The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_RAPIDIOT_KW41Z/TOOLCHAIN_IAR/fsl_dcdc.h
- Revision:
- 172:65be27845400
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_RAPIDIOT_KW41Z/TOOLCHAIN_IAR/fsl_dcdc.h Wed Feb 20 20:53:29 2019 +0000 @@ -0,0 +1,570 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_DCDC_H_ +#define _FSL_DCDC_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup dcdc + * @{ + */ + +/******************************************************************************* + * Definitions + ******************************************************************************/ +/*! @brief DCDC driver version. */ +#define FSL_DCDC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */ + +/*! + * @brief Status flags. + */ +enum _dcdc_status_flags_t +{ + kDCDC_LockedOKStatus = (1U << 0), /*!< Status to indicate DCDC lock. Read only bit. */ + kDCDC_PSwitchStatus = (1U << 1), /*!< Status to indicate PSWITCH signal. Read only bit. */ + kDCDC_PSwitchInterruptStatus = (1U << 2), /*!< PSWITCH edge detection interrupt status. */ +}; + +/*! + * @brief Interrupts. + */ +enum _dcdc_interrupt_enable_t +{ + kDCDC_PSwitchEdgeDetectInterruptEnable = DCDC_REG6_PSWITCH_INT_MUTE_MASK, /*!< Enable the edge detect interrupt. */ +}; + +/*! + * @brief Events for PSWITCH signal(pin). + */ +enum _dcdc_pswitch_detect_event_t +{ + kDCDC_PSwitchFallingEdgeDetectEnable = DCDC_REG6_PSWITCH_INT_FALL_EN_MASK, /*!< Enable falling edge detect. */ + kDCDC_PSwitchRisingEdgeDetectEnable = DCDC_REG6_PSWITCH_INT_RISE_EN_MASK, /*!< Enable rising edge detect. */ +}; + +/*! + * @brief DCDC work mode in SoC's low power condition. + */ +typedef enum _dcdc_work_mode +{ + kDCDC_WorkInContinuousMode = 0U, /*!< DCDC works in continuous mode when SOC is in low power mode. */ + kDCDC_WorkInPulsedMode = 1U, /*!< DCDC works in pulsed mode when SOC is in low power mode. */ +} dcdc_work_mode_t; + +/*! + * @brief Hysteretic upper/lower threshold value in low power mode. + */ +typedef enum _dcdc_hysteretic_threshold_offset_value +{ + kDCDC_HystereticThresholdOffset0mV = 0U, /*!< Target voltage value +/- 0mV. */ + kDCDC_HystereticThresholdOffset25mV = 1U, /*!< Target voltage value +/- 25mV. */ + kDCDC_HystereticThresholdOffset50mV = 2U, /*!< Target voltage value +/- 50mV. */ + kDCDC_HystereticThresholdOffset75mV = 3U, /*!< Target voltage value +/- 75mV. */ +} dcdc_hysteretic_threshold_offset_value_t; + +/*! + * @brief VBAT voltage divider. + */ +typedef enum _dcdc_vbat_divider +{ + kDCDC_VBatVoltageDividerOff = 0U, /*!< The sensor signal is disabled. */ + kDCDC_VBatVoltageDivider1 = 1U, /*!< VBat. */ + kDCDC_VBatVoltageDivider2 = 2U, /*!< VBat/2. */ + kDCDC_VBatVoltageDivider4 = 3U, /*!< VBat/4 */ +} dcdc_vbat_divider_t; + +/*! + * @brief Oscillator clock option. + */ +typedef enum _dcdc_clock_source_t +{ + kDCDC_ClockAutoSwitch = 0U, /*!< Automatic clock switch from internal oscillator to external clock. */ + kDCDC_ClockInternalOsc, /* Use internal oscillator. */ + kDCDC_ClockExternalOsc, /* Use external 32M crystal oscillator. */ +} dcdc_clock_source_t; + +/*! + * @brief Configuration for the low power. + */ +typedef struct _dcdc_low_power_config +{ + dcdc_work_mode_t workModeInVLPRW; /*!< Select the behavior of DCDC in device VLPR and VLPW low power modes. */ + dcdc_work_mode_t workModeInVLPS; /*!< Select the behavior of DCDC in device VLPS low power modes. */ + bool enableHysteresisVoltageSense; /*!< Enable hysteresis in low power voltage sense. */ + bool enableAdjustHystereticValueSense; /*!< Adjust hysteretic value in low power voltage sense. */ + bool enableHystersisComparator; /*!< Enable hysteresis in low power comparator. */ + bool enableAdjustHystereticValueComparator; /*!< Adjust hysteretic value in low power comparator. */ + dcdc_hysteretic_threshold_offset_value_t hystereticUpperThresholdValue; /*!< Configure the hysteretic upper + threshold value in low power mode. */ + dcdc_hysteretic_threshold_offset_value_t hystereticLowerThresholdValue; /*!< Configure the hysteretic lower + threshold value in low power mode. */ + bool enableDiffComparators; /*!< Enable low power differential comparators, to sense lower supply in pulsed mode. */ +} dcdc_low_power_config_t; + +/*! + * @brief Configuration for the loop control. + */ +typedef struct _dcdc_loop_control_config +{ + bool enableDiffHysteresis; /*!< Enable hysteresis in switching converter differential mode analog comparators. This + feature improves transient supply ripple and efficiency. */ + bool enableCommonHysteresis; /*!< Enable hysteresis in switching converter common mode analog comparators. This + feature improves transient supply ripple and efficiency. */ + bool enableDiffHysteresisThresh; /*!< This field act the same rule as enableDiffHysteresis. However, if this field + is enabled along with the enableDiffHysteresis, the Hysteresis wuold be + doubled. */ + bool enableCommonHysteresisThresh; /*!< This field act the same rule as enableCommonHysteresis. However, if this + field is enabled along with the enableCommonHysteresis, the Hysteresis wuold + be doubled. */ + bool enableInvertHysteresisSign; /*!< Invert the sign of the hysteresis in DC-DC analog comparators. */ +} dcdc_loop_control_config_t; + +/*! + * @brief Configuration for min power setting. + */ +typedef struct _dcdc_min_power_config +{ + /* For Continuous Mode. */ + bool enableUseHalfFetForContinuous; /*!< Use half switch FET for the continuous mode. */ + bool enableUseDoubleFetForContinuous; /*!< Use double switch FET for the continuous mode. */ + bool enableUseHalfFreqForContinuous; /*!< Set DCDC clock to half frequency for the continuous mode. */ + + /* For Pulsed Mode. */ + bool enableUseHalfFetForPulsed; /*!< Use half switch FET for the Pulsed mode. */ + bool enableUseDoubleFetForPulsed; /*!< Use double switch FET for the Pulsed mode. */ + bool enableUseHalfFreqForPulsed; /*!< Set DCDC clock to half frequency for the Pulsed mode. */ +} dcdc_min_power_config_t; + +/*! + * @brief Configuration for the integrator in pulsed mode. + */ +typedef struct _dcdc_pulsed_integrator_config_t +{ + bool enableUseUserIntegratorValue; /*!< Enable to use the setting value in userIntegratorValue field. Otherwise, the + predefined hardware setting would be applied internally. */ + uint32_t userIntegratorValue; /*!< User defined integrator value. The available value is 19-bit. */ + bool enablePulseRunSpeedup; /*!< Enable pulse run speedup. */ +} dcdc_pulsed_integrator_config_t; + +#if defined(__cplusplus) +extern "C" { +#endif + +/******************************************************************************* + * API + ******************************************************************************/ + +/*! + * @name Initialization and deinitialization + * @{ + */ + +/*! + * @brief Enable the access to DCDC registers. + * + * @param base DCDC peripheral base address. + */ +void DCDC_Init(DCDC_Type *base); + +/*! + * @brief Disable the access to DCDC registers. + * + * @param base DCDC peripheral base address. + */ +void DCDC_Deinit(DCDC_Type *base); + +/* @} */ + +/*! + * @name Status + * @{ + */ + +/*! + * @brief Get status flags. + * + * @brief base DCDC peripheral base address. + * @return Masks of asserted status flags. See to "_dcdc_status_flags_t". + */ +uint32_t DCDC_GetStatusFlags(DCDC_Type *base); + +/*! + * @brief Clear status flags. + * + * @brief base DCDC peripheral base address. + * @brief mask Mask of status values that would be cleared. See to "_dcdc_status_flags_t". + */ +void DCDC_ClearStatusFlags(DCDC_Type *base, uint32_t mask); + +/* @} */ + +/*! + * @name Interrupts + * @{ + */ + +/*! + * @brief Enable interrupts. + * + * @param base DCDC peripheral base address. + * @param mask Mask of interrupt events that would be enabled. See to "_dcdc_interrupt_enable_t". + */ +static inline void DCDC_EnableInterrupts(DCDC_Type *base, uint32_t mask) +{ + assert(0U == (mask & ~DCDC_REG6_PSWITCH_INT_MUTE_MASK)); /* Only the PSWITCH interrupt is supported. */ + + /* By default, the PSWITCH is enabled. */ + base->REG6 &= ~mask; +} + +/*! + * @brief Disable interrupts. + * + * @param base DCDC peripheral base address. + * @param mask Mask of interrupt events that would be disabled. See to "_dcdc_interrupt_enable_t". + */ +static inline void DCDC_DisableInterrupts(DCDC_Type *base, uint32_t mask) +{ + assert(0U == (mask & ~DCDC_REG6_PSWITCH_INT_MUTE_MASK)); /* Only the pswitch interrupt is supported. */ + + base->REG6 |= mask; +} + +/*! + * @brief Configure the PSWITCH interrupts. + * + * There are PSWITCH interrupt events can be triggered by falling edge or rising edge. So user can set the interrupt + * events that would be triggered with this function. Un-asserted events would be disabled. The interrupt of PSwitch + * should be enabled as well if to sense the PSWTICH event. + * By default, no interrupt events would be enabled. + * + * @param base DCDC peripheral base address. + * @param mask Mask of interrupt events for PSwtich. See to "_dcdc_pswitch_detect_event_t". + */ +void DCDC_SetPSwitchInterruptConfig(DCDC_Type *base, uint32_t mask); + +/* @} */ + +/*! + * @name Misc control. + * @{ + */ +/*! + * @brief Get the default setting for low power configuration. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * @code + * config->workModeInVLPRW = kDCDC_WorkInPulsedMode; + * config->workModeInVLPS = kDCDC_WorkInPulsedMode; + * config->enableHysteresisVoltageSense = true; + * config->enableAdjustHystereticValueSense = false; + * config->enableHystersisComparator = true; + * config->enableAdjustHystereticValueComparator = false; + * config->hystereticUpperThresholdValue = kDCDC_HystereticThresholdOffset75mV; + * config->hystereticLowerThresholdValue = kDCDC_HystereticThresholdOffset0mV; + * config->enableDiffComparators = false; + * @endcode + * + * @param config Pointer to configuration structure. See to "dcdc_low_power_config_t". + */ +void DCDC_GetDefaultLowPowerConfig(dcdc_low_power_config_t *config); + +/*! + * @brief Configure the low power for DCDC. + * + * @param base DCDC peripheral base address. + * @param config Pointer to configuration structure. See to "dcdc_low_power_config_t". + */ +void DCDC_SetLowPowerConfig(DCDC_Type *base, const dcdc_low_power_config_t *config); + +/*! + * @brief Get the default setting for loop control configuration. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * @code + * config->enableDiffHysteresis = false; + * config->enableCommonHysteresis = false; + * config->enableDiffHysteresisThresh = false; + * config->enableCommonHysteresisThresh = false; + * config->enableInvertHysteresisSign = false; + * @endcode + * + * @param config Pointer to configuration structure. See to "dcdc_loop_control_config_t". + */ +void DCDC_GetDefaultLoopControlConfig(dcdc_loop_control_config_t *config); + +/*! + * @brief Configure the loop control for DCDC. + * + * @param base DCDC peripheral base address. + * @param config Pointer to configuration structure. See to "dcdc_loop_control_config_t". + */ +void DCDC_SetLoopControlConfig(DCDC_Type *base, const dcdc_loop_control_config_t *config); + +/*! + * @brief Enable the XTAL OK detection circuit. + * + * The XTAL OK detection circuit is enabled by default. + * + * @param base DCDC peripheral base address. + * @param enable Enable the feature or not. + */ +static inline void DCDC_EnableXtalOKDetectionCircuit(DCDC_Type *base, bool enable) +{ + if (enable) + { + base->REG0 &= ~DCDC_REG0_DCDC_XTALOK_DISABLE_MASK; + } + else + { + base->REG0 |= DCDC_REG0_DCDC_XTALOK_DISABLE_MASK; + } +} + +/*! + * @brief Enable the output range comparator. + * + * The output range comparator is enabled by default. + * + * @param base DCDC peripheral base address. + * @param enable Enable the feature or not. + */ +static inline void DCDC_EnableOutputRangeComparator(DCDC_Type *base, bool enable) +{ + if (enable) + { + base->REG0 &= ~DCDC_REG0_PWD_CMP_OFFSET_MASK; + } + else + { + base->REG0 |= DCDC_REG0_PWD_CMP_OFFSET_MASK; + } +} + +/*! + * @brief Enable to reduce the DCDC current. + * + * To enable this feature will save approximately 20 µA in RUN mode. This feature is disabled by default. + * + * @param base DCDC peripheral base address. + * @param enable Enable the feature or not. + */ +static inline void DCDC_EnableReduceCurrent(DCDC_Type *base, bool enable) +{ + if (enable) + { + base->REG0 |= DCDC_REG0_DCDC_LESS_I_MASK; + } + else + { + base->REG0 &= ~DCDC_REG0_DCDC_LESS_I_MASK; + } +} + +/*! + * @brief Set the clock source for DCDC. + * + * This function is to set the clock source for DCDC. By default, DCDC can switch the clock from internal oscillator to + * external clock automatically. Once the application choose to use the external clock with function, the internal + * oscillator would be powered down. However, the internal oscillator could be powered down only when 32MHz crystal + * oscillator is available. + * + * @param base DCDC peripheral base address. + * @param clockSource Clock source for DCDC. See to "dcdc_clock_source_t". + */ +void DCDC_SetClockSource(DCDC_Type *base, dcdc_clock_source_t clockSource); + +/*! + * @brief Set the battery voltage divider for ADC sample. + * + * This function controls VBAT voltage divider. The divided VBAT output is input to an ADC channel which allows the + * battery voltage to be measured. + * + * @param base DCDC peripheral base address. + * @param divider Setting divider selection. See to "dcdc_vbat_divider_t" + */ +static inline void DCDC_SetBatteryVoltageDivider(DCDC_Type *base, dcdc_vbat_divider_t divider) +{ + base->REG0 = (base->REG0 & ~DCDC_REG0_DCDC_VBAT_DIV_CTRL_MASK) | DCDC_REG0_DCDC_VBAT_DIV_CTRL(divider); +} + +/*! + * @brief Set battery monitor value. + * + * This function is to set the battery monitor value. If the feature of monitoring battery voltage is enabled (with + * non-zero value set), user should set the battery voltage measured with an 8 mV LSB resolution from the ADC sample + * channel. It would improve efficiency and minimize ripple. + * + * @param base DCDC peripheral base address. + * @param battValue Battery voltage measured with an 8 mV LSB resolution with 10-bit ADC sample. Setting 0x0 would + * disable feature of monitoring battery voltage. + */ +void DCDC_SetBatteryMonitorValue(DCDC_Type *base, uint32_t battValue); + +/*! + * @brief Software shutdown the DCDC module to stop the power supply for chip. + * + * This function is to shutdown the DCDC module and stop the power supply for chip. In case the chip is powered by DCDC, + * which means the DCDC is working as Buck/Boost mode, to shutdown the DCDC would cause the chip to reset! Then, the + * DCDC_REG4_DCDC_SW_SHUTDOWN bit would be cleared automatically during power up sequence. If the DCDC is in bypass + * mode, which depends on the board's hardware connection, to shutdown the DCDC would not be meaningful. + * + * @param base DCDC peripheral base address. + */ +static inline void DCDC_DoSoftShutdown(DCDC_Type *base) +{ + base->REG4 = DCDC_REG4_UNLOCK(0x3E77) | DCDC_REG4_DCDC_SW_SHUTDOWN_MASK; + /* The unlock key must be set while set the shutdown command. */ +} + +/*! + * @brief Set upper limit duty cycle limit in DCDC converter in Boost mode. + * + * @param base DCDC peripheral base address. + * @param value Setting value for limit duty cycle. Available range is 0-127. + */ +static inline void DCDC_SetUpperLimitDutyCycleBoost(DCDC_Type *base, uint32_t value) +{ + base->REG1 = (~DCDC_REG1_POSLIMIT_BOOST_IN_MASK & base->REG1) | DCDC_REG1_POSLIMIT_BOOST_IN(value); +} + +/*! + * @brief Set upper limit duty cycle limit in DCDC converter in Buck mode. + * + * @param base DCDC peripheral base address. + * @param value Setting value for limit duty cycle. Available range is 0-127. + */ +static inline void DCDC_SetUpperLimitDutyCycleBuck(DCDC_Type *base, uint32_t value) +{ + base->REG1 = (~DCDC_REG1_POSLIMIT_BUCK_IN_MASK & base->REG1) | DCDC_REG1_POSLIMIT_BUCK_IN(value); +} + +/*! + * @brief Adjust value of duty cycle when switching between VDD1P45 and VDD1P8. + * + * Adjust value of duty cycle when switching between VDD1P45 and VDD1P8. The unit is 1/32 or 3.125%. + * + * @param base DCDC peripheral base address. + * @param value Setting adjust value. The available range is 0-15. The unit is 1/32 or 3.125&. + */ +static inline void DCDC_AdjustDutyCycleSwitchingTargetOutput(DCDC_Type *base, uint32_t value) +{ + base->REG3 = (~DCDC_REG3_DCDC_VDD1P5CTRL_ADJTN_MASK & base->REG3) | DCDC_REG3_DCDC_VDD1P5CTRL_ADJTN(value); +} + +/*! + * @brief Lock the setting of target voltage. + * + * This function is to lock the setting of target voltage. This function should be called before entering the low power + * modes to lock the target voltage. + * + * @param base DCDC peripheral base address. + */ +static inline void DCDC_LockTargetVoltage(DCDC_Type *base) +{ + base->REG3 |= (DCDC_REG3_DCDC_VDD1P8CTRL_DISABLE_STEP_MASK | DCDC_REG3_DCDC_VDD1P5CTRL_DISABLE_STEP_MASK); +} + +/*! + * @brief Adjust the target voltage of DCDC output. + * + * This function is to adjust the target voltage of DCDC output. It would unlock the setting of target voltages, change + * them and finally wait until the output is stabled. + * + * @param base DCDC peripheral base address. + * @param vdd1p45Boost Target value of VDD1P45 in boost mode, 25 mV each step from 0x00 to 0x0F. 0x00 is for 1.275V. + * @param vdd1p45Buck Target value of VDD1P45 in buck mode, 25 mV each step from 0x00 to 0x0F. 0x00 is for 1.275V. + * @param vdd1p8 Target value of VDD1P8, 25 mV each step in two ranges, from 0x00 to 0x11 and 0x20 to 0x3F. + * 0x00 is for 1.65V, 0x20 is for 2.8V. + */ +void DCDC_AdjustTargetVoltage(DCDC_Type *base, uint32_t vdd1p45Boost, uint32_t vdd1p45Buck, uint32_t vdd1p8); + +/*! + * @brief Get the default configuration for min power. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * @code + * config->enableUseHalfFetForContinuous = false; + * config->enableUseDoubleFetForContinuous = false; + * config->enableUseHalfFreqForContinuous = false; + * config->enableUseHalfFetForPulsed = false; + * config->enableUseDoubleFetForPulsed = false; + * config->enableUseHalfFreqForPulsed = false; + * @endcode + * + * @param config Pointer to configuration structure. See to "dcdc_min_power_config_t". + */ +void DCDC_GetDefaultMinPowerDefault(dcdc_min_power_config_t *config); + +/*! + * @brief Configure for the min power. + * + * @param base DCDC peripheral base address. + * @param config Pointer to configuration structure. See to "dcdc_min_power_config_t". + */ +void DCDC_SetMinPowerConfig(DCDC_Type *base, const dcdc_min_power_config_t *config); + +/*! + * @brief Get the default setting for integrator configuration in pulsed mode. + * + * The default configuration are set according to responding registers' setting when powered on. + * They are: + * @code + * config->enableUseUserIntegratorValue = false; + * config->userIntegratorValue = 0U; + * config->enablePulseRunSpeedup = false; + * @endcode + * + * @param config Pointer to configuration structure. See to "dcdc_pulsed_integrator_config_t". + */ +void DCDC_GetDefaultPulsedIntegratorConfig(dcdc_pulsed_integrator_config_t *config); + +/*! + * @brief Configure the integrator in pulsed mode. + * + * @param base DCDC peripheral base address. + * @config Pointer to configuration structure. See to "dcdc_pulsed_integrator_config_t". + */ +void DCDC_SetPulsedIntegratorConfig(DCDC_Type *base, const dcdc_pulsed_integrator_config_t *config); + +/* @} */ + +#if defined(__cplusplus) +} +#endif +/*! + * @} + */ +#endif /* _FSL_DCDC_H_ */