The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_SAMR21G18A/TOOLCHAIN_ARM_MICRO/objects.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 111:4336505e4b1c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_SAMR21G18A/TOOLCHAIN_ARM_MICRO/objects.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,132 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "cmsis.h" +#include "PortNames.h" +#include "PeripheralNames.h" +#include "gpio_object.h" +#include "tc.h" +#include "tcc.h" +#include "adc.h" +#include "extint.h" +#include "i2c_master.h" +#include "i2c_slave.h" +#include "dma_api.h" + +#if DEVICE_ANALOGOUT +#include "dac.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +struct gpio_irq_s { + uint8_t irqmask; + uint32_t port; + uint32_t pin; + uint32_t ch; + struct extint_chan_conf config_extint_chan; +}; + +struct port_s { + __IO uint32_t *OUTCLR; + __IO uint32_t *OUTSET; + __I uint32_t *IN; + __I uint32_t *OUT; + + PortName port; + uint32_t mask; + uint8_t powersave; + uint8_t mode; + uint8_t direction; +}; + +struct serial_s { + Sercom *usart; + uint32_t index; + uint32_t parity; + uint32_t stopbits; + uint32_t character_size; + uint32_t mux_setting; + uint32_t baudrate; + PinName pins[4]; +#if DEVICE_SERIAL_ASYNCH + uint32_t events; +#endif +}; + +struct analogin_s { + ADCName adc; + struct adc_config config_adc; +}; + +#if DEVICE_ANALOGOUT +struct dac_s { + DACName dac; + PinName pin; + uint32_t channel; + struct dac_module dac_instance; +}; +#endif + +struct pwmout_s { + struct tcc_module tcc; + PinName pin; + uint32_t period; + float duty_cycle; + double us_per_cycle; + enum gclk_generator clock_source; + enum tc_clock_prescaler clock_prescaler; +}; + +struct i2c_s { + struct i2c_master_module master; + struct i2c_slave_module slave; + uint8_t mode; + uint32_t baud_rate; + uint32_t baud_rate_high_speed; + uint8_t start_pending; + PinName pins[2]; +#if DEVICE_I2C_ASYNCH + uint32_t events; + uint32_t handler; + struct i2c_master_packet wr_packet; + struct i2c_master_packet rd_packet; +#endif +}; + +struct spi_s { + Sercom *spi; + uint8_t mode; + PinName pins[4]; +#if DEVICE_SPI_ASYNCH + uint8_t status; + uint32_t mask; + uint32_t event; + void *tx_buffer; + void *rx_buffer; + uint8_t dma_usage; +#endif +}; + +#ifdef __cplusplus +} +#endif + +#endif