Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_sdm.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_sdm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,274 @@
+/* 
+ * Copyright (c) 2000 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+/**
+  @defgroup nrf_sdm_api SoftDevice Manager API
+  @{
+
+  @brief APIs for SoftDevice management.
+
+*/
+
+/* Header guard */
+#ifndef NRF_SDM_H__
+#define NRF_SDM_H__
+
+#include "nrf_svc.h"
+#include "nrf.h"
+#include "nrf_soc.h"
+#include "nrf_error_sdm.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup NRF_SDM_DEFINES Defines
+ * @{ */
+#ifdef NRFSOC_DOXYGEN
+//Stuff defined elsewere, to satisfy doxygen
+#define MBR_SIZE 0
+#warning test
+#endif
+
+/** @brief SoftDevice Manager SVC Base number. */
+#define SDM_SVC_BASE 0x10
+
+/** @brief Defines the SoftDevice Information Structure location (address) as an offset from
+the start of the softdevice (without MBR)*/
+#define SOFTDEVICE_INFO_STRUCT_OFFSET (0x2000)
+
+/** @brief Defines the absolute Softdevice information structure location (address)*/
+#define SOFTDEVICE_INFO_STRUCT_ADDRESS (SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE)
+
+/** @brief Defines the offset for Softdevice size value relative to Softdevice base address*/
+#define SD_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x08)
+
+/** @brief Defines the offset for FWID value relative to Softdevice base address*/
+#define SD_FWID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x0C)
+
+/** @brief Defines a macro for retreiving the actual Softdevice size value from a given base address
+           use @ref MBR_SIZE when Softdevice is installed just above the MBR (the usual case)*/
+#define SD_SIZE_GET(baseaddr) (*((uint32_t *) ((baseaddr) + SD_SIZE_OFFSET)))
+
+/** @brief Defines a macro for retreiving the actual FWID value from a given base address
+           use @ref MBR_SIZE when Softdevice is installed just above the MBR (the usual case)*/
+#define SD_FWID_GET(baseaddr) ((*((uint32_t *) ((baseaddr) + SD_FWID_OFFSET))) & 0xFFFF)
+
+/**@defgroup NRF_FAULT_ID_RANGES Fault ID ranges
+ * @{ */
+#define NRF_FAULT_ID_SD_RANGE_START     0x00000000            /**< SoftDevice ID range start. */
+#define NRF_FAULT_ID_APP_RANGE_START    0x00001000            /**< Application ID range start. */
+/**@} */
+
+/**@defgroup NRF_FAULT_IDS Fault ID types
+ * @{ */
+#define NRF_FAULT_ID_SD_ASSERT    (NRF_FAULT_ID_SD_RANGE_START + 1)           /**< SoftDevice assertion. The info parameter will be set to 0x00000000. */
+#define NRF_FAULT_ID_APP_MEMACC   (NRF_FAULT_ID_APP_RANGE_START + 1)          /**< Application invalid memory access. The info parameter will contain the address in memory that was accessed. */
+/**@} */
+
+/** @} */
+
+/** @addtogroup NRF_SDM_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF SoftDevice Manager API SVC numbers. */
+enum NRF_SD_SVCS
+{
+  SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */
+  SD_SOFTDEVICE_DISABLE,               /**< ::sd_softdevice_disable */
+  SD_SOFTDEVICE_IS_ENABLED,            /**< ::sd_softdevice_is_enabled */
+  SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, /**< ::sd_softdevice_vector_table_base_set */
+  SVC_SDM_LAST                         /**< Placeholder for last SDM SVC */
+};
+
+/** @} */
+
+/** @addtogroup NRF_SDM_DEFINES Defines
+ * @{ */
+
+/**@defgroup NRF_CLOCK_LF_XTAL_ACCURACY Clock accuracy * @{ */
+
+#define NRF_CLOCK_LF_XTAL_ACCURACY_250_PPM (0) /* Default */
+#define NRF_CLOCK_LF_XTAL_ACCURACY_500_PPM (1)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_150_PPM (2)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_100_PPM (3)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_75_PPM  (4)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_50_PPM  (5)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_30_PPM  (6)
+#define NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM  (7)
+
+/** @} */
+
+/**@defgroup NRF_CLOCK_LF_SRC Possible lfclk oscillator sources * @{ */
+
+#define NRF_CLOCK_LF_SRC_RC      (0)                        /**< LFCLK RC oscillator. */
+#define NRF_CLOCK_LF_SRC_XTAL    (1)                        /**< LFCLK crystal oscillator. */
+#define NRF_CLOCK_LF_SRC_SYNTH   (2)                        /**< LFCLK Synthesized from HFCLK. */
+
+/** @} */
+/** @} */
+
+/** @addtogroup NRF_SDM_TYPES Types
+ * @{ */
+
+/**@brief Type representing lfclk oscillator source. */
+typedef struct
+{
+  uint8_t source;        /**< LF oscillator clock source, see @ref NRF_CLOCK_LF_SRC. */
+  uint8_t rc_ctiv;      /**< Only for NRF_CLOCK_LF_SRC_RC: Calibration timer interval in 1/4 second
+                              units (nRF51: 1-64, nRF52: 1-32).
+                              @note To avoid excessive clock drift, 0.5 degrees Celsius is the
+                                    maximum temperature change allowed in one calibration timer
+                                    interval. The interval should be selected to ensure this.
+
+                              @note Must be 0 if source is not NRF_CLOCK_LF_SRC_RC.  */
+  uint8_t rc_temp_ctiv; /**<  Only for NRF_CLOCK_LF_SRC_RC: How often (in number of calibration
+                              intervals) the RC oscillator shall be calibrated if the temperature
+                              hasn't changed.
+                                  0: Always calibrate even if the temperature hasn't changed.
+                                  1: Only calibrate if the temperature has changed (nRF51 only).
+                                  2-33: Check the temperature and only calibrate if it has changed,
+                                        however calibration will take place every rc_temp_ctiv
+                                        intervals in any case.
+
+                              @note Must be 0 if source is not NRF_CLOCK_LF_SRC_RC.
+
+                              @note For nRF52, the application must ensure calibration at least once
+                                    every 8 seconds to ensure +/-250ppm clock stability. The
+                                    recommended configuration for NRF_CLOCK_LF_SRC_RC on nRF52 is
+                                    rc_ctiv=16 and rc_temp_ctiv=2. This will ensure calibration at
+                                    least once every 8 seconds and for temperature changes of 0.5
+                                    degrees Celsius every 4 seconds. See the Product Specification
+                                    for the nRF52 device being used for more information.*/
+  uint8_t xtal_accuracy; /**< External crystal clock accuracy used in the LL to compute timing windows.
+
+                              @note For the NRF_CLOCK_LF_SRC_RC clock source this parameter is ignored. */
+} nrf_clock_lf_cfg_t;
+
+/**@brief Fault Handler type.
+ *
+ * When certain unrecoverable errors occur within the application or SoftDevice the fault handler will be called back.
+ * The protocol stack will be in an undefined state when this happens and the only way to recover will be to
+ * perform a reset, using e.g. CMSIS NVIC_SystemReset().
+ *
+ * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the fault callback.
+ *
+ * @param[in] id Fault identifier. See @ref NRF_FAULT_IDS.
+ * @param[in] pc The program counter of the instruction that triggered the fault.
+ * @param[in] info Optional additional information regarding the fault. Refer to each Fault identifier for details.
+ */
+typedef void (*nrf_fault_handler_t)(uint32_t id, uint32_t pc, uint32_t info);
+
+/** @} */
+
+/** @addtogroup NRF_SDM_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enables the SoftDevice and by extension the protocol stack.
+ *
+ * @note Some care must be taken if a low frequency clock source is already running when calling this function:
+ *       If the LF clock has a different source then the one currently running, it will be stopped. Then, the new
+ *       clock source will be started.
+ *
+ * @note This function has no effect when returning with an error.
+ *
+ * @post If return code is ::NRF_SUCCESS
+ *       - SoC library and protocol stack APIs are made available.
+ *       - A portion of RAM will be unavailable (see relevant SDS documentation).
+ *       - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation).
+ *       - Interrupts will not arrive from protected peripherals or interrupts.
+ *       - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice.
+ *       - Interrupt latency may be affected by the SoftDevice  (see relevant SDS documentation).
+ *       - Chosen low frequency clock source will be running.
+ *
+ * @param p_clock_lf_cfg Low frequency clock source and accuracy.
+                         If NULL the clock will be configured as an rc source with rc_ctiv = 16 and .rc_temp_ctiv = 2
+                         In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock.
+ * @param fault_handler Callback to be invoked in case of fault.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated.
+ * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level.
+ * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected.
+ */
+SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lf_cfg_t const * p_clock_lf_cfg, nrf_fault_handler_t fault_handler));
+
+
+/**@brief Disables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to disable the SoftDevice.
+ *
+ * @post SoC library and protocol stack APIs are made unavailable.
+ * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
+ * @post All peripherals used by the SoftDevice will be reset to default values.
+ * @post All of RAM become available.
+ * @post All interrupts are forwarded to the application.
+ * @post LFCLK source chosen in ::sd_softdevice_enable will be left running.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void));
+
+/**@brief Check if the SoftDevice is enabled.
+ *
+ * @param[out]  p_softdevice_enabled If the SoftDevice is enabled: 1 else 0.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled));
+
+/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice
+ *
+ * This function is only intended to be called when a bootloader is enabled.
+ *
+ * @param[in] address The base address of the interrupt vector table for forwarded interrupts.
+
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, uint32_t, sd_softdevice_vector_table_base_set(uint32_t address));
+
+/** @} */
+
+#ifdef __cplusplus
+}
+#endif
+#endif // NRF_SDM_H__
+
+/**
+  @}
+*/