mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_IAR/stm32l4xx_ll_pwr.h
- Committer:
- AnnaBridge
- Date:
- 2018-11-08
- Revision:
- 171:3a7713b1edbc
- Parent:
- TARGET_DISCO_L496AG/TARGET_STM/TARGET_STM32L4/device/stm32l4xx_ll_pwr.h@ 165:d1b4690b3f8b
File content as of revision 171:3a7713b1edbc:
/**
******************************************************************************
* @file stm32l4xx_ll_pwr.h
* @author MCD Application Team
* @brief Header file of PWR LL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L4xx_LL_PWR_H
#define __STM32L4xx_LL_PWR_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx.h"
/** @addtogroup STM32L4xx_LL_Driver
* @{
*/
#if defined(PWR)
/** @defgroup PWR_LL PWR
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
* @{
*/
/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
* @brief Flags defines which can be used with LL_PWR_WriteReg function
* @{
*/
#define LL_PWR_SCR_CSBF PWR_SCR_CSBF
#define LL_PWR_SCR_CWUF PWR_SCR_CWUF
#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5
#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4
#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3
#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2
#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1
/**
* @}
*/
/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
* @brief Flags defines which can be used with LL_PWR_ReadReg function
* @{
*/
#define LL_PWR_SR1_WUFI PWR_SR1_WUFI
#define LL_PWR_SR1_SBF PWR_SR1_SBF
#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5
#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4
#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3
#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2
#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1
#if defined(PWR_SR2_PVMO4)
#define LL_PWR_SR2_PVMO4 PWR_SR2_PVMO4
#endif /* PWR_SR2_PVMO4 */
#if defined(PWR_SR2_PVMO3)
#define LL_PWR_SR2_PVMO3 PWR_SR2_PVMO3
#endif /* PWR_SR2_PVMO3 */
#if defined(PWR_SR2_PVMO2)
#define LL_PWR_SR2_PVMO2 PWR_SR2_PVMO2
#endif /* PWR_SR2_PVMO2 */
#if defined(PWR_SR2_PVMO1)
#define LL_PWR_SR2_PVMO1 PWR_SR2_PVMO1
#endif /* PWR_SR2_PVMO1 */
#define LL_PWR_SR2_PVDO PWR_SR2_PVDO
#define LL_PWR_SR2_VOSF PWR_SR2_VOSF
#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF
#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS
/**
* @}
*/
/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE
* @{
*/
#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR1_VOS_0)
#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR1_VOS_1)
/**
* @}
*/
/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR
* @{
*/
#define LL_PWR_MODE_STOP0 (PWR_CR1_LPMS_STOP0)
#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_STOP1)
#define LL_PWR_MODE_STOP2 (PWR_CR1_LPMS_STOP2)
#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_STANDBY)
#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_SHUTDOWN)
/**
* @}
*/
/** @defgroup PWR_LL_EC_PVM_VDDUSB_1 Peripheral voltage monitoring
* @{
*/
#if defined(PWR_CR2_PVME1)
#define LL_PWR_PVM_VDDUSB_1_2V (PWR_CR2_PVME1) /* Monitoring VDDUSB vs. 1.2V */
#endif
#if defined(PWR_CR2_PVME2)
#define LL_PWR_PVM_VDDIO2_0_9V (PWR_CR2_PVME2) /* Monitoring VDDIO2 vs. 0.9V */
#endif
#if defined(PWR_CR2_PVME3)
#define LL_PWR_PVM_VDDA_1_62V (PWR_CR2_PVME3) /* Monitoring VDDA vs. 1.62V */
#endif
#if defined(PWR_CR2_PVME4)
#define LL_PWR_PVM_VDDA_2_2V (PWR_CR2_PVME4) /* Monitoring VDDA vs. 2.2V */
#endif
/**
* @}
*/
/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL
* @{
*/
#define LL_PWR_PVDLEVEL_0 (PWR_CR2_PLS_LEV0) /* VPVD0 around 2.0 V */
#define LL_PWR_PVDLEVEL_1 (PWR_CR2_PLS_LEV1) /* VPVD1 around 2.2 V */
#define LL_PWR_PVDLEVEL_2 (PWR_CR2_PLS_LEV2) /* VPVD2 around 2.4 V */
#define LL_PWR_PVDLEVEL_3 (PWR_CR2_PLS_LEV3) /* VPVD3 around 2.5 V */
#define LL_PWR_PVDLEVEL_4 (PWR_CR2_PLS_LEV4) /* VPVD4 around 2.6 V */
#define LL_PWR_PVDLEVEL_5 (PWR_CR2_PLS_LEV5) /* VPVD5 around 2.8 V */
#define LL_PWR_PVDLEVEL_6 (PWR_CR2_PLS_LEV6) /* VPVD6 around 2.9 V */
#define LL_PWR_PVDLEVEL_7 (PWR_CR2_PLS_LEV7) /* External input analog voltage (Compare internally to VREFINT) */
/**
* @}
*/
/** @defgroup PWR_LL_EC_WAKEUP WAKEUP
* @{
*/
#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1)
#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2)
#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3)
#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4)
#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5)
/**
* @}
*/
/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR
* @{
*/
#define LL_PWR_BATT_CHARG_RESISTOR_5K (0x00000000U)
#define LL_PWR_BATT_CHARGRESISTOR_1_5K (PWR_CR4_VBRS)
/**
* @}
*/
/** @defgroup PWR_LL_EC_GPIO GPIO
* @{
*/
#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA)))
#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB)))
#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC)))
#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD)))
#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE)))
#if defined(GPIOF)
#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF)))
#endif
#if defined(GPIOG)
#define LL_PWR_GPIO_G ((uint32_t)(&(PWR->PUCRG)))
#endif
#if defined(GPIOH)
#define LL_PWR_GPIO_H ((uint32_t)(&(PWR->PUCRH)))
#endif
#if defined(GPIOI)
#define LL_PWR_GPIO_I ((uint32_t)(&(PWR->PUCRI)))
#endif
/**
* @}
*/
/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT
* @{
*/
#define LL_PWR_GPIO_BIT_0 (0x00000001U)
#define LL_PWR_GPIO_BIT_1 (0x00000002U)
#define LL_PWR_GPIO_BIT_2 (0x00000004U)
#define LL_PWR_GPIO_BIT_3 (0x00000008U)
#define LL_PWR_GPIO_BIT_4 (0x00000010U)
#define LL_PWR_GPIO_BIT_5 (0x00000020U)
#define LL_PWR_GPIO_BIT_6 (0x00000040U)
#define LL_PWR_GPIO_BIT_7 (0x00000080U)
#define LL_PWR_GPIO_BIT_8 (0x00000100U)
#define LL_PWR_GPIO_BIT_9 (0x00000200U)
#define LL_PWR_GPIO_BIT_10 (0x00000400U)
#define LL_PWR_GPIO_BIT_11 (0x00000800U)
#define LL_PWR_GPIO_BIT_12 (0x00001000U)
#define LL_PWR_GPIO_BIT_13 (0x00002000U)
#define LL_PWR_GPIO_BIT_14 (0x00004000U)
#define LL_PWR_GPIO_BIT_15 (0x00008000U)
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
* @{
*/
/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros
* @{
*/
/**
* @brief Write a value in PWR register
* @param __REG__ Register to be written
* @param __VALUE__ Value to be written in the register
* @retval None
*/
#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
/**
* @brief Read a value in PWR register
* @param __REG__ Register to be read
* @retval Register value
*/
#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
* @{
*/
/** @defgroup PWR_LL_EF_Configuration Configuration
* @{
*/
/**
* @brief Switch the regulator from main mode to low-power mode
* @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void)
{
SET_BIT(PWR->CR1, PWR_CR1_LPR);
}
/**
* @brief Switch the regulator from low-power mode to main mode
* @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void)
{
CLEAR_BIT(PWR->CR1, PWR_CR1_LPR);
}
/**
* @brief Switch from run main mode to run low-power mode.
* @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void)
{
LL_PWR_EnableLowPowerRunMode();
}
/**
* @brief Switch from run main mode to low-power mode.
* @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void)
{
LL_PWR_DisableLowPowerRunMode();
}
/**
* @brief Check if the regulator is in low-power mode
* @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void)
{
return (READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR));
}
/**
* @brief Set the main internal regulator output voltage
* @note This configuration may be completed with LL_PWR_EnableRange1BoostMode() on STM32L4Rx/STM32L4Sx devices.
* @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling
* @param VoltageScaling This parameter can be one of the following values:
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling)
{
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling);
}
/**
* @brief Get the main internal regulator output voltage
* @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
* @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
*/
__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void)
{
return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_VOS));
}
#if defined(PWR_CR5_R1MODE)
/**
* @brief Enable main regulator voltage range 1 boost mode
* @rmtoll CR5 R1MODE LL_PWR_EnableRange1BoostMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableRange1BoostMode(void)
{
CLEAR_BIT(PWR->CR5, PWR_CR5_R1MODE);
}
/**
* @brief Disable main regulator voltage range 1 boost mode
* @rmtoll CR5 R1MODE LL_PWR_DisableRange1BoostMode
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableRange1BoostMode(void)
{
SET_BIT(PWR->CR5, PWR_CR5_R1MODE);
}
/**
* @brief Check if the main regulator voltage range 1 boost mode is enabled
* @rmtoll CR5 R1MODE LL_PWR_IsEnabledRange1BoostMode
* @retval Inverted state of bit (0 or 1).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledRange1BoostMode(void)
{
return (READ_BIT(PWR->CR5, PWR_CR5_R1MODE) == RESET);
}
#endif /* PWR_CR5_R1MODE */
/**
* @brief Enable access to the backup domain
* @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
{
SET_BIT(PWR->CR1, PWR_CR1_DBP);
}
/**
* @brief Disable access to the backup domain
* @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
{
CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
}
/**
* @brief Check if the backup domain is enabled
* @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
{
return (READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP));
}
/**
* @brief Set Low-Power mode
* @rmtoll CR1 LPMS LL_PWR_SetPowerMode
* @param LowPowerMode This parameter can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP0
* @arg @ref LL_PWR_MODE_STOP1
* @arg @ref LL_PWR_MODE_STOP2
* @arg @ref LL_PWR_MODE_STANDBY
* @arg @ref LL_PWR_MODE_SHUTDOWN
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode)
{
MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode);
}
/**
* @brief Get Low-Power mode
* @rmtoll CR1 LPMS LL_PWR_GetPowerMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_MODE_STOP0
* @arg @ref LL_PWR_MODE_STOP1
* @arg @ref LL_PWR_MODE_STOP2
* @arg @ref LL_PWR_MODE_STANDBY
* @arg @ref LL_PWR_MODE_SHUTDOWN
*/
__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
{
return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS));
}
#if defined(PWR_CR1_RRSTP)
/**
* @brief Enable SRAM3 content retention in Stop mode
* @rmtoll CR1 RRSTP LL_PWR_EnableSRAM3Retention
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableSRAM3Retention(void)
{
SET_BIT(PWR->CR1, PWR_CR1_RRSTP);
}
/**
* @brief Disable SRAM3 content retention in Stop mode
* @rmtoll CR1 RRSTP LL_PWR_DisableSRAM3Retention
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableSRAM3Retention(void)
{
CLEAR_BIT(PWR->CR1, PWR_CR1_RRSTP);
}
/**
* @brief Check if SRAM3 content retention in Stop mode is enabled
* @rmtoll CR1 RRSTP LL_PWR_IsEnabledSRAM3Retention
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM3Retention(void)
{
return (READ_BIT(PWR->CR1, PWR_CR1_RRSTP) == (PWR_CR1_RRSTP));
}
#endif /* PWR_CR1_RRSTP */
#if defined(PWR_CR3_DSIPDEN)
/**
* @brief Enable pull-down activation on DSI pins
* @rmtoll CR3 DSIPDEN LL_PWR_EnableDSIPinsPDActivation
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableDSIPinsPDActivation(void)
{
SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN);
}
/**
* @brief Disable pull-down activation on DSI pins
* @rmtoll CR3 DSIPDEN LL_PWR_DisableDSIPinsPDActivation
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableDSIPinsPDActivation(void)
{
CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN);
}
/**
* @brief Check if pull-down activation on DSI pins is enabled
* @rmtoll CR3 DSIPDEN LL_PWR_IsEnabledDSIPinsPDActivation
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledDSIPinsPDActivation(void)
{
return (READ_BIT(PWR->CR3, PWR_CR3_DSIPDEN) == (PWR_CR3_DSIPDEN));
}
#endif /* PWR_CR3_DSIPDEN */
#if defined(PWR_CR2_PVME1)
/**
* @brief Enable VDDUSB supply
* @rmtoll CR2 USV LL_PWR_EnableVddUSB
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableVddUSB(void)
{
SET_BIT(PWR->CR2, PWR_CR2_USV);
}
/**
* @brief Disable VDDUSB supply
* @rmtoll CR2 USV LL_PWR_DisableVddUSB
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableVddUSB(void)
{
CLEAR_BIT(PWR->CR2, PWR_CR2_USV);
}
/**
* @brief Check if VDDUSB supply is enabled
* @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void)
{
return (READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV));
}
#endif
#if defined(PWR_CR2_IOSV)
/**
* @brief Enable VDDIO2 supply
* @rmtoll CR2 IOSV LL_PWR_EnableVddIO2
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableVddIO2(void)
{
SET_BIT(PWR->CR2, PWR_CR2_IOSV);
}
/**
* @brief Disable VDDIO2 supply
* @rmtoll CR2 IOSV LL_PWR_DisableVddIO2
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableVddIO2(void)
{
CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV);
}
/**
* @brief Check if VDDIO2 supply is enabled
* @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void)
{
return (READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV));
}
#endif
/**
* @brief Enable the Power Voltage Monitoring on a peripheral
* @rmtoll CR2 PVME1 LL_PWR_EnablePVM\n
* CR2 PVME2 LL_PWR_EnablePVM\n
* CR2 PVME3 LL_PWR_EnablePVM\n
* CR2 PVME4 LL_PWR_EnablePVM
* @param PeriphVoltage This parameter can be one of the following values:
* @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
* @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
* @arg @ref LL_PWR_PVM_VDDA_1_62V
* @arg @ref LL_PWR_PVM_VDDA_2_2V
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage)
{
SET_BIT(PWR->CR2, PeriphVoltage);
}
/**
* @brief Disable the Power Voltage Monitoring on a peripheral
* @rmtoll CR2 PVME1 LL_PWR_DisablePVM\n
* CR2 PVME2 LL_PWR_DisablePVM\n
* CR2 PVME3 LL_PWR_DisablePVM\n
* CR2 PVME4 LL_PWR_DisablePVM
* @param PeriphVoltage This parameter can be one of the following values:
* @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
* @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
* @arg @ref LL_PWR_PVM_VDDA_1_62V
* @arg @ref LL_PWR_PVM_VDDA_2_2V
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage)
{
CLEAR_BIT(PWR->CR2, PeriphVoltage);
}
/**
* @brief Check if Power Voltage Monitoring is enabled on a peripheral
* @rmtoll CR2 PVME1 LL_PWR_IsEnabledPVM\n
* CR2 PVME2 LL_PWR_IsEnabledPVM\n
* CR2 PVME3 LL_PWR_IsEnabledPVM\n
* CR2 PVME4 LL_PWR_IsEnabledPVM
* @param PeriphVoltage This parameter can be one of the following values:
* @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
* @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
* @arg @ref LL_PWR_PVM_VDDA_1_62V
* @arg @ref LL_PWR_PVM_VDDA_2_2V
*
* (*) value not defined in all devices
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage)
{
return (READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage));
}
/**
* @brief Configure the voltage threshold detected by the Power Voltage Detector
* @rmtoll CR2 PLS LL_PWR_SetPVDLevel
* @param PVDLevel This parameter can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
{
MODIFY_REG(PWR->CR2, PWR_CR2_PLS, PVDLevel);
}
/**
* @brief Get the voltage threshold detection
* @rmtoll CR2 PLS LL_PWR_GetPVDLevel
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_PVDLEVEL_0
* @arg @ref LL_PWR_PVDLEVEL_1
* @arg @ref LL_PWR_PVDLEVEL_2
* @arg @ref LL_PWR_PVDLEVEL_3
* @arg @ref LL_PWR_PVDLEVEL_4
* @arg @ref LL_PWR_PVDLEVEL_5
* @arg @ref LL_PWR_PVDLEVEL_6
* @arg @ref LL_PWR_PVDLEVEL_7
*/
__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
{
return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PLS));
}
/**
* @brief Enable Power Voltage Detector
* @rmtoll CR2 PVDE LL_PWR_EnablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnablePVD(void)
{
SET_BIT(PWR->CR2, PWR_CR2_PVDE);
}
/**
* @brief Disable Power Voltage Detector
* @rmtoll CR2 PVDE LL_PWR_DisablePVD
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisablePVD(void)
{
CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE);
}
/**
* @brief Check if Power Voltage Detector is enabled
* @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
{
return (READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE));
}
/**
* @brief Enable Internal Wake-up line
* @rmtoll CR3 EIWF LL_PWR_EnableInternWU
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableInternWU(void)
{
SET_BIT(PWR->CR3, PWR_CR3_EIWF);
}
/**
* @brief Disable Internal Wake-up line
* @rmtoll CR3 EIWF LL_PWR_DisableInternWU
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableInternWU(void)
{
CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF);
}
/**
* @brief Check if Internal Wake-up line is enabled
* @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void)
{
return (READ_BIT(PWR->CR3, PWR_CR3_EIWF) == (PWR_CR3_EIWF));
}
/**
* @brief Enable pull-up and pull-down configuration
* @rmtoll CR3 APC LL_PWR_EnablePUPDCfg
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void)
{
SET_BIT(PWR->CR3, PWR_CR3_APC);
}
/**
* @brief Disable pull-up and pull-down configuration
* @rmtoll CR3 APC LL_PWR_DisablePUPDCfg
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void)
{
CLEAR_BIT(PWR->CR3, PWR_CR3_APC);
}
/**
* @brief Check if pull-up and pull-down configuration is enabled
* @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void)
{
return (READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC));
}
#if defined(PWR_CR3_DSIPDEN)
/**
* @brief Enable pull-down activation on DSI pins
* @rmtoll CR3 DSIPDEN LL_PWR_EnableDSIPullDown
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableDSIPullDown(void)
{
SET_BIT(PWR->CR3, PWR_CR3_DSIPDEN);
}
/**
* @brief Disable pull-down activation on DSI pins
* @rmtoll CR3 DSIPDEN LL_PWR_DisableDSIPullDown
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableDSIPullDown(void)
{
CLEAR_BIT(PWR->CR3, PWR_CR3_DSIPDEN);
}
/**
* @brief Check if pull-down activation on DSI pins is enabled
* @rmtoll CR3 DSIPDEN LL_PWR_IsEnabledDSIPullDown
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledDSIPullDown(void)
{
return (READ_BIT(PWR->CR3, PWR_CR3_DSIPDEN) == (PWR_CR3_DSIPDEN));
}
#endif /* PWR_CR3_DSIPDEN */
/**
* @brief Enable SRAM2 content retention in Standby mode
* @rmtoll CR3 RRS LL_PWR_EnableSRAM2Retention
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableSRAM2Retention(void)
{
SET_BIT(PWR->CR3, PWR_CR3_RRS);
}
/**
* @brief Disable SRAM2 content retention in Standby mode
* @rmtoll CR3 RRS LL_PWR_DisableSRAM2Retention
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableSRAM2Retention(void)
{
CLEAR_BIT(PWR->CR3, PWR_CR3_RRS);
}
/**
* @brief Check if SRAM2 content retention in Standby mode is enabled
* @rmtoll CR3 RRS LL_PWR_IsEnabledSRAM2Retention
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM2Retention(void)
{
return (READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS));
}
/**
* @brief Enable the WakeUp PINx functionality
* @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n
* CR3 EWUP2 LL_PWR_EnableWakeUpPin\n
* CR3 EWUP3 LL_PWR_EnableWakeUpPin\n
* CR3 EWUP4 LL_PWR_EnableWakeUpPin\n
* CR3 EWUP5 LL_PWR_EnableWakeUpPin\n
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
{
SET_BIT(PWR->CR3, WakeUpPin);
}
/**
* @brief Disable the WakeUp PINx functionality
* @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n
* CR3 EWUP2 LL_PWR_DisableWakeUpPin\n
* CR3 EWUP3 LL_PWR_DisableWakeUpPin\n
* CR3 EWUP4 LL_PWR_DisableWakeUpPin\n
* CR3 EWUP5 LL_PWR_DisableWakeUpPin\n
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
{
CLEAR_BIT(PWR->CR3, WakeUpPin);
}
/**
* @brief Check if the WakeUp PINx functionality is enabled
* @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n
* CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n
* CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n
* CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n
* CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin\n
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
{
return (READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin));
}
/**
* @brief Set the resistor impedance
* @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor
* @param Resistor This parameter can be one of the following values:
* @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K
* @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor)
{
MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor);
}
/**
* @brief Get the resistor impedance
* @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor
* @retval Returned value can be one of the following values:
* @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K
* @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K
*/
__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void)
{
return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS));
}
/**
* @brief Enable battery charging
* @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void)
{
SET_BIT(PWR->CR4, PWR_CR4_VBE);
}
/**
* @brief Disable battery charging
* @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void)
{
CLEAR_BIT(PWR->CR4, PWR_CR4_VBE);
}
/**
* @brief Check if battery charging is enabled
* @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void)
{
return (READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE));
}
/**
* @brief Set the Wake-Up pin polarity low for the event detection
* @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n
* CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n
* CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n
* CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n
* CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin)
{
SET_BIT(PWR->CR4, WakeUpPin);
}
/**
* @brief Set the Wake-Up pin polarity high for the event detection
* @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n
* CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n
* CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n
* CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n
* CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval None
*/
__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin)
{
CLEAR_BIT(PWR->CR4, WakeUpPin);
}
/**
* @brief Get the Wake-Up pin polarity for the event detection
* @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n
* CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n
* CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n
* CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n
* CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow
* @param WakeUpPin This parameter can be one of the following values:
* @arg @ref LL_PWR_WAKEUP_PIN1
* @arg @ref LL_PWR_WAKEUP_PIN2
* @arg @ref LL_PWR_WAKEUP_PIN3
* @arg @ref LL_PWR_WAKEUP_PIN4
* @arg @ref LL_PWR_WAKEUP_PIN5
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin)
{
return (READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin));
}
/**
* @brief Enable GPIO pull-up state in Standby and Shutdown modes
* @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRF PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRG PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRH PU0-15 LL_PWR_EnableGPIOPullUp\n
* PUCRI PU0-11 LL_PWR_EnableGPIOPullUp
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
{
SET_BIT(*((uint32_t *)GPIO), GPIONumber);
}
/**
* @brief Disable GPIO pull-up state in Standby and Shutdown modes
* @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRF PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRG PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRH PU0-15 LL_PWR_DisableGPIOPullUp\n
* PUCRI PU0-11 LL_PWR_DisableGPIOPullUp
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
{
CLEAR_BIT(*((uint32_t *)GPIO), GPIONumber);
}
/**
* @brief Check if GPIO pull-up state is enabled
* @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRF PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRG PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRH PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
* PUCRI PU0-11 LL_PWR_IsEnabledGPIOPullUp
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
{
return (READ_BIT(*((uint32_t *)(GPIO)), GPIONumber) == (GPIONumber));
}
/**
* @brief Enable GPIO pull-down state in Standby and Shutdown modes
* @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRF PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRG PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRH PD0-15 LL_PWR_EnableGPIOPullDown\n
* PDCRI PD0-11 LL_PWR_EnableGPIOPullDown
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval None
*/
__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
{
register uint32_t temp = (uint32_t)(GPIO) + 4;
SET_BIT(*((uint32_t *)(temp)), GPIONumber);
}
/**
* @brief Disable GPIO pull-down state in Standby and Shutdown modes
* @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRF PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRG PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRH PD0-15 LL_PWR_DisableGPIOPullDown\n
* PDCRI PD0-11 LL_PWR_DisableGPIOPullDown
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval None
*/
__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
{
register uint32_t temp = (uint32_t)(GPIO) + 4;
CLEAR_BIT(*((uint32_t *)(temp)), GPIONumber);
}
/**
* @brief Check if GPIO pull-down state is enabled
* @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRF PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRG PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRH PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
* PDCRI PD0-11 LL_PWR_IsEnabledGPIOPullDown
* @param GPIO This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_A
* @arg @ref LL_PWR_GPIO_B
* @arg @ref LL_PWR_GPIO_C
* @arg @ref LL_PWR_GPIO_D
* @arg @ref LL_PWR_GPIO_E
* @arg @ref LL_PWR_GPIO_F (*)
* @arg @ref LL_PWR_GPIO_G (*)
* @arg @ref LL_PWR_GPIO_H
* @arg @ref LL_PWR_GPIO_I (*)
*
* (*) value not defined in all devices
* @param GPIONumber This parameter can be one of the following values:
* @arg @ref LL_PWR_GPIO_BIT_0
* @arg @ref LL_PWR_GPIO_BIT_1
* @arg @ref LL_PWR_GPIO_BIT_2
* @arg @ref LL_PWR_GPIO_BIT_3
* @arg @ref LL_PWR_GPIO_BIT_4
* @arg @ref LL_PWR_GPIO_BIT_5
* @arg @ref LL_PWR_GPIO_BIT_6
* @arg @ref LL_PWR_GPIO_BIT_7
* @arg @ref LL_PWR_GPIO_BIT_8
* @arg @ref LL_PWR_GPIO_BIT_9
* @arg @ref LL_PWR_GPIO_BIT_10
* @arg @ref LL_PWR_GPIO_BIT_11
* @arg @ref LL_PWR_GPIO_BIT_12
* @arg @ref LL_PWR_GPIO_BIT_13
* @arg @ref LL_PWR_GPIO_BIT_14
* @arg @ref LL_PWR_GPIO_BIT_15
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
{
register uint32_t temp = (uint32_t)(GPIO) + 4;
return (READ_BIT(*((uint32_t *)(temp)), GPIONumber) == (GPIONumber));
}
/**
* @}
*/
/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
* @{
*/
/**
* @brief Get Internal Wake-up line Flag
* @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI));
}
/**
* @brief Get Stand-By Flag
* @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF));
}
/**
* @brief Get Wake-up Flag 5
* @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5));
}
/**
* @brief Get Wake-up Flag 4
* @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4));
}
/**
* @brief Get Wake-up Flag 3
* @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3));
}
/**
* @brief Get Wake-up Flag 2
* @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2));
}
/**
* @brief Get Wake-up Flag 1
* @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void)
{
return (READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1));
}
/**
* @brief Clear Stand-By Flag
* @rmtoll SCR CSBF LL_PWR_ClearFlag_SB
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CSBF);
}
/**
* @brief Clear Wake-up Flags
* @rmtoll SCR CWUF LL_PWR_ClearFlag_WU
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF);
}
/**
* @brief Clear Wake-up Flag 5
* @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF5);
}
/**
* @brief Clear Wake-up Flag 4
* @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF4);
}
/**
* @brief Clear Wake-up Flag 3
* @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF3);
}
/**
* @brief Clear Wake-up Flag 2
* @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF2);
}
/**
* @brief Clear Wake-up Flag 1
* @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1
* @retval None
*/
__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void)
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF1);
}
/**
* @brief Indicate whether VDDA voltage is below or above PVM4 threshold
* @rmtoll SR2 PVMO4 LL_PWR_IsActiveFlag_PVMO4
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO4(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_PVMO4) == (PWR_SR2_PVMO4));
}
/**
* @brief Indicate whether VDDA voltage is below or above PVM3 threshold
* @rmtoll SR2 PVMO3 LL_PWR_IsActiveFlag_PVMO3
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO3(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_PVMO3) == (PWR_SR2_PVMO3));
}
#if defined(PWR_SR2_PVMO2)
/**
* @brief Indicate whether VDDIO2 voltage is below or above PVM2 threshold
* @rmtoll SR2 PVMO2 LL_PWR_IsActiveFlag_PVMO2
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO2(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_PVMO2) == (PWR_SR2_PVMO2));
}
#endif /* PWR_SR2_PVMO2 */
#if defined(PWR_SR2_PVMO1)
/**
* @brief Indicate whether VDDUSB voltage is below or above PVM1 threshold
* @rmtoll SR2 PVMO1 LL_PWR_IsActiveFlag_PVMO1
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO1(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_PVMO1) == (PWR_SR2_PVMO1));
}
#endif /* PWR_SR2_PVMO1 */
/**
* @brief Indicate whether VDD voltage is below or above the selected PVD threshold
* @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO));
}
/**
* @brief Indicate whether the regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level
* @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOS(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF));
}
/**
* @brief Indicate whether the regulator is ready in main mode or is in low-power mode
* @note Take care, return value "0" means the regulator is ready. Return value "1" means the output voltage range is still changing.
* @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF));
}
/**
* @brief Indicate whether or not the low-power regulator is ready
* @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void)
{
return (READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS));
}
/**
* @}
*/
#if defined(USE_FULL_LL_DRIVER)
/** @defgroup PWR_LL_EF_Init De-initialization function
* @{
*/
ErrorStatus LL_PWR_DeInit(void);
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/** @defgroup PWR_LL_EF_Legacy_Functions Legacy functions name
* @{
*/
/* Old functions name kept for legacy purpose, to be replaced by the */
/* current functions name. */
#define LL_PWR_IsActiveFlag_VOSF LL_PWR_IsActiveFlag_VOS
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(PWR) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L4xx_LL_PWR_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
