The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_SDT64B/TOOLCHAIN_ARM_STD/fsl_pmc.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 145:64910690c574
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_SDT64B/TOOLCHAIN_ARM_STD/fsl_pmc.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,421 @@ +/* + * Copyright (c) 2015, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_PMC_H_ +#define _FSL_PMC_H_ + +#include "fsl_common.h" + +/*! @addtogroup pmc */ +/*! @{ */ + + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief PMC driver version */ +#define FSL_PMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */ +/*@}*/ + +#if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV) +/*! + * @brief Low-voltage Detect Voltage Select + */ +typedef enum _pmc_low_volt_detect_volt_select +{ + kPMC_LowVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VLVD = VLVDL )*/ + kPMC_LowVoltDetectHighTrip = 1U /*!< High-trip point selected (VLVD = VLVDH )*/ +} pmc_low_volt_detect_volt_select_t; +#endif + +#if (defined(FSL_FEATURE_PMC_HAS_LVWV) && FSL_FEATURE_PMC_HAS_LVWV) +/*! + * @brief Low-voltage Warning Voltage Select + */ +typedef enum _pmc_low_volt_warning_volt_select +{ + kPMC_LowVoltWarningLowTrip = 0U, /*!< Low-trip point selected (VLVW = VLVW1)*/ + kPMC_LowVoltWarningMid1Trip = 1U, /*!< Mid 1 trip point selected (VLVW = VLVW2)*/ + kPMC_LowVoltWarningMid2Trip = 2U, /*!< Mid 2 trip point selected (VLVW = VLVW3)*/ + kPMC_LowVoltWarningHighTrip = 3U /*!< High-trip point selected (VLVW = VLVW4)*/ +} pmc_low_volt_warning_volt_select_t; +#endif + +#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) +/*! + * @brief High-voltage Detect Voltage Select + */ +typedef enum _pmc_high_volt_detect_volt_select +{ + kPMC_HighVoltDetectLowTrip = 0U, /*!< Low-trip point selected (VHVD = VHVDL )*/ + kPMC_HighVoltDetectHighTrip = 1U /*!< High-trip point selected (VHVD = VHVDH )*/ +} pmc_high_volt_detect_volt_select_t; +#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */ + +#if (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS) +/*! + * @brief Bandgap Buffer Drive Select. + */ +typedef enum _pmc_bandgap_buffer_drive_select +{ + kPMC_BandgapBufferDriveLow = 0U, /*!< Low-drive. */ + kPMC_BandgapBufferDriveHigh = 1U /*!< High-drive. */ +} pmc_bandgap_buffer_drive_select_t; +#endif /* FSL_FEATURE_PMC_HAS_BGBDS */ + +#if (defined(FSL_FEATURE_PMC_HAS_VLPO) && FSL_FEATURE_PMC_HAS_VLPO) +/*! + * @brief VLPx Option + */ +typedef enum _pmc_vlp_freq_option +{ + kPMC_FreqRestrict = 0U, /*!< Frequency is restricted in VLPx mode. */ + kPMC_FreqUnrestrict = 1U /*!< Frequency is unrestricted in VLPx mode. */ +} pmc_vlp_freq_mode_t; +#endif /* FSL_FEATURE_PMC_HAS_VLPO */ + +#if (defined(FSL_FEATURE_PMC_HAS_VERID) && FSL_FEATURE_PMC_HAS_VERID) +/*! + @brief IP version ID definition. + */ +typedef struct _pmc_version_id +{ + uint16_t feature; /*!< Feature Specification Number. */ + uint8_t minor; /*!< Minor version number. */ + uint8_t major; /*!< Major version number. */ +} pmc_version_id_t; +#endif /* FSL_FEATURE_PMC_HAS_VERID */ + +#if (defined(FSL_FEATURE_PMC_HAS_PARAM) && FSL_FEATURE_PMC_HAS_PARAM) +/*! @brief IP parameter definition. */ +typedef struct _pmc_param +{ + bool vlpoEnable; /*!< VLPO enable. */ + bool hvdEnable; /*!< HVD enable. */ +} pmc_param_t; +#endif /* FSL_FEATURE_PMC_HAS_PARAM */ + +/*! + * @brief Low-voltage Detect Configuration Structure + */ +typedef struct _pmc_low_volt_detect_config +{ + bool enableInt; /*!< Enable interrupt when Low-voltage detect*/ + bool enableReset; /*!< Enable system reset when Low-voltage detect*/ +#if (defined(FSL_FEATURE_PMC_HAS_LVDV) && FSL_FEATURE_PMC_HAS_LVDV) + pmc_low_volt_detect_volt_select_t voltSelect; /*!< Low-voltage detect trip point voltage selection*/ +#endif +} pmc_low_volt_detect_config_t; + +/*! + * @brief Low-voltage Warning Configuration Structure + */ +typedef struct _pmc_low_volt_warning_config +{ + bool enableInt; /*!< Enable interrupt when low-voltage warning*/ +#if (defined(FSL_FEATURE_PMC_HAS_LVWV) && FSL_FEATURE_PMC_HAS_LVWV) + pmc_low_volt_warning_volt_select_t voltSelect; /*!< Low-voltage warning trip point voltage selection*/ +#endif +} pmc_low_volt_warning_config_t; + +#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) +/*! + * @brief High-voltage Detect Configuration Structure + */ +typedef struct _pmc_high_volt_detect_config +{ + bool enableInt; /*!< Enable interrupt when high-voltage detect*/ + bool enableReset; /*!< Enable system reset when high-voltage detect*/ + pmc_high_volt_detect_volt_select_t voltSelect; /*!< High-voltage detect trip point voltage selection*/ +} pmc_high_volt_detect_config_t; +#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */ + +#if ((defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE) || \ + (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) || \ + (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS)) +/*! + * @brief Bandgap Buffer configuration. + */ +typedef struct _pmc_bandgap_buffer_config +{ +#if (defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE) + bool enable; /*!< Enable bandgap buffer. */ +#endif +#if (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) + bool enableInLowPowerMode; /*!< Enable bandgap buffer in low-power mode. */ +#endif /* FSL_FEATURE_PMC_HAS_BGEN */ +#if (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS) + pmc_bandgap_buffer_drive_select_t drive; /*!< Bandgap buffer drive select. */ +#endif /* FSL_FEATURE_PMC_HAS_BGBDS */ +} pmc_bandgap_buffer_config_t; +#endif + +/******************************************************************************* + * API + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! @name Power Management Controller Control APIs*/ +/*@{*/ + +#if (defined(FSL_FEATURE_PMC_HAS_VERID) && FSL_FEATURE_PMC_HAS_VERID) +/*! + * @brief Gets the PMC version ID. + * + * This function gets the PMC version ID, including major version number, + * minor version number, and a feature specification number. + * + * @param base PMC peripheral base address. + * @param versionId Pointer to version ID structure. + */ +static inline void PMC_GetVersionId(PMC_Type *base, pmc_version_id_t *versionId) +{ + *((uint32_t *)versionId) = base->VERID; +} +#endif /* FSL_FEATURE_PMC_HAS_VERID */ + +#if (defined(FSL_FEATURE_PMC_HAS_PARAM) && FSL_FEATURE_PMC_HAS_PARAM) +/*! + * @brief Gets the PMC parameter. + * + * This function gets the PMC parameter including the VLPO enable and the HVD enable. + * + * @param base PMC peripheral base address. + * @param param Pointer to PMC param structure. + */ +void PMC_GetParam(PMC_Type *base, pmc_param_t *param); +#endif + +/*! + * @brief Configures the low-voltage detect setting. + * + * This function configures the low-voltage detect setting, including the trip + * point voltage setting, enables or disables the interrupt, enables or disables the system reset. + * + * @param base PMC peripheral base address. + * @param config Low-voltage detect configuration structure. + */ +void PMC_ConfigureLowVoltDetect(PMC_Type *base, const pmc_low_volt_detect_config_t *config); + +/*! + * @brief Gets the Low-voltage Detect Flag status. + * + * This function reads the current LVDF status. If it returns 1, a low-voltage event is detected. + * + * @param base PMC peripheral base address. + * @return Current low-voltage detect flag + * - true: Low-voltage detected + * - false: Low-voltage not detected + */ +static inline bool PMC_GetLowVoltDetectFlag(PMC_Type *base) +{ + return (bool)(base->LVDSC1 & PMC_LVDSC1_LVDF_MASK); +} + +/*! + * @brief Acknowledges clearing the Low-voltage Detect flag. + * + * This function acknowledges the low-voltage detection errors (write 1 to + * clear LVDF). + * + * @param base PMC peripheral base address. + */ +static inline void PMC_ClearLowVoltDetectFlag(PMC_Type *base) +{ + base->LVDSC1 |= PMC_LVDSC1_LVDACK_MASK; +} + +/*! + * @brief Configures the low-voltage warning setting. + * + * This function configures the low-voltage warning setting, including the trip + * point voltage setting and enabling or disabling the interrupt. + * + * @param base PMC peripheral base address. + * @param config Low-voltage warning configuration structure. + */ +void PMC_ConfigureLowVoltWarning(PMC_Type *base, const pmc_low_volt_warning_config_t *config); + +/*! + * @brief Gets the Low-voltage Warning Flag status. + * + * This function polls the current LVWF status. When 1 is returned, it + * indicates a low-voltage warning event. LVWF is set when V Supply transitions + * below the trip point or after reset and V Supply is already below the V LVW. + * + * @param base PMC peripheral base address. + * @return Current LVWF status + * - true: Low-voltage Warning Flag is set. + * - false: the Low-voltage Warning does not happen. + */ +static inline bool PMC_GetLowVoltWarningFlag(PMC_Type *base) +{ + return (bool)(base->LVDSC2 & PMC_LVDSC2_LVWF_MASK); +} + +/*! + * @brief Acknowledges the Low-voltage Warning flag. + * + * This function acknowledges the low voltage warning errors (write 1 to + * clear LVWF). + * + * @param base PMC peripheral base address. + */ +static inline void PMC_ClearLowVoltWarningFlag(PMC_Type *base) +{ + base->LVDSC2 |= PMC_LVDSC2_LVWACK_MASK; +} + +#if (defined(FSL_FEATURE_PMC_HAS_HVDSC1) && FSL_FEATURE_PMC_HAS_HVDSC1) +/*! + * @brief Configures the high-voltage detect setting. + * + * This function configures the high-voltage detect setting, including the trip + * point voltage setting, enabling or disabling the interrupt, enabling or disabling the system reset. + * + * @param base PMC peripheral base address. + * @param config High-voltage detect configuration structure. + */ +void PMC_ConfigureHighVoltDetect(PMC_Type *base, const pmc_high_volt_detect_config_t *config); + +/*! + * @brief Gets the High-voltage Detect Flag status. + * + * This function reads the current HVDF status. If it returns 1, a low + * voltage event is detected. + * + * @param base PMC peripheral base address. + * @return Current high-voltage detect flag + * - true: High-voltage detected + * - false: High-voltage not detected + */ +static inline bool PMC_GetHighVoltDetectFlag(PMC_Type *base) +{ + return (bool)(base->HVDSC1 & PMC_HVDSC1_HVDF_MASK); +} + +/*! + * @brief Acknowledges clearing the High-voltage Detect flag. + * + * This function acknowledges the high-voltage detection errors (write 1 to + * clear HVDF). + * + * @param base PMC peripheral base address. + */ +static inline void PMC_ClearHighVoltDetectFlag(PMC_Type *base) +{ + base->HVDSC1 |= PMC_HVDSC1_HVDACK_MASK; +} +#endif /* FSL_FEATURE_PMC_HAS_HVDSC1 */ + +#if ((defined(FSL_FEATURE_PMC_HAS_BGBE) && FSL_FEATURE_PMC_HAS_BGBE) || \ + (defined(FSL_FEATURE_PMC_HAS_BGEN) && FSL_FEATURE_PMC_HAS_BGEN) || \ + (defined(FSL_FEATURE_PMC_HAS_BGBDS) && FSL_FEATURE_PMC_HAS_BGBDS)) +/*! + * @brief Configures the PMC bandgap. + * + * This function configures the PMC bandgap, including the drive select and + * behavior in low-power mode. + * + * @param base PMC peripheral base address. + * @param config Pointer to the configuration structure + */ +void PMC_ConfigureBandgapBuffer(PMC_Type *base, const pmc_bandgap_buffer_config_t *config); +#endif + +#if (defined(FSL_FEATURE_PMC_HAS_ACKISO) && FSL_FEATURE_PMC_HAS_ACKISO) +/*! + * @brief Gets the acknowledge Peripherals and I/O pads isolation flag. + * + * This function reads the Acknowledge Isolation setting that indicates + * whether certain peripherals and the I/O pads are in a latched state as + * a result of having been in the VLLS mode. + * + * @param base PMC peripheral base address. + * @param base Base address for current PMC instance. + * @return ACK isolation + * 0 - Peripherals and I/O pads are in a normal run state. + * 1 - Certain peripherals and I/O pads are in an isolated and + * latched state. + */ +static inline bool PMC_GetPeriphIOIsolationFlag(PMC_Type *base) +{ + return (bool)(base->REGSC & PMC_REGSC_ACKISO_MASK); +} + +/*! + * @brief Acknowledges the isolation flag to Peripherals and I/O pads. + * + * This function clears the ACK Isolation flag. Writing one to this setting + * when it is set releases the I/O pads and certain peripherals to their normal + * run mode state. + * + * @param base PMC peripheral base address. + */ +static inline void PMC_ClearPeriphIOIsolationFlag(PMC_Type *base) +{ + base->REGSC |= PMC_REGSC_ACKISO_MASK; +} +#endif /* FSL_FEATURE_PMC_HAS_ACKISO */ + +#if (defined(FSL_FEATURE_PMC_HAS_REGONS) && FSL_FEATURE_PMC_HAS_REGONS) +/*! + * @brief Gets the regulator regulation status. + * + * This function returns the regulator to run a regulation status. It provides + * the current status of the internal voltage regulator. + * + * @param base PMC peripheral base address. + * @param base Base address for current PMC instance. + * @return Regulation status + * 0 - Regulator is in a stop regulation or in transition to/from the regulation. + * 1 - Regulator is in a run regulation. + * + */ +static inline bool PMC_IsRegulatorInRunRegulation(PMC_Type *base) +{ + return (bool)(base->REGSC & PMC_REGSC_REGONS_MASK); +} +#endif /* FSL_FEATURE_PMC_HAS_REGONS */ + +/*@}*/ + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/*! @}*/ + +#endif /* _FSL_PMC_H_*/