mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_DISCO_L476VG/stm32l4xx_hal_smartcard.h
- Revision:
- 122:f9eeca106725
- Parent:
- 107:4f6c30876dfa
--- a/TARGET_DISCO_L476VG/stm32l4xx_hal_smartcard.h Wed May 25 16:44:06 2016 +0100
+++ b/TARGET_DISCO_L476VG/stm32l4xx_hal_smartcard.h Thu Jul 07 14:34:11 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l4xx_hal_smartcard.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 26-June-2015
+ * @version V1.5.1
+ * @date 31-May-2016
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -71,8 +71,8 @@
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
- uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
- Only 1.5 stop bits are authorized in SmartCard mode. */
+ uint32_t StopBits; /*!< Specifies the number of stop bits.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
uint16_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref SMARTCARD_Parity
@@ -97,9 +97,9 @@
Selecting the single sample method increases the receiver tolerance to clock
deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
- uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. */
- uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
in case of parity error.
@@ -129,7 +129,7 @@
{
uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
advanced features may be initialized at the same time. This parameter
- can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+ can be a value of @ref SMARTCARDEx_Advanced_Features_Initialization_Type */
uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
This parameter can be a value of @ref SMARTCARD_Tx_Inv */
@@ -152,21 +152,70 @@
uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
This parameter can be a value of @ref SMARTCARD_MSB_First */
+
+ uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when
+ relevant flag is available) or once guard time period has elapsed.
+ This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */
}SMARTCARD_AdvFeatureInitTypeDef;
/**
- * @brief HAL State structures definition
+ * @brief HAL SMARTCARD State structures definition
+ * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
+ * - gState contains SMARTCARD state information related to global Handle management
+ * and also information related to Tx operations.
+ * gState value coding follow below described bitmap :
+ * b7-b6 Error information
+ * 00 : No Error
+ * 01 : (Not Used)
+ * 10 : Timeout
+ * 11 : Error
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
+ * b4-b3 (not used)
+ * xx : Should be set to 00
+ * b2 Intrinsic process state
+ * 0 : Ready
+ * 1 : Busy (IP busy with some configuration or internal operations)
+ * b1 (not used)
+ * x : Should be set to 0
+ * b0 Tx state
+ * 0 : Ready (no Tx operation ongoing)
+ * 1 : Busy (Tx operation ongoing)
+ * - RxState contains information related to Rx operations.
+ * RxState value coding follow below described bitmap :
+ * b7-b6 (not used)
+ * xx : Should be set to 00
+ * b5 IP initilisation status
+ * 0 : Reset (IP not initialized)
+ * 1 : Init done (IP not initialized)
+ * b4-b2 (not used)
+ * xxx : Should be set to 000
+ * b1 Rx state
+ * 0 : Ready (no Rx operation ongoing)
+ * 1 : Busy (Rx operation ongoing)
+ * b0 (not used)
+ * x : Should be set to 0.
*/
typedef enum
{
- HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
- HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+ HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
+ Value is allowed for gState and RxState */
+ HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
+ Value is allowed for RxState only */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
+ Not to be used for neither gState nor RxState.
+ Value is result of combination (Or) between gState and RxState values */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
+ Value is allowed for gState only */
+ HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
+ Value is allowed for gState only */
}HAL_SMARTCARD_StateTypeDef;
/**
@@ -212,7 +261,12 @@
HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
+ __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
+ and also related to Tx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+
+ __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
+ This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
uint32_t ErrorCode; /*!< SmartCard Error code */
@@ -243,7 +297,7 @@
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
* @{
*/
-#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */
/**
* @}
*/
@@ -251,7 +305,8 @@
/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
* @{
*/
-#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP)) /*!< SMARTCARD frame numer of stop bits */
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< SMARTCARD frame with 0.5 stop bit */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< SMARTCARD frame with 1.5 stop bits */
/**
* @}
*/
@@ -330,21 +385,6 @@
* @}
*/
-/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
- * @{
- */
-#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) /*!< No advanced feature initialization */
-#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) /*!< TX pin active level inversion */
-#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) /*!< RX pin active level inversion */
-#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) /*!< Binary data inversion */
-#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) /*!< TX/RX pins swap */
-#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) /*!< RX overrun disable */
-#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) /*!< DMA disable on Reception Error */
-#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) /*!< Most significant bit sent/received first */
-/**
- * @}
- */
-
/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
* @{
*/
@@ -417,72 +457,6 @@
* @}
*/
-/** @defgroup SmartCard_Flags SMARTCARD Flags
- * Elements values convention: 0xXXXX
- * - 0xXXXX : Flag mask in the ISR register
- * @{
- */
-#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */
-#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */
-#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */
-#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */
-#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */
-#define SMARTCARD_FLAG_TXE USART_ISR_TXE /*!< SMARTCARD transmit data register empty */
-#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */
-#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /*!< SMARTCARD read data register not empty */
-#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */
-#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */
-#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */
-#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */
-#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
- * @{
- */
-
-#define SMARTCARD_IT_PE ((uint16_t)0x0028) /*!< SMARTCARD parity error interruption */
-#define SMARTCARD_IT_TXE ((uint16_t)0x0727) /*!< SMARTCARD transmit data register empty interruption */
-#define SMARTCARD_IT_TC ((uint16_t)0x0626) /*!< SMARTCARD transmission complete interruption */
-#define SMARTCARD_IT_RXNE ((uint16_t)0x0525) /*!< SMARTCARD read data register not empty interruption */
-#define SMARTCARD_IT_IDLE ((uint16_t)0x0424) /*!< SMARTCARD idle line detection interruption */
-
-#define SMARTCARD_IT_ERR ((uint16_t)0x0060) /*!< SMARTCARD error interruption */
-#define SMARTCARD_IT_ORE ((uint16_t)0x0300) /*!< SMARTCARD overrun error interruption */
-#define SMARTCARD_IT_NE ((uint16_t)0x0200) /*!< SMARTCARD noise error interruption */
-#define SMARTCARD_IT_FE ((uint16_t)0x0100) /*!< SMARTCARD frame error interruption */
-
-#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B) /*!< SMARTCARD end of block interruption */
-#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A) /*!< SMARTCARD receiver timeout interruption */
-/**
- * @}
- */
-
-
-/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
- * @{
- */
-#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
-#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
-#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
-#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
-#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< Idle line detected clear flag */
-#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
-#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
-/**
- * @}
- */
-
/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
* @{
*/
@@ -524,11 +498,14 @@
* @{
*/
-/** @brief Reset SMARTCARD handle state.
+/** @brief Reset SMARTCARD handle states.
* @param __HANDLE__: SMARTCARD handle.
* @retval None
*/
-#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
+ (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
+ } while(0)
/** @brief Flush the Smartcard Data registers.
* @param __HANDLE__: specifies the SMARTCARD Handle.
@@ -544,14 +521,17 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __FLAG__: specifies the flag to check.
* This parameter can be any combination of the following values:
- * @arg SMARTCARD_CLEAR_PEF: Parity error clear flag
- * @arg SMARTCARD_CLEAR_FEF: Framing error clear flag
- * @arg SMARTCARD_CLEAR_NEF: Noise detected clear flag
- * @arg SMARTCARD_CLEAR_OREF: OverRun error clear flag
- * @arg SMARTCARD_CLEAR_IDLEF: Idle line detected clear flag
- * @arg SMARTCARD_CLEAR_TCF: Transmission complete clear flag
- * @arg SMARTCARD_CLEAR_RTOF: Receiver timeout clear flag
- * @arg SMARTCARD_CLEAR_EOBF: End of block clear flag
+ * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
+ * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
+ * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
+ * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available)
+ @endif
+ * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
+ * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
@@ -591,19 +571,22 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
- * @arg SMARTCARD_FLAG_REACK: Receive enable acknowledge flag
- * @arg SMARTCARD_FLAG_TEACK: Transmit enable acknowledge flag
- * @arg SMARTCARD_FLAG_BUSY: Busy flag
- * @arg SMARTCARD_FLAG_EOBF: End of block flag
- * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
- * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
- * @arg SMARTCARD_FLAG_TC: Transmission complete flag
- * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
- * @arg SMARTCARD_FLAG_IDLE: Idle line detection flag
- * @arg SMARTCARD_FLAG_ORE: Overrun error flag
- * @arg SMARTCARD_FLAG_NE: Noise error flag
- * @arg SMARTCARD_FLAG_FE: Framing error flag
- * @arg SMARTCARD_FLAG_PE: Parity error flag
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_FLAG_TCBGT Transmission complete before guard time flag (when flag available)
+ @endif
+ * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
+ * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
+ * @arg @ref SMARTCARD_FLAG_BUSY Busy flag
+ * @arg @ref SMARTCARD_FLAG_EOBF End of block flag
+ * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
+ * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
+ * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
+ * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
+ * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
+ * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
+ * @arg @ref SMARTCARD_FLAG_NE Noise error flag
+ * @arg @ref SMARTCARD_FLAG_FE Framing error flag
+ * @arg @ref SMARTCARD_FLAG_PE Parity error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
@@ -613,14 +596,17 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
* This parameter can be one of the following values:
- * @arg SMARTCARD_IT_EOB: End of block interrupt
- * @arg SMARTCARD_IT_RTO: Receive timeout interrupt
- * @arg SMARTCARD_IT_TXE: Transmit data register empty interrupt
- * @arg SMARTCARD_IT_TC: Transmission complete interrupt
- * @arg SMARTCARD_IT_RXNE: Receive data register not empty interrupt
- * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
- * @arg SMARTCARD_IT_PE: Parity error interrupt
- * @arg SMARTCARD_IT_ERR: Error interrupt(frame error, noise error, overrun error)
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ @endif
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
@@ -631,14 +617,17 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
* This parameter can be one of the following values:
- * @arg SMARTCARD_IT_EOB: End of block interrupt
- * @arg SMARTCARD_IT_RTO: Receive timeout interrupt
- * @arg SMARTCARD_IT_TXE: Transmit data register empty interrupt
- * @arg SMARTCARD_IT_TC: Transmission complete interrupt
- * @arg SMARTCARD_IT_RXNE: Receive data register not empty interrupt
- * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
- * @arg SMARTCARD_IT_PE: Parity error interrupt
- * @arg SMARTCARD_IT_ERR: Error interrupt(frame error, noise error, overrun error)
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ @endif
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
+ * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
@@ -650,16 +639,19 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __IT__: specifies the SMARTCARD interrupt to check.
* This parameter can be one of the following values:
- * @arg SMARTCARD_IT_EOB: End of block interrupt
- * @arg SMARTCARD_IT_RTO: Receive timeout interrupt
- * @arg SMARTCARD_IT_TXE: Transmit data register empty interrupt
- * @arg SMARTCARD_IT_TC: Transmission complete interrupt
- * @arg SMARTCARD_IT_RXNE: Receive data register not empty interrupt
- * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
- * @arg SMARTCARD_IT_ORE: Overrun error interrupt
- * @arg SMARTCARD_IT_NE: Noise error interrupt
- * @arg SMARTCARD_IT_FE: Framing error interrupt
- * @arg SMARTCARD_IT_PE: Parity error interrupt
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ @endif
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_ORE Overrun error interrupt
+ * @arg @ref SMARTCARD_IT_NE Noise error interrupt
+ * @arg @ref SMARTCARD_IT_FE Framing error interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
@@ -668,15 +660,17 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __IT__: specifies the SMARTCARD interrupt source to check.
* This parameter can be one of the following values:
- * @arg SMARTCARD_IT_EOB: End of block interrupt
- * @arg SMARTCARD_IT_RTO: Receive timeout interrupt
- * @arg SMARTCARD_IT_TXE: Transmit data register empty interrupt
- * @arg SMARTCARD_IT_TC: Transmission complete interrupt
- * @arg SMARTCARD_IT_RXNE: Receive data register not empty interrupt
- * @arg SMARTCARD_IT_ORE: Overrun error interrupt
- * @arg SMARTCARD_IT_NE: Noise error interrupt
- * @arg SMARTCARD_IT_FE: Framing error interrupt
- * @arg SMARTCARD_IT_PE: Parity error interrupt
+ * @arg @ref SMARTCARD_IT_EOB End of block interrupt
+ * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
+ * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
+ * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ @endif
+ * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
+ * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
+ * @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt
+ * @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
@@ -687,15 +681,19 @@
/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
- * to clear the corresponding interrupt
+ * to clear the corresponding interrupt.
* This parameter can be one of the following values:
- * @arg SMARTCARD_CLEAR_PEF: Parity error clear flag
- * @arg SMARTCARD_CLEAR_FEF: Framing error clear flag
- * @arg SMARTCARD_CLEAR_NEF: Noise detected clear flag
- * @arg SMARTCARD_CLEAR_OREF: OverRun error clear flag
- * @arg SMARTCARD_CLEAR_TCF: Transmission complete clear flag
- * @arg SMARTCARD_CLEAR_RTOF: Receiver timeout clear flag
- * @arg SMARTCARD_CLEAR_EOBF: End of block clear flag
+ * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
+ * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
+ * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
+ * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
+ * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
+ * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
+ @if STM32L443xx
+ * @arg @ref SMARTCARD_CLEAR_TCBGTF Transmission complete before guard time clear flag (when flag available)
+ @endif
+ * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
+ * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
@@ -704,8 +702,8 @@
* @param __HANDLE__: specifies the SMARTCARD Handle.
* @param __REQ__: specifies the request flag to set
* This parameter can be one of the following values:
- * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive data flush Request
- * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
+ * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
*
* @retval None
*/
@@ -744,78 +742,6 @@
* @{
*/
-/** @brief Report the SMARTCARD clock source.
- * @param __HANDLE__: specifies the SMARTCARD Handle.
- * @param __CLOCKSOURCE__: output variable.
- * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
- */
-#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK2: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- switch(__HAL_RCC_GET_USART3_SOURCE()) \
- { \
- case RCC_USART3CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART3CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART3CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART3CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- } while(0)
-
/** @brief Check the Baud rate range.
* @note The maximum Baud Rate is derived from the maximum clock on L4 (80 MHz)
* divided by the oversampling used on the SMARTCARD (i.e. 16).
@@ -857,7 +783,8 @@
* @param __STOPBITS__: SMARTCARD frame number of stop bits.
* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
*/
-#define IS_SMARTCARD_STOPBITS(__STOPBITS__) ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)
+#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\
+ ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
/**
* @brief Ensure that SMARTCARD frame parity is valid.
