mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_NUCLEO_F303K8/stm32f3xx_hal_cec.h
- Revision:
- 122:f9eeca106725
- Parent:
- 109:9296ab0bfc11
- Child:
- 123:b0220dba8be7
--- a/TARGET_NUCLEO_F303K8/stm32f3xx_hal_cec.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_NUCLEO_F303K8/stm32f3xx_hal_cec.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f3xx_hal_cec.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 12-Sept-2014
+ * @version V1.2.1
+ * @date 29-April-2015
* @brief Header file of CEC HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -51,7 +51,7 @@
* @{
*/
-/** @addtogroup CEC
+/** @addtogroup CEC CEC
* @{
*/
@@ -59,6 +59,7 @@
/** @defgroup CEC_Exported_Types CEC Exported Types
* @{
*/
+
/**
* @brief CEC Init Structure definition
*/
@@ -71,52 +72,53 @@
else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
- it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
- or CEC_EXTENDED_TOLERANCE */
+ it can be a value of @ref CEC_Tolerance :
+ @arg CEC_STANDARD_TOLERANCE
+ @arg CEC_EXTENDED_TOLERANCE */
uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
- CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
- CEC_RX_STOP_ON_BRE: reception is stopped. */
+ @arg CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ @arg CEC_RX_STOP_ON_BRE: reception is stopped. */
uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
CEC line upon Bit Rising Error detection.
- CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
- CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+ @arg CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ @arg CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
- CEC line upon Long Bit Period Error detection.
- CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
- CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+ @arg CEC line upon Long Bit Period Error detection.
+ @arg CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ @arg CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
upon an error detected on a broadcast message.
It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
- 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
- a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ @arg 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ @arg __ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
- b) LBPE detection: error-bit generation on the CEC line
+ @arg __ b) LBPE detection: error-bit generation on the CEC line
if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
- 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ @arg 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
no error-bit generation in case neither a) nor b) are satisfied. Additionally,
there is no error-bit generation in case of Short Bit Period Error detection in
a broadcast message while LSTN bit is set. */
uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
- CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
- CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+ @arg CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ @arg CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
- CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ @arg CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
own address (OAR). Messages addressed to different destination are ignored.
Broadcast messages are always received.
- CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ @arg CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
address (OAR) with positive acknowledge. Messages addressed to different destination
are received, but without interfering with the CEC bus: no acknowledge sent. */
@@ -140,49 +142,30 @@
}HAL_CEC_StateTypeDef;
/**
- * @brief HAL Error structures definition
- */
-typedef enum
-{
- HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
- HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
- HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
- HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
- HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
- HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
- HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
- HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
- HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
- HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
-}
-HAL_CEC_ErrorTypeDef;
-
-/**
* @brief CEC handle Structure definition
*/
typedef struct
{
- CEC_TypeDef *Instance; /* CEC registers base address */
+ CEC_TypeDef *Instance; /*!< CEC registers base address */
- CEC_InitTypeDef Init; /* CEC communication parameters */
+ CEC_InitTypeDef Init; /*!< CEC communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */
- uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to CEC Rx transfer Buffer */
- uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+ uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */
- uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
in case error is reported */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_CEC_StateTypeDef State; /* CEC communication state */
+ HAL_CEC_StateTypeDef State; /*!< CEC communication state */
}CEC_HandleTypeDef;
-
/**
* @}
*/
@@ -192,139 +175,185 @@
* @{
*/
-/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+/** @defgroup CEC_Error_Code CEC Error Code
* @{
- */
-#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
-#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
-#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
-#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
-#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
-#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
-#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
-#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
-#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+ */
+#define HAL_CEC_ERROR_NONE (uint32_t) 0x0 /*!< No error */
+#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */
+#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */
+#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */
+#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */
+#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */
+#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */
+#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */
+#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
/**
* @}
*/
-/** @defgroup CEC_Tolerance Receiver Tolerance
+/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter
* @{
*/
-#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
-#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
-#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
- ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000) /*!< Transmission history-based signal free time (ruled by hardware) */
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001) /*!< 0.5 nominal data bit period */
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002) /*!< 1.5 nominal data bit periods */
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003) /*!< 2.5 nominal data bit periods */
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004) /*!< 3.5 nominal data bit periods */
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005) /*!< 4.5 nominal data bit periods */
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006) /*!< 5.5 nominal data bit periods */
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007) /*!< 6.5 nominal data bit periods */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000) /*!< Standard tolerance margin */
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) /*!< Extended Tolerance */
/**
* @}
*/
-/** @defgroup CEC_BRERxStop Reception Stop on Error
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
* @{
*/
-#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
-#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
-#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
- ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000) /*!< CEC reception not stopped by BRE detection */
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) /*!< CEC reception stopped by BRE detection */
/**
* @}
*/
-/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported
* @{
*/
-#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
-#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
-#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
- ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000) /*!< No Error-Bit on CEC line in case of BRE detection */
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) /*!< Error-Bit on CEC line in case of BRE detection */
/**
* @}
*/
-/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported
* @{
*/
-#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
-#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
-#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
- ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000) /*!< No Error-Bit on CEC line in case of LBPE detection */
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) /*!< Error-Bit on CEC line in case of LBPE detection */
/**
* @}
*/
-/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message
* @{
*/
-#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
-#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
-#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
- ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000) /*!< Error-Bit on CEC line for specific error conditions
+ on a broadcast message (cf Reference Manual) */
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) /*!< No Error-Bit on CEC line for specific error conditions
+ on a broadcast message (cf Reference Manual) */
/**
* @}
*/
-/** @defgroup CEC_SFT_Option Signal Free Time start option
+/** @defgroup CEC_SFT_Option CEC Signal Free Time start option
* @{
*/
-#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
-#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
-#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
- ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000) /*!< SFT timer starts when TXSOM is set by software */
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) /*!< SFT timer starts automatically at the end of message transmission/reception */
/**
* @}
*/
-/** @defgroup CEC_Listening_Mode Listening mode option
+/** @defgroup CEC_Listening_Mode CEC Listening mode option
* @{
*/
-#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
-#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
-#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
- ((MODE) == CEC_FULL_LISTENING_MODE))
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000) /*!< CEC peripheral receives only message addressed to its own address (OAR). */
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) /*!< CEC peripheral receives messages addressed to its own address (OAR) with
+ positive acknowledge. Messages addressed to different destination are
+ received, but without interfering with the CEC bus: no acknowledge sent. */
/**
* @}
*/
-/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register
* @{
*/
-#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
- CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16) /*!< CEC Device Own Address position in CEC CFGR register */
/**
* @}
*/
-
-/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+
+/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
* @{
*/
-#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4) /*!< CEC Initiator logical address position in message header */
/**
* @}
*/
-/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+/** @defgroup CEC_Interrupts_Definitions CEC interrupts definition
* @{
*/
-#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+#define CEC_IT_TXACKE CEC_IER_TXACKEIE /*!< Tx missing acknowledge error interruption */
+#define CEC_IT_TXERR CEC_IER_TXERRIE /*!< Tx error interruption */
+#define CEC_IT_TXUDR CEC_IER_TXUDRIE /*!< Tx underrun interruption */
+#define CEC_IT_TXEND CEC_IER_TXENDIE /*!< Tx end of message interruption */
+#define CEC_IT_TXBR CEC_IER_TXBRIE /*!< Tx byte request interruption */
+#define CEC_IT_ARBLST CEC_IER_ARBLSTIE /*!< Arbitration lost interruption */
+#define CEC_IT_RXACKE CEC_IER_RXACKEIE /*!< Rx missing acknowledge error interruption */
+#define CEC_IT_LBPE CEC_IER_LBPEIE /*!< Long bit period error interruption */
+#define CEC_IT_SBPE CEC_IER_SBPEIE /*!< Short bit period error interruption */
+#define CEC_IT_BRE CEC_IER_BREIE /*!< Bit rising error interruption */
+#define CEC_IT_RXOVR CEC_IER_RXOVRIE /*!< Rx overrun interruption */
+#define CEC_IT_RXEND CEC_IER_RXENDIE /*!< End of reception interruption */
+#define CEC_IT_RXBR CEC_IER_RXBRIE /*!< RX byte received interruption */
/**
* @}
- */
-
-/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ */
+
+/** @defgroup CEC_Flags_Definitions CEC flags definition
* @{
*/
-#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+#define CEC_FLAG_TXACKE CEC_ISR_TXACKE /*!< Tx missing acknowledge error flag */
+#define CEC_FLAG_TXERR CEC_ISR_TXERR /*!< Tx error flag */
+#define CEC_FLAG_TXUDR CEC_ISR_TXUDR /*!< Tx underrun flag */
+#define CEC_FLAG_TXEND CEC_ISR_TXEND /*!< Tx end of message flag */
+#define CEC_FLAG_TXBR CEC_ISR_TXBR /*!< Tx byte request flag */
+#define CEC_FLAG_ARBLST CEC_ISR_ARBLST /*!< Arbitration lost flag */
+#define CEC_FLAG_RXACKE CEC_ISR_RXACKE /*!< Rx missing acknowledge error flag */
+#define CEC_FLAG_LBPE CEC_ISR_LBPE /*!< Long bit period error flag */
+#define CEC_FLAG_SBPE CEC_ISR_SBPE /*!< Short bit period error flag */
+#define CEC_FLAG_BRE CEC_ISR_BRE /*!< Bit rising error flag */
+#define CEC_FLAG_RXOVR CEC_ISR_RXOVR /*!< Rx overrun flag */
+#define CEC_FLAG_RXEND CEC_ISR_RXEND /*!< End of reception flag */
+#define CEC_FLAG_RXBR CEC_ISR_RXBR /*!< RX byte received flag */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) /*!< All Rx or Tx errors flags concatenation */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) /*!< All Rx errors interruptions concatenation */
/**
* @}
*/
-/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
* @{
*/
-#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) /*!< All Tx errors interruptions concatenation */
/**
* @}
- */
+ */
/**
* @}
@@ -341,185 +370,163 @@
*/
#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
-/** @brief Checks whether or not the specified CEC interrupt flag is set.
+/** @brief Check whether or not the specified CEC interrupt flag is set.
* @param __HANDLE__: specifies the CEC Handle.
- * @param __INTERRUPT__: specifies the interrupt to check.
+ * @param __FLAG__: specifies the interrupt to check.
* This parameter can be one of the following values:
- * @arg CEC_ISR_RXBR : Rx-Byte Received
- * @arg CEC_ISR_RXEND : End of Reception
- * @arg CEC_ISR_RXOVR : Rx Overrun
- * @arg CEC_ISR_BRE : Rx Bit Rising Error
- * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
- * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
- * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
- * @arg CEC_ISR_ARBLST : Arbitration lost
- * @arg CEC_ISR_TXBR : Tx-Byte Request
- * @arg CEC_ISR_TXEND : End of Transmission
- * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
- * @arg CEC_ISR_TXERR : Tx Error
- * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
- * @retval ITStatus
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval IT Status
*/
-#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
-/** @brief Clears the interrupt or status flag when raised (write at 1)
+/** @brief Clear the interrupt or status flag when raised (write at 1)
* @param __HANDLE__: specifies the CEC Handle.
* @param __FLAG__: specifies the interrupt/status flag to clear.
* This parameter can be one of the following values:
- * @arg CEC_ISR_RXBR : Rx-Byte Received
- * @arg CEC_ISR_RXEND : End of Reception
- * @arg CEC_ISR_RXOVR : Rx Overrun
- * @arg CEC_ISR_BRE : Rx Bit Rising Error
- * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
- * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
- * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
- * @arg CEC_ISR_ARBLST : Arbitration lost
- * @arg CEC_ISR_TXBR : Tx-Byte Request
- * @arg CEC_ISR_TXEND : End of Transmission
- * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
- * @arg CEC_ISR_TXERR : Tx Error
- * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
* @retval none
*/
-#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__))
-/** @brief Enables the specified CEC interrupt.
+/** @brief Enable the specified CEC interrupt.
* @param __HANDLE__: specifies the CEC Handle.
* @param __INTERRUPT__: specifies the CEC interrupt to enable.
* This parameter can be one of the following values:
- * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
- * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
- * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
- * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
- * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
- * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
- * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
- * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
- * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
- * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
- * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
- * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
- * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
* @retval none
*/
#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
-/** @brief Disables the specified CEC interrupt.
+/** @brief Disable the specified CEC interrupt.
* @param __HANDLE__: specifies the CEC Handle.
* @param __INTERRUPT__: specifies the CEC interrupt to disable.
* This parameter can be one of the following values:
- * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
- * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
- * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
- * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
- * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
- * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
- * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
- * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
- * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
- * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
- * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
- * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
- * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
* @retval none
*/
#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
-/** @brief Checks whether or not the specified CEC interrupt is enabled.
+/** @brief Check whether or not the specified CEC interrupt is enabled.
* @param __HANDLE__: specifies the CEC Handle.
* @param __INTERRUPT__: specifies the CEC interrupt to check.
* This parameter can be one of the following values:
- * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
- * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
- * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
- * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
- * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
- * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
- * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
- * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
- * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
- * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
- * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
- * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
- * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
- * @retval FlagStatus
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval Flag Status
*/
#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
-/** @brief Enables the CEC device
+/** @brief Enable the CEC device.
* @param __HANDLE__: specifies the CEC Handle.
* @retval none
*/
#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
-/** @brief Disables the CEC device
+/** @brief Disable the CEC device.
* @param __HANDLE__: specifies the CEC Handle.
* @retval none
*/
#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
-/** @brief Set Transmission Start flag
+/** @brief Set Transmission Start flag.
* @param __HANDLE__: specifies the CEC Handle.
* @retval none
*/
#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
-/** @brief Set Transmission End flag
- * @param __HANDLE__: specifies the CEC Handle.
+/** @brief Set Transmission End flag.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @note If the CEC message consists of only one byte, TXEOM must be set before TXSOM.
* @retval none
- * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ *
*/
#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
-/** @brief Get Transmission Start flag
+/** @brief Get Transmission Start flag.
* @param __HANDLE__: specifies the CEC Handle.
* @retval FlagStatus
*/
#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
-/** @brief Get Transmission End flag
+/** @brief Get Transmission End flag.
* @param __HANDLE__: specifies the CEC Handle.
* @retval FlagStatus
*/
#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
-/** @brief Clear OAR register
+/** @brief Clear OAR register.
* @param __HANDLE__: specifies the CEC Handle.
* @retval none
*/
#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
-/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
- * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode).
* @param __HANDLE__: specifies the CEC Handle.
- * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @param __ADDRESS__: own address value (CEC logical address is identified by bit position)
+ * @note To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand.
* @retval none
*/
#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
-/** @brief Check CEC device Own Address Register (OAR) setting.
- * OAR address is written in a 15-bit field within CEC_CFGR register.
- * @param __ADDRESS__: CEC own address.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
-
-/** @brief Check CEC initiator or destination logical address setting.
- * Initiator and destination addresses are coded over 4 bits.
- * @param __ADDRESS__: CEC initiator or logical address.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
-
-/** @brief Check CEC message size.
- * The message size is the payload size: without counting the header,
- * it varies from 0 byte (ping operation, one header only, no payload) to
- * 15 bytes (1 opcode and up to 14 operands following the header).
- * @param __SIZE__: CEC message size.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
-
/**
* @}
*/
@@ -546,11 +553,12 @@
* @brief CEC Transmit/Receive functions
* @{
*/
-/* IO operation functions *****************************************************/
+/* I/O operation functions ***************************************************/
HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec);
void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
@@ -559,7 +567,7 @@
* @}
*/
-/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
+/** @addtogroup CEC_Exported_Functions_Group3 Peripheral Control functions
* @brief CEC control functions
* @{
*/
@@ -573,7 +581,61 @@
/**
* @}
*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+ * @{
+ */
+#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+ ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+ ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+ ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+/**
+ * @}
+ */
+
/**
* @}
*/
@@ -591,3 +653,4 @@
#endif /* __STM32F3xx_HAL_CEC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
