mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_H743ZI/TOOLCHAIN_ARM_MICRO/stm32h7xx_ll_fmc.h
- Revision:
- 172:65be27845400
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_H743ZI/TOOLCHAIN_ARM_MICRO/stm32h7xx_ll_fmc.h Wed Feb 20 20:53:29 2019 +0000
@@ -0,0 +1,1162 @@
+/**
+ ******************************************************************************
+ * @file stm32h7xx_ll_fmc.h
+ * @author MCD Application Team
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_LL_FMC_H
+#define STM32H7xx_LL_FMC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC_LL
+ * @{
+ */
+
+/** @addtogroup FMC_LL_Private_Macros
+ * @{
+ */
+
+#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \
+ ((__BANK__) == FMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FMC_NORSRAM_BANK4))
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_128) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_256) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_512) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_1024))
+#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \
+ ((__FIFO__) == FMC_WRITE_FIFO_ENABLE))
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
+#define IS_FMC_NBL_SETUPTIME(__NBL__) (((__NBL__) == FMC_NBL_SETUPTIME_0) || \
+ ((__NBL__) == FMC_NBL_SETUPTIME_1) || \
+ ((__NBL__) == FMC_NBL_SETUPTIME_2) || \
+ ((__NBL__) == FMC_NBL_SETUPTIME_3))
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1U) && ((__LATENCY__) <= 17U))
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15U)
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 15U))
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 255U))
+#define IS_FMC_DATAHOLD_DURATION(__DATAHOLD__) ((__DATAHOLD__) <= 3U)
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15U)
+#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1U) && ((__DIV__) <= 16U))
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+
+
+#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3)
+#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_WAIT_FEATURE_DISABLE) || \
+ ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE))
+#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16))
+#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \
+ ((__STATE__) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255U)
+#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255U)
+#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 254U)
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+
+
+#define IS_FMC_SDMEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3))
+#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((__RBURST__) == FMC_SDRAM_RBURST_ENABLE))
+#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2))
+#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_PALL) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U))
+#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U))
+#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U))
+#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U))
+#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0U) && ((__TIME__) <= 16U))
+#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U))
+#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0U) && ((__DELAY__) <= 16U))
+#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0U) && ((__NUMBER__) <= 15U))
+#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191U)
+#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191U)
+#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE)
+#define IS_FMC_SDRAM_BANK(__BANK__) (((__BANK__) == FMC_SDRAM_BANK1) || \
+ ((__BANK__) == FMC_SDRAM_BANK2))
+#define IS_FMC_COLUMNBITS_NUMBER(__COLUMN__) (((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((__COLUMN__) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+#define IS_FMC_ROWBITS_NUMBER(__ROW__) (((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((__ROW__) == FMC_SDRAM_ROW_BITS_NUM_13))
+#define IS_FMC_INTERNALBANK_NUMBER(__NUMBER__) (((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((__NUMBER__) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+#define IS_FMC_CAS_LATENCY(__LATENCY__) (((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((__LATENCY__) == FMC_SDRAM_CAS_LATENCY_3))
+
+
+/**
+ * @}
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup FMC_LL_Exported_typedef FMC Low Layer Exported Types
+ * @{
+ */
+
+#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef FMC_Bank3_TypeDef
+#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+#define FMC_NORSRAM_DEVICE FMC_Bank1_R
+#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E_R
+#define FMC_NAND_DEVICE FMC_Bank3_R
+#define FMC_SDRAM_DEVICE FMC_Bank5_6_R
+
+/**
+ * @brief FMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC NAND Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 254 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 254 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
+ * @{
+ */
+
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002U)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004U)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000U)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000U)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004U)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040U)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000U)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000U)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+ * @{
+ */
+#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000U)
+#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCRx_CPSIZE_0)
+#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCRx_CPSIZE_1)
+#define FMC_PAGE_SIZE_512 ((uint32_t)(FMC_BCRx_CPSIZE_0 | FMC_BCRx_CPSIZE_1))
+#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCRx_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000U)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+ * @{
+ */
+#define FMC_WRITE_FIFO_DISABLE ((uint32_t)FMC_BCR1_WFDIS)
+#define FMC_WRITE_FIFO_ENABLE ((uint32_t)0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000U)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000U)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000U)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Byte_Lane FMC Byte Lane(NBL) Setup
+ * @{
+ */
+#define FMC_NBL_SETUPTIME_0 ((uint32_t)0x00000000U)
+#define FMC_NBL_SETUPTIME_1 ((uint32_t)0x00400000U)
+#define FMC_NBL_SETUPTIME_2 ((uint32_t)0x00800000U)
+#define FMC_NBL_SETUPTIME_3 ((uint32_t)0x00C00000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller
+ * @{
+ */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+ * @{
+ */
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+ * @{
+ */
+#define FMC_NAND_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+ * @{
+ */
+#define FMC_NAND_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_NAND_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC FMC ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000U)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000U)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000U)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000U)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000U)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller
+ * @{
+ */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002U)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004U)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010U)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080U)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100U)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800U)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000U)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000U)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001U)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002U)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003U)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004U)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005U)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000U)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008U)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010U)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020U)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000U)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001U)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002U)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004U)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040U)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC_LL Private Macros
+ * @{
+ */
+ /**
+ * @brief Enable the FMC Peripheral.
+ * @retval None
+ */
+#define __FMC_ENABLE() (FMC_Bank1_R->BTCR[0] |= FMC_BCR1_FMCEN)
+
+/**
+ * @brief Disable the FMC Peripheral.
+ * @retval None
+ */
+#define __FMC_DISABLE() (FMC_Bank1_R->BTCR[0] &= ~FMC_BCR1_FMCEN)
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__ FMC_NORSRAM Instance
+ * @param __BANK__ FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCRx_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__ FMC_NORSRAM Instance
+ * @param __BANK__ FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCRx_MBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__ FMC_NAND Instance
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__ FMC_NAND Instance
+ * @param __BANK__ FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Interrupt FMC NAND Interrupt
+ * @brief macros to handle NAND interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__ FMC_NAND instance
+ * @param __INTERRUPT__ FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__ FMC_NAND Instance
+ * @param __INTERRUPT__ FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__ FMC_NAND Instance
+ * @param __BANK__ FMC_NAND Bank
+ * @param __FLAG__ FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__ FMC_NAND Instance
+ * @param __FLAG__ FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__))
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Interrupt FMC SDRAM Interrupt
+ * @brief macros to handle SDRAM interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__ FMC_SDRAM instance
+ * @param __INTERRUPT__ FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__ FMC_SDRAM instance
+ * @param __INTERRUPT__ FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__ FMC_SDRAM instance
+ * @param __FLAG__ FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__ FMC_SDRAM instance
+ * @param __FLAG__ FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+ * @{
+ */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
