The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_IAR/stm32l4xx_hal_adc_ex.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 165:d1b4690b3f8b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_IAR/stm32l4xx_hal_adc_ex.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,1396 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_adc_ex.h + * @author MCD Application Team + * @brief Header file of ADC HAL extended module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_ADC_EX_H +#define __STM32L4xx_HAL_ADC_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal_def.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup ADCEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup ADCEx_Exported_Types ADC Extended Exported Types + * @{ + */ + +/** + * @brief ADC Injected Conversion Oversampling structure definition + */ +typedef struct +{ + uint32_t Ratio; /*!< Configures the oversampling ratio. + This parameter can be a value of @ref ADC_HAL_EC_OVS_RATIO */ + + uint32_t RightBitShift; /*!< Configures the division coefficient for the Oversampler. + This parameter can be a value of @ref ADC_HAL_EC_OVS_SHIFT */ +}ADC_InjOversamplingTypeDef; + +/** + * @brief Structure definition of ADC group injected and ADC channel affected to ADC group injected + * @note Parameters of this structure are shared within 2 scopes: + * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, InjectedOffsetNumber, InjectedOffset + * - Scope ADC group injected (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode, + * AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConv, ExternalTrigInjecConvEdge, InjecOversamplingMode, InjecOversampling. + * @note The setting of these parameters by function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state. + * ADC state can be either: + * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'InjectedSingleDiff') + * - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext', 'InjecOversampling': ADC enabled without conversion on going on injected group. + * - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv': ADC enabled without conversion on going on regular and injected groups. + * - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going + * on ADC groups regular and injected. + * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed + * without error reporting (as it can be the expected behavior in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly). + */ +typedef struct +{ + uint32_t InjectedChannel; /*!< Specifies the channel to configure into ADC group injected. + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL + Note: Depending on devices and ADC instances, some channels may not be available on device package pins. Refer to device datasheet for channels availability. */ + + uint32_t InjectedRank; /*!< Specifies the rank in the ADC group injected sequencer. + This parameter must be a value of @ref ADC_LL_EC_INJ_SEQ_RANKS. + Note: to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by + the new channel setting (or parameter number of conversions adjusted) */ + + uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel. + Unit: ADC clock cycles. + Conversion time is the addition of sampling time and processing time + (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits). + This parameter can be a value of @ref ADC_HAL_EC_CHANNEL_SAMPLINGTIME. + Caution: This parameter applies to a channel that can be used in a regular and/or injected group. + It overwrites the last setting. + Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor), + sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting) + Refer to device datasheet for timings values. */ + + uint32_t InjectedSingleDiff; /*!< Selection of single-ended or differential input. + In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input). + Only channel 'i' has to be configured, channel 'i+1' is configured automatically. + This parameter must be a value of @ref ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING. + Caution: This parameter applies to a channel that can be used in a regular and/or injected group. + It overwrites the last setting. + Note: Refer to Reference Manual to ensure the selected channel is available in differential mode. + Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately. + Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). + If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behavior in case + of another parameter update on the fly) */ + + uint32_t InjectedOffsetNumber; /*!< Selects the offset number. + This parameter can be a value of @ref ADC_HAL_EC_OFFSET_NB. + Caution: Only one offset is allowed per channel. This parameter overwrites the last setting. */ + + uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data. + Offset value must be a positive number. + Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number + between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. + Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled + without continuous mode or external trigger that could launch a conversion). */ + + uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the ADC group injected sequencer. + To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled. + This parameter must be a number between Min_Data = 1 and Max_Data = 4. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + + uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of ADC group injected is performed in Complete-sequence/Discontinuous-sequence + (main sequence subdivided in successive parts). + Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded. + Discontinuous mode can be enabled only if continuous mode is disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). + Note: For injected group, discontinuous mode converts the sequence channel by channel (discontinuous length fixed to 1 rank). + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + + uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC group injected automatic conversion after regular one + This parameter can be set to ENABLE or DISABLE. + Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE) + Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_INJECTED_SOFTWARE_START) + Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete. + To maintain JAUTO always enabled, DMA must be configured in circular mode. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + + uint32_t QueueInjectedContext; /*!< Specifies whether the context queue feature is enabled. + This parameter can be set to ENABLE or DISABLE. + If context queue is enabled, injected sequencer&channels configurations are queued on up to 2 contexts. If a + new injected context is set when queue is full, error is triggered by interruption and through function + 'HAL_ADCEx_InjectedQueueOverflowCallback'. + Caution: This feature request that the sequence is fully configured before injected conversion start. + Therefore, configure channels with as many calls to HAL_ADCEx_InjectedConfigChannel() as the 'InjectedNbrOfConversion' parameter. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. + Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). */ + + uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group. + If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled and software trigger is used instead. + This parameter can be a value of @ref ADC_injected_external_trigger_source. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + + uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group. + This parameter can be a value of @ref ADC_injected_external_trigger_edge. + If trigger source is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded. + Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to + configure a channel on injected group can impact the configuration of other channels previously set. */ + + uint32_t InjecOversamplingMode; /*!< Specifies whether the oversampling feature is enabled or disabled. + This parameter can be set to ENABLE or DISABLE. + Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ + + ADC_InjOversamplingTypeDef InjecOversampling; /*!< Specifies the Oversampling parameters. + Caution: this setting overwrites the previous oversampling configuration if oversampling already enabled. + Note: This parameter can be modified only if there is no conversion is ongoing (both ADSTART and JADSTART cleared). */ +}ADC_InjectionConfTypeDef; + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Structure definition of ADC multimode + * @note The setting of these parameters by function HAL_ADCEx_MultiModeConfigChannel() is conditioned by ADCs state (both Master and Slave ADCs). + * Both Master and Slave ADCs must be disabled. + */ +typedef struct +{ + uint32_t Mode; /*!< Configures the ADC to operate in independent or multimode. + This parameter can be a value of @ref ADC_HAL_EC_MULTI_MODE. */ + + uint32_t DMAAccessMode; /*!< Configures the DMA mode for multimode ADC: + selection whether 2 DMA channels (each ADC uses its own DMA channel) or 1 DMA channel (one DMA channel for both ADC, DMA of ADC master) + This parameter can be a value of @ref ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION. */ + + uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. + This parameter can be a value of @ref ADC_HAL_EC_MULTI_TWOSMP_DELAY. + Delay range depends on selected resolution: + from 1 to 12 clock cycles for 12 bits, from 1 to 10 clock cycles for 10 bits, + from 1 to 8 clock cycles for 8 bits, from 1 to 6 clock cycles for 6 bits. */ +}ADC_MultiModeTypeDef; +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants + * @{ + */ + +/** @defgroup ADC_injected_external_trigger_source ADC group injected trigger source + * @{ + */ +/* ADC group regular trigger sources for all ADC instances */ +#define ADC_INJECTED_SOFTWARE_START (LL_ADC_INJ_TRIG_SOFTWARE) /*!< Software triggers injected group conversion start */ +#define ADC_EXTERNALTRIGINJEC_T1_TRGO (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM1 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T1_TRGO2 (LL_ADC_INJ_TRIG_EXT_TIM1_TRGO2) /*!< ADC group injected conversion trigger from external IP: TIM1 TRGO2. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T1_CC4 (LL_ADC_INJ_TRIG_EXT_TIM1_CH4) /*!< ADC group injected conversion trigger from external IP: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T2_TRGO (LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM2 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T2_CC1 (LL_ADC_INJ_TRIG_EXT_TIM2_CH1) /*!< ADC group injected conversion trigger from external IP: TIM2 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T3_TRGO (LL_ADC_INJ_TRIG_EXT_TIM3_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM3 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T3_CC1 (LL_ADC_INJ_TRIG_EXT_TIM3_CH1) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 1 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T3_CC3 (LL_ADC_INJ_TRIG_EXT_TIM3_CH3) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 3 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T3_CC4 (LL_ADC_INJ_TRIG_EXT_TIM3_CH4) /*!< ADC group injected conversion trigger from external IP: TIM3 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T4_TRGO (LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM4 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T6_TRGO (LL_ADC_INJ_TRIG_EXT_TIM6_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM6 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T8_CC4 (LL_ADC_INJ_TRIG_EXT_TIM8_CH4) /*!< ADC group injected conversion trigger from external IP: TIM8 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T8_TRGO (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM8 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T8_TRGO2 (LL_ADC_INJ_TRIG_EXT_TIM8_TRGO2) /*!< ADC group injected conversion trigger from external IP: TIM8 TRGO2. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_T15_TRGO (LL_ADC_INJ_TRIG_EXT_TIM15_TRGO) /*!< ADC group injected conversion trigger from external IP: TIM15 TRGO. Trigger edge set to rising edge (default setting). */ +#define ADC_EXTERNALTRIGINJEC_EXT_IT15 (LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) /*!< ADC group injected conversion trigger from external IP: external interrupt line 15. Trigger edge set to rising edge (default setting). */ +/** + * @} + */ + +/** @defgroup ADC_injected_external_trigger_edge ADC group injected trigger edge (when external trigger is selected) + * @{ + */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE (0x00000000U) /*!< Injected conversions hardware trigger detection disabled */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING (ADC_JSQR_JEXTEN_0) /*!< Injected conversions hardware trigger detection on the rising edge */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING (ADC_JSQR_JEXTEN_1) /*!< Injected conversions hardware trigger detection on the falling edge */ +#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING (ADC_JSQR_JEXTEN) /*!< Injected conversions hardware trigger detection on both the rising and falling edges */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_CHANNEL_SINGLE_DIFF_ENDING Channel - Single or differential ending + * @{ + */ +#define ADC_SINGLE_ENDED (LL_ADC_SINGLE_ENDED) /*!< ADC channel ending set to single ended (literal also used to set calibration mode) */ +#define ADC_DIFFERENTIAL_ENDED (LL_ADC_DIFFERENTIAL_ENDED) /*!< ADC channel ending set to differential (literal also used to set calibration mode) */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_OFFSET_NB ADC instance - Offset number + * @{ + */ +#define ADC_OFFSET_NONE (ADC_OFFSET_4 + 1U) /*!< ADC offset disabled: no offset correction for the selected ADC channel */ +#define ADC_OFFSET_1 (LL_ADC_OFFSET_1) /*!< ADC offset number 1: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ +#define ADC_OFFSET_2 (LL_ADC_OFFSET_2) /*!< ADC offset number 2: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ +#define ADC_OFFSET_3 (LL_ADC_OFFSET_3) /*!< ADC offset number 3: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ +#define ADC_OFFSET_4 (LL_ADC_OFFSET_4) /*!< ADC offset number 4: ADC channel and offset level to which the offset programmed will be applied (independently of channel mapped on ADC group regular or group injected) */ +/** + * @} + */ + +/** @defgroup ADC_LL_EC_INJ_SEQ_RANKS ADC group injected - Sequencer ranks + * @{ + */ +#define ADC_INJECTED_RANK_1 (LL_ADC_INJ_RANK_1) /*!< ADC group injected sequencer rank 1 */ +#define ADC_INJECTED_RANK_2 (LL_ADC_INJ_RANK_2) /*!< ADC group injected sequencer rank 2 */ +#define ADC_INJECTED_RANK_3 (LL_ADC_INJ_RANK_3) /*!< ADC group injected sequencer rank 3 */ +#define ADC_INJECTED_RANK_4 (LL_ADC_INJ_RANK_4) /*!< ADC group injected sequencer rank 4 */ +/** + * @} + */ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADC_HAL_EC_MULTI_MODE Multimode - Mode + * @{ + */ +#define ADC_MODE_INDEPENDENT (LL_ADC_MULTI_INDEPENDENT) /*!< ADC dual mode disabled (ADC independent mode) */ +#define ADC_DUALMODE_REGSIMULT (LL_ADC_MULTI_DUAL_REG_SIMULT) /*!< ADC dual mode enabled: group regular simultaneous */ +#define ADC_DUALMODE_INTERL (LL_ADC_MULTI_DUAL_REG_INTERL) /*!< ADC dual mode enabled: Combined group regular interleaved */ +#define ADC_DUALMODE_INJECSIMULT (LL_ADC_MULTI_DUAL_INJ_SIMULT) /*!< ADC dual mode enabled: group injected simultaneous */ +#define ADC_DUALMODE_ALTERTRIG (LL_ADC_MULTI_DUAL_INJ_ALTERN) /*!< ADC dual mode enabled: group injected alternate trigger. Works only with external triggers (not internal SW start) */ +#define ADC_DUALMODE_REGSIMULT_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected simultaneous */ +#define ADC_DUALMODE_REGSIMULT_ALTERTRIG (LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) /*!< ADC dual mode enabled: Combined group regular simultaneous + group injected alternate trigger */ +#define ADC_DUALMODE_REGINTERL_INJECSIMULT (LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) /*!< ADC dual mode enabled: Combined group regular interleaved + group injected simultaneous */ + +/** @defgroup ADC_HAL_EC_MULTI_DMA_TRANSFER_RESOLUTION Multimode - DMA transfer mode depending on ADC resolution + * @{ + */ +#define ADC_DMAACCESSMODE_DISABLED (0x00000000U) /*!< DMA multimode disabled: each ADC uses its own DMA channel */ +#define ADC_DMAACCESSMODE_12_10_BITS (ADC_CCR_MDMA_1) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 12 and 10 bits resolution */ +#define ADC_DMAACCESSMODE_8_6_BITS (ADC_CCR_MDMA) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 8 and 6 bits resolution */ +/** + * @} + */ + +/** @defgroup ADC_HAL_EC_MULTI_TWOSMP_DELAY Multimode - Delay between two sampling phases + * @{ + */ +#define ADC_TWOSAMPLINGDELAY_1CYCLE (LL_ADC_MULTI_TWOSMP_DELAY_1CYCLE) /*!< ADC multimode delay between two sampling phases: 1 ADC clock cycle */ +#define ADC_TWOSAMPLINGDELAY_2CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_2CYCLES) /*!< ADC multimode delay between two sampling phases: 2 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_3CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_3CYCLES) /*!< ADC multimode delay between two sampling phases: 3 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_4CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_4CYCLES) /*!< ADC multimode delay between two sampling phases: 4 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_5CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) /*!< ADC multimode delay between two sampling phases: 5 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_6CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) /*!< ADC multimode delay between two sampling phases: 6 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_7CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) /*!< ADC multimode delay between two sampling phases: 7 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_8CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) /*!< ADC multimode delay between two sampling phases: 8 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_9CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) /*!< ADC multimode delay between two sampling phases: 9 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_10CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) /*!< ADC multimode delay between two sampling phases: 10 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_11CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) /*!< ADC multimode delay between two sampling phases: 11 ADC clock cycles */ +#define ADC_TWOSAMPLINGDELAY_12CYCLES (LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) /*!< ADC multimode delay between two sampling phases: 12 ADC clock cycles */ +/** + * @} + */ + +/** + * @} + */ +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** @defgroup ADC_HAL_EC_GROUPS ADC instance - Groups + * @{ + */ +#define ADC_REGULAR_GROUP (LL_ADC_GROUP_REGULAR) /*!< ADC group regular (available on all STM32 devices) */ +#define ADC_INJECTED_GROUP (LL_ADC_GROUP_INJECTED) /*!< ADC group injected (not available on all STM32 devices)*/ +#define ADC_REGULAR_INJECTED_GROUP (LL_ADC_GROUP_REGULAR_INJECTED) /*!< ADC both groups regular and injected */ +/** + * @} + */ + +/** @defgroup ADC_CFGR_fields ADCx CFGR fields + * @{ + */ +#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) +#define ADC_CFGR_FIELDS (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN |\ + ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM |\ + ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN |\ + ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ + ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN |\ + ADC_CFGR_RES | ADC_CFGR_DFSDMCFG | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN) +#else +#define ADC_CFGR_FIELDS (ADC_CFGR_AWD1CH | ADC_CFGR_JAUTO | ADC_CFGR_JAWD1EN |\ + ADC_CFGR_AWD1EN | ADC_CFGR_AWD1SGL | ADC_CFGR_JQM |\ + ADC_CFGR_JDISCEN | ADC_CFGR_DISCNUM | ADC_CFGR_DISCEN |\ + ADC_CFGR_AUTDLY | ADC_CFGR_CONT | ADC_CFGR_OVRMOD |\ + ADC_CFGR_EXTEN | ADC_CFGR_EXTSEL | ADC_CFGR_ALIGN |\ + ADC_CFGR_RES | ADC_CFGR_DMACFG | ADC_CFGR_DMAEN ) +#endif +/** + * @} + */ + +/** @defgroup ADC_SMPR1_fields ADCx SMPR1 fields + * @{ + */ +#if defined(ADC_SMPR1_SMPPLUS) +#define ADC_SMPR1_FIELDS (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 |\ + ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 |\ + ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1 |\ + ADC_SMPR1_SMP0 | ADC_SMPR1_SMPPLUS) +#else +#define ADC_SMPR1_FIELDS (ADC_SMPR1_SMP9 | ADC_SMPR1_SMP8 | ADC_SMPR1_SMP7 |\ + ADC_SMPR1_SMP6 | ADC_SMPR1_SMP5 | ADC_SMPR1_SMP4 |\ + ADC_SMPR1_SMP3 | ADC_SMPR1_SMP2 | ADC_SMPR1_SMP1 |\ + ADC_SMPR1_SMP0) +#endif +/** + * @} + */ + +/** @defgroup ADC_CFGR_fields_2 ADCx CFGR sub fields + * @{ + */ +/* ADC_CFGR fields of parameters that can be updated when no conversion + (neither regular nor injected) is on-going */ +#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) +#define ADC_CFGR_FIELDS_2 ((ADC_CFGR_DMACFG | ADC_CFGR_AUTDLY | ADC_CFGR_DFSDMCFG)) +#else +#define ADC_CFGR_FIELDS_2 ((ADC_CFGR_DMACFG | ADC_CFGR_AUTDLY)) +#endif +/** + * @} + */ + +#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) +/** @defgroup ADC_HAL_EC_REG_DFSDM_TRANSFER ADC group regular - DFSDM transfer of ADC conversion data + * @{ + */ +#define ADC_DFSDM_MODE_DISABLE (0x00000000U) /*!< ADC conversions are not transferred by DFSDM. */ +#define ADC_DFSDM_MODE_ENABLE (LL_ADC_REG_DFSDM_TRANSFER_ENABLE) /*!< ADC conversion data are transfered to DFSDM for post processing. The ADC conversion data format must be 16-bit signed and right aligned, refer to reference manual. DFSDM transfer cannot be used if DMA transfer is enabled. */ +/** + * @} + */ +#endif + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ + +#if defined(ADC_MULTIMODE_SUPPORT) +/** @defgroup ADCEx_Exported_Macro ADC Extended Exported Macros + * @{ + */ + +/** @brief Force ADC instance in multimode mode independant (multimode disable). + * @note This macro must be used only in case of transition from multimode + * to mode independent and in case of unknown previous state, + * to ensure ADC configuration is in mode independent. + * @note Standard way of multimode configuration change is done from + * HAL ADC handle of ADC master using function + * "HAL_ADCEx_MultiModeConfigChannel(..., ADC_MODE_INDEPENDENT)" )". + * Usage of this macro is not the Standard way of multimode + * configuration and can lead to have HAL ADC handles status + * misaligned. Usage of this macro must be limited to cases + * mentionned above. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#define ADC_FORCE_MODE_INDEPENDENT(__HANDLE__) \ + LL_ADC_SetMultimode(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance), LL_ADC_MULTI_INDEPENDENT) + +/** + * @} + */ +#endif /* ADC_MULTIMODE_SUPPORT */ + +/* Private macros ------------------------------------------------------------*/ + +/** @defgroup ADCEx_Private_Macro_internal_HAL_driver ADC Extended Private Macros + * @{ + */ +/* Macro reserved for internal HAL driver usage, not intended to be used in */ +/* code of final user. */ + +/** + * @brief Test if conversion trigger of injected group is software start + * or external trigger. + * @param __HANDLE__ ADC handle. + * @retval SET (software start) or RESET (external trigger). + */ +#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \ + (((__HANDLE__)->Instance->JSQR & ADC_JSQR_JEXTEN) == RESET) + +/** + * @brief Check if conversion is on going on regular or injected groups. + * @param __HANDLE__ ADC handle. + * @retval SET (conversion is on going) or RESET (no conversion is on going). + */ +#define ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED(__HANDLE__) \ + (( (((__HANDLE__)->Instance->CR) & (ADC_CR_ADSTART | ADC_CR_JADSTART)) == RESET \ + ) ? RESET : SET) + +/** + * @brief Check if conversion is on going on injected group. + * @param __HANDLE__ ADC handle. + * @retval SET (conversion is on going) or RESET (no conversion is on going). + */ +#define ADC_IS_CONVERSION_ONGOING_INJECTED(__HANDLE__) \ + (LL_ADC_INJ_IsConversionOngoing((__HANDLE__)->Instance)) + +/** + * @brief Check whether or not ADC is independent. + * @param __HANDLE__ ADC handle. + * @note When multimode feature is not available, the macro always returns SET. + * @retval SET (ADC is independent) or RESET (ADC is not). + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_IS_INDEPENDENT(__HANDLE__) \ + ( ( ( ((__HANDLE__)->Instance) == ADC3) \ + )? \ + SET \ + : \ + RESET \ + ) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_IS_INDEPENDENT(__HANDLE__) (SET) +#endif + +/** + * @brief Set the selected injected Channel rank. + * @param __CHANNELNB__ Channel number. + * @param __RANKNB__ Rank number. + * @retval None + */ +#define ADC_JSQR_RK(__CHANNELNB__, __RANKNB__) ((((__CHANNELNB__) & ADC_CHANNEL_ID_NUMBER_MASK) >> ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) << ((__RANKNB__) & ADC_INJ_RANK_ID_JSQR_MASK)) + +/** + * @brief Configure ADC injected context queue + * @param __INJECT_CONTEXT_QUEUE_MODE__ Injected context queue mode. + * @retval None + */ +#define ADC_CFGR_INJECT_CONTEXT_QUEUE(__INJECT_CONTEXT_QUEUE_MODE__) ((__INJECT_CONTEXT_QUEUE_MODE__) << ADC_CFGR_JQM_Pos) + +/** + * @brief Configure ADC discontinuous conversion mode for injected group + * @param __INJECT_DISCONTINUOUS_MODE__ Injected discontinuous mode. + * @retval None + */ +#define ADC_CFGR_INJECT_DISCCONTINUOUS(__INJECT_DISCONTINUOUS_MODE__) ((__INJECT_DISCONTINUOUS_MODE__) << ADC_CFGR_JDISCEN_Pos) + +/** + * @brief Configure ADC discontinuous conversion mode for regular group + * @param __REG_DISCONTINUOUS_MODE__ Regular discontinuous mode. + * @retval None + */ +#define ADC_CFGR_REG_DISCONTINUOUS(__REG_DISCONTINUOUS_MODE__) ((__REG_DISCONTINUOUS_MODE__) << ADC_CFGR_DISCEN_Pos) + +/** + * @brief Configure the number of discontinuous conversions for regular group. + * @param __NBR_DISCONTINUOUS_CONV__ Number of discontinuous conversions. + * @retval None + */ +#define ADC_CFGR_DISCONTINUOUS_NUM(__NBR_DISCONTINUOUS_CONV__) (((__NBR_DISCONTINUOUS_CONV__) - 1) << ADC_CFGR_DISCNUM_Pos) + +/** + * @brief Configure the ADC auto delay mode. + * @param __AUTOWAIT__ Auto delay bit enable or disable. + * @retval None + */ +#define ADC_CFGR_AUTOWAIT(__AUTOWAIT__) ((__AUTOWAIT__) << ADC_CFGR_AUTDLY_Pos) + +/** + * @brief Configure ADC continuous conversion mode. + * @param __CONTINUOUS_MODE__ Continuous mode. + * @retval None + */ +#define ADC_CFGR_CONTINUOUS(__CONTINUOUS_MODE__) ((__CONTINUOUS_MODE__) << ADC_CFGR_CONT_Pos) + +/** + * @brief Configure the ADC DMA continuous request. + * @param __DMACONTREQ_MODE__ DMA continuous request mode. + * @retval None + */ +#define ADC_CFGR_DMACONTREQ(__DMACONTREQ_MODE__) ((__DMACONTREQ_MODE__) << ADC_CFGR_DMACFG_Pos) + +/** + * @brief Configure the channel number into offset OFRx register. + * @param __CHANNEL__ ADC Channel. + * @retval None + */ +#define ADC_OFR_CHANNEL(__CHANNEL__) ((__CHANNEL__) << ADC_OFR1_OFFSET1_CH_Pos) + +/** + * @brief Configure the channel number into differential mode selection register. + * @param __CHANNEL__ ADC Channel. + * @retval None + */ +#define ADC_DIFSEL_CHANNEL(__CHANNEL__) (1U << (__CHANNEL__)) + +/** + * @brief Configure calibration factor in differential mode to be set into calibration register. + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval None + */ +#define ADC_CALFACT_DIFF_SET(__CALIBRATION_FACTOR__) (((__CALIBRATION_FACTOR__) & (ADC_CALFACT_CALFACT_D_Pos >> ADC_CALFACT_CALFACT_D_Pos) ) << ADC_CALFACT_CALFACT_D_Pos) + +/** + * @brief Calibration factor in differential mode to be retrieved from calibration register. + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval None + */ +#define ADC_CALFACT_DIFF_GET(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) >> ADC_CALFACT_CALFACT_D_Pos) + +/** + * @brief Configure the analog watchdog high threshold into registers TR1, TR2 or TR3. + * @param __THRESHOLD__ Threshold value. + * @retval None + */ +#define ADC_TRX_HIGHTHRESHOLD(__THRESHOLD__) ((__THRESHOLD__) << 16) + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Configure the ADC DMA continuous request for ADC multimode. + * @param __DMACONTREQ_MODE__ DMA continuous request mode. + * @retval None + */ +#define ADC_CCR_MULTI_DMACONTREQ(__DMACONTREQ_MODE__) ((__DMACONTREQ_MODE__) << ADC_CCR_DMACFG_Pos) +#endif /* ADC_MULTIMODE_SUPPORT */ +/** + * @brief Enable the ADC peripheral. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#define ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN) + +/** + * @brief Verification of hardware constraints before ADC can be enabled. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled) + */ +#define ADC_ENABLING_CONDITIONS(__HANDLE__) \ + (( ( ((__HANDLE__)->Instance->CR) & \ + (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | \ + ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \ + ) == RESET \ + ) ? SET : RESET) + +/** + * @brief Disable the ADC peripheral. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#define ADC_DISABLE(__HANDLE__) \ + do{ \ + (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \ + __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \ + } while(0) + +/** + * @brief Verification of hardware constraints before ADC can be disabled. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled) + */ +#define ADC_DISABLING_CONDITIONS(__HANDLE__) \ + (( ( ((__HANDLE__)->Instance->CR) & \ + (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \ + ) ? SET : RESET) + +/** + * @brief Shift the offset with respect to the selected ADC resolution. + * @note Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). + * @param __HANDLE__ ADC handle + * @param __OFFSET__ Value to be shifted + * @retval None + */ +#define ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, __OFFSET__) \ + ((__OFFSET__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2)) + + +/** + * @brief Shift the AWD1 threshold with respect to the selected ADC resolution. + * @note Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0. + * If resolution 12 bits, no shift. + * If resolution 10 bits, shift of 2 ranks on the left. + * If resolution 8 bits, shift of 4 ranks on the left. + * If resolution 6 bits, shift of 6 ranks on the left. + * Therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2)). + * @param __HANDLE__ ADC handle + * @param __THRESHOLD__ Value to be shifted + * @retval None + */ +#define ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ((__THRESHOLD__) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2)) + +/** + * @brief Shift the AWD2 and AWD3 threshold with respect to the selected ADC resolution. + * @note Thresholds have to be left-aligned on bit 7. + * If resolution 12 bits, shift of 4 ranks on the right (the 4 LSB are discarded). + * If resolution 10 bits, shift of 2 ranks on the right (the 2 LSB are discarded). + * If resolution 8 bits, no shift. + * If resolution 6 bits, shift of 2 ranks on the left (the 2 LSB are set to 0). + * @param __HANDLE__ ADC handle + * @param __THRESHOLD__ Value to be shifted + * @retval None + */ +#define ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, __THRESHOLD__) \ + ( ((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0) ? \ + ((__THRESHOLD__) >> (4- ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))) : \ + (__THRESHOLD__) << 2 ) + +/** + * @brief Report Master Instance. + * @param __HANDLE__ ADC handle. + * @note Return same instance if ADC of input handle is independent ADC or if + * multimode feature is not available. + * @retval Master Instance + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_MASTER_REGISTER(__HANDLE__) \ + ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC3)) \ + )? \ + ((__HANDLE__)->Instance) \ + : \ + (ADC1) \ + ) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_MASTER_REGISTER(__HANDLE__) ((__HANDLE__)->Instance) +#endif + +/** + * @brief Clear Common Control Register. + * @param __HANDLE__ ADC handle. + * @retval None + */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, ADC_CCR_CKMODE | \ + ADC_CCR_PRESC | \ + ADC_CCR_VBATEN | \ + ADC_CCR_TSEN | \ + ADC_CCR_VREFEN | \ + ADC_CCR_MDMA | \ + ADC_CCR_DMACFG | \ + ADC_CCR_DELAY | \ + ADC_CCR_DUAL ) +#else +#define ADC_CLEAR_COMMON_CONTROL_REGISTER(__HANDLE__) CLEAR_BIT(__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance)->CCR, ADC_CCR_CKMODE | \ + ADC_CCR_PRESC | \ + ADC_CCR_VBATEN | \ + ADC_CCR_TSEN | \ + ADC_CCR_VREFEN ) + +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Check whether or not dual conversions are enabled. + * @param __HANDLE__ ADC handle. + * @note Return RESET if ADC of input handle is independent ADC or if multimode feature is not available. + * @retval SET (dual regular conversions are enabled) or RESET (ADC is independent or no dual regular conversions are enabled) + */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define ADC_IS_DUAL_CONVERSION_ENABLE(__HANDLE__) \ + ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \ + )? \ + ( ((ADC123_COMMON->CCR & ADC_CCR_DUAL) != ADC_MODE_INDEPENDENT) ) \ + : \ + RESET \ + ) +#else +#define ADC_IS_DUAL_CONVERSION_ENABLE(__HANDLE__) (RESET) +#endif + +/** + * @brief Check whether or not dual regular conversions are enabled. + * @param __HANDLE__ ADC handle. + * @note Return RESET if ADC of input handle is independent ADC or if multimode feature is not available. + * @retval SET (dual regular conversions are enabled) or RESET (ADC is independent or no dual regular conversions are enabled) + */ +#if defined(ADC_MULTIMODE_SUPPORT) +#define ADC_IS_DUAL_REGULAR_CONVERSION_ENABLE(__HANDLE__) \ + ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \ + )? \ + ( (((__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance))->CCR & ADC_CCR_DUAL) != ADC_MODE_INDEPENDENT) && \ + (((__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance))->CCR & ADC_CCR_DUAL) != ADC_DUALMODE_INJECSIMULT) && \ + (((__LL_ADC_COMMON_INSTANCE((__HANDLE__)->Instance))->CCR & ADC_CCR_DUAL) != ADC_DUALMODE_ALTERTRIG) ) \ + : \ + RESET \ + ) +#else +#define ADC_IS_DUAL_REGULAR_CONVERSION_ENABLE(__HANDLE__) (RESET) +#endif + +/** + * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode or multimode with handle of ADC master. + * @param __HANDLE__ ADC handle. + * @note Return SET if multimode feature is not available. + * @retval SET (non-multimode or Master handle) or RESET (handle of Slave ADC in multimode) + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == ADC1) || ((__HANDLE__)->Instance == ADC3) \ + )? \ + SET \ + : \ + ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == RESET) \ + ) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) (SET) +#endif + +/** + * @brief Ensure ADC Instance is Independent or Master, or is not Slave ADC with dual regular conversions enabled. + * @param __HANDLE__ ADC handle. + * @note Return SET if multimode feature is not available. + * @retval SET (Independent or Master, or Slave without dual regular conversions enabled) or RESET (Slave ADC with dual regular conversions enabled) + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_INDEPENDENT_OR_NONMULTIMODEREGULAR_SLAVE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == ADC1) || ((__HANDLE__)->Instance == ADC3) \ + )? \ + SET \ + : \ + ( ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_MODE_INDEPENDENT) || \ + ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_DUALMODE_INJECSIMULT) || \ + ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_DUALMODE_ALTERTRIG) )) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined( STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_INDEPENDENT_OR_NONMULTIMODEREGULAR_SLAVE(__HANDLE__) (SET) +#endif + +/** + * @brief Ensure ADC Instance is Independent or Master, or is not Slave ADC with dual injected conversions enabled. + * @param __HANDLE__ ADC handle. + * @note Return SET if multimode feature is not available. + * @retval SET (non-multimode or Master, or Slave without dual injected conversions enabled) or RESET (Slave ADC with dual injected conversions enabled) + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_INDEPENDENT_OR_NONMULTIMODEINJECTED_SLAVE(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == ADC1) || ((__HANDLE__)->Instance == ADC3) \ + )? \ + SET \ + : \ + ( ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_MODE_INDEPENDENT) || \ + ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_DUALMODE_REGSIMULT) || \ + ((ADC123_COMMON->CCR & ADC_CCR_DUAL) == ADC_DUALMODE_INTERL) )) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_INDEPENDENT_OR_NONMULTIMODEINJECTED_SLAVE(__HANDLE__) (SET) +#endif + +/** + * @brief Verification of ADC state: enabled or disabled, directly checked on instance as input parameter. + * @param __INSTANCE__ ADC instance. + * @retval SET (ADC enabled) or RESET (ADC disabled) + */ +#define ADC_INSTANCE_IS_ENABLED(__INSTANCE__) \ + (( ((((__INSTANCE__)->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \ + ((((__INSTANCE__)->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) \ + ) ? SET : RESET) + +/** + * @brief Verification of enabled/disabled status of ADCs other than that associated to the input parameter handle. + * @param __HANDLE__ ADC handle. + * @retval SET (at least one other ADC is enabled) or RESET (no other ADC is enabled, all other ADCs are disabled) + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_ANY_OTHER_ENABLED(__HANDLE__) \ + ( ( ((__HANDLE__)->Instance == ADC1) \ + )? \ + (ADC_INSTANCE_IS_ENABLED(ADC2)) || (ADC_INSTANCE_IS_ENABLED(ADC3)) \ + : \ + ( ( ((__HANDLE__)->Instance == ADC2) \ + )? \ + (ADC_INSTANCE_IS_ENABLED(ADC1)) || (ADC_INSTANCE_IS_ENABLED(ADC3)) \ + : \ + ADC_INSTANCE_IS_ENABLED(ADC1)) || (ADC_INSTANCE_IS_ENABLED(ADC2)) \ + ) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_ANY_OTHER_ENABLED(__HANDLE__) (RESET) +#endif + +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +/** + * @brief Set handle instance of the ADC slave associated to the ADC master. + * @param __HANDLE_MASTER__ ADC master handle. + * @param __HANDLE_SLAVE__ ADC slave handle. + * @note if __HANDLE_MASTER__ is the handle of a slave ADC or an independent ADC, __HANDLE_SLAVE__ instance is set to NULL. + * @retval None + */ +#define ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \ + ( (((__HANDLE_MASTER__)->Instance == ADC1)) ? ((__HANDLE_SLAVE__)->Instance = ADC2) : ((__HANDLE_SLAVE__)->Instance = NULL) ) +#endif /* defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */ + +/** + * @brief Check whether or not multimode is configured in DMA mode. + * @param __HANDLE__ ADC handle. + * @note Return RESET if multimode feature is not available. + * @retval SET (multimode is configured in DMA mode) or RESET (DMA multimode is disabled) + */ +#if defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define ADC_MULTIMODE_DMA_ENABLED(__HANDLE__) \ + ((READ_BIT(ADC123_COMMON->CCR, ADC_CCR_MDMA) == ADC_DMAACCESSMODE_12_10_BITS) \ + || (READ_BIT(ADC123_COMMON->CCR, ADC_CCR_MDMA) == ADC_DMAACCESSMODE_8_6_BITS)) +#elif defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define ADC_MULTIMODE_DMA_ENABLED(__HANDLE__) (RESET) +#endif + +/** + * @brief Verify the ADC instance connected to the temperature sensor. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/* The temperature sensor measurement path (channel 17) is available on ADC1 */ +#define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +/* The temperature sensor measurement path (channel 17) is available on ADC1 and ADC3 */ +#define ADC_TEMPERATURE_SENSOR_INSTANCE(__HANDLE__) ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC3)) +#endif + +/** + * @brief Verify the ADC instance connected to the battery voltage VBAT. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +/* The battery voltage measurement path (channel 18) is available on ADC1 */ +#define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +/* The battery voltage measurement path (channel 18) is available on ADC1 and ADC3 */ +#define ADC_BATTERY_VOLTAGE_INSTANCE(__HANDLE__) ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC3)) +#endif + +/** + * @brief Verify the ADC instance connected to the internal voltage reference VREFINT. + * @param __HANDLE__ ADC handle. + * @retval SET (ADC instance is valid) or RESET (ADC instance is invalid) + */ +/* The internal voltage reference VREFINT measurement path (channel 0) is available on ADC1 */ +#define ADC_VREFINT_INSTANCE(__HANDLE__) (((__HANDLE__)->Instance) == ADC1) + +/** + * @brief Verify the length of scheduled injected conversions group. + * @param __LENGTH__ number of programmed conversions. + * @retval SET (__LENGTH__ is within the maximum number of possible programmable injected conversions) or RESET (__LENGTH__ is null or too large) + */ +#define IS_ADC_INJECTED_NB_CONV(__LENGTH__) (((__LENGTH__) >= (1U)) && ((__LENGTH__) <= (4U))) + +/** + * @brief Calibration factor size verification (7 bits maximum). + * @param __CALIBRATION_FACTOR__ Calibration factor value. + * @retval SET (__CALIBRATION_FACTOR__ is within the authorized size) or RESET (__CALIBRATION_FACTOR__ is too large) + */ +#define IS_ADC_CALFACT(__CALIBRATION_FACTOR__) ((__CALIBRATION_FACTOR__) <= (0x7FU)) + + +/** + * @brief Verify the ADC channel setting. + * @param __HANDLE__ ADC handle. + * @param __CHANNEL__ programmed ADC channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) ((((__HANDLE__)->Instance) == ADC1) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) || \ + ((__CHANNEL__) == ADC_CHANNEL_16) || \ + ((__CHANNEL__) == ADC_CHANNEL_17) || \ + ((__CHANNEL__) == ADC_CHANNEL_18) || \ + ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2))) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) +#define IS_ADC_CHANNEL(__HANDLE__, __CHANNEL__) (((((__HANDLE__)->Instance) == ADC1) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) || \ + ((__CHANNEL__) == ADC_CHANNEL_16) || \ + ((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \ + ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == ADC_CHANNEL_VBAT))) || \ + ((((__HANDLE__)->Instance) == ADC2) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) || \ + ((__CHANNEL__) == ADC_CHANNEL_16) || \ + ((__CHANNEL__) == ADC_CHANNEL_17) || \ + ((__CHANNEL__) == ADC_CHANNEL_18) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC2) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC2))) || \ + ((((__HANDLE__)->Instance) == ADC3) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) || \ + ((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \ + ((__CHANNEL__) == ADC_CHANNEL_VBAT) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH1_ADC3) || \ + ((__CHANNEL__) == ADC_CHANNEL_DAC1CH2_ADC3) ))) +#endif + +/** + * @brief Verify the ADC channel setting in differential mode. + * @param __HANDLE__ ADC handle. + * @param __CHANNEL__ programmed ADC channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#if defined (STM32L431xx) || defined (STM32L432xx) || defined (STM32L433xx) || defined (STM32L442xx) || defined (STM32L443xx) || defined (STM32L451xx) || defined (STM32L452xx) || defined (STM32L462xx) || defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) +#define IS_ADC_DIFF_CHANNEL(__HANDLE__, __CHANNEL__) (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15) ) +#elif defined (STM32L471xx) || defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || defined (STM32L4A6xx) + /* For ADC1 and ADC2, channels 1 to 15 are available in differential mode, + channels 0, 16 to 18 can be only used in single-ended mode. + For ADC3, channels 1 to 3 and 6 to 12 are available in differential mode, + channels 4, 5 and 13 to 18 can only be used in single-ended mode. */ +#define IS_ADC_DIFF_CHANNEL(__HANDLE__, __CHANNEL__) ((((((__HANDLE__)->Instance) == ADC1) || \ + (((__HANDLE__)->Instance) == ADC2)) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_4) || \ + ((__CHANNEL__) == ADC_CHANNEL_5) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) || \ + ((__CHANNEL__) == ADC_CHANNEL_13) || \ + ((__CHANNEL__) == ADC_CHANNEL_14) || \ + ((__CHANNEL__) == ADC_CHANNEL_15))) || \ + ((((__HANDLE__)->Instance) == ADC3) && \ + (((__CHANNEL__) == ADC_CHANNEL_1) || \ + ((__CHANNEL__) == ADC_CHANNEL_2) || \ + ((__CHANNEL__) == ADC_CHANNEL_3) || \ + ((__CHANNEL__) == ADC_CHANNEL_6) || \ + ((__CHANNEL__) == ADC_CHANNEL_7) || \ + ((__CHANNEL__) == ADC_CHANNEL_8) || \ + ((__CHANNEL__) == ADC_CHANNEL_9) || \ + ((__CHANNEL__) == ADC_CHANNEL_10) || \ + ((__CHANNEL__) == ADC_CHANNEL_11) || \ + ((__CHANNEL__) == ADC_CHANNEL_12) ))) +#endif + +/** + * @brief Verify the ADC single-ended input or differential mode setting. + * @param __SING_DIFF__ programmed channel setting. + * @retval SET (__SING_DIFF__ is valid) or RESET (__SING_DIFF__ is invalid) + */ +#define IS_ADC_SINGLE_DIFFERENTIAL(__SING_DIFF__) (((__SING_DIFF__) == ADC_SINGLE_ENDED) || \ + ((__SING_DIFF__) == ADC_DIFFERENTIAL_ENDED) ) + +/** + * @brief Verify the ADC offset management setting. + * @param __OFFSET_NUMBER__ ADC offset management. + * @retval SET (__OFFSET_NUMBER__ is valid) or RESET (__OFFSET_NUMBER__ is invalid) + */ +#define IS_ADC_OFFSET_NUMBER(__OFFSET_NUMBER__) (((__OFFSET_NUMBER__) == ADC_OFFSET_NONE) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_1) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_2) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_3) || \ + ((__OFFSET_NUMBER__) == ADC_OFFSET_4) ) + +/** + * @brief Verify the ADC injected channel setting. + * @param __CHANNEL__ programmed ADC injected channel. + * @retval SET (__CHANNEL__ is valid) or RESET (__CHANNEL__ is invalid) + */ +#define IS_ADC_INJECTED_RANK(__CHANNEL__) (((__CHANNEL__) == ADC_INJECTED_RANK_1) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_2) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_3) || \ + ((__CHANNEL__) == ADC_INJECTED_RANK_4) ) + +/** + * @brief Verify the ADC injected conversions external trigger. + * @param __HANDLE__ ADC handle. + * @param __INJTRIG__ programmed ADC injected conversions external trigger. + * @retval SET (__INJTRIG__ is a valid value) or RESET (__INJTRIG__ is invalid) + */ +#define IS_ADC_EXTTRIGINJEC(__HANDLE__, __INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_CC4) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T2_CC1) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC4) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T4_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_EXT_IT15) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_CC4) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T1_TRGO2) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T8_TRGO2) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC3) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T3_CC1) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T6_TRGO) || \ + ((__INJTRIG__) == ADC_EXTERNALTRIGINJEC_T15_TRGO) || \ + ((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START) ) + +/** + * @brief Verify the ADC edge trigger setting for injected group. + * @param __EDGE__ programmed ADC edge trigger setting. + * @retval SET (__EDGE__ is a valid value) or RESET (__EDGE__ is invalid) + */ +#define IS_ADC_EXTTRIGINJEC_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \ + ((__EDGE__) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) ) + +#if defined(ADC_MULTIMODE_SUPPORT) +/** + * @brief Verify the ADC multimode setting. + * @param __MODE__ programmed ADC multimode setting. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_MULTIMODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ + ((__MODE__) == ADC_DUALMODE_REGINTERL_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_INJECSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_REGSIMULT) || \ + ((__MODE__) == ADC_DUALMODE_INTERL) || \ + ((__MODE__) == ADC_DUALMODE_ALTERTRIG) ) + +/** + * @brief Verify the ADC multimode DMA access setting. + * @param __MODE__ programmed ADC multimode DMA access setting. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_DMA_ACCESS_MULTIMODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \ + ((__MODE__) == ADC_DMAACCESSMODE_12_10_BITS) || \ + ((__MODE__) == ADC_DMAACCESSMODE_8_6_BITS) ) + +/** + * @brief Verify the ADC multimode delay setting. + * @param __DELAY__ programmed ADC multimode delay setting. + * @retval SET (__DELAY__ is a valid value) or RESET (__DELAY__ is invalid) + */ +#define IS_ADC_SAMPLING_DELAY(__DELAY__) (((__DELAY__) == ADC_TWOSAMPLINGDELAY_1CYCLE) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_2CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_3CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_4CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ + ((__DELAY__) == ADC_TWOSAMPLINGDELAY_12CYCLES) ) +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @brief Verify the ADC analog watchdog setting. + * @param __WATCHDOG__ programmed ADC analog watchdog setting. + * @retval SET (__WATCHDOG__ is valid) or RESET (__WATCHDOG__ is invalid) + */ +#define IS_ADC_ANALOG_WATCHDOG_NUMBER(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_1) || \ + ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_2) || \ + ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_3) ) + +/** + * @brief Verify the ADC analog watchdog mode setting. + * @param __WATCHDOG_MODE__ programmed ADC analog watchdog mode setting. + * @retval SET (__WATCHDOG_MODE__ is valid) or RESET (__WATCHDOG_MODE__ is invalid) + */ +#define IS_ADC_ANALOG_WATCHDOG_MODE(__WATCHDOG_MODE__) (((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_NONE) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REG) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ + ((__WATCHDOG_MODE__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) ) + +/** + * @brief Verify the ADC conversion (regular or injected or both). + * @param __CONVERSION__ ADC conversion group. + * @retval SET (__CONVERSION__ is valid) or RESET (__CONVERSION__ is invalid) + */ +#define IS_ADC_CONVERSION_GROUP(__CONVERSION__) (((__CONVERSION__) == ADC_REGULAR_GROUP) || \ + ((__CONVERSION__) == ADC_INJECTED_GROUP) || \ + ((__CONVERSION__) == ADC_REGULAR_INJECTED_GROUP) ) + +/** + * @brief Verify the ADC event type. + * @param __EVENT__ ADC event. + * @retval SET (__EVENT__ is valid) or RESET (__EVENT__ is invalid) + */ +#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_EOSMP_EVENT) || \ + ((__EVENT__) == ADC_AWD_EVENT) || \ + ((__EVENT__) == ADC_AWD2_EVENT) || \ + ((__EVENT__) == ADC_AWD3_EVENT) || \ + ((__EVENT__) == ADC_OVR_EVENT) || \ + ((__EVENT__) == ADC_JQOVF_EVENT) ) + +/** + * @brief Verify the ADC oversampling ratio. + * @param __RATIO__ programmed ADC oversampling ratio. + * @retval SET (__RATIO__ is a valid value) or RESET (__RATIO__ is invalid) + */ +#define IS_ADC_OVERSAMPLING_RATIO(__RATIO__) (((__RATIO__) == ADC_OVERSAMPLING_RATIO_2 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_4 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_8 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_16 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_32 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_64 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_128 ) || \ + ((__RATIO__) == ADC_OVERSAMPLING_RATIO_256 )) + +/** + * @brief Verify the ADC oversampling shift. + * @param __SHIFT__ programmed ADC oversampling shift. + * @retval SET (__SHIFT__ is a valid value) or RESET (__SHIFT__ is invalid) + */ +#define IS_ADC_RIGHT_BIT_SHIFT(__SHIFT__) (((__SHIFT__) == ADC_RIGHTBITSHIFT_NONE) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_1 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_2 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_3 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_4 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_5 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_6 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_7 ) || \ + ((__SHIFT__) == ADC_RIGHTBITSHIFT_8 )) + +/** + * @brief Verify the ADC oversampling triggered mode. + * @param __MODE__ programmed ADC oversampling triggered mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_TRIGGERED_OVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_TRIGGEREDMODE_SINGLE_TRIGGER) || \ + ((__MODE__) == ADC_TRIGGEREDMODE_MULTI_TRIGGER) ) + +/** + * @brief Verify the ADC oversampling regular conversion resumed or continued mode. + * @param __MODE__ programmed ADC oversampling regular conversion resumed or continued mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_ADC_REGOVERSAMPLING_MODE(__MODE__) (((__MODE__) == ADC_REGOVERSAMPLING_CONTINUED_MODE) || \ + ((__MODE__) == ADC_REGOVERSAMPLING_RESUMED_MODE) ) + +/** + * @brief Verify the DFSDM mode configuration. + * @param __HANDLE__ ADC handle. + * @note When DMSDFM configuration is not supported, the macro systematically reports SET. For + * this reason, the input parameter is the ADC handle and not the configuration parameter + * directly. + * @retval SET (DFSDM mode configuration is valid) or RESET (DFSDM mode configuration is invalid) + */ +#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) +#define IS_ADC_DFSDMCFG_MODE(__HANDLE__) (((__HANDLE__)->Init.DFSDMConfig == ADC_DFSDM_MODE_DISABLE) || \ + ((__HANDLE__)->Init.DFSDMConfig == ADC_DFSDM_MODE_ENABLE) ) +#else +#define IS_ADC_DFSDMCFG_MODE(__HANDLE__) (SET) +#endif + +/** + * @brief Return the DFSDM configuration mode. + * @param __HANDLE__ ADC handle. + * @note When DMSDFM configuration is not supported, the macro systematically reports 0x0 (i.e disabled). + * For this reason, the input parameter is the ADC handle and not the configuration parameter + * directly. + * @retval DFSDM configuration mode + */ +#if defined(ADC_CFGR_DFSDMCFG) &&defined(DFSDM1_Channel0) +#define ADC_CFGR_DFSDM(__HANDLE__) ((__HANDLE__)->Init.DFSDMConfig) +#else +#define ADC_CFGR_DFSDM(__HANDLE__) (0x0) +#endif + +/** + * @} + */ + + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup ADCEx_Exported_Functions + * @{ + */ + +/** @addtogroup ADCEx_Exported_Functions_Group1 + * @{ + */ +/* IO operation functions *****************************************************/ + +/* ADC calibration */ +HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc, uint32_t SingleDiff); +uint32_t HAL_ADCEx_Calibration_GetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff); +HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor); + +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); + +/* Non-blocking mode: Interruption */ +HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); + +#if defined(ADC_MULTIMODE_SUPPORT) +/* ADC multimode */ +HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length); +HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef *hadc); +uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef *hadc); +#endif /* ADC_MULTIMODE_SUPPORT */ + +/* ADC retrieve conversion value intended to be used with polling or interruption */ +uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); + +/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */ +void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); +void HAL_ADCEx_InjectedQueueOverflowCallback(ADC_HandleTypeDef* hadc); +void HAL_ADCEx_LevelOutOfWindow2Callback(ADC_HandleTypeDef* hadc); +void HAL_ADCEx_LevelOutOfWindow3Callback(ADC_HandleTypeDef* hadc); +void HAL_ADCEx_EndOfSamplingCallback(ADC_HandleTypeDef* hadc); + +/* ADC group regular conversions stop */ +HAL_StatusTypeDef HAL_ADCEx_RegularStop(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_IT(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_RegularStop_DMA(ADC_HandleTypeDef* hadc); +#if defined(ADC_MULTIMODE_SUPPORT) +HAL_StatusTypeDef HAL_ADCEx_RegularMultiModeStop_DMA(ADC_HandleTypeDef* hadc); +#endif /* ADC_MULTIMODE_SUPPORT */ + +/** + * @} + */ + +/** @addtogroup ADCEx_Exported_Functions_Group2 + * @{ + */ +/* Peripheral Control functions ***********************************************/ +HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); +#if defined(ADC_MULTIMODE_SUPPORT) +HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode); +#endif /* ADC_MULTIMODE_SUPPORT */ +HAL_StatusTypeDef HAL_ADCEx_EnableInjectedQueue(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableInjectedQueue(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_DisableVoltageRegulator(ADC_HandleTypeDef* hadc); +HAL_StatusTypeDef HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef* hadc); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_ADC_EX_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/