Diff: TARGET_SAMR21G18A/TOOLCHAIN_GCC_ARM/power.h

Revision:

171:3a7713b1edbc

Parent:

111:4336505e4b1c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMR21G18A/TOOLCHAIN_GCC_ARM/power.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,224 @@
+/**
+ * \file
+ *
+ * \brief SAM Power related functionality
+ *
+ * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+#ifndef POWER_H_INCLUDED
+#define POWER_H_INCLUDED
+
+#include <compiler.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup asfdoc_sam0_system_group
+ * @{
+ */
+
+/**
+ * \brief Voltage references within the device.
+ *
+ * List of available voltage references (VREF) that may be used within the
+ * device.
+ */
+enum system_voltage_reference {
+    /** Temperature sensor voltage reference. */
+    SYSTEM_VOLTAGE_REFERENCE_TEMPSENSE,
+    /** Bandgap voltage reference. */
+    SYSTEM_VOLTAGE_REFERENCE_BANDGAP,
+};
+
+/**
+ * \brief Device sleep modes.
+ *
+ * List of available sleep modes in the device. A table of clocks available in
+ * different sleep modes can be found in \ref asfdoc_sam0_system_module_overview_sleep_mode.
+ */
+enum system_sleepmode {
+    /** IDLE 0 sleep mode. */
+    SYSTEM_SLEEPMODE_IDLE_0,
+    /** IDLE 1 sleep mode. */
+    SYSTEM_SLEEPMODE_IDLE_1,
+    /** IDLE 2 sleep mode. */
+    SYSTEM_SLEEPMODE_IDLE_2,
+    /** Standby sleep mode. */
+    SYSTEM_SLEEPMODE_STANDBY,
+};
+
+
+
+/**
+ * \name Voltage References
+ * @{
+ */
+
+/**
+ * \brief Enable the selected voltage reference
+ *
+ * Enables the selected voltage reference source, making the voltage reference
+ * available on a pin as well as an input source to the analog peripherals.
+ *
+ * \param[in] vref  Voltage reference to enable
+ */
+static inline void system_voltage_reference_enable(
+    const enum system_voltage_reference vref)
+{
+    switch (vref) {
+        case SYSTEM_VOLTAGE_REFERENCE_TEMPSENSE:
+            SYSCTRL->VREF.reg |= SYSCTRL_VREF_TSEN;
+            break;
+
+        case SYSTEM_VOLTAGE_REFERENCE_BANDGAP:
+            SYSCTRL->VREF.reg |= SYSCTRL_VREF_BGOUTEN;
+            break;
+
+        default:
+            Assert(false);
+            return;
+    }
+}
+
+/**
+ * \brief Disable the selected voltage reference
+ *
+ * Disables the selected voltage reference source.
+ *
+ * \param[in] vref  Voltage reference to disable
+ */
+static inline void system_voltage_reference_disable(
+    const enum system_voltage_reference vref)
+{
+    switch (vref) {
+        case SYSTEM_VOLTAGE_REFERENCE_TEMPSENSE:
+            SYSCTRL->VREF.reg &= ~SYSCTRL_VREF_TSEN;
+            break;
+
+        case SYSTEM_VOLTAGE_REFERENCE_BANDGAP:
+            SYSCTRL->VREF.reg &= ~SYSCTRL_VREF_BGOUTEN;
+            break;
+
+        default:
+            Assert(false);
+            return;
+    }
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * \name Device Sleep Control
+ * @{
+ */
+
+/**
+ * \brief Set the sleep mode of the device
+ *
+ * Sets the sleep mode of the device; the configured sleep mode will be entered
+ * upon the next call of the \ref system_sleep() function.
+ *
+ * For an overview of which systems are disabled in sleep for the different
+ * sleep modes, see \ref asfdoc_sam0_system_module_overview_sleep_mode.
+ *
+ * \param[in] sleep_mode  Sleep mode to configure for the next sleep operation
+ *
+ * \retval STATUS_OK               Operation completed successfully
+ * \retval STATUS_ERR_INVALID_ARG  The requested sleep mode was invalid or not
+ *                                 available
+ */
+static inline enum status_code system_set_sleepmode(
+    const enum system_sleepmode sleep_mode)
+{
+#if (SAMD20 || SAMD21)
+    /* Errata: Make sure that the Flash does not power all the way down
+     * when in sleep mode. */
+    NVMCTRL->CTRLB.bit.SLEEPPRM = NVMCTRL_CTRLB_SLEEPPRM_DISABLED_Val;
+#endif
+
+    switch (sleep_mode) {
+        case SYSTEM_SLEEPMODE_IDLE_0:
+        case SYSTEM_SLEEPMODE_IDLE_1:
+        case SYSTEM_SLEEPMODE_IDLE_2:
+            SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
+            PM->SLEEP.reg = sleep_mode;
+            break;
+
+        case SYSTEM_SLEEPMODE_STANDBY:
+            SCB->SCR |=  SCB_SCR_SLEEPDEEP_Msk;
+            break;
+
+        default:
+            return STATUS_ERR_INVALID_ARG;
+    }
+
+    return STATUS_OK;
+}
+
+/**
+ * \brief Put the system to sleep waiting for interrupt
+ *
+ * Executes a device DSB (Data Synchronization Barrier) instruction to ensure
+ * all ongoing memory accesses have completed, then a WFI (Wait For Interrupt)
+ * instruction to place the device into the sleep mode specified by
+ * \ref system_set_sleepmode until woken by an interrupt.
+ */
+static inline void system_sleep(void)
+{
+    __DSB();
+    __WFI();
+}
+
+/**
+ * @}
+ */
+
+/** @} */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* POWER_H_INCLUDED */