mbed official
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_rcc.h
- Revision:
- 119:aae6fcc7d9bb
- Parent:
- 96:487b796308b0
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_rcc.h Wed Apr 13 12:19:19 2016 +0100
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_rcc.h Wed Apr 27 12:10:56 2016 -0500
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l0xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 06-February-2015
+ * @version V1.5.0
+ * @date 8-January-2016
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -54,7 +54,9 @@
* @{
*/
-/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
/**
* @brief RCC PLL configuration structure definition
@@ -98,7 +100,8 @@
uint32_t LSIState; /*!< The new state of the LSI.
This parameter can be a value of @ref RCC_LSI_Config */
-#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) && \
+ !defined (STM32L011xx) && !defined (STM32L021xx)
uint32_t HSI48State; /*!< The new state of the HSI48.
This parameter can be a value of @ref RCC_HSI48_Config */
#endif
@@ -138,8 +141,12 @@
}RCC_ClkInitTypeDef;
-
-/** @defgroup RCC_Private_Constants RCC Private constatnts
+/**
+ * @}
+ */
+
+/* Private constants --------------------------------------------------------*/
+/** @addtogroup RCC_Private
* @brief RCC registers bit address in the alias region
* @{
*/
@@ -159,31 +166,36 @@
/* CIER register byte 0 (Bits[0:8]) base address */
#define CIER_BYTE0_ADDRESS ((uint32_t)(RCC_BASE + 0x10 + 0x00))
-#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
-#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-
/**
* @}
*/
-
+
+/* Exported constants --------------------------------------------------------*/
/** @defgroup RCC_Exported_Constants RCC Exported Constants
* @{
*/
-/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
+/** @defgroup RCC_Timeout_Value Timeout Values
* @{
*/
-#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
-#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
-#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
-#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
-#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
-#define RCC_OSCILLATORTYPE_MSI ((uint32_t)0x00000010)
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
+#define RCC_HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000) /*!< Oscillator configuration unchanged */
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001) /*!< HSE to configure */
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002) /*!< HSI to configure */
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004) /*!< LSE to configure */
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008) /*!< LSI to configure */
+#define RCC_OSCILLATORTYPE_MSI ((uint32_t)0x00000010) /*!< MSI to configure */
#if !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
#define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020)
-#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) ((__OSCILLATOR__) <= 0x3F)
-#else
-#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) ((__OSCILLATOR__) <= 0x1F)
#endif /* !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) */
/**
@@ -197,8 +209,6 @@
#define RCC_HSE_ON RCC_CR_HSEON
#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))
-#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
- ((__HSE__) == RCC_HSE_BYPASS))
/**
* @}
*/
@@ -210,38 +220,12 @@
#define RCC_LSE_ON RCC_CSR_LSEON
#define RCC_LSE_BYPASS ((uint32_t)(RCC_CSR_LSEBYP | RCC_CSR_LSEON))
-#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
- ((__LSE__) == RCC_LSE_BYPASS))
/**
* @}
*/
-/** @defgroup RCC_MSI_Clock_Range RCC MSI Clock Range
- * @{
- */
-
-#define RCC_MSIRANGE_0 RCC_ICSCR_MSIRANGE_0 /*!< MSI = 65.536 KHz */
-#define RCC_MSIRANGE_1 RCC_ICSCR_MSIRANGE_1 /*!< MSI = 131.072 KHz */
-#define RCC_MSIRANGE_2 RCC_ICSCR_MSIRANGE_2 /*!< MSI = 262.144 KHz */
-#define RCC_MSIRANGE_3 RCC_ICSCR_MSIRANGE_3 /*!< MSI = 524.288 KHz */
-#define RCC_MSIRANGE_4 RCC_ICSCR_MSIRANGE_4 /*!< MSI = 1.048 MHz */
-#define RCC_MSIRANGE_5 RCC_ICSCR_MSIRANGE_5 /*!< MSI = 2.097 MHz */
-#define RCC_MSIRANGE_6 RCC_ICSCR_MSIRANGE_6 /*!< MSI = 4.194 MHz */
-
-#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \
- ((__RANGE__) == RCC_MSIRANGE_1) || \
- ((__RANGE__) == RCC_MSIRANGE_2) || \
- ((__RANGE__) == RCC_MSIRANGE_3) || \
- ((__RANGE__) == RCC_MSIRANGE_4) || \
- ((__RANGE__) == RCC_MSIRANGE_5) || \
- ((__RANGE__) == RCC_MSIRANGE_6))
-
-/**
- * @}
- */
-
/** @defgroup RCC_LSI_Config RCC LSI Config
* @{
*/
@@ -250,7 +234,6 @@
#define RCC_MSICALIBRATION_DEFAULT ((uint32_t)0) /* Default MSI calibration trimming value */
-#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
/**
* @}
*/
@@ -264,19 +247,17 @@
#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
-#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON))
/**
* @}
*/
#if !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
-/** @defgroup RCC_HSI48_Config
+/** @defgroup RCC_HSI48_Config RCC HSI48 Configuration
* @{
*/
#define RCC_HSI48_OFF ((uint8_t)0x00)
#define RCC_HSI48_ON ((uint8_t)0x01)
-#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON))
/**
* @}
*/
@@ -289,19 +270,16 @@
#define RCC_PLL_OFF ((uint8_t)0x01)
#define RCC_PLL_ON ((uint8_t)0x02)
-#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || ((__PLL__) == RCC_PLL_ON))
/**
* @}
*/
-/** @defgroup RCC_PLL_Clock_Source PCC PLL Clock Source
+/** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
* @{
*/
#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI
#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE
-#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
- ((__SOURCE__) == RCC_PLLSOURCE_HSE))
/**
* @}
@@ -320,11 +298,7 @@
#define RCC_PLLMUL_24 RCC_CFGR_PLLMUL24
#define RCC_PLLMUL_32 RCC_CFGR_PLLMUL32
#define RCC_PLLMUL_48 RCC_CFGR_PLLMUL48
-#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLLMUL_3) || ((__MUL__) == RCC_PLLMUL_4) || \
- ((__MUL__) == RCC_PLLMUL_6) || ((__MUL__) == RCC_PLLMUL_8) || \
- ((__MUL__) == RCC_PLLMUL_12) || ((__MUL__) == RCC_PLLMUL_16) || \
- ((__MUL__) == RCC_PLLMUL_24) || ((__MUL__) == RCC_PLLMUL_32) || \
- ((__MUL__) == RCC_PLLMUL_48))
+
/**
* @}
*/
@@ -336,8 +310,24 @@
#define RCC_PLLDIV_2 RCC_CFGR_PLLDIV2
#define RCC_PLLDIV_3 RCC_CFGR_PLLDIV3
#define RCC_PLLDIV_4 RCC_CFGR_PLLDIV4
-#define IS_RCC_PLL_DIV(__DIV__) (((__DIV__) == RCC_PLLDIV_2) || ((__DIV__) == RCC_PLLDIV_3) || \
- ((__DIV__) == RCC_PLLDIV_4))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MSI_Clock_Range RCC MSI Clock Range
+ * @{
+ */
+
+#define RCC_MSIRANGE_0 RCC_ICSCR_MSIRANGE_0 /*!< MSI = 65.536 KHz */
+#define RCC_MSIRANGE_1 RCC_ICSCR_MSIRANGE_1 /*!< MSI = 131.072 KHz */
+#define RCC_MSIRANGE_2 RCC_ICSCR_MSIRANGE_2 /*!< MSI = 262.144 KHz */
+#define RCC_MSIRANGE_3 RCC_ICSCR_MSIRANGE_3 /*!< MSI = 524.288 KHz */
+#define RCC_MSIRANGE_4 RCC_ICSCR_MSIRANGE_4 /*!< MSI = 1.048 MHz */
+#define RCC_MSIRANGE_5 RCC_ICSCR_MSIRANGE_5 /*!< MSI = 2.097 MHz */
+#define RCC_MSIRANGE_6 RCC_ICSCR_MSIRANGE_6 /*!< MSI = 4.194 MHz */
+
+
/**
* @}
*/
@@ -345,80 +335,63 @@
/** @defgroup RCC_System_Clock_Type RCC System Clock Type
* @{
*/
-#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
-#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
-#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
-#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
-
-#define IS_RCC_CLOCKTYPE(__CLK__) ((1 <= (__CLK__)) && ((__CLK__) <= 15))
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) /*!< SYSCLK to configure */
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) /*!< HCLK to configure */
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) /*!< PCLK1 to configure */
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) /*!< PCLK2 to configure */
/**
* @}
*/
-
+
/** @defgroup RCC_System_Clock_Source RCC System Clock Source
* @{
*/
-#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI
-#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
-#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
-#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
-
-#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
-/**
- * @}
- */
-
-/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
- * @{
- */
-#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
-#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
-#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
-
+#define RCC_SYSCLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
/**
* @}
*/
-/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock SOurce
+/** @defgroup RCC_System_Clock_SOURCE_Status RCC System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
* @{
*/
-#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
-#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
-#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
-#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
-#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
-#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
-#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
-#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
-#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
-
-#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
- ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
- ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
- ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
- ((__HCLK__) == RCC_SYSCLK_DIV512))
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
/**
* @}
- */
-
-/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1 Clock Source
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1 APB2 Clock Source
* @{
*/
-#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
-#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
-#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
-#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
-#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
-
-#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
- ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
- ((__PCLK__) == RCC_HCLK_DIV16))
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
/**
* @}
- */
+ */
/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
* @{
@@ -426,21 +399,23 @@
#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000)
#define RCC_RTCCLKSOURCE_LSE RCC_CSR_RTCSEL_LSE
#define RCC_RTCCLKSOURCE_LSI RCC_CSR_RTCSEL_LSI
+#define RCC_RTCCLKSOURCE_HSE_DIVX RCC_CSR_RTCSEL_HSE
+
#define RCC_RTCCLKSOURCE_HSE_DIV2 RCC_CSR_RTCSEL_HSE
#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)RCC_CSR_RTCSEL_HSE | RCC_CR_RTCPRE_0)
#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)RCC_CSR_RTCSEL_HSE | RCC_CR_RTCPRE_1)
#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)RCC_CSR_RTCSEL_HSE | RCC_CR_RTCPRE)
-#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16))
+
+#define RCC_RTC_HSE_DIV_2 (uint32_t)0x00000000U /*!< HSE is divided by 2 for RTC clock */
+#define RCC_RTC_HSE_DIV_4 RCC_CR_RTCPRE_0 /*!< HSE is divided by 4 for RTC clock */
+#define RCC_RTC_HSE_DIV_8 RCC_CR_RTCPRE_1 /*!< HSE is divided by 8 for RTC clock */
+#define RCC_RTC_HSE_DIV_16 RCC_CR_RTCPRE /*!< HSE is divided by 16 for RTC clock */
+
/**
* @}
*/
-/** @defgroup RCC_MCO_Clock_Source RCC MCo Clock Source
+/** @defgroup RCC_MCO1_Clock_Source RCC MCO1 Clock Source
* @{
*/
@@ -452,22 +427,11 @@
#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO_PLL
#define RCC_MCO1SOURCE_LSI RCC_CFGR_MCO_LSI
#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO_LSE
-#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) \
+ && !defined (STM32L011xx) && !defined (STM32L021xx)
#define RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCO_HSI48
#endif
-
-#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
-#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_HSI48))
-#else
-#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
- ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE))
-#endif
+
/**
* @}
@@ -483,11 +447,6 @@
#define RCC_MCODIV_8 RCC_CFGR_MCO_PRE_8
#define RCC_MCODIV_16 RCC_CFGR_MCO_PRE_16
-#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || \
- ((__DIV__) == RCC_MCODIV_2) || \
- ((__DIV__) == RCC_MCODIV_4) || \
- ((__DIV__) == RCC_MCODIV_8) || \
- ((__DIV__) == RCC_MCODIV_16))
/**
* @}
*/
@@ -497,8 +456,11 @@
*/
#define RCC_MCO1 ((uint32_t)0x00000000)
#define RCC_MCO2 ((uint32_t)0x00000001)
+#if defined(STM32L031xx) || defined(STM32L041xx) || defined(STM32L073xx) || defined(STM32L083xx) || \
+ defined(STM32L072xx) || defined(STM32L082xx) || defined(STM32L071xx) || defined(STM32L081xx)
+#define RCC_MCO3 ((uint32_t)0x00000002)
+#endif
-#define IS_RCC_MCO(__MCOx__) (((__MCOx__) == RCC_MCO1) || ((__MCOx__) == RCC_MCO2))
/**
* @}
*/
@@ -513,50 +475,17 @@
#define RCC_IT_PLLRDY RCC_CIFR_PLLRDYF
#define RCC_IT_MSIRDY RCC_CIFR_MSIRDYF
-#define RCC_IT_LSECSS RCC_CIFR_LSECSSF
-#define RCC_IT_CSS RCC_CIFR_CSSF
-#if !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
-#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF
-
-#define IS_RCC_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_HSI48RDY) || ((__IT__) == RCC_IT_LSECSS))
-
-#define IS_RCC_GET_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_CSS) || ((__IT__) == RCC_IT_HSI48RDY) || \
- ((__IT__) == RCC_IT_LSECSS))
+#define RCC_IT_CSSLSE RCC_CIFR_CSSLSEF
+#define RCC_IT_CSSHSE RCC_CIFR_CSSHSEF
-#define IS_RCC_CLEAR_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_CSS) || ((__IT__) == RCC_IT_HSI48RDY) || \
- ((__IT__) == RCC_IT_LSECSS))
-#else
-#define IS_RCC_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_LSECSS))
-
-#define IS_RCC_GET_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_CSS) || ((__IT__) == RCC_IT_LSECSS))
-
-
-#define IS_RCC_CLEAR_IT(__IT__) (((__IT__) == RCC_IT_LSIRDY) || ((__IT__) == RCC_IT_LSERDY) || \
- ((__IT__) == RCC_IT_HSIRDY) || ((__IT__) == RCC_IT_HSERDY) || \
- ((__IT__) == RCC_IT_PLLRDY) || ((__IT__) == RCC_IT_MSIRDY) || \
- ((__IT__) == RCC_IT_CSS) || ((__IT__) == RCC_IT_LSECSS))
-
+#if !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#define RCC_IT_HSI48RDY RCC_CIFR_HSI48RDYF
#endif /* !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) */
/**
* @}
*/
-/** @defgroup RCC_Flag
+/** @defgroup RCC_Flag RCC Flag
* Elements values convention: 0XXYYYYYb
* - YYYYY : Flag position in the register
* - 0XX : Register index
@@ -590,8 +519,6 @@
#define RCC_FLAG_HSI48RDY ((uint8_t)0x61)
#endif /* !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) */
-#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F)
-#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0xFF)
/**
* @}
@@ -604,11 +531,13 @@
/** @defgroup RCC_Exported_Macros RCC Exported Macros
* @{
*/
-
-/** @brief Enable or disable the AHB peripheral clock.
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable AHB Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -635,15 +564,20 @@
} while(0)
-#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~ (RCC_AHBENR_DMA1EN))
-#define __HAL_RCC_MIF_CLK_DISABLE() (RCC->AHBENR &= ~ (RCC_AHBENR_MIFEN))
-#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~ (RCC_AHBENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN)
+#define __HAL_RCC_MIF_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_MIFEN)
+#define __HAL_RCC_CRC_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN)
+/**
+ * @}
+ */
-/** @brief Enable or disable the IOPORT peripheral clock.
+/** @defgroup RCC_IOPORT_Clock_Enable_Disable IOPORT Peripheral Clock Enable Disable
+ * @brief Enable or disable the IOPORT peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
@@ -669,14 +603,6 @@
UNUSED(tmpreg); \
} while(0)
-#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN);\
- UNUSED(tmpreg); \
- } while(0)
-
#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
__IO uint32_t tmpreg; \
SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOHEN);\
@@ -686,143 +612,376 @@
} while(0)
-#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->IOPENR &= ~(RCC_IOPENR_GPIOAEN))
-#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->IOPENR &= ~(RCC_IOPENR_GPIOBEN))
-#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->IOPENR &= ~(RCC_IOPENR_GPIOCEN))
-#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->IOPENR &= ~(RCC_IOPENR_GPIODEN))
-#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->IOPENR &= ~(RCC_IOPENR_GPIOHEN))
+#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN)
+#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN)
+#define __HAL_RCC_GPIOC_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN)
+#define __HAL_RCC_GPIOH_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOHEN)
+/**
+ * @}
+ */
-/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
-#define __HAL_RCC_WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
-#define __HAL_RCC_PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+#define __HAL_RCC_WWDG_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_PWR_CLK_ENABLE() SET_BIT(RCC->APB1ENR, (RCC_APB1ENR_PWREN))
-#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~ (RCC_APB1ENR_WWDGEN))
-#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~ (RCC_APB1ENR_PWREN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_PWR_CLK_DISABLE() CLEAR_BIT(RCC->APB1ENR, (RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
-/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
-#define __HAL_RCC_SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
-#define __HAL_RCC_DBGMCU_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_DBGMCUEN))
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_DBGMCU_CLK_ENABLE() SET_BIT(RCC->APB2ENR, (RCC_APB2ENR_DBGMCUEN))
+
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_DBGMCU_CLK_DISABLE() CLEAR_BIT(RCC->APB2ENR, (RCC_APB2ENR_DBGMCUEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enabled or Disabled Status
+ * @brief Check whether the AHB peripheral clock is enabled or not.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN) != RESET)
+#define __HAL_RCC_MIF_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_MIFEN) != RESET)
+#define __HAL_RCC_CRC_IS_CLK_ENABLED() (READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN) != RESET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_IOPORT_Peripheral_Clock_Enable_Disable_Status IOPORT Peripheral Clock Enabled or Disabled Status
+ * @brief Check whether the IOPORT peripheral clock is enabled or not.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
-#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~ (RCC_APB2ENR_SYSCFGEN))
-#define __HAL_RCC_DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~ (RCC_APB2ENR_DBGMCUEN))
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED() (READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOHEN) != RESET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enabled or Disabled Status
+ * @brief Check whether the APB1 peripheral clock is enabled or not.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() (READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN) != RESET)
-/** @brief Force or release AHB peripheral reset.
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enabled or Disabled Status
+ * @brief Check whether the APB2 peripheral clock is enabled or not.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN) != RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_ENABLED() (READ_BIT(RCC->APB2ENR, RCC_APB2ENR_DBGMCUEN) != RESET)
+
+/**
+ * @}
+ */
+
+ /** @defgroup RCC_AHB_Force_Release_Reset AHB Peripheral Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
*/
#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
-#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_DMA1RST))
-#define __HAL_RCC_MIF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_MIFRST))
-#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_DMA1RST))
+#define __HAL_RCC_MIF_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_MIFRST))
+#define __HAL_RCC_CRC_FORCE_RESET() SET_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_CRCRST))
#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
-#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHBRSTR &= ~ (RCC_AHBRSTR_CRCRST))
-#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHBRSTR &= ~ (RCC_AHBRSTR_DMA1RST))
-#define __HAL_RCC_MIF_RELEASE_RESET() (RCC->AHBRSTR &= ~ (RCC_AHBRSTR_MIFRST))
-
-
-/** @brief Force or release IOPORT peripheral reset.
+#define __HAL_RCC_CRC_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_DMA1RST))
+#define __HAL_RCC_MIF_RELEASE_RESET() CLEAR_BIT(RCC->AHBRSTR, (RCC_AHBRSTR_MIFRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_IOPORT_Force_Release_Reset IOPORT Peripheral Force Release Reset
+ * @brief Force or release IOPORT peripheral reset.
+ * @{
*/
#define __HAL_RCC_IOP_FORCE_RESET() (RCC->IOPRSTR = 0xFFFFFFFF)
-#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->IOPRSTR |= (RCC_IOPRSTR_GPIOARST))
-#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->IOPRSTR |= (RCC_IOPRSTR_GPIOBRST))
-#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->IOPRSTR |= (RCC_IOPRSTR_GPIOCRST))
-#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->IOPRSTR |= (RCC_IOPRSTR_GPIODRST))
-#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->IOPRSTR |= (RCC_IOPRSTR_GPIOHRST))
+#define __HAL_RCC_GPIOA_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() SET_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOHRST))
#define __HAL_RCC_IOP_RELEASE_RESET() (RCC->IOPRSTR = 0x00)
-#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->IOPRSTR &= ~(RCC_IOPRSTR_GPIOARST))
-#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->IOPRSTR &= ~(RCC_IOPRSTR_GPIOBRST))
-#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->IOPRSTR &= ~(RCC_IOPRSTR_GPIOCRST))
-#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->IOPRSTR &= ~(RCC_IOPRSTR_GPIODRST))
-#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->IOPRSTR &= ~(RCC_IOPRSTR_GPIOHRST))
+#define __HAL_RCC_GPIOA_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOCRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() CLEAR_BIT(RCC->IOPRSTR, (RCC_IOPRSTR_GPIOHRST))
-/** @brief Force or release APB1 peripheral reset.
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Peripheral Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
*/
#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
-#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
-#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_WWDG_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_FORCE_RESET() SET_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_PWRRST))
#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
-#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~ (RCC_APB1RSTR_WWDGRST))
-#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~ (RCC_APB1RSTR_PWRRST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_RELEASE_RESET() CLEAR_BIT(RCC->APB1RSTR, (RCC_APB1RSTR_PWRRST))
-/** @brief Force or release APB2 peripheral reset.
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Peripheral Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
*/
#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
-#define __HAL_RCC_DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
-#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_DBGMCU_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_DBGMCURST))
+#define __HAL_RCC_SYSCFG_FORCE_RESET() SET_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SYSCFGRST))
#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
-#define __HAL_RCC_DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~ (RCC_APB2RSTR_DBGMCURST))
-#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~ (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_DBGMCU_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_DBGMCURST))
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() CLEAR_BIT(RCC->APB2RSTR, (RCC_APB2RSTR_SYSCFGRST))
+/**
+ * @}
+ */
+
-/** @brief Enable or disable the AHB peripheral clock during Low Power (Sleep) mode.
+/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable AHB Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the AHB peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral activated clocks remain enabled during SLEEP mode.
+ * @{
*/
-#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHBSMENR |= (RCC_AHBSMENR_CRCSMEN))
-#define __HAL_RCC_MIF_CLK_SLEEP_ENABLE() (RCC->AHBSMENR |= (RCC_AHBSMENR_MIFSMEN))
-#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() (RCC->AHBSMENR |= (RCC_AHBSMENR_SRAMSMEN))
-#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHBSMENR |= (RCC_AHBSMENR_DMA1SMEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_CRCSMEN))
+#define __HAL_RCC_MIF_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_MIFSMEN))
+#define __HAL_RCC_SRAM_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_SRAMSMEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() SET_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_DMA1SMEN))
+
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_CRCSMEN))
+#define __HAL_RCC_MIF_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_MIFSMEN))
+#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_SRAMSMEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->AHBSMENR, (RCC_AHBSMENR_DMA1SMEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable IOPORT Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the IOPORT peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral activated clocks remain enabled during SLEEP mode.
+ * @{
+ */
+
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOASMEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOBSMEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOCSMEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() SET_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOHSMEN))
-#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHBSMENR &= ~ (RCC_AHBSMENR_CRCSMEN))
-#define __HAL_RCC_MIF_CLK_SLEEP_DISABLE() (RCC->AHBSMENR &= ~ (RCC_AHBSMENR_MIFSMEN))
-#define __HAL_RCC_SRAM_CLK_SLEEP_DISABLE() (RCC->AHBSMENR &= ~ (RCC_AHBSMENR_SRAMSMEN))
-#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHBSMENR &= ~ (RCC_AHBSMENR_DMA1SMEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOASMEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOBSMEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOCSMEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->IOPSMENR, (RCC_IOPSMENR_GPIOHSMEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable APB1 Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral activated clocks remain enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_WWDGSMEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_PWRSMEN))
-/** @brief Enable or disable the IOPORT peripheral clock during Low Power (Sleep) mode.
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_WWDGSMEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB1SMENR, (RCC_APB1SMENR_PWRSMEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable APB2 Peripheral Clock Sleep Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
* @note By default, all peripheral activated clocks remain enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_SYSCFGSMEN))
+#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() SET_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_DBGMCUSMEN))
+
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_SYSCFGSMEN))
+#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() CLEAR_BIT(RCC->APB2SMENR, (RCC_APB2SMENR_DBGMCUSMEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Sleep_Enable_Disable_Status AHB Peripheral Clock Sleep Enabled or Disabled Status
+ * @brief Check whether the AHB peripheral clock during Low Power (Sleep) mode is enabled or not.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_CRCSMEN) != RESET)
+#define __HAL_RCC_MIF_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_MIFSMEN) != RESET)
+#define __HAL_RCC_SRAM_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_SRAMSMEN) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->AHBSMENR, RCC_AHBSMENR_DMA1SMEN) != RESET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_IOPORT_Clock_Sleep_Enable_Disable_Status IOPORT Peripheral Clock Sleep Enabled or Disabled Status
+ * @brief Check whether the IOPORT peripheral clock during Low Power (Sleep) mode is enabled or not.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOASMEN) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOBSMEN) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOCSMEN) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->IOPSMENR, RCC_IOPSMENR_GPIOHSMEN) != RESET)
+
+/**
+ * @}
*/
-#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->IOPSMENR |= (RCC_IOPSMENR_GPIOASMEN))
-#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->IOPSMENR |= (RCC_IOPSMENR_GPIOBSMEN))
-#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->IOPSMENR |= (RCC_IOPSMENR_GPIOCSMEN))
-#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->IOPSMENR |= (RCC_IOPSMENR_GPIODSMEN))
-#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->IOPSMENR |= (RCC_IOPSMENR_GPIOHSMEN))
+/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enabled or Disabled Status
+ * @brief Check whether the APB1 peripheral clock during Low Power (Sleep) mode is enabled or not.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_WWDGSMEN) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB1SMENR, RCC_APB1SMENR_PWRSMEN) != RESET)
-#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->IOPSMENR &= ~(RCC_IOPSMENR_GPIOASMEN))
-#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->IOPSMENR &= ~(RCC_IOPSMENR_GPIOBSMEN))
-#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->IOPSMENR &= ~(RCC_IOPSMENR_GPIOCSMEN))
-#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->IOPSMENR &= ~(RCC_IOPSMENR_GPIODSMEN))
-#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->IOPSMENR &= ~(RCC_IOPSMENR_GPIOHSMEN))
-
-/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enabled or Disabled Status
+ * @brief Check whether the APB2 peripheral clock during Low Power (Sleep) mode is enabled or not.
* @note Peripheral clock gating in SLEEP mode can be used to further reduce
* power consumption.
* @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral activated clocks remain enabled during SLEEP mode.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_SYSCFGSMEN) != RESET)
+#define __HAL_RCC_DBGMCU_IS_CLK_SLEEP_ENABLED() (READ_BIT(RCC->APB2SMENR, RCC_APB2SMENR_DBGMCUSMEN) != RESET)
+
+/**
+ * @}
*/
-#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1SMENR |= (RCC_APB1SMENR_WWDGSMEN))
-#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1SMENR |= (RCC_APB1SMENR_PWRSMEN))
+
+/** @defgroup RCC_Backup_Domain_Reset RCC Backup Domain Reset
+ * @{
+ */
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->CSR, RCC_CSR_RTCRST)
+#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->CSR, RCC_CSR_RTCRST)
-#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1SMENR &= ~ (RCC_APB1SMENR_WWDGSMEN))
-#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1SMENR &= ~ (RCC_APB1SMENR_PWRSMEN))
+/**
+ * @}
+ */
-/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral actiated clocks remain enabled during SLEEP mode.
+/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_RTCEN)
+#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_RTCEN)
+
+/**
+ * @}
*/
-#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2SMENR |= (RCC_APB2SMENR_SYSCFGSMEN))
-#define __HAL_RCC_DBGMCU_CLK_SLEEP_ENABLE() (RCC->APB2SMENR |= (RCC_APB2SMENR_DBGMCUSMEN))
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
+#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
-#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2SMENR &= ~ (RCC_APB2SMENR_SYSCFGSMEN))
-#define __HAL_RCC_DBGMCU_CLK_SLEEP_DISABLE() (RCC->APB2SMENR &= ~ (RCC_APB2SMENR_DBGMCUSMEN))
-
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->ICSCR,\
+ RCC_ICSCR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << 8))
+
/** @brief Macro to enable or disable the Internal High Speed oscillator (HSI).
* @note After enabling the HSI, the application software should wait on
* HSIRDY flag to be set indicating that HSI clock is stable and can
@@ -840,25 +999,8 @@
* clock cycles.
*/
#define __HAL_RCC_HSI_CONFIG(__STATE__) \
- MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIVEN , (uint32_t)(__STATE__))
-
-/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
- * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
- * It is used (enabled by hardware) as system clock source after startup
- * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
- * of the HSE used directly or indirectly as system clock (if the Clock
- * Security System CSS is enabled).
- * @note HSI can not be stopped if it is used as system clock source. In this case,
- * you have to select another source of the system clock then stop the HSI.
- * @note After enabling the HSI, the application software should wait on HSIRDY
- * flag to be set indicating that HSI clock is stable and can be used as
- * system clock source.
- * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
- * clock cycles.
- */
-#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
-#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
-
+ MODIFY_REG(RCC->CR, RCC_CR_HSION | RCC_CR_HSIDIVEN , (uint32_t)(__STATE__))
+
/**
* @brief Macros to enable or disable the Internal Multi Speed oscillator (MSI).
* @note The MSI is stopped by hardware when entering STOP and STANDBY modes.
@@ -878,14 +1020,6 @@
#define __HAL_RCC_MSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_MSION)
#define __HAL_RCC_MSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_MSION)
-/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
- * @note The calibration is used to compensate for the variations in voltage
- * and temperature that influence the frequency of the internal HSI RC.
- * @param __HSICalibrationValue__: specifies the calibration trimming value.
- * This parameter must be a number between 0 and 0x1F.
- */
-#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->ICSCR,\
- RCC_ICSCR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << 8))
/** @brief Macro Adjusts the Internal Multi Speed oscillator (MSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
@@ -904,7 +1038,7 @@
* around 2.097 MHz. The MSI clock does not change after wake-up from
* STOP mode.
* @note The MSI clock range can be modified on the fly.
- * @param RCC_MSIRange: specifies the MSI Clock range.
+ * @param __RCC_MSIRange__: specifies the MSI Clock range.
* This parameter must be one of the following values:
* @arg RCC_MSIRANGE_0: MSI clock is around 65.536 KHz
* @arg RCC_MSIRANGE_1: MSI clock is around 131.072 KHz
@@ -916,6 +1050,21 @@
*/
#define __HAL_RCC_MSI_RANGE_CONFIG(__RCC_MSIRange__) (MODIFY_REG(RCC->ICSCR,\
RCC_ICSCR_MSIRANGE, (uint32_t)(__RCC_MSIRange__) ))
+
+/** @brief Macro to get the Internal Multi Speed oscillator (__MSI__) clock range in run mode
+ * @retval MSI clock range.
+ * This parameter must be one of the following values:
+ * @arg RCC_MSIRANGE_0: MSI clock is around 65.536 KHz
+ * @arg RCC_MSIRANGE_1: MSI clock is around 131.072 KHz
+ * @arg RCC_MSIRANGE_2: MSI clock is around 262.144 KHz
+ * @arg RCC_MSIRANGE_3: MSI clock is around 524.288 KHz
+ * @arg RCC_MSIRANGE_4: MSI clock is around 1.048 MHz
+ * @arg RCC_MSIRANGE_5: MSI clock is around 2.097 MHz (default after Reset or wake-up from STANDBY)
+ * @arg RCC_MSIRANGE_6: MSI clock is around 4.194 MHz
+
+ */
+#define __HAL_RCC_GET_MSI_RANGE() \
+ ((uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSIRANGE) >> 12))
/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
* @note After enabling the LSI, the application software should wait on
@@ -925,11 +1074,14 @@
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
* clock cycles.
*/
-#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
+#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
/**
* @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
+ * supported by this macro. User should request a transition to HSE Off
+ * first and then HSE On or HSE Bypass.
* @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
* software should wait on HSERDY flag to be set indicating that HSE clock
* is stable and can be used to clock the PLL and/or system clock.
@@ -949,29 +1101,36 @@
*/
#define __HAL_RCC_HSE_CONFIG(__STATE__) \
do { \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ __IO uint32_t tmpreg; \
if((__STATE__) == RCC_HSE_ON) \
{ \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
SET_BIT(RCC->CR, RCC_CR_HSEON); \
} \
else if((__STATE__) == RCC_HSE_BYPASS) \
{ \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
SET_BIT(RCC->CR, RCC_CR_HSEON); \
} \
else \
{ \
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
+ /* Delay after an RCC peripheral clock */ \
+ tmpreg = READ_BIT(RCC->CR, RCC_CR_HSEON); \
+ UNUSED(tmpreg); \
CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
} \
} while(0)
-
+
/**
* @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
+ * supported by this macro. User should request a transition to LSE Off
+ * first and then LSE On or LSE Bypass.
* @note As the LSE is in the Backup domain and write access is denied to
- * this domain after reset, you have to enable write access using
+ * this domain after reset, you have to enable write access using
* HAL_PWR_EnableBkUpAccess() function before to configure the LSE
- * (to be done once after reset).
+ * (to be done once after reset).
* @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
* software should wait on LSERDY flag to be set indicating that LSE clock
* is stable and can be used to clock the RTC.
@@ -982,7 +1141,7 @@
* @arg RCC_LSE_ON: turn ON the LSE oscillator.
* @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
*/
-#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
do { \
if((__STATE__) == RCC_LSE_ON) \
{ \
@@ -991,6 +1150,7 @@
else if((__STATE__) == RCC_LSE_OFF) \
{ \
CLEAR_BIT(RCC->CSR, RCC_CSR_LSEON); \
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSEBYP); \
} \
else if((__STATE__) == RCC_LSE_BYPASS) \
{ \
@@ -1005,11 +1165,7 @@
} \
} while(0)
-/** @brief Macros to enable or disable the the RTC clock.
- * @note These macros must be used only after the RTC clock source was selected.
- */
-#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_RTCEN)
-#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_RTCEN)
+
/**
* @brief Configures or Get the RTC and LCD clock (RTCCLK / LCDCLK).
@@ -1021,7 +1177,7 @@
* is reset using RCC_RTCResetCmd function, or by a Power On Reset (POR)
* @note The RTC clock (RTCCLK) is used also to clock the LCD (LCDCLK).
*
- * @param RCC_RTCCLKSource: specifies the RTC clock source.
+ * @param __RTCCLKSOURCE__: specifies the RTC clock source.
* This parameter can be one of the following values:
* @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
* @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
@@ -1037,22 +1193,39 @@
* @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
* RTC clock source).
*/
-#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_CSR_RTCSEL) == RCC_CSR_RTCSEL) ? \
- MODIFY_REG(RCC->CR, RCC_CR_RTCPRE, ((__RTCCLKSource__) & 0xFFFCFFFF)) : CLEAR_BIT(RCC->CR, RCC_CR_RTCPRE)
+
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSOURCE__) (((__RTCCLKSOURCE__) & RCC_CSR_RTCSEL) == RCC_CSR_RTCSEL) ? \
+ MODIFY_REG(RCC->CR, RCC_CR_RTCPRE, (uint32_t)((__RTCCLKSOURCE__) & RCC_CR_RTCPRE)) : \
+ CLEAR_BIT(RCC->CR, RCC_CR_RTCPRE)
-#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
- MODIFY_REG( RCC->CSR, RCC_CSR_RTCSEL, (uint32_t)(__RTCCLKSource__)); \
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSOURCE__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSOURCE__); \
+ MODIFY_REG( RCC->CSR, RCC_CSR_RTCSEL, (uint32_t)((__RTCCLKSOURCE__) & RCC_CSR_RTCSEL)); \
} while (0)
+
+ /**
+ * @brief Get the RTC and LCD clock (RTCCLK / LCDCLK).
+ *
+ * @retval The clock source can be one of the following values:
+ * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
+ * @arg @ref RCC_RTCCLKSOURCE_HSE_DIVX HSE divided by X selected as RTC clock (X can be retrieved thanks to @ref __HAL_RCC_GET_RTC_HSE_PRESCALER()
+ *
+ */
#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_RTCSEL)))
-
-/** @brief Macros to force or release the Backup domain reset.
- * @note This function resets the RTC peripheral (including the backup registers)
- * and the RTC clock source selection in RCC_CSR register.
- * @note The BKPSRAM is not affected by this reset.
+
+ /**
+ * @brief Get the RTC and LCD HSE clock divider (RTCCLK / LCDCLK).
+ *
+ * @retval Returned value can be one of the following values:
+ * @arg @ref RCC_RTC_HSE_DIV_2: HSE divided by 2 selected as RTC clock
+ * @arg @ref RCC_RTC_HSE_DIV_4: HSE divided by 4 selected as RTC clock
+ * @arg @ref RCC_RTC_HSE_DIV_8: HSE divided by 8 selected as RTC clock
+ * @arg @ref RCC_RTC_HSE_DIV_16: HSE divided by 16 selected as RTC clock
+ *
*/
-#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->CSR, RCC_CSR_RTCRST)
-#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->CSR, RCC_CSR_RTCRST)
+#define __HAL_RCC_GET_RTC_HSE_PRESCALER() ((uint32_t)(READ_BIT(RCC->CR, RCC_CR_RTCPRE)))
/** @brief Macros to enable or disable the main PLL.
* @note After enabling the main PLL, the application software should wait on
@@ -1061,12 +1234,12 @@
* @note The main PLL can not be disabled if it is used as system clock source
* @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
*/
-#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
* @note This function must be used only when the main PLL is disabled.
- * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * @param __RCC_PLLSOURCE__: specifies the PLL entry clock source.
* This parameter can be one of the following values:
* @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
* @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
@@ -1091,19 +1264,10 @@
* @arg RCC_PLLDIV_4: PLL clock output = PLLVCO / 4
*/
-#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PLLMUL__ ,__PLLDIV__ ) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLDIV | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)| (__PLLDIV__)| (__RCC_PLLSource__)))
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__ , __PLLMUL__ ,__PLLDIV__ ) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLDIV | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)| (__PLLDIV__)| (__RCC_PLLSOURCE__)))
-/** @brief Macro to get the clock source used as system clock.
- * @retval The clock source used as system clock. The returned value can be one
- * of the following:
- * - RCC_CFGR_SWS_HSI: HSI used as system clock.
- * - RCC_CFGR_SWS_HSE: HSE used as system clock.
- * - RCC_CFGR_SWS_PLL: PLL used as system clock.
- */
-#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
-
-/** @brief Macro to get the oscillator used as PLL clock source.
+ /** @brief Macro to get the oscillator used as PLL clock source.
* @retval The oscillator used as PLL clock source. The returned value can be one
* of the following:
* - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
@@ -1111,7 +1275,53 @@
*/
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC))
-/** @defgroup RCC_Flags_Interrupts_Management
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __SYSCLKSOURCE__: specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_MSI: MSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ * @retval None
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_MSI: MSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSOURCE__ specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CFGR_MCO_HSI: HSI clock selected as MCO source
+ * @arg RCC_CFGR_MCO_MSI: MSI clock selected as MCO source
+ * @arg RCC_CFGR_MCO_HSE: HSE clock selected as MCO source
+ * @arg RCC_CFGR_MCO_PLL: PLL clock selected as MCO source
+ * @arg RCC_CFGR_MCO_LSI: LSI clock selected as MCO source
+ * @arg RCC_CFGR_MCO_LSE: LSE clock selected as MCO source
+ * @param __MCODIV__ specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_CFGR_MCO_PRE_1: no division applied to MCO clock
+ * @arg RCC_CFGR_MCO_PRE_2: division by 2 applied to MCO clock
+ * @arg RCC_CFGR_MCO_PRE_4: division by 4 applied to MCO clock
+ * @arg RCC_CFGR_MCO_PRE_8: division by 8 applied to MCO clock
+ * @arg RCC_CFGR_MCO_PRE_16: division by 16 applied to MCO clock
+ */
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCO_PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+
+
+/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
*/
@@ -1132,10 +1342,10 @@
* @arg RCC_IT_HSERDY: HSE ready interrupt
* @arg RCC_IT_PLLRDY: PLL ready interrupt
* @arg RCC_IT_MSIRDY: MSI ready interrupt
- * @arg RCC_IT_LSECSS: LSE CSS interrupt
+ * @arg RCC_IT_CSSLSE: LSE CSS interrupt
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
*/
-#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (RCC->CIER |= (__INTERRUPT__))
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) SET_BIT(RCC->CIER, (__INTERRUPT__))
/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIER[0:7] bits to disable
* the selected interrupts).
@@ -1154,10 +1364,10 @@
* @arg RCC_IT_PLLRDY: PLL ready interrupt
* @arg RCC_IT_MSIRDY: MSI ready interrupt
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
- * @arg RCC_IT_LSECSS: LSE CSS interrupt
+ * @arg RCC_IT_CSSLSE: LSE CSS interrupt
*/
-#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (RCC->CIER &= ~(__INTERRUPT__))
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) CLEAR_BIT(RCC->CIER, (__INTERRUPT__))
/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
* bits to clear the selected interrupt pending bits.
@@ -1170,8 +1380,8 @@
* @arg RCC_IT_PLLRDY: PLL ready interrupt
* @arg RCC_IT_MSIRDY: MSI ready interrupt
* @arg RCC_IT_HSI48RDY: HSI48 ready interrupt
- * @arg RCC_IT_LSECSS: LSE CSS interrupt
- * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @arg RCC_IT_CSSLSE: LSE CSS interrupt
+ * @arg RCC_IT_CSSHSE: Clock Security System interrupt
*/
#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (RCC->CICR = (__INTERRUPT__))
@@ -1184,11 +1394,12 @@
* @arg RCC_IT_HSERDY: HSE ready interrupt
* @arg RCC_IT_PLLRDY: PLL ready interrupt
* @arg RCC_IT_MSIRDY: MSI ready interrupt
- * @arg RCC_IT_LSECSS: LSE CSS interrupt
- * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @arg RCC_IT_CSSLSE: LSE CSS interrupt
+ * @arg RCC_IT_CSSHSE: Clock Security System interrupt
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
*/
-#define __HAL_RCC_GET_IT_SOURCE(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
/** @brief Set RMVF bit to clear the reset flags.
* The reset flags are: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST,
@@ -1200,6 +1411,7 @@
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSIDIV: HSI clock divider flag
* @arg RCC_FLAG_MSIRDY: MSI oscillator clock ready
* @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
* @arg RCC_FLAG_PLLRDY: PLL clock ready
@@ -1216,7 +1428,6 @@
* @arg RCC_FLAG_LPWRRST: Low Power reset
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
-#define RCC_FLAG_MASK ((uint8_t)0x1F)
#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->CSR :((((__FLAG__) >> 5) == 3)? \
RCC->CRRCR :RCC->CIFR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK))) != 0 ) ? 1 : 0 )
@@ -1228,6 +1439,119 @@
* @}
*/
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Defines used for Flags */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros
+ * @{
+ */
+
+#if !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx)
+#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) ((__OSCILLATOR__) <= 0x3F)
+#else
+#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) ((__OSCILLATOR__) <= 0x1F)
+#endif /* !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) */
+
+#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
+ ((__HSE__) == RCC_HSE_BYPASS))
+#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
+ ((__LSE__) == RCC_LSE_BYPASS))
+
+#define IS_RCC_MSI_CLOCK_RANGE(__RANGE__) (((__RANGE__) == RCC_MSIRANGE_0) || \
+ ((__RANGE__) == RCC_MSIRANGE_1) || \
+ ((__RANGE__) == RCC_MSIRANGE_2) || \
+ ((__RANGE__) == RCC_MSIRANGE_3) || \
+ ((__RANGE__) == RCC_MSIRANGE_4) || \
+ ((__RANGE__) == RCC_MSIRANGE_5) || \
+ ((__RANGE__) == RCC_MSIRANGE_6))
+
+#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
+#define IS_RCC_MSI(__MSI__) (((__MSI__) == RCC_MSI_OFF) || ((__MSI__) == RCC_MSI_ON))
+#define IS_RCC_HSI48(__HSI48__) (((__HSI48__) == RCC_HSI48_OFF) || ((__HSI48__) == RCC_HSI48_ON))
+
+#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) ||((__PLL__) == RCC_PLL_OFF) || ((__PLL__) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLLMUL_3) || ((__MUL__) == RCC_PLLMUL_4) || \
+ ((__MUL__) == RCC_PLLMUL_6) || ((__MUL__) == RCC_PLLMUL_8) || \
+ ((__MUL__) == RCC_PLLMUL_12) || ((__MUL__) == RCC_PLLMUL_16) || \
+ ((__MUL__) == RCC_PLLMUL_24) || ((__MUL__) == RCC_PLLMUL_32) || \
+ ((__MUL__) == RCC_PLLMUL_48))
+
+#define IS_RCC_PLL_DIV(__DIV__) (((__DIV__) == RCC_PLLDIV_2) || ((__DIV__) == RCC_PLLDIV_3) || \
+ ((__DIV__) == RCC_PLLDIV_4))
+
+#define IS_RCC_CLOCKTYPE(__CLK__) ((1 <= (__CLK__)) && ((__CLK__) <= 15))
+
+#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_MSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
+ ((__HCLK__) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
+ ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
+ ((__PCLK__) == RCC_HCLK_DIV16))
+
+#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV2) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV4) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV8) || \
+ ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV16))
+
+#if !defined (STM32L031xx) && !defined (STM32L041xx) && !defined(STM32L051xx) && !defined(STM32L061xx) && !defined(STM32L071xx) && !defined(STM32L081xx) \
+ && !defined (STM32L011xx) && !defined (STM32L021xx)
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSI48))
+#else
+#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSI) || ((__SOURCE__) == RCC_MCO1SOURCE_MSI) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) || \
+ ((__SOURCE__) == RCC_MCO1SOURCE_LSI) || ((__SOURCE__) == RCC_MCO1SOURCE_LSE))
+#endif
+
+#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1) || \
+ ((__DIV__) == RCC_MCODIV_2) || \
+ ((__DIV__) == RCC_MCODIV_4) || \
+ ((__DIV__) == RCC_MCODIV_8) || \
+ ((__DIV__) == RCC_MCODIV_16))
+
+#if defined(STM32L031xx) || defined(STM32L041xx) || defined(STM32L073xx) || defined(STM32L083xx) || \
+ defined(STM32L072xx) || defined(STM32L082xx) || defined(STM32L071xx) || defined(STM32L081xx)
+#define IS_RCC_MCO(__MCOx__) (((__MCOx__) == RCC_MCO1) || ((__MCOx__) == RCC_MCO2) || ((__MCOx__) == RCC_MCO3))
+#else
+#define IS_RCC_MCO(__MCOx__) (((__MCOx__) == RCC_MCO1) || ((__MCOx__) == RCC_MCO2))
+
+#endif
+
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F)
+#define IS_RCC_MSICALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0xFF)
+
+/**
+ * @}
+ */
+
/* Include RCC HAL Extension module */
#include "stm32l0xx_hal_rcc_ex.h"
@@ -1249,7 +1573,9 @@
* @{
*/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+#if !defined (STM32L011xx) && !defined (STM32L021xx)
void HAL_RCC_EnableCSS(void);
+#endif
uint32_t HAL_RCC_GetSysClockFreq(void);
uint32_t HAL_RCC_GetHCLKFreq(void);
uint32_t HAL_RCC_GetPCLK1Freq(void);
@@ -1268,7 +1594,8 @@
/**
* @}
*/
-
+
+
/**
* @}
*/
