The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_UBRIDGE/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_flexbus.h
- Revision:
- 145:64910690c574
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_UBRIDGE/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K82F/drivers/fsl_flexbus.h Wed Jun 21 17:31:38 2017 +0100 @@ -0,0 +1,265 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_FLEXBUS_H_ +#define _FSL_FLEXBUS_H_ + +#include "fsl_common.h" + +/*! + * @addtogroup flexbus + * @{ + */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +#define FSL_FLEXBUS_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) /*!< Version 2.0.1. */ +/*@}*/ + +/*! + * @brief Defines port size for FlexBus peripheral. + */ +typedef enum _flexbus_port_size +{ + kFLEXBUS_4Bytes = 0x00U, /*!< 32-bit port size */ + kFLEXBUS_1Byte = 0x01U, /*!< 8-bit port size */ + kFLEXBUS_2Bytes = 0x02U /*!< 16-bit port size */ +} flexbus_port_size_t; + +/*! + * @brief Defines number of cycles to hold address and attributes for FlexBus peripheral. + */ +typedef enum _flexbus_write_address_hold +{ + kFLEXBUS_Hold1Cycle = 0x00U, /*!< Hold address and attributes one cycles after FB_CSn negates on writes */ + kFLEXBUS_Hold2Cycles = 0x01U, /*!< Hold address and attributes two cycles after FB_CSn negates on writes */ + kFLEXBUS_Hold3Cycles = 0x02U, /*!< Hold address and attributes three cycles after FB_CSn negates on writes */ + kFLEXBUS_Hold4Cycles = 0x03U /*!< Hold address and attributes four cycles after FB_CSn negates on writes */ +} flexbus_write_address_hold_t; + +/*! + * @brief Defines number of cycles to hold address and attributes for FlexBus peripheral. + */ +typedef enum _flexbus_read_address_hold +{ + kFLEXBUS_Hold1Or0Cycles = 0x00U, /*!< Hold address and attributes 1 or 0 cycles on reads */ + kFLEXBUS_Hold2Or1Cycles = 0x01U, /*!< Hold address and attributes 2 or 1 cycles on reads */ + kFLEXBUS_Hold3Or2Cycle = 0x02U, /*!< Hold address and attributes 3 or 2 cycles on reads */ + kFLEXBUS_Hold4Or3Cycle = 0x03U /*!< Hold address and attributes 4 or 3 cycles on reads */ +} flexbus_read_address_hold_t; + +/*! + * @brief Address setup for FlexBus peripheral. + */ +typedef enum _flexbus_address_setup +{ + kFLEXBUS_FirstRisingEdge = 0x00U, /*!< Assert FB_CSn on first rising clock edge after address is asserted */ + kFLEXBUS_SecondRisingEdge = 0x01U, /*!< Assert FB_CSn on second rising clock edge after address is asserted */ + kFLEXBUS_ThirdRisingEdge = 0x02U, /*!< Assert FB_CSn on third rising clock edge after address is asserted */ + kFLEXBUS_FourthRisingEdge = 0x03U, /*!< Assert FB_CSn on fourth rising clock edge after address is asserted */ +} flexbus_address_setup_t; + +/*! + * @brief Defines byte-lane shift for FlexBus peripheral. + */ +typedef enum _flexbus_bytelane_shift +{ + kFLEXBUS_NotShifted = 0x00U, /*!< Not shifted. Data is left-justified on FB_AD */ + kFLEXBUS_Shifted = 0x01U, /*!< Shifted. Data is right justified on FB_AD */ +} flexbus_bytelane_shift_t; + +/*! + * @brief Defines multiplex group1 valid signals. + */ +typedef enum _flexbus_multiplex_group1_signal +{ + kFLEXBUS_MultiplexGroup1_FB_ALE = 0x00U, /*!< FB_ALE */ + kFLEXBUS_MultiplexGroup1_FB_CS1 = 0x01U, /*!< FB_CS1 */ + kFLEXBUS_MultiplexGroup1_FB_TS = 0x02U, /*!< FB_TS */ +} flexbus_multiplex_group1_t; + +/*! + * @brief Defines multiplex group2 valid signals. + */ +typedef enum _flexbus_multiplex_group2_signal +{ + kFLEXBUS_MultiplexGroup2_FB_CS4 = 0x00U, /*!< FB_CS4 */ + kFLEXBUS_MultiplexGroup2_FB_TSIZ0 = 0x01U, /*!< FB_TSIZ0 */ + kFLEXBUS_MultiplexGroup2_FB_BE_31_24 = 0x02U, /*!< FB_BE_31_24 */ +} flexbus_multiplex_group2_t; + +/*! + * @brief Defines multiplex group3 valid signals. + */ +typedef enum _flexbus_multiplex_group3_signal +{ + kFLEXBUS_MultiplexGroup3_FB_CS5 = 0x00U, /*!< FB_CS5 */ + kFLEXBUS_MultiplexGroup3_FB_TSIZ1 = 0x01U, /*!< FB_TSIZ1 */ + kFLEXBUS_MultiplexGroup3_FB_BE_23_16 = 0x02U, /*!< FB_BE_23_16 */ +} flexbus_multiplex_group3_t; + +/*! + * @brief Defines multiplex group4 valid signals. + */ +typedef enum _flexbus_multiplex_group4_signal +{ + kFLEXBUS_MultiplexGroup4_FB_TBST = 0x00U, /*!< FB_TBST */ + kFLEXBUS_MultiplexGroup4_FB_CS2 = 0x01U, /*!< FB_CS2 */ + kFLEXBUS_MultiplexGroup4_FB_BE_15_8 = 0x02U, /*!< FB_BE_15_8 */ +} flexbus_multiplex_group4_t; + +/*! + * @brief Defines multiplex group5 valid signals. + */ +typedef enum _flexbus_multiplex_group5_signal +{ + kFLEXBUS_MultiplexGroup5_FB_TA = 0x00U, /*!< FB_TA */ + kFLEXBUS_MultiplexGroup5_FB_CS3 = 0x01U, /*!< FB_CS3 */ + kFLEXBUS_MultiplexGroup5_FB_BE_7_0 = 0x02U, /*!< FB_BE_7_0 */ +} flexbus_multiplex_group5_t; + +/*! + * @brief Configuration structure that the user needs to set. + */ +typedef struct _flexbus_config +{ + uint8_t chip; /*!< Chip FlexBus for validation */ + uint8_t waitStates; /*!< Value of wait states */ + uint32_t chipBaseAddress; /*!< Chip base address for using FlexBus */ + uint32_t chipBaseAddressMask; /*!< Chip base address mask */ + bool writeProtect; /*!< Write protected */ + bool burstWrite; /*!< Burst-Write enable */ + bool burstRead; /*!< Burst-Read enable */ + bool byteEnableMode; /*!< Byte-enable mode support */ + bool autoAcknowledge; /*!< Auto acknowledge setting */ + bool extendTransferAddress; /*!< Extend transfer start/extend address latch enable */ + bool secondaryWaitStates; /*!< Secondary wait states number */ + flexbus_port_size_t portSize; /*!< Port size of transfer */ + flexbus_bytelane_shift_t byteLaneShift; /*!< Byte-lane shift enable */ + flexbus_write_address_hold_t writeAddressHold; /*!< Write address hold or deselect option */ + flexbus_read_address_hold_t readAddressHold; /*!< Read address hold or deselect option */ + flexbus_address_setup_t addressSetup; /*!< Address setup setting */ + flexbus_multiplex_group1_t group1MultiplexControl; /*!< FlexBus Signal Group 1 Multiplex control */ + flexbus_multiplex_group2_t group2MultiplexControl; /*!< FlexBus Signal Group 2 Multiplex control */ + flexbus_multiplex_group3_t group3MultiplexControl; /*!< FlexBus Signal Group 3 Multiplex control */ + flexbus_multiplex_group4_t group4MultiplexControl; /*!< FlexBus Signal Group 4 Multiplex control */ + flexbus_multiplex_group5_t group5MultiplexControl; /*!< FlexBus Signal Group 5 Multiplex control */ +} flexbus_config_t; + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus */ + +/*! + * @name FlexBus functional operation + * @{ + */ + +/*! + * @brief Initializes and configures the FlexBus module. + * + * This function enables the clock gate for FlexBus module. + * Only chip 0 is validated and set to known values. Other chips are disabled. + * Note that in this function, certain parameters, depending on external memories, must + * be set before using the FLEXBUS_Init() function. + * This example shows how to set up the uart_state_t and the + * flexbus_config_t parameters and how to call the FLEXBUS_Init function by passing + * in these parameters. + @code + flexbus_config_t flexbusConfig; + FLEXBUS_GetDefaultConfig(&flexbusConfig); + flexbusConfig.waitStates = 2U; + flexbusConfig.chipBaseAddress = 0x60000000U; + flexbusConfig.chipBaseAddressMask = 7U; + FLEXBUS_Init(FB, &flexbusConfig); + @endcode + * + * @param base FlexBus peripheral address. + * @param config Pointer to the configuration structure +*/ +void FLEXBUS_Init(FB_Type *base, const flexbus_config_t *config); + +/*! + * @brief De-initializes a FlexBus instance. + * + * This function disables the clock gate of the FlexBus module clock. + * + * @param base FlexBus peripheral address. + */ +void FLEXBUS_Deinit(FB_Type *base); + +/*! + * @brief Initializes the FlexBus configuration structure. + * + * This function initializes the FlexBus configuration structure to default value. The default + * values are. + @code + fbConfig->chip = 0; + fbConfig->writeProtect = 0; + fbConfig->burstWrite = 0; + fbConfig->burstRead = 0; + fbConfig->byteEnableMode = 0; + fbConfig->autoAcknowledge = true; + fbConfig->extendTransferAddress = 0; + fbConfig->secondaryWaitStates = 0; + fbConfig->byteLaneShift = kFLEXBUS_NotShifted; + fbConfig->writeAddressHold = kFLEXBUS_Hold1Cycle; + fbConfig->readAddressHold = kFLEXBUS_Hold1Or0Cycles; + fbConfig->addressSetup = kFLEXBUS_FirstRisingEdge; + fbConfig->portSize = kFLEXBUS_1Byte; + fbConfig->group1MultiplexControl = kFLEXBUS_MultiplexGroup1_FB_ALE; + fbConfig->group2MultiplexControl = kFLEXBUS_MultiplexGroup2_FB_CS4 ; + fbConfig->group3MultiplexControl = kFLEXBUS_MultiplexGroup3_FB_CS5; + fbConfig->group4MultiplexControl = kFLEXBUS_MultiplexGroup4_FB_TBST; + fbConfig->group5MultiplexControl = kFLEXBUS_MultiplexGroup5_FB_TA; + @endcode + * @param config Pointer to the initialization structure. + * @see FLEXBUS_Init + */ +void FLEXBUS_GetDefaultConfig(flexbus_config_t *config); + +/*! @}*/ + +#if defined(__cplusplus) +} +#endif /* __cplusplus */ + +/*! @}*/ + +#endif /* _FSL_FLEXBUS_H_ */