File content as of revision 171:3a7713b1edbc:

/* mbed Microcontroller Library
 *******************************************************************************
 * Copyright (c) 2018, STMicroelectronics
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 * 3. Neither the name of STMicroelectronics nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************
 */

#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H

#include "cmsis.h"
#include "PinNamesTypes.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    ALT0  = 0x100,
    ALT1  = 0x200,
    ALT2  = 0x300,
    ALT3  = 0x400
} ALTx;

typedef enum {
    PA_0  = 0x00, // On P1/P2 connectors
    PA_0_ALT0 = PA_0 | ALT0,
    PA_1  = 0x01, // On P1/P2 connectors
    PA_1_ALT0 = PA_1 | ALT0,
    PA_2  = 0x02, // On P1/P2 connectors
    PA_2_ALT0 = PA_2 | ALT0,
    PA_3  = 0x03, // On P1/P2 connectors
    PA_3_ALT0 = PA_3 | ALT0,
    PA_4  = 0x04,
    PA_4_ALT0 = PA_4 | ALT0,
    PA_5  = 0x05, // On P1/P2 connectors
    PA_5_ALT0 = PA_5 | ALT0,
    PA_6  = 0x06,
    PA_6_ALT0 = PA_6 | ALT0,
    PA_7  = 0x07,
    PA_7_ALT0 = PA_7 | ALT0,
    PA_7_ALT1 = PA_7 | ALT1,
    PA_7_ALT2 = PA_7 | ALT2,
    PA_8  = 0x08,
    PA_9  = 0x09,
    PA_10 = 0x0A,
    PA_11 = 0x0B,
    PA_12 = 0x0C,
    PA_13 = 0x0D,
    PA_14 = 0x0E,
    PA_15 = 0x0F,
    PA_15_ALT0 = PA_15 | ALT0,

    PB_0  = 0x10,
    PB_0_ALT0 = PB_0 | ALT0,
    PB_0_ALT1 = PB_0 | ALT1,
    PB_1  = 0x11,
    PB_1_ALT0 = PB_1 | ALT0,
    PB_1_ALT1 = PB_1 | ALT1,
    PB_2  = 0x12, // On P1/P2 connectors
    PB_3  = 0x13, // On P1/P2 connectors
    PB_3_ALT0 = PB_3 | ALT0,
    PB_4  = 0x14,
    PB_4_ALT0 = PB_4 | ALT0,
    PB_5  = 0x15,
    PB_5_ALT0 = PB_5 | ALT0,
    PB_6  = 0x16,
    PB_6_ALT0 = PB_6 | ALT0,
    PB_7  = 0x17,
    PB_7_ALT0 = PB_7 | ALT0,
    PB_8  = 0x18, // On P1/P2 connectors
    PB_8_ALT0 = PB_8 | ALT0,
    PB_9  = 0x19, // On P1/P2 connectors
    PB_9_ALT0 = PB_9 | ALT0,
    PB_10 = 0x1A,
    PB_11 = 0x1B,
    PB_12 = 0x1C,
    PB_13 = 0x1D,
    PB_13_ALT0 = PB_13 | ALT0,
    PB_14 = 0x1E,
    PB_14_ALT0 = PB_14 | ALT0,
    PB_14_ALT1 = PB_14 | ALT1,
    PB_15 = 0x1F,
    PB_15_ALT0 = PB_15 | ALT0,
    PB_15_ALT1 = PB_15 | ALT1,

    PC_0  = 0x20,
    PC_0_ALT0 = PC_0 | ALT0,
    PC_0_ALT1 = PC_0 | ALT1,
    PC_1  = 0x21,
    PC_1_ALT0 = PC_1 | ALT0,
    PC_1_ALT1 = PC_1 | ALT1,
    PC_2  = 0x22,
    PC_2_ALT0 = PC_2 | ALT0,
    PC_2_ALT1 = PC_2 | ALT1,
    PC_3  = 0x23,
    PC_3_ALT0 = PC_3 | ALT0,
    PC_3_ALT1 = PC_3 | ALT1,
    PC_4  = 0x24,
    PC_4_ALT0 = PC_4 | ALT0,
    PC_5  = 0x25,
    PC_5_ALT0 = PC_5 | ALT0,
    PC_6  = 0x26,
    PC_6_ALT0 = PC_6 | ALT0,
    PC_7  = 0x27,
    PC_7_ALT0 = PC_7 | ALT0,
    PC_8  = 0x28,
    PC_8_ALT0 = PC_8 | ALT0,
    PC_9  = 0x29,
    PC_9_ALT0 = PC_9 | ALT0,
    PC_10 = 0x2A,
    PC_10_ALT0 = PC_10 | ALT0,
    PC_11 = 0x2B,
    PC_11_ALT0 = PC_11 | ALT0,
    PC_12 = 0x2C,
    PC_13 = 0x2D,
    PC_14 = 0x2E, // On P1/P2 connectors
    PC_15 = 0x2F, // On P1/P2 connectors

    PD_0  = 0x30, // On P1/P2 connectors
    PD_1  = 0x31,
    PD_2  = 0x32,
    PD_3  = 0x33,
    PD_4  = 0x34,
    PD_5  = 0x35,
    PD_6  = 0x36,
    PD_7  = 0x37,
    PD_8  = 0x38,
    PD_9  = 0x39,
    PD_10 = 0x3A,
    PD_11 = 0x3B,
    PD_12 = 0x3C,
    PD_13 = 0x3D,
    PD_14 = 0x3E,
    PD_15 = 0x3F,

    PE_0  = 0x40,
    PE_1  = 0x41,
    PE_2  = 0x42,
    PE_3  = 0x43,
    PE_4  = 0x44,
    PE_5  = 0x45,
    PE_6  = 0x46,
    PE_7  = 0x47,
    PE_8  = 0x48, // On P1/P2 connectors
    PE_9  = 0x49,
    PE_10 = 0x4A, // On P1/P2 connectors
    PE_11 = 0x4B, // On P1/P2 connectors
    PE_12 = 0x4C, // On P1/P2 connectors
    PE_13 = 0x4D, // On P1/P2 connectors
    PE_14 = 0x4E, // On P1/P2 connectors
    PE_15 = 0x4F, // On P1/P2 connectors

    PH_0  = 0x70, // On P1/P2 connectors
    PH_1  = 0x71, // On P1/P2 connectors

    // ADC internal channels
    ADC_TEMP = 0xF0,
    ADC_VREF = 0xF1,
    ADC_VBAT = 0xF2,

    // STDIO for console print
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
#else
    STDIO_UART_TX = PD_5,
#endif
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
#else
    STDIO_UART_RX = PD_6,
#endif

    // Generic signals namings
    LED1 = PE_8, // LD5 Green
    LED2 = PB_2, // LD4 Red
    LED3 = LED1,
    LED4 = LED2,
    JOYSTICK_CENTER = PA_0,
    JOYSTICK_LEFT = PA_1,
    JOYSTICK_RIGHT = PA_2,
    JOYSTICK_UP = PA_3,
    JOYSTICK_DOWN = PA_5,
    USER_BUTTON = JOYSTICK_CENTER,
    // Standardized button names
    BUTTON1 = USER_BUTTON,
    BUTTON2 = JOYSTICK_LEFT,
    BUTTON3 = JOYSTICK_RIGHT,
    BUTTON4 = JOYSTICK_UP,
    BUTTON5 = JOYSTICK_DOWN,

    SERIAL_TX = STDIO_UART_TX,
    SERIAL_RX = STDIO_UART_RX,
    USBTX = STDIO_UART_TX,
    USBRX = STDIO_UART_RX,

    I2C_SCL     = PB_8,
    I2C_SDA     = PB_9,
    SPI_MOSI    = PA_7,
    SPI_MISO    = PA_6,
    SPI_SCK     = PA_5,
    SPI_CS      = PA_4,
    PWM_OUT     = PB_3,

    /**** USB pins ****/
    USB_OTG_FS_DM = PA_11,
    USB_OTG_FS_DP = PA_12,
    USB_OTG_FS_ID = PA_10,
    USB_OTG_FS_NOE = PC_9,
    USB_OTG_FS_NOE_ALT0 = PA_13,
    USB_OTG_FS_SOF = PA_8,
    USB_OTG_FS_VBUS = PA_9,

    /**** OSCILLATOR pins ****/
    RCC_OSC32_IN = PC_14,
    RCC_OSC32_OUT = PC_15,
    RCC_OSC_IN = PH_0,
    RCC_OSC_OUT = PH_1,

    /**** DEBUG pins ****/
    SYS_JTCK_SWCLK = PA_14,
    SYS_JTDI = PA_15,
    SYS_JTDO_SWO = PB_3,
    SYS_JTMS_SWDIO = PA_13,
    SYS_JTRST = PB_4,
    SYS_PVD_IN = PB_7,
    SYS_TRACECLK = PE_2,
    SYS_TRACED0 = PE_3,
    SYS_TRACED1 = PE_4,
    SYS_TRACED2 = PE_5,
    SYS_TRACED3 = PE_6,
    SYS_WKUP1 = PA_0,
    SYS_WKUP2 = PC_13,
    SYS_WKUP3 = PE_6,
    SYS_WKUP4 = PA_2,
    SYS_WKUP5 = PC_5,

    /**** QSPI pins ****/
    QSPI1_IO0 = PE_12,
    QSPI1_IO1 = PE_13,
    QSPI1_IO2 = PE_14,
    QSPI1_IO3 = PE_15,
    QSPI1_SCK = PE_10,
    QSPI1_CSN = PE_11,

    /**** QSPI FLASH pins ****/
    QSPI_FLASH1_IO0 = QSPI1_IO0,
    QSPI_FLASH1_IO1 = QSPI1_IO1,
    QSPI_FLASH1_IO2 = QSPI1_IO2,
    QSPI_FLASH1_IO3 = QSPI1_IO3,
    QSPI_FLASH1_SCK = QSPI1_SCK,
    QSPI_FLASH1_CSN = QSPI1_CSN,

    // Not connected
    NC = (int)0xFFFFFFFF
} PinName;

#ifdef __cplusplus
}
#endif

#endif