Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_spi.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_spi.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,361 @@
+/* 
+ * Copyright (c) 2015 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+/**
+ * @defgroup nrf_spi_hal SPI HAL
+ * @{
+ * @ingroup nrf_spi_master
+ *
+ * @brief Hardware access layer for accessing the SPI peripheral.
+ */
+
+#ifndef NRF_SPI_H__
+#define NRF_SPI_H__
+
+#include <stddef.h>
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "nrf.h"
+
+
+/**
+ * @brief This value can be used as a parameter for the @ref nrf_spi_pins_set
+ *        function to specify that a given SPI signal (SCK, MOSI, or MISO)
+ *        shall not be connected to a physical pin.
+ */
+#define NRF_SPI_PIN_NOT_CONNECTED  0xFFFFFFFF
+
+
+/**
+ * @brief SPI events.
+ */
+typedef enum
+{
+    /*lint -save -e30*/
+    NRF_SPI_EVENT_READY = offsetof(NRF_SPI_Type, EVENTS_READY) ///< TXD byte sent and RXD byte received.
+    /*lint -restore*/
+} nrf_spi_event_t;
+
+/**
+ * @brief SPI interrupts.
+ */
+typedef enum
+{
+    NRF_SPI_INT_READY_MASK = SPI_INTENSET_READY_Msk ///< Interrupt on READY event.
+} nrf_spi_int_mask_t;
+
+/**
+ * @brief SPI data rates.
+ */
+typedef enum
+{
+    NRF_SPI_FREQ_125K = SPI_FREQUENCY_FREQUENCY_K125,   ///< 125 kbps.
+    NRF_SPI_FREQ_250K = SPI_FREQUENCY_FREQUENCY_K250,   ///< 250 kbps.
+    NRF_SPI_FREQ_500K = SPI_FREQUENCY_FREQUENCY_K500,   ///< 500 kbps.
+    NRF_SPI_FREQ_1M   = SPI_FREQUENCY_FREQUENCY_M1,     ///< 1 Mbps.
+    NRF_SPI_FREQ_2M   = SPI_FREQUENCY_FREQUENCY_M2,     ///< 2 Mbps.
+    NRF_SPI_FREQ_4M   = SPI_FREQUENCY_FREQUENCY_M4,     ///< 4 Mbps.
+    // [conversion to 'int' needed to prevent compilers from complaining
+    //  that the provided value (0x80000000UL) is out of range of "int"]
+    NRF_SPI_FREQ_8M   = (int)SPI_FREQUENCY_FREQUENCY_M8 ///< 8 Mbps.
+} nrf_spi_frequency_t;
+
+/**
+ * @brief SPI modes.
+ */
+typedef enum
+{
+    NRF_SPI_MODE_0, ///< SCK active high, sample on leading edge of clock.
+    NRF_SPI_MODE_1, ///< SCK active high, sample on trailing edge of clock.
+    NRF_SPI_MODE_2, ///< SCK active low, sample on leading edge of clock.
+    NRF_SPI_MODE_3  ///< SCK active low, sample on trailing edge of clock.
+} nrf_spi_mode_t;
+
+/**
+ * @brief SPI bit orders.
+ */
+typedef enum
+{
+    NRF_SPI_BIT_ORDER_MSB_FIRST = SPI_CONFIG_ORDER_MsbFirst, ///< Most significant bit shifted out first.
+    NRF_SPI_BIT_ORDER_LSB_FIRST = SPI_CONFIG_ORDER_LsbFirst  ///< Least significant bit shifted out first.
+} nrf_spi_bit_order_t;
+
+
+/**
+ * @brief Function for clearing a specific SPI event.
+ *
+ * @param[in] p_spi     SPI instance.
+ * @param[in] spi_event Event to clear.
+ */
+__STATIC_INLINE void nrf_spi_event_clear(NRF_SPI_Type * p_spi,
+                                         nrf_spi_event_t spi_event);
+
+/**
+ * @brief Function for checking the state of a specific SPI event.
+ *
+ * @param[in] p_spi     SPI instance.
+ * @param[in] spi_event Event to check.
+ *
+ * @retval true  If the event is set.
+ * @retval false If the event is not set.
+ */
+__STATIC_INLINE bool nrf_spi_event_check(NRF_SPI_Type * p_spi,
+                                         nrf_spi_event_t spi_event);
+
+/**
+ * @brief Function for getting the address of a specific SPI event register.
+ *
+ * @param[in] p_spi     SPI instance.
+ * @param[in] spi_event Requested event.
+ *
+ * @return Address of the specified event register.
+ */
+__STATIC_INLINE uint32_t * nrf_spi_event_address_get(NRF_SPI_Type  * p_spi,
+                                                     nrf_spi_event_t spi_event);
+
+/**
+ * @brief Function for enabling specified interrupts.
+ *
+ * @param[in] p_spi         SPI instance.
+ * @param[in] spi_int_mask  Interrupts to enable.
+ */
+__STATIC_INLINE void nrf_spi_int_enable(NRF_SPI_Type * p_spi,
+                                        uint32_t spi_int_mask);
+
+/**
+ * @brief Function for disabling specified interrupts.
+ *
+ * @param[in] p_spi         SPI instance.
+ * @param[in] spi_int_mask  Interrupts to disable.
+ */
+__STATIC_INLINE void nrf_spi_int_disable(NRF_SPI_Type * p_spi,
+                                         uint32_t spi_int_mask);
+
+/**
+ * @brief Function for retrieving the state of a given interrupt.
+ *
+ * @param[in] p_spi   SPI instance.
+ * @param[in] spi_int Interrupt to check.
+ *
+ * @retval true  If the interrupt is enabled.
+ * @retval false If the interrupt is not enabled.
+ */
+__STATIC_INLINE bool nrf_spi_int_enable_check(NRF_SPI_Type * p_spi,
+                                              nrf_spi_int_mask_t spi_int);
+
+/**
+ * @brief Function for enabling the SPI peripheral.
+ *
+ * @param[in] p_spi SPI instance.
+ */
+__STATIC_INLINE void nrf_spi_enable(NRF_SPI_Type * p_spi);
+
+/**
+ * @brief Function for disabling the SPI peripheral.
+ *
+ * @param[in] p_spi SPI instance.
+ */
+__STATIC_INLINE void nrf_spi_disable(NRF_SPI_Type * p_spi);
+
+/**
+ * @brief Function for configuring SPI pins.
+ *
+ * If a given signal is not needed, pass the @ref NRF_SPI_PIN_NOT_CONNECTED
+ * value instead of its pin number.
+ *
+ * @param[in] p_spi     SPI instance.
+ * @param[in] sck_pin   SCK pin number.
+ * @param[in] mosi_pin  MOSI pin number.
+ * @param[in] miso_pin  MISO pin number.
+ */
+__STATIC_INLINE void nrf_spi_pins_set(NRF_SPI_Type * p_spi,
+                                      uint32_t sck_pin,
+                                      uint32_t mosi_pin,
+                                      uint32_t miso_pin);
+
+/**
+ * @brief Function for writing data to the SPI transmitter register.
+ *
+ * @param[in] p_spi SPI instance.
+ * @param[in] data  TX data to send.
+ */
+__STATIC_INLINE void nrf_spi_txd_set(NRF_SPI_Type * p_spi, uint8_t data);
+
+/**
+ * @brief Function for reading data from the SPI receiver register.
+ *
+ * @param[in] p_spi SPI instance.
+ *
+ * @return RX data received.
+ */
+__STATIC_INLINE uint8_t nrf_spi_rxd_get(NRF_SPI_Type * p_spi);
+
+/**
+ * @brief Function for setting the SPI master data rate.
+ *
+ * @param[in] p_spi     SPI instance.
+ * @param[in] frequency SPI frequency.
+ */
+__STATIC_INLINE void nrf_spi_frequency_set(NRF_SPI_Type * p_spi,
+                                           nrf_spi_frequency_t frequency);
+
+/**
+ * @brief Function for setting the SPI configuration.
+ *
+ * @param[in] p_spi         SPI instance.
+ * @param[in] spi_mode      SPI mode.
+ * @param[in] spi_bit_order SPI bit order.
+ */
+__STATIC_INLINE void nrf_spi_configure(NRF_SPI_Type * p_spi,
+                                       nrf_spi_mode_t spi_mode,
+                                       nrf_spi_bit_order_t spi_bit_order);
+
+
+#ifndef SUPPRESS_INLINE_IMPLEMENTATION
+
+__STATIC_INLINE void nrf_spi_event_clear(NRF_SPI_Type * p_spi,
+                                         nrf_spi_event_t spi_event)
+{
+    *((volatile uint32_t *)((uint8_t *)p_spi + (uint32_t)spi_event)) = 0x0UL;
+}
+
+__STATIC_INLINE bool nrf_spi_event_check(NRF_SPI_Type * p_spi,
+                                         nrf_spi_event_t spi_event)
+{
+    return (bool)*(volatile uint32_t *)((uint8_t *)p_spi + (uint32_t)spi_event);
+}
+
+__STATIC_INLINE uint32_t * nrf_spi_event_address_get(NRF_SPI_Type * p_spi,
+                                                     nrf_spi_event_t spi_event)
+{
+    return (uint32_t *)((uint8_t *)p_spi + (uint32_t)spi_event);
+}
+
+__STATIC_INLINE void nrf_spi_int_enable(NRF_SPI_Type * p_spi,
+                                        uint32_t spi_int_mask)
+{
+    p_spi->INTENSET = spi_int_mask;
+}
+
+__STATIC_INLINE void nrf_spi_int_disable(NRF_SPI_Type * p_spi,
+                                         uint32_t spi_int_mask)
+{
+    p_spi->INTENCLR = spi_int_mask;
+}
+
+__STATIC_INLINE bool nrf_spi_int_enable_check(NRF_SPI_Type * p_spi,
+                                              nrf_spi_int_mask_t spi_int)
+{
+    return (bool)(p_spi->INTENSET & spi_int);
+}
+
+__STATIC_INLINE void nrf_spi_enable(NRF_SPI_Type * p_spi)
+{
+    p_spi->ENABLE = (SPI_ENABLE_ENABLE_Enabled << SPI_ENABLE_ENABLE_Pos);
+}
+
+__STATIC_INLINE void nrf_spi_disable(NRF_SPI_Type * p_spi)
+{
+    p_spi->ENABLE = (SPI_ENABLE_ENABLE_Disabled << SPI_ENABLE_ENABLE_Pos);
+}
+
+__STATIC_INLINE void nrf_spi_pins_set(NRF_SPI_Type * p_spi,
+                                      uint32_t sck_pin,
+                                      uint32_t mosi_pin,
+                                      uint32_t miso_pin)
+{
+    p_spi->PSELSCK  = sck_pin;
+    p_spi->PSELMOSI = mosi_pin;
+    p_spi->PSELMISO = miso_pin;
+}
+
+__STATIC_INLINE void nrf_spi_txd_set(NRF_SPI_Type * p_spi, uint8_t data)
+{
+    p_spi->TXD = data;
+}
+
+__STATIC_INLINE uint8_t nrf_spi_rxd_get(NRF_SPI_Type * p_spi)
+{
+    return p_spi->RXD;
+}
+
+__STATIC_INLINE void nrf_spi_frequency_set(NRF_SPI_Type * p_spi,
+                                           nrf_spi_frequency_t frequency)
+{
+    p_spi->FREQUENCY = frequency;
+}
+
+__STATIC_INLINE void nrf_spi_configure(NRF_SPI_Type * p_spi,
+                                       nrf_spi_mode_t spi_mode,
+                                       nrf_spi_bit_order_t spi_bit_order)
+{
+    uint32_t config = (spi_bit_order == NRF_SPI_BIT_ORDER_MSB_FIRST ?
+        SPI_CONFIG_ORDER_MsbFirst : SPI_CONFIG_ORDER_LsbFirst);
+    switch (spi_mode)
+    {
+    default:
+    case NRF_SPI_MODE_0:
+        config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos) |
+                  (SPI_CONFIG_CPHA_Leading    << SPI_CONFIG_CPHA_Pos);
+        break;
+
+    case NRF_SPI_MODE_1:
+        config |= (SPI_CONFIG_CPOL_ActiveHigh << SPI_CONFIG_CPOL_Pos) |
+                  (SPI_CONFIG_CPHA_Trailing   << SPI_CONFIG_CPHA_Pos);
+        break;
+
+    case NRF_SPI_MODE_2:
+        config |= (SPI_CONFIG_CPOL_ActiveLow  << SPI_CONFIG_CPOL_Pos) |
+                  (SPI_CONFIG_CPHA_Leading    << SPI_CONFIG_CPHA_Pos);
+        break;
+
+    case NRF_SPI_MODE_3:
+        config |= (SPI_CONFIG_CPOL_ActiveLow  << SPI_CONFIG_CPOL_Pos) |
+                  (SPI_CONFIG_CPHA_Trailing   << SPI_CONFIG_CPHA_Pos);
+        break;
+    }
+    p_spi->CONFIG = config;
+}
+
+#endif // SUPPRESS_INLINE_IMPLEMENTATION
+
+#endif // NRF_SPI_H__
+
+/** @} */