mbed official / mbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Diff: TARGET_NUCLEO_F446ZE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_mmc.h

Revision:
163:e59c8e839560
Parent:
145:64910690c574
--- a/TARGET_NUCLEO_F446ZE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_mmc.h	Mon Mar 19 15:30:13 2018 +0000
+++ b/TARGET_NUCLEO_F446ZE/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_mmc.h	Tue Mar 20 13:30:58 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_mmc.h
   * @author  MCD Application Team
-  * @version V1.7.1
-  * @date    14-April-2017
   * @brief   Header file of MMC HAL module.
   ******************************************************************************
   * @attention
@@ -393,8 +391,8 @@
  
 /**
   * @brief  Enable the MMC device interrupt.
-  * @param  __HANDLE__: MMC Handle  
-  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
+  * @param  __HANDLE__ MMC Handle  
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
   *         This parameter can be one or a combination of the following values:
   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
@@ -424,8 +422,8 @@
 
 /**
   * @brief  Disable the MMC device interrupt.
-  * @param  __HANDLE__: MMC Handle   
-  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
+  * @param  __HANDLE__ MMC Handle   
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
   *          This parameter can be one or a combination of the following values:
   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
@@ -455,8 +453,8 @@
 
 /**
   * @brief  Check whether the specified MMC flag is set or not. 
-  * @param  __HANDLE__: MMC Handle   
-  * @param  __FLAG__: specifies the flag to check. 
+  * @param  __HANDLE__ MMC Handle   
+  * @param  __FLAG__ specifies the flag to check. 
   *          This parameter can be one of the following values:
   *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
   *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
@@ -486,8 +484,8 @@
 
 /**
   * @brief  Clear the MMC's pending flags.
-  * @param  __HANDLE__: MMC Handle  
-  * @param  __FLAG__: specifies the flag to clear.  
+  * @param  __HANDLE__ MMC Handle  
+  * @param  __FLAG__ specifies the flag to clear.  
   *          This parameter can be one or a combination of the following values:
   *            @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
   *            @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
@@ -506,8 +504,8 @@
 
 /**
   * @brief  Check whether the specified MMC interrupt has occurred or not.
-  * @param  __HANDLE__: MMC Handle   
-  * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check. 
+  * @param  __HANDLE__ MMC Handle   
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt source to check. 
   *          This parameter can be one of the following values:
   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
@@ -537,8 +535,8 @@
 
 /**
   * @brief  Clear the MMC's interrupt pending bits.
-  * @param  __HANDLE__: MMC Handle
-  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. 
+  * @param  __HANDLE__ MMC Handle
+  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear. 
   *          This parameter can be one or a combination of the following values:
   *            @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
   *            @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt