{
SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
}
/**
* @brief Disable PLLSAI2 output mapped on ADC domain clock
* @note In order to save power, when of the PLLSAI2 is
* not used, Main PLLSAI2 should be 0
* @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_ADC
* @retval None
*/
__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_ADC(void)
{
CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
}
#endif /* LTDC */
/**
* @}
*/
#endif /* RCC_PLLSAI2_SUPPORT */
/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
* @{
*/
/**
* @brief Clear LSI ready interrupt flag
* @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC);
}
/**
* @brief Clear LSE ready interrupt flag
* @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_LSERDYC);
}
/**
* @brief Clear MSI ready interrupt flag
* @rmtoll CICR MSIRDYC LL_RCC_ClearFlag_MSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_MSIRDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_MSIRDYC);
}
/**
* @brief Clear HSI ready interrupt flag
* @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC);
}
/**
* @brief Clear HSE ready interrupt flag
* @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_HSERDYC);
}
/**
* @brief Clear PLL ready interrupt flag
* @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC);
}
#if defined(RCC_HSI48_SUPPORT)
/**
* @brief Clear HSI48 ready interrupt flag
* @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC);
}
#endif /* RCC_HSI48_SUPPORT */
/**
* @brief Clear PLLSAI1 ready interrupt flag
* @rmtoll CICR PLLSAI1RDYC LL_RCC_ClearFlag_PLLSAI1RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI1RDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_PLLSAI1RDYC);
}
#if defined(RCC_PLLSAI2_SUPPORT)
/**
* @brief Clear PLLSAI1 ready interrupt flag
* @rmtoll CICR PLLSAI2RDYC LL_RCC_ClearFlag_PLLSAI2RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI2RDY(void)
{
SET_BIT(RCC->CICR, RCC_CICR_PLLSAI2RDYC);
}
#endif /* RCC_PLLSAI2_SUPPORT */
/**
* @brief Clear Clock security system interrupt flag
* @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
{
SET_BIT(RCC->CICR, RCC_CICR_CSSC);
}
/**
* @brief Clear LSE Clock security system interrupt flag
* @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void)
{
SET_BIT(RCC->CICR, RCC_CICR_LSECSSC);
}
/**
* @brief Check if LSI ready interrupt occurred or not
* @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF));
}
/**
* @brief Check if LSE ready interrupt occurred or not
* @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF));
}
/**
* @brief Check if MSI ready interrupt occurred or not
* @rmtoll CIFR MSIRDYF LL_RCC_IsActiveFlag_MSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIRDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_MSIRDYF) == (RCC_CIFR_MSIRDYF));
}
/**
* @brief Check if HSI ready interrupt occurred or not
* @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF));
}
/**
* @brief Check if HSE ready interrupt occurred or not
* @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF));
}
/**
* @brief Check if PLL ready interrupt occurred or not
* @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF));
}
#if defined(RCC_HSI48_SUPPORT)
/**
* @brief Check if HSI48 ready interrupt occurred or not
* @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF));
}
#endif /* RCC_HSI48_SUPPORT */
/**
* @brief Check if PLLSAI1 ready interrupt occurred or not
* @rmtoll CIFR PLLSAI1RDYF LL_RCC_IsActiveFlag_PLLSAI1RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI1RDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == (RCC_CIFR_PLLSAI1RDYF));
}
#if defined(RCC_PLLSAI2_SUPPORT)
/**
* @brief Check if PLLSAI1 ready interrupt occurred or not
* @rmtoll CIFR PLLSAI2RDYF LL_RCC_IsActiveFlag_PLLSAI2RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI2RDY(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == (RCC_CIFR_PLLSAI2RDYF));
}
#endif /* RCC_PLLSAI2_SUPPORT */
/**
* @brief Check if Clock security system interrupt occurred or not
* @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF));
}
/**
* @brief Check if LSE Clock security system interrupt occurred or not
* @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void)
{
return (READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF));
}
/**
* @brief Check if RCC flag FW reset is set or not.
* @rmtoll CSR FWRSTF LL_RCC_IsActiveFlag_FWRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_FWRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_FWRSTF) == (RCC_CSR_FWRSTF));
}
/**
* @brief Check if RCC flag Independent Watchdog reset is set or not.
* @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
}
/**
* @brief Check if RCC flag Low Power reset is set or not.
* @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
}
/**
* @brief Check if RCC flag is set or not.
* @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF));
}
/**
* @brief Check if RCC flag Pin reset is set or not.
* @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
}
/**
* @brief Check if RCC flag Software reset is set or not.
* @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
}
/**
* @brief Check if RCC flag Window Watchdog reset is set or not.
* @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
}
/**
* @brief Check if RCC flag BOR reset is set or not.
* @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void)
{
return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF));
}
/**
* @brief Set RMVF bit to clear the reset flags.
* @rmtoll CSR RMVF LL_RCC_ClearResetFlags
* @retval None
*/
__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
{
SET_BIT(RCC->CSR, RCC_CSR_RMVF);
}
/**
* @}
*/
/** @defgroup RCC_LL_EF_IT_Management IT Management
* @{
*/
/**
* @brief Enable LSI ready interrupt
* @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
}
/**
* @brief Enable LSE ready interrupt
* @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
}
/**
* @brief Enable MSI ready interrupt
* @rmtoll CIER MSIRDYIE LL_RCC_EnableIT_MSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_MSIRDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_MSIRDYIE);
}
/**
* @brief Enable HSI ready interrupt
* @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
}
/**
* @brief Enable HSE ready interrupt
* @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
}
/**
* @brief Enable PLL ready interrupt
* @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE);
}
#if defined(RCC_HSI48_SUPPORT)
/**
* @brief Enable HSI48 ready interrupt
* @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
}
#endif /* RCC_HSI48_SUPPORT */
/**
* @brief Enable PLLSAI1 ready interrupt
* @rmtoll CIER PLLSAI1RDYIE LL_RCC_EnableIT_PLLSAI1RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI1RDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE);
}
#if defined(RCC_PLLSAI2_SUPPORT)
/**
* @brief Enable PLLSAI2 ready interrupt
* @rmtoll CIER PLLSAI2RDYIE LL_RCC_EnableIT_PLLSAI2RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI2RDY(void)
{
SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE);
}
#endif /* RCC_PLLSAI2_SUPPORT */
/**
* @brief Enable LSE clock security system interrupt
* @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void)
{
SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE);
}
/**
* @brief Disable LSI ready interrupt
* @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
}
/**
* @brief Disable LSE ready interrupt
* @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
}
/**
* @brief Disable MSI ready interrupt
* @rmtoll CIER MSIRDYIE LL_RCC_DisableIT_MSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_MSIRDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_MSIRDYIE);
}
/**
* @brief Disable HSI ready interrupt
* @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
}
/**
* @brief Disable HSE ready interrupt
* @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
}
/**
* @brief Disable PLL ready interrupt
* @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE);
}
#if defined(RCC_HSI48_SUPPORT)
/**
* @brief Disable HSI48 ready interrupt
* @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
}
#endif /* RCC_HSI48_SUPPORT */
/**
* @brief Disable PLLSAI1 ready interrupt
* @rmtoll CIER PLLSAI1RDYIE LL_RCC_DisableIT_PLLSAI1RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI1RDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE);
}
#if defined(RCC_PLLSAI2_SUPPORT)
/**
* @brief Disable PLLSAI2 ready interrupt
* @rmtoll CIER PLLSAI2RDYIE LL_RCC_DisableIT_PLLSAI2RDY
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI2RDY(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE);
}
#endif /* RCC_PLLSAI2_SUPPORT */
/**
* @brief Disable LSE clock security system interrupt
* @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS
* @retval None
*/
__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void)
{
CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE);
}
/**
* @brief Checks if LSI ready interrupt source is enabled or disabled.
* @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE));
}
/**
* @brief Checks if LSE ready interrupt source is enabled or disabled.
* @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE));
}
/**
* @brief Checks if MSI ready interrupt source is enabled or disabled.
* @rmtoll CIER MSIRDYIE LL_RCC_IsEnabledIT_MSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIRDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_MSIRDYIE) == (RCC_CIER_MSIRDYIE));
}
/**
* @brief Checks if HSI ready interrupt source is enabled or disabled.
* @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE));
}
/**
* @brief Checks if HSE ready interrupt source is enabled or disabled.
* @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE));
}
/**
* @brief Checks if PLL ready interrupt source is enabled or disabled.
* @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE));
}
#if defined(RCC_HSI48_SUPPORT)
/**
* @brief Checks if HSI48 ready interrupt source is enabled or disabled.
* @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE));
}
#endif /* RCC_HSI48_SUPPORT */
/**
* @brief Checks if PLLSAI1 ready interrupt source is enabled or disabled.
* @rmtoll CIER PLLSAI1RDYIE LL_RCC_IsEnabledIT_PLLSAI1RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI1RDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) == (RCC_CIER_PLLSAI1RDYIE));
}
#if defined(RCC_PLLSAI2_SUPPORT)
/**
* @brief Checks if PLLSAI2 ready interrupt source is enabled or disabled.
* @rmtoll CIER PLLSAI2RDYIE LL_RCC_IsEnabledIT_PLLSAI2RDY
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI2RDY(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) == (RCC_CIER_PLLSAI2RDYIE));
}
#endif /* RCC_PLLSAI2_SUPPORT */
/**
* @brief Checks if LSECSS interrupt source is enabled or disabled.
* @rmtoll CIER LSECSSIE LL_RCC_IsEnabledIT_LSECSS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSECSS(void)
{
return (READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == (RCC_CIER_LSECSSIE));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup RCC_LL_EF_Init De-initialization function
* @{
*/
ErrorStatus LL_RCC_DeInit(void);
/**
* @}
*/
/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
* @{
*/
void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
#if defined(UART4) || defined(UART5)
uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
#endif /* UART4 || UART5 */
uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource);
uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource);
uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource);
#if defined(RCC_CCIPR2_SDMMCSEL)
uint32_t LL_RCC_GetSDMMCKernelClockFreq(uint32_t SDMMCxSource);
#endif
uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource);
uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource);
#if defined(USB_OTG_FS) || defined(USB)
uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
#endif /* USB_OTG_FS || USB */
uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource);
#if defined(SWPMI1)
uint32_t LL_RCC_GetSWPMIClockFreq(uint32_t SWPMIxSource);
#endif /* SWPMI1 */
#if defined(DFSDM1_Channel0)
uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource);
#if defined(RCC_CCIPR2_DFSDM1SEL)
uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource);
#endif /* RCC_CCIPR2_DFSDM1SEL */
#endif /* DFSDM1_Channel0 */
#if defined(LTDC)
uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource);
#endif /* LTDC */
#if defined(DSI)
uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource);
#endif /* DSI */
#if defined(OCTOSPI1)
uint32_t LL_RCC_GetOCTOSPIClockFreq(uint32_t OCTOSPIxSource);
#endif /* OCTOSPI1 */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/**
* @}
*/
/**
* @}
*/
#endif /* defined(RCC) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L4xx_LL_RCC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
