Diff: TARGET_WIZWIKI_W7500P/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

Parent:

108:34e6b704fe68

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZWIKI_W7500P/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,230 @@
+/* mbed Microcontroller Library 
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+ 
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+// See W7500x_hal_gpio.h for values of MODE, PUPD and AFNUM
+#define WIZ_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((MODE) << 8) | ((PUPD) << 4) | ((AFNUM) << 0)))
+#define WIZ_PIN_PUPD(X)       (((X) >> 4) & 0x0F)
+#define WIZ_PIN_AFNUM(X)      (((X) >> 0) & 0x0F)
+#define WIZ_PIN_MODE(X)       (((X) >> 8) & 0x0F)
+#define WIZ_MODE_INPUT              (0)
+#define WIZ_MODE_OUTPUT             (1)
+#define WIZ_MODE_AF                 (2)
+
+#define WIZ_GPIO_NOPULL             (0)   /*!< No Pull-up or Pull-down activation  */
+#define WIZ_GPIO_PULLDOWN           (1)   /*!< Pull-down activation                */
+#define WIZ_GPIO_PULLUP             (2)   /*!< Pull-up activation                  */
+#define WIZ_GPIO_OPEN_DRAIN         (3)   /*!< Open Drain activation               */
+
+
+#define WIZ_PORT(X) (((uint32_t)(X) >> 4) & 0xF)    // port number (0=A, 1=B, 2=C, 3=D)
+#define WIZ_PIN_NUM(X)  ((uint32_t)(X) & 0xF)    // pin number
+#define WIZ_PIN_INDEX(X)  (1 << ((uint32_t)(X) & 0xF))    // pin index : flag bit 
+
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+
+typedef enum {
+    // W7500x PORT[5:4] + PIN[3:0])
+    PA_0  = 0x000,
+    PA_1  = 0x001,
+    PA_2  = 0x002,
+    PA_3  = 0x003,
+    PA_4  = 0x004,
+    PA_5  = 0x005,
+    PA_6  = 0x006,
+    PA_7  = 0x007,
+    PA_8  = 0x008,
+    PA_9  = 0x009,
+    PA_10 = 0x00A,
+    PA_11 = 0x00B,
+    PA_12 = 0x00C,
+    PA_13 = 0x00D,
+    PA_14 = 0x00E,
+    PA_15 = 0x00F,
+              
+    PB_0  = 0x010, 
+    PB_1  = 0x011, 
+    PB_2  = 0x012, 
+    PB_3  = 0x013, 
+    PB_4  = 0x014,
+    PB_5  = 0x015,
+    PB_6  = 0x016,
+    PB_7  = 0x017,
+    PB_8  = 0x018,
+    PB_9  = 0x019,
+    PB_10 = 0x01A,
+    PB_11 = 0x01B,
+    PB_12 = 0x01C,
+    PB_13 = 0x01D,
+    PB_14 = 0x01E,
+    PB_15 = 0x01F,
+              
+    PC_0  = 0x020,
+    PC_1  = 0x021,
+    PC_2  = 0x022,
+    PC_3  = 0x023,
+    PC_4  = 0x024,
+    PC_5  = 0x025,
+    PC_6  = 0x026,
+    PC_7  = 0x027,
+    PC_8  = 0x028,
+    PC_9  = 0x029,
+              
+    PC_10 = 0x02A,
+    PC_11 = 0x02B,
+    PC_12 = 0x02C,
+    PC_13 = 0x02D,
+    PC_14 = 0x02E,
+    PC_15 = 0x02F,
+              
+    PD_0  = 0x030,
+    PD_1  = 0x031,
+    PD_2  = 0x032,
+    PD_3  = 0x033,
+    PD_4  = 0x034,
+
+    PA_00  = PA_0,
+    PA_01  = PA_1,
+    PA_02  = PA_2,
+    PA_03  = PA_3,
+    PA_04  = PA_4,
+    PA_05  = PA_5,
+    PA_06  = PA_6,
+    PA_07  = PA_7,
+    PA_08  = PA_8,
+    PA_09  = PA_9,
+
+    PB_00  = PB_0,
+    PB_01  = PB_1,
+    PB_02  = PB_2,
+    PB_03  = PB_3,
+    PB_04  = PB_4,
+    PB_05  = PB_5,
+    PB_06  = PB_6,
+    PB_07  = PB_7,
+    PB_08  = PB_8,
+    PB_09  = PB_9,
+
+    PC_00  = PC_0,
+    PC_01  = PC_1,
+    PC_02  = PC_2,
+    PC_03  = PC_3,
+    PC_04  = PC_4,
+    PC_05  = PC_5,
+    PC_06  = PC_6,
+    PC_07  = PC_7,
+    PC_08  = PC_8,
+    PC_09  = PC_9,
+
+    PD_00  = PD_0,
+    PD_01  = PD_1,
+    PD_02  = PD_2,
+    PD_03  = PD_3,
+    PD_04  = PD_4,
+    
+    // Arduino connector namings
+    A0          = PC_15,    // AIN0
+    A1          = PC_14,    // AIN1
+    A2          = PC_13,    // AIN2
+    A3          = PC_12,    // AIN3
+    A4          = PC_9,    // AIN4
+    A5          = PC_8,    // AIN5
+    
+    D0          = PA_14,
+    D1          = PA_13,
+    D2          = PC_3,
+    D3          = PC_2,
+    D4          = PA_2,
+    D5          = PA_1,
+    D6          = PA_0,
+    D7          = PA_12,
+    D8          = PA_11,
+    D9          = PC_1,
+    D10         = PA_5,
+    D11         = PA_8,
+    D12         = PA_7,
+    D13         = PA_6,
+    D14         = PA_10,
+    D15         = PA_9,
+
+    // Generic signals namings
+    LED_RED     = PC_0,
+    LED_GREEN   = PC_4,
+    LED_BLUE    = PC_5,
+
+    LED1        = LED_RED,
+    LED2        = LED_GREEN,
+    LED3        = LED_BLUE,
+    LED4        = LED_BLUE,
+
+    LEDR        = LED_RED,
+    LEDG        = LED_GREEN,
+    LEDB        = LED_BLUE,
+
+    USBTX       = PC_10,
+    USBRX       = PC_11,
+
+    //Use SPI1
+    SD_SEL      = PB_0,         // SPI1_CS
+    SD_CLK      = PB_1,         // SPI1_CLK
+    SD_MISO     = PB_2,         // MOSI1
+    SD_MOSI     = PB_3,         // MISO1
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone  = 0,
+    PullDown  = 1,
+    PullUp    = 2,
+    PullDefault = PullNone
+} PinMode;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif