Diff: TARGET_NUCLEO_F413ZH/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_cryp.h

Revision:

163:e59c8e839560

Parent:

160:5571c4ff569f

--- a/TARGET_NUCLEO_F413ZH/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_cryp.h	Mon Mar 19 15:30:13 2018 +0000
+++ b/TARGET_NUCLEO_F413ZH/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_cryp.h	Tue Mar 20 13:30:58 2018 +0000
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cryp.h
   * @author  MCD Application Team
-  * @version V1.7.1
-  * @date    14-April-2017
   * @brief   Header file of CRYP HAL module.
   ******************************************************************************
   * @attention
@@ -260,14 +258,14 @@
   */
   
 /** @brief Reset CRYP handle state
-  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __HANDLE__ specifies the CRYP handle.
   * @retval None
   */
 #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
 
 /**
   * @brief  Enable/Disable the CRYP peripheral.
-  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __HANDLE__ specifies the CRYP handle.
   * @retval None
   */
 #define __HAL_CRYP_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  CRYP_CR_CRYPEN)
@@ -275,22 +273,22 @@
 
 /**
   * @brief  Flush the data FIFO.
-  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __HANDLE__ specifies the CRYP handle.
   * @retval None
   */
 #define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |=  CRYP_CR_FFLUSH)
 
 /**
   * @brief  Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
-  * @param  __HANDLE__: specifies the CRYP handle.
-  * @param  MODE: The algorithm mode.
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @param  MODE The algorithm mode.
   * @retval None
   */
 #define __HAL_CRYP_SET_MODE(__HANDLE__, MODE)  ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))
 
 /** @brief  Check whether the specified CRYP flag is set or not.
-  * @param  __HANDLE__: specifies the CRYP handle.
-  * @param  __FLAG__: specifies the flag to check.
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @param  __FLAG__ specifies the flag to check.
   *         This parameter can be one of the following values:
   *            @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data 
   *                                 or a key preparation (for AES decryption). 
@@ -307,8 +305,8 @@
                                                  ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
 
 /** @brief  Check whether the specified CRYP interrupt is set or not.
-  * @param  __HANDLE__: specifies the CRYP handle.
-  * @param  __INTERRUPT__: specifies the interrupt to check.
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @param  __INTERRUPT__ specifies the interrupt to check.
   *         This parameter can be one of the following values:
   *            @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
   *            @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
@@ -318,16 +316,16 @@
 
 /**
   * @brief  Enable the CRYP interrupt.
-  * @param  __HANDLE__: specifies the CRYP handle.
-  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @param  __INTERRUPT__ CRYP Interrupt.
   * @retval None
   */
 #define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
 
 /**
   * @brief  Disable the CRYP interrupt.
-  * @param  __HANDLE__: specifies the CRYP handle.
-  * @param  __INTERRUPT__: CRYP interrupt.
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @param  __INTERRUPT__ CRYP interrupt.
   * @retval None
   */
 #define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
@@ -821,7 +819,7 @@
   */
 
 /** @brief Reset CRYP handle state.
-  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __HANDLE__ specifies the CRYP handle.
   * @retval None
   */
 #define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
@@ -840,7 +838,7 @@
 
 /**
   * @brief  Set the algorithm operating mode.
-  * @param  __OPERATING_MODE__: specifies the operating mode
+  * @param  __OPERATING_MODE__ specifies the operating mode
   *          This parameter can be one of the following values:
   *            @arg @ref CRYP_ALGOMODE_ENCRYPT encryption     
   *            @arg @ref CRYP_ALGOMODE_KEYDERIVATION key derivation        
@@ -853,7 +851,7 @@
 
 /**
   * @brief  Set the algorithm chaining mode.
-  * @param  __CHAINING_MODE__: specifies the chaining mode
+  * @param  __CHAINING_MODE__ specifies the chaining mode
   *          This parameter can be one of the following values:
   *            @arg @ref CRYP_CHAINMODE_AES_ECB Electronic CodeBook     
   *            @arg @ref CRYP_CHAINMODE_AES_CBC Cipher Block Chaining        
@@ -867,7 +865,7 @@
 
 
 /** @brief  Check whether the specified CRYP status flag is set or not.
-  * @param  __FLAG__: specifies the flag to check.
+  * @param  __FLAG__ specifies the flag to check.
   *         This parameter can be one of the following values:
   *            @arg @ref CRYP_FLAG_BUSY GCM process suspension forbidden  
   *            @arg @ref CRYP_IT_WRERR Write Error 
@@ -879,7 +877,7 @@
 
 
 /** @brief  Clear the CRYP pending status flag.
-  * @param  __FLAG__: specifies the flag to clear.
+  * @param  __FLAG__ specifies the flag to clear.
   *         This parameter can be one of the following values:
   *            @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear
   *            @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear  
@@ -890,7 +888,7 @@
 
 
 /** @brief  Check whether the specified CRYP interrupt source is enabled or not.
-  * @param __INTERRUPT__: CRYP interrupt source to check
+  * @param __INTERRUPT__ CRYP interrupt source to check
   *         This parameter can be one of the following values:
   *            @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
   *            @arg @ref CRYP_IT_CCFIE Computation Complete interrupt  
@@ -900,7 +898,7 @@
 
 
 /** @brief  Check whether the specified CRYP interrupt is set or not.
-  * @param  __INTERRUPT__: specifies the interrupt to check.
+  * @param  __INTERRUPT__ specifies the interrupt to check.
   *         This parameter can be one of the following values:
   *            @arg @ref CRYP_IT_WRERR Write Error 
   *            @arg @ref CRYP_IT_RDERR Read Error 
@@ -912,7 +910,7 @@
 
 
 /** @brief  Clear the CRYP pending interrupt.
-  * @param  __INTERRUPT__: specifies the IT to clear.
+  * @param  __INTERRUPT__ specifies the IT to clear.
   *         This parameter can be one of the following values:
   *            @arg @ref CRYP_ERR_CLEAR Read (RDERR) or Write Error (WRERR) Flag Clear
   *            @arg @ref CRYP_CCF_CLEAR Computation Complete Flag (CCF) Clear    
@@ -923,7 +921,7 @@
 
 /**
   * @brief  Enable the CRYP interrupt.  
-  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @param  __INTERRUPT__ CRYP Interrupt.
   *         This parameter can be one of the following values:  
   *            @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
   *            @arg @ref CRYP_IT_CCFIE Computation Complete interrupt    
@@ -934,7 +932,7 @@
 
 /**
   * @brief  Disable the CRYP interrupt.
-  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @param  __INTERRUPT__ CRYP Interrupt.
   *         This parameter can be one of the following values:  
   *            @arg @ref CRYP_IT_ERRIE Error interrupt (used for RDERR and WRERR)
   *            @arg @ref CRYP_IT_CCFIE Computation Complete interrupt    
@@ -953,7 +951,7 @@
 
 /**
   * @brief Verify the key size length.
-  * @param __KEYSIZE__: Ciphering/deciphering algorithm key size. 
+  * @param __KEYSIZE__ Ciphering/deciphering algorithm key size. 
   * @retval SET (__KEYSIZE__ is a valid value) or RESET (__KEYSIZE__ is invalid)
   */  
 #define IS_CRYP_KEYSIZE(__KEYSIZE__)  (((__KEYSIZE__) == CRYP_KEYSIZE_128B)  || \
@@ -961,7 +959,7 @@
 
 /**
   * @brief Verify the input data type.
-  * @param __DATATYPE__: Ciphering/deciphering algorithm input data type.
+  * @param __DATATYPE__ Ciphering/deciphering algorithm input data type.
   * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)
   */  
 #define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
@@ -971,7 +969,7 @@
 
 /**
   * @brief Verify the CRYP AES IP running mode.
-  * @param __MODE__: CRYP AES IP running mode.
+  * @param __MODE__ CRYP AES IP running mode.
   * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
   */                                     
 #define IS_CRYP_AES(__MODE__) (((__MODE__) == CRYP_AES_DISABLE) || \
@@ -979,7 +977,7 @@
 
 /**
   * @brief Verify the selected CRYP algorithm.
-  * @param __ALGOMODE__: Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter).
+  * @param __ALGOMODE__ Selected CRYP algorithm (ciphering, deciphering, key derivation or a combination of the latter).
   * @retval SET (__ALGOMODE__ is valid) or RESET (__ALGOMODE__ is invalid)
   */                            
 #define IS_CRYP_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == CRYP_ALGOMODE_ENCRYPT)        || \
@@ -990,7 +988,7 @@
 
 /**
   * @brief Verify the selected CRYP chaining algorithm.
-  * @param __CHAINMODE__: Selected CRYP chaining algorithm.
+  * @param __CHAINMODE__ Selected CRYP chaining algorithm.
   * @retval SET (__CHAINMODE__ is valid) or RESET (__CHAINMODE__ is invalid)
   */   
 #if defined(AES_CR_NPBLB)
@@ -1009,7 +1007,7 @@
 
 /**
   * @brief Verify the deciphering key write option.
-  * @param __WRITE__: deciphering key write option.
+  * @param __WRITE__ deciphering key write option.
   * @retval SET (__WRITE__ is valid) or RESET (__WRITE__ is invalid)
   */                                   
 #define IS_CRYP_WRITE(__WRITE__)   (((__WRITE__) == CRYP_KEY_WRITE_ENABLE)      || \
@@ -1017,7 +1015,7 @@
 
 /**
   * @brief Verify the CRYP input data DMA mode.
-  * @param __MODE__: CRYP input data DMA mode.
+  * @param __MODE__ CRYP input data DMA mode.
   * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
   */  
 #define IS_CRYP_DMAIN(__MODE__) (((__MODE__) == CRYP_DMAIN_DISABLE) || \
@@ -1025,7 +1023,7 @@
 
 /**
   * @brief Verify the CRYP output data DMA mode.
-  * @param __MODE__: CRYP output data DMA mode.
+  * @param __MODE__ CRYP output data DMA mode.
   * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
   */                             
 #define IS_CRYP_DMAOUT(__MODE__) (((__MODE__) == CRYP_DMAOUT_DISABLE) || \
@@ -1033,7 +1031,7 @@
 
 /**
   * @brief Verify the CRYP AES ciphering/deciphering/authentication algorithm phase.
-  * @param __PHASE__: CRYP AES ciphering/deciphering/authentication algorithm phase.
+  * @param __PHASE__ CRYP AES ciphering/deciphering/authentication algorithm phase.
   * @retval SET (__PHASE__ is valid) or RESET (__PHASE__ is invalid)
   */                               
 #define IS_CRYP_GCMCMAC_PHASE(__PHASE__) (((__PHASE__) == CRYP_GCM_INIT_PHASE)       || \