Diff: TARGET_TY51822R3/TOOLCHAIN_IAR/ble_dtm.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TY51822R3/TOOLCHAIN_IAR/ble_dtm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,168 @@
+/* 
+ * Copyright (c) 2012 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+/** @file
+ *
+ * @defgroup ble_sdk_dtmlib_dtm DTM - Direct Test Mode
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for testing RF/PHY using DTM commands.
+ */
+
+#ifndef BLE_DTM_H__
+#define BLE_DTM_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+
+
+/**@brief Configuration parameters. */
+#define DEFAULT_TX_POWER                RADIO_TXPOWER_TXPOWER_0dBm      /**< Default Transmission power using in the DTM module. */
+#define DEFAULT_TIMER                   NRF_TIMER0                      /**< Default timer used for timing. */
+#define DEFAULT_TIMER_IRQn              TIMER0_IRQn                     /**< IRQ used for timer. NOTE: MUST correspond to DEFAULT_TIMER. */
+
+/**@brief BLE DTM command codes. */
+typedef uint32_t dtm_cmd_t;                                             /**< DTM command type. */
+
+#define LE_RESET                        0                               /**< DTM command: Reset device. */
+#define LE_RECEIVER_TEST                1                               /**< DTM command: Start receive test. */
+#define LE_TRANSMITTER_TEST             2                               /**< DTM command: Start transmission test. */
+#define LE_TEST_END                     3                               /**< DTM command: End test and send packet report. */
+
+// Configuration options used as parameter 2
+// when cmd == LE_TRANSMITTER_TEST and payload == DTM_PKT_VENDORSPECIFIC
+// Configuration value, if any, is supplied in parameter 3
+
+#define CARRIER_TEST                    0                               /**< Length=0 indicates a constant, unmodulated carrier until LE_TEST_END or LE_RESET */
+#define CARRIER_TEST_STUDIO             1                               /**< nRFgo Studio uses value 1 in length field, to indicate a constant, unmodulated carrier until LE_TEST_END or LE_RESET */
+#define SET_TX_POWER                    2                               /**< Set transmission power, value -40..+4 dBm in steps of 4 */
+#define SELECT_TIMER                    3                               /**< Select on of the 16 MHz timers 0, 1 or 2 */
+
+#define LE_PACKET_REPORTING_EVENT       0x8000                          /**< DTM Packet reporting event, returned by the device to the tester. */
+#define LE_TEST_STATUS_EVENT_SUCCESS    0x0000                          /**< DTM Status event, indicating success. */
+#define LE_TEST_STATUS_EVENT_ERROR      0x0001                          /**< DTM Status event, indicating an error. */
+
+#define DTM_PKT_PRBS9                   0x00                            /**< Bit pattern PRBS9. */
+#define DTM_PKT_0X0F                    0x01                            /**< Bit pattern 11110000 (LSB is the leftmost bit). */
+#define DTM_PKT_0X55                    0x02                            /**< Bit pattern 10101010 (LSB is the leftmost bit). */
+#define DTM_PKT_VENDORSPECIFIC          0xFFFFFFFF                      /**< Vendor specific. Nordic: Continuous carrier test, or configuration. */
+
+/**@brief Return codes from dtm_cmd(). */
+#define DTM_SUCCESS                     0x00                            /**< Indicate that the DTM function completed with success. */
+#define DTM_ERROR_ILLEGAL_CHANNEL       0x01                            /**< Physical channel number must be in the range 0..39. */
+#define DTM_ERROR_INVALID_STATE         0x02                            /**< Sequencing error: Command is not valid now. */
+#define DTM_ERROR_ILLEGAL_LENGTH        0x03                            /**< Payload size must be in the range 0..37. */
+#define DTM_ERROR_ILLEGAL_CONFIGURATION 0x04                            /**< Parameter out of range (legal range is function dependent). */
+#define DTM_ERROR_UNINITIALIZED         0x05                            /**< DTM module has not been initialized by the application. */
+
+// Note: DTM_PKT_VENDORSPECIFIC, is not a packet type
+#define PACKET_TYPE_MAX                 DTM_PKT_0X55                    /**< Highest value allowed as DTM Packet type. */
+
+/** @brief BLE DTM event type. */
+typedef uint32_t dtm_event_t;                                           /**< Type for handling DTM event. */
+
+/** @brief BLE DTM frequency type. */
+typedef uint32_t dtm_freq_t;                                            /**< Physical channel, valid range: 0..39. */
+
+/**@brief BLE DTM packet types. */
+typedef uint32_t dtm_pkt_type_t;                                        /**< Type for holding the requested DTM payload type.*/
+
+
+/**@brief Function for initializing or re-initializing DTM module
+ *     
+ * @return DTM_SUCCESS on successful initialization of the DTM module.
+*/
+uint32_t dtm_init(void);
+
+
+/**@brief Function for giving control to dtmlib for handling timer and radio events.
+ *        Will return to caller at 625us intervals or whenever another event than radio occurs
+ *        (such as UART input). Function will put MCU to sleep between events.
+ *
+ * @return      Time counter, incremented every 625 us.
+ */
+uint32_t dtm_wait(void);
+
+
+/**@brief Function for calling when a complete command has been prepared by the Tester.
+ *
+ * @param[in]   cmd       One of the DTM_CMD values (bits 14:15 in the 16-bit UART format).
+ * @param[in]   freq      Phys. channel no - actual frequency = (2402 + freq * 2) MHz (bits 8:13 in
+ *                        the 16-bit UART format).
+ * @param[in]   length    Payload length, 0..37 (bits 2:7 in the 16-bit UART format).
+ * @param[in]   payload   One of the DTM_PKT values (bits 0:1 in the 16-bit UART format).
+ *
+ * @return      DTM_SUCCESS or one of the DTM_ERROR_ values
+ */
+uint32_t dtm_cmd(dtm_cmd_t cmd, dtm_freq_t freq, uint32_t length, dtm_pkt_type_t payload);
+
+
+/**@brief Function for reading the result of a DTM command
+ *
+ * @param[out]  p_dtm_event   Pointer to buffer for 16 bit event code according to DTM standard.
+ * 
+ * @return      true: new event, false: no event since last call, this event has been read earlier
+ */
+bool dtm_event_get(dtm_event_t * p_dtm_event);
+
+
+/**@brief Function for configuring the timer to use.
+ *
+ * @note        Must be called when no DTM test is running. 
+ * 
+ * @param[in]   new_timer   Index (0..2) of timer to be used by the DTM library
+ *
+ * @return      true: success, new timer was selected, false: parameter error 
+ */
+bool dtm_set_timer(uint32_t new_timer); 
+
+
+/**@brief Function for configuring the transmit power.
+ *
+ * @note        Must be called when no DTM test is running.
+ * 
+ * @param[in]   new_tx_power   New output level, +4..-40, in steps of 4.
+ *
+ * @return      true: tx power setting changed, false: parameter error
+ */
+bool dtm_set_txpower(uint32_t new_tx_power);
+
+#endif // BLE_DTM_H__
+
+/** @} */