mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_NUCLEO_F303K8/stm32f3xx_hal_smbus.h
- Revision:
- 122:f9eeca106725
- Parent:
- 109:9296ab0bfc11
- Child:
- 123:b0220dba8be7
--- a/TARGET_NUCLEO_F303K8/stm32f3xx_hal_smbus.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_F303K8/stm32f3xx_hal_smbus.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f3xx_hal_smbus.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 12-Sept-2014
+ * @version V1.2.1
+ * @date 29-April-2015
* @brief Header file of SMBUS HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -59,8 +59,9 @@
* @{
*/
-/**
+/** @defgroup SMBUS_Configuration_Structure_definition SMBUS Configuration Structure definition
* @brief SMBUS Configuration Structure definition
+ * @{
*/
typedef struct
{
@@ -68,7 +69,7 @@
This parameter calculated by referring to SMBUS initialization
section in Reference manual */
uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
- This parameter can be a a value of @ref SMBUS_Analog_Filter */
+ This parameter can be a value of @ref SMBUS_Analog_Filter */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
This parameter can be a 7-bit or 10-bit address. */
@@ -98,49 +99,52 @@
This parameter can be a value of @ref SMBUS_peripheral_mode */
uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
- (Enable bits and different timeout values)
+ (Enable bits and different timeout values)
This parameter calculated by referring to SMBUS initialization
section in Reference manual */
} SMBUS_InitTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
- HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
- HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
- HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
- /* Aliases for inter STM32 series compatibility */
- HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
-}HAL_SMBUS_StateTypeDef;
+/**
+ * @}
+ */
-/**
- * @brief HAL SMBUS Error Code structure definition
- */
-typedef enum
-{
- HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
- HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
- HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
- HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
- HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
+/** @defgroup HAL_state_definition HAL state definition
+ * @brief HAL State definition
+ * @{
+ */
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+/**
+ * @}
+ */
-}HAL_SMBUS_ErrorTypeDef;
-
-/**
+/** @defgroup SMBUS_Error_Code_definition SMBUS Error Code definition
+ * @brief SMBUS Error Code definition
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_handle_Structure_definition SMBUS handle Structure definition
* @brief SMBUS handle Structure definition
+ * @{
*/
typedef struct
{
@@ -156,19 +160,22 @@
__IO uint32_t XferOptions; /*!< SMBUS transfer options */
- __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state */
HAL_LockTypeDef Lock; /*!< SMBUS locking object */
- __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+ __IO uint32_t State; /*!< SMBUS communication state */
- __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code */
}SMBUS_HandleTypeDef;
/**
* @}
*/
-
+
+/**
+ * @}
+ */
/* Exported constants --------------------------------------------------------*/
/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
@@ -178,11 +185,8 @@
/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
* @{
*/
-#define SMBUS_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
-#define SMBUS_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
-
-#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLED) || \
- ((FILTER) == SMBUS_ANALOGFILTER_DISABLED))
+#define SMBUS_ANALOGFILTER_ENABLE ((uint32_t)0x00000000)
+#define SMBUS_ANALOGFILTER_DISABLE I2C_CR1_ANFOFF
/**
* @}
*/
@@ -192,9 +196,6 @@
*/
#define SMBUS_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
#define SMBUS_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
-
-#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
- ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
/**
* @}
*/
@@ -203,11 +204,8 @@
* @{
*/
-#define SMBUS_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
-#define SMBUS_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
-
-#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLED) || \
- ((ADDRESS) == SMBUS_DUALADDRESS_ENABLED))
+#define SMBUS_DUALADDRESS_DISABLE ((uint32_t)0x00000000)
+#define SMBUS_DUALADDRESS_ENABLE I2C_OAR2_OA2EN
/**
* @}
*/
@@ -224,15 +222,6 @@
#define SMBUS_OA2_MASK05 ((uint8_t)0x05)
#define SMBUS_OA2_MASK06 ((uint8_t)0x06)
#define SMBUS_OA2_MASK07 ((uint8_t)0x07)
-
-#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
- ((MASK) == SMBUS_OA2_MASK01) || \
- ((MASK) == SMBUS_OA2_MASK02) || \
- ((MASK) == SMBUS_OA2_MASK03) || \
- ((MASK) == SMBUS_OA2_MASK04) || \
- ((MASK) == SMBUS_OA2_MASK05) || \
- ((MASK) == SMBUS_OA2_MASK06) || \
- ((MASK) == SMBUS_OA2_MASK07))
/**
* @}
*/
@@ -241,11 +230,8 @@
/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
* @{
*/
-#define SMBUS_GENERALCALL_DISABLED ((uint32_t)0x00000000)
-#define SMBUS_GENERALCALL_ENABLED I2C_CR1_GCEN
-
-#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLED) || \
- ((CALL) == SMBUS_GENERALCALL_ENABLED))
+#define SMBUS_GENERALCALL_DISABLE ((uint32_t)0x00000000)
+#define SMBUS_GENERALCALL_ENABLE I2C_CR1_GCEN
/**
* @}
*/
@@ -253,11 +239,8 @@
/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
* @{
*/
-#define SMBUS_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
-#define SMBUS_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
-
-#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLED) || \
- ((STRETCH) == SMBUS_NOSTRETCH_ENABLED))
+#define SMBUS_NOSTRETCH_DISABLE ((uint32_t)0x00000000)
+#define SMBUS_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
/**
* @}
*/
@@ -265,11 +248,8 @@
/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
* @{
*/
-#define SMBUS_PEC_DISABLED ((uint32_t)0x00000000)
-#define SMBUS_PEC_ENABLED I2C_CR1_PECEN
-
-#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLED) || \
- ((PEC) == SMBUS_PEC_ENABLED))
+#define SMBUS_PEC_DISABLE ((uint32_t)0x00000000)
+#define SMBUS_PEC_ENABLE I2C_CR1_PECEN
/**
* @}
*/
@@ -280,10 +260,6 @@
#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBHEN)
#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (uint32_t)(0x00000000)
#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBDEN)
-
-#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
/**
* @}
*/
@@ -296,15 +272,6 @@
#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
-
-#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
- ((MODE) == SMBUS_AUTOEND_MODE) || \
- ((MODE) == SMBUS_SOFTEND_MODE) || \
- ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
-
/**
* @}
*/
@@ -317,12 +284,6 @@
#define SMBUS_GENERATE_STOP I2C_CR2_STOP
#define SMBUS_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
#define SMBUS_GENERATE_START_WRITE I2C_CR2_START
-
-#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
- ((REQUEST) == SMBUS_GENERATE_START_READ) || \
- ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
- ((REQUEST) == SMBUS_NO_STARTSTOP))
-
/**
* @}
*/
@@ -337,14 +298,6 @@
#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
-
-#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
- ((REQUEST) == SMBUS_NEXT_FRAME) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
-
/**
* @}
*/
@@ -406,113 +359,214 @@
* @{
*/
-/** @brief Reset SMBUS handle state
- * @param __HANDLE__: SMBUS handle.
+/** @brief Reset SMBUS handle state.
+ * @param __HANDLE__ specifies the SMBUS Handle.
* @retval None
*/
#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
-/** @brief Enable or disable the specified SMBUS interrupts.
- * @param __HANDLE__: specifies the SMBUS Handle.
- * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+/** @brief Enable the specified SMBUS interrupts.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to enable.
* This parameter can be one of the following values:
- * @arg SMBUS_IT_ERRI: Errors interrupt enable
- * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
- * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
- * @arg SMBUS_IT_NACKI: NACK received interrupt enable
- * @arg SMBUS_IT_ADDRI: Address match interrupt enable
- * @arg SMBUS_IT_RXI: RX interrupt enable
- * @arg SMBUS_IT_TXI: TX interrupt enable
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
*
* @retval None
*/
-
#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief Disable the specified SMBUS interrupts.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __INTERRUPT__ specifies the interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
+ *
+ * @retval None
+ */
#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
-/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SMBUS Handle.
- * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+/** @brief Check whether the specified SMBUS interrupt source is enabled or not.
+ * @param __HANDLE__ specifies the SMBUS Handle.
* @param __INTERRUPT__: specifies the SMBUS interrupt source to check.
* This parameter can be one of the following values:
- * @arg SMBUS_IT_ERRI: Errors interrupt enable
- * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
- * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
- * @arg SMBUS_IT_NACKI: NACK received interrupt enable
- * @arg SMBUS_IT_ADDRI: Address match interrupt enable
- * @arg SMBUS_IT_RXI: RX interrupt enable
- * @arg SMBUS_IT_TXI: TX interrupt enable
+ * @arg @ref SMBUS_IT_ERRI Errors interrupt enable
+ * @arg @ref SMBUS_IT_TCI Transfer complete interrupt enable
+ * @arg @ref SMBUS_IT_STOPI STOP detection interrupt enable
+ * @arg @ref SMBUS_IT_NACKI NACK received interrupt enable
+ * @arg @ref SMBUS_IT_ADDRI Address match interrupt enable
+ * @arg @ref SMBUS_IT_RXI RX interrupt enable
+ * @arg @ref SMBUS_IT_TXI TX interrupt enable
*
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-/** @brief Checks whether the specified SMBUS flag is set or not.
- * @param __HANDLE__: specifies the SMBUS Handle.
- * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
- * @param __FLAG__: specifies the flag to check.
+/** @brief Check whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
- * @arg SMBUS_FLAG_TXE: Transmit data register empty
- * @arg SMBUS_FLAG_TXIS: Transmit interrupt status
- * @arg SMBUS_FLAG_RXNE: Receive data register not empty
- * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
- * @arg SMBUS_FLAG_AF: NACK received flag
- * @arg SMBUS_FLAG_STOPF: STOP detection flag
- * @arg SMBUS_FLAG_TC: Transfer complete (master mode)
- * @arg SMBUS_FLAG_TCR: Transfer complete reload
- * @arg SMBUS_FLAG_BERR: Bus error
- * @arg SMBUS_FLAG_ARLO: Arbitration lost
- * @arg SMBUS_FLAG_OVR: Overrun/Underrun
- * @arg SMBUS_FLAG_PECERR: PEC error in reception
- * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
- * @arg SMBUS_FLAG_ALERT: SMBus alert
- * @arg SMBUS_FLAG_BUSY: Bus busy
- * @arg SMBUS_FLAG_DIR: Transfer direction (slave mode)
+ * @arg @ref SMBUS_FLAG_TXE Transmit data register empty
+ * @arg @ref SMBUS_FLAG_TXIS Transmit interrupt status
+ * @arg @ref SMBUS_FLAG_RXNE Receive data register not empty
+ * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref SMBUS_FLAG_AF NACK received flag
+ * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
+ * @arg @ref SMBUS_FLAG_TC Transfer complete (master mode)
+ * @arg @ref SMBUS_FLAG_TCR Transfer complete reload
+ * @arg @ref SMBUS_FLAG_BERR Bus error
+ * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
+ * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
+ * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
+ * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref SMBUS_FLAG_ALERT SMBus alert
+ * @arg @ref SMBUS_FLAG_BUSY Bus busy
+ * @arg @ref SMBUS_FLAG_DIR Transfer direction (slave mode)
*
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define SMBUS_FLAG_MASK ((uint32_t)0x0001FFFF)
#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
-/** @brief Clears the SMBUS pending flags which are cleared by writing 1 in a specific bit.
- * @param __HANDLE__: specifies the SMBUS Handle.
- * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
- * @param __FLAG__: specifies the flag to clear.
+/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @param __FLAG__ specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
- * @arg SMBUS_FLAG_AF: NACK received flag
- * @arg SMBUS_FLAG_STOPF: STOP detection flag
- * @arg SMBUS_FLAG_BERR: Bus error
- * @arg SMBUS_FLAG_ARLO: Arbitration lost
- * @arg SMBUS_FLAG_OVR: Overrun/Underrun
- * @arg SMBUS_FLAG_PECERR: PEC error in reception
- * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
- * @arg SMBUS_FLAG_ALERT: SMBus alert
+ * @arg @ref SMBUS_FLAG_ADDR Address matched (slave mode)
+ * @arg @ref SMBUS_FLAG_AF NACK received flag
+ * @arg @ref SMBUS_FLAG_STOPF STOP detection flag
+ * @arg @ref SMBUS_FLAG_BERR Bus error
+ * @arg @ref SMBUS_FLAG_ARLO Arbitration lost
+ * @arg @ref SMBUS_FLAG_OVR Overrun/Underrun
+ * @arg @ref SMBUS_FLAG_PECERR PEC error in reception
+ * @arg @ref SMBUS_FLAG_TIMEOUT Timeout or Tlow detection flag
+ * @arg @ref SMBUS_FLAG_ALERT SMBus alert
*
* @retval None
*/
#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+/** @brief Enable the specified SMBUS peripheral.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
-#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
-#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+/** @brief Disable the specified SMBUS peripheral.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief Generate a Non-Acknowledge SMBUS peripheral in Slave mode.
+ * @param __HANDLE__ specifies the SMBUS Handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Macro SMBUS Private Macros
+ * @{
+ */
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
-#define __HAL_SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
-#define __HAL_SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLE) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLE))
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLE))
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \
+ ((PEC) == SMBUS_PEC_ENABLE))
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
-#define __HAL_SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
(uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
-#define __HAL_SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
-#define __HAL_SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
-#define __HAL_SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
-#define __HAL_SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
-#define __HAL_SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
-#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= I2C_CR2_NACK)
+#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
+#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
+#define SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+
+#define SMBUS_GET_ISR_REG(__HANDLE__) ((__HANDLE__)->Instance->ISR)
+#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup SMBUS_Private_Functions SMBUS Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32f3xx_hal_smbus.c file */
/**
* @}
*/
@@ -541,19 +595,10 @@
*/
/* IO operation functions *****************************************************/
-/** @addtogroup Blocking_mode_Polling Blocking mode Polling
- * @{
- */
/******* Blocking mode: Polling */
HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
-/**
- * @}
- */
-/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
- * @{
- */
- /******* Non-Blocking mode: Interrupt */
+/******* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
@@ -562,63 +607,31 @@
HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
-HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT(SMBUS_HandleTypeDef *hsmbus);
HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
-/** @defgroup Aliases_Exported_Functions Aliases for Exported Functions
- * @brief Aliases for new API and to insure inter STM32 series compatibility
- * @{
- */
-/* Aliases for new API and to insure inter STM32 series compatibility */
-#define HAL_SMBUS_EnableListen_IT HAL_SMBUS_Slave_Listen_IT
-/**
- * @}
- */
-/**
- * @}
- */
-
-/** @addtogroup IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
- /******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
-void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
-
-/** @addtogroup Aliases_Exported_Functions Aliases for Exported Functions
- * @brief Aliases for new API and to insure inter STM32 series compatibility
- * @{
- */
-/* Aliases for new API and to insure inter STM32 series compatibility */
-#define HAL_SMBUS_AddrCallback HAL_SMBUS_SlaveAddrCallback
-#define HAL_SMBUS_ListenCpltCallback HAL_SMBUS_SlaveListenCpltCallback
-/**
- * @}
- */
-
+void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_ListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
/**
* @}
*/
-/**
- * @}
- */
-
/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
* @{
*/
/* Peripheral State and Errors functions **************************************************/
-HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
/**
* @}
@@ -628,6 +641,12 @@
* @}
*/
+
+
+/**
+ * @}
+ */
+
/**
* @}
*/
