The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_sd.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 161:aa5281ff4a02
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_L432KC/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_sd.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,803 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_sd.h + * @author MCD Application Team + * @brief Header file of SD HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_SD_H +#define __STM32L4xx_HAL_SD_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(SDMMC1) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_ll_sdmmc.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @addtogroup SD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SD_Exported_Types SD Exported Types + * @{ + */ + +/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */ + HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */ + HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */ + HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */ + HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */ + HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */ + HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfert State */ + HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */ +}HAL_SD_StateTypeDef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure + * @{ + */ +typedef enum +{ + HAL_SD_CARD_READY = ((uint32_t)0x00000001U), /*!< Card state is ready */ + HAL_SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002U), /*!< Card is in identification state */ + HAL_SD_CARD_STANDBY = ((uint32_t)0x00000003U), /*!< Card is in standby state */ + HAL_SD_CARD_TRANSFER = ((uint32_t)0x00000004U), /*!< Card is in transfer state */ + HAL_SD_CARD_SENDING = ((uint32_t)0x00000005U), /*!< Card is sending an operation */ + HAL_SD_CARD_RECEIVING = ((uint32_t)0x00000006U), /*!< Card is receiving operation information */ + HAL_SD_CARD_PROGRAMMING = ((uint32_t)0x00000007U), /*!< Card is in programming state */ + HAL_SD_CARD_DISCONNECTED = ((uint32_t)0x00000008U), /*!< Card is disconnected */ + HAL_SD_CARD_ERROR = ((uint32_t)0x000000FFU) /*!< Card response Error */ +}HAL_SD_CardStateTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition + * @{ + */ +#define SD_InitTypeDef SDMMC_InitTypeDef +#define SD_TypeDef SDMMC_TypeDef + +/** + * @brief SD Card Information Structure definition + */ +typedef struct +{ + uint32_t CardType; /*!< Specifies the card Type */ + + uint32_t CardVersion; /*!< Specifies the card version */ + + uint32_t Class; /*!< Specifies the class of the card class */ + + uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */ + + uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */ + + uint32_t BlockSize; /*!< Specifies one block size in bytes */ + + uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */ + + uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */ + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) + + uint32_t CardSpeed; /*!< Specifies the card Speed */ + +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +}HAL_SD_CardInfoTypeDef; + +/** + * @brief SD handle Structure definition + */ +typedef struct +{ + SD_TypeDef *Instance; /*!< SD registers base address */ + + SD_InitTypeDef Init; /*!< SD required parameters */ + + HAL_LockTypeDef Lock; /*!< SD locking object */ + + uint32_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */ + + uint32_t TxXferSize; /*!< SD Tx Transfer size */ + + uint32_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */ + + uint32_t RxXferSize; /*!< SD Rx Transfer size */ + + __IO uint32_t Context; /*!< SD transfer context */ + + __IO HAL_SD_StateTypeDef State; /*!< SD card State */ + + __IO uint32_t ErrorCode; /*!< SD Card Error codes */ + +#if !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx) + + DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ + +#endif /* !STM32L4R5xx && !STM32L4R7xx && !STM32L4R9xx && !STM32L4S5xx && !STM32L4S7xx && !STM32L4S9xx */ + HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */ + + uint32_t CSD[4]; /*!< SD card specific data table */ + + uint32_t CID[4]; /*!< SD card identification number table */ + +}SD_HandleTypeDef; + +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register + * @{ + */ +typedef struct +{ + __IO uint8_t CSDStruct; /*!< CSD structure */ + __IO uint8_t SysSpecVersion; /*!< System specification version */ + __IO uint8_t Reserved1; /*!< Reserved */ + __IO uint8_t TAAC; /*!< Data read access time 1 */ + __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ + __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ + __IO uint16_t CardComdClasses; /*!< Card command classes */ + __IO uint8_t RdBlockLen; /*!< Max. read data block length */ + __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ + __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ + __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ + __IO uint8_t DSRImpl; /*!< DSR implemented */ + __IO uint8_t Reserved2; /*!< Reserved */ + __IO uint32_t DeviceSize; /*!< Device Size */ + __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ + __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ + __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ + __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ + __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ + __IO uint8_t EraseGrSize; /*!< Erase group size */ + __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ + __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ + __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ + __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ + __IO uint8_t WrSpeedFact; /*!< Write speed factor */ + __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ + __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ + __IO uint8_t Reserved3; /*!< Reserved */ + __IO uint8_t ContentProtectAppli; /*!< Content protection application */ + __IO uint8_t FileFormatGrouop; /*!< File format group */ + __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ + __IO uint8_t PermWrProtect; /*!< Permanent write protection */ + __IO uint8_t TempWrProtect; /*!< Temporary write protection */ + __IO uint8_t FileFormat; /*!< File format */ + __IO uint8_t ECC; /*!< ECC code */ + __IO uint8_t CSD_CRC; /*!< CSD CRC */ + __IO uint8_t Reserved4; /*!< Always 1 */ + +}HAL_SD_CardCSDTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register + * @{ + */ +typedef struct +{ + __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ + __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ + __IO uint32_t ProdName1; /*!< Product Name part1 */ + __IO uint8_t ProdName2; /*!< Product Name part2 */ + __IO uint8_t ProdRev; /*!< Product Revision */ + __IO uint32_t ProdSN; /*!< Product Serial Number */ + __IO uint8_t Reserved1; /*!< Reserved1 */ + __IO uint16_t ManufactDate; /*!< Manufacturing Date */ + __IO uint8_t CID_CRC; /*!< CID CRC */ + __IO uint8_t Reserved2; /*!< Always 1 */ + +}HAL_SD_CardCIDTypedef; +/** + * @} + */ + +/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13 + * @{ + */ +typedef struct +{ + __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */ + __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */ + __IO uint16_t CardType; /*!< Carries information about card type */ + __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */ + __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */ + __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */ + __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */ + __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */ + __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */ + __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */ + +}HAL_SD_CardStatusTypedef; +/** + * @} + */ + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SD_Exported_Constants Exported Constants + * @{ + */ + +#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */ + +/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition + * @{ + */ +#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */ +#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */ +#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */ +#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */ +#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */ +#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */ +#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */ +#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */ +#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the + number of transferred bytes does not match the block length */ +#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */ +#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */ +#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */ +#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock + command or if there was an attempt to access a locked card */ +#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */ +#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */ +#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */ +#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */ +#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */ +#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */ +#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */ +#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */ +#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */ +#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */ +#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out + of erase sequence command was received */ +#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */ +#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */ +#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */ +#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */ +#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */ +#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */ +#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */ +#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */ +#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration + * @{ + */ +#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */ +#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */ +#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */ +#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */ +#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */ +#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */ +#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */ + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards + * @{ + */ +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */ +#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */ +#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards + and <104Mo/s for SDR104, Spec version 3.01 */ +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ + +#define CARD_SDSC ((uint32_t)0x00000000U) +#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) +#define CARD_SECURED ((uint32_t)0x00000003U) + +/** + * @} + */ + +/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version + * @{ + */ +#define CARD_V1_X ((uint32_t)0x00000000U) +#define CARD_V2_X ((uint32_t)0x00000001U) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup SD_Exported_macros SD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ + +#if !defined(STM32L4R5xx) && !defined(STM32L4R7xx) && !defined(STM32L4R9xx) && !defined(STM32L4S5xx) && !defined(STM32L4S7xx) && !defined(STM32L4S9xx) +/** + * @brief Enable the SD device. + * @retval None + */ +#define __HAL_SD_ENABLE(__HANDLE__) __SDMMC_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the SD device. + * @retval None + */ +#define __HAL_SD_DISABLE(__HANDLE__) __SDMMC_DISABLE((__HANDLE__)->Instance) + +/** + * @brief Enable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_SD_DMA_ENABLE(__HANDLE__) __SDMMC_DMA_ENABLE((__HANDLE__)->Instance) + +/** + * @brief Disable the SDMMC DMA transfer. + * @retval None + */ +#define __HAL_SD_DMA_DISABLE(__HANDLE__) __SDMMC_DMA_DISABLE((__HANDLE__)->Instance) +#endif /* !STM32L4R5xx && !STM32L4R7xx && !STM32L4R9xx && !STM32L4S5xx && !STM32L4S7xx && !STM32L4S9xx */ + +/** + * @brief Enable the SD device interrupt. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @retval None + */ +#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Disable the SD device interrupt. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @retval None + */ +#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Check whether the specified SD flag is set or not. + * @param __HANDLE__: SD Handle + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_CMDACT: Command transfer in progress + * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty + * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full + * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full + * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full + * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty + * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_CPSMACT: Command path state machine active + * @arg SDMMC_FLAG_DPSMACT: Data path state machine active + * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @arg SDMMC_FLAG_TXACT: Data transmit in progress + * @arg SDMMC_FLAG_RXACT: Data receive in progress + * @arg SDMMC_FLAG_TXDAVL: Data available in transmit FIFO + * @arg SDMMC_FLAG_RXDAVL: Data available in receive FIFO + * @retval The new state of SD FLAG (SET or RESET). + */ +#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Clear the SD's pending flags. + * @param __HANDLE__: SD Handle + * @param __FLAG__: specifies the flag to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed) + * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) + * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout + * @arg SDMMC_FLAG_DTIMEOUT: Data timeout + * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error + * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error + * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed) + * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required) + * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed) + * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero) + * @arg SDMMC_FLAG_DHOLD: Data transfer Hold + * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12 + * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected + * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received + * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout + * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion + * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure + * @arg SDMMC_FLAG_IDMATE: IDMA transfer error + * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete + * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) + * @retval None + */ +#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) + +/** + * @brief Check whether the specified SD interrupt has occurred or not. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the SDMMC interrupt source to check. + * This parameter can be one of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt + * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt + * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt + * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt + * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt + * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt + * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_DPSMACT: Data path state machine active interrupt + * @arg SDMMC_IT_CPSMACT: Command path state machine active interrupt + * @arg SDMMC_IT_BUSYD0: Inverted value of SDMMC_D0 line (Busy) + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMATE: IDMA transfer error interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt + * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt + * @arg SDMMC_IT_RXACT: Data receive in progress interrupt + * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt + * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt + * @retval The new state of SD IT (SET or RESET). + */ +#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @brief Clear the SD's interrupt pending bits. + * @param __HANDLE__: SD Handle + * @param __INTERRUPT__: specifies the interrupt pending bit to clear. + * This parameter can be one or a combination of the following values: + * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt + * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt + * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt + * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt + * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt + * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt + * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt + * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt + * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt + * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt + * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt + * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt + * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt + * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt + * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt + * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt + * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt + * @arg SDMMC_IT_IDMATE: IDMA transfer error interrupt + * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt + * @arg SDMMC_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt + * @retval None + */ +#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) + +/** + * @} + */ + +#if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) +/* Include SD HAL Extension module */ +#include "stm32l4xx_hal_sd_ex.h" +#endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup SD_Exported_Functions SD Exported Functions + * @{ + */ + +/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_Init (SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_InitCard (SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); +void HAL_SD_MspInit (SD_HandleTypeDef *hsd); +void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions + * @{ + */ +/* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SD_ReadBlocks (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_WriteBlocks (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout); +HAL_StatusTypeDef HAL_SD_Erase (SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd); +/* Non-Blocking mode: IT */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_IT (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_IT (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA (SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); +HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks); + +void HAL_SD_IRQHandler (SD_HandleTypeDef *hsd); + +/* Callback in non blocking modes (DMA) */ +void HAL_SD_TxCpltCallback (SD_HandleTypeDef *hsd); +void HAL_SD_RxCpltCallback (SD_HandleTypeDef *hsd); +void HAL_SD_ErrorCallback (SD_HandleTypeDef *hsd); +void HAL_SD_AbortCallback (SD_HandleTypeDef *hsd); + +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group4 SD card related functions + * @{ + */ +HAL_StatusTypeDef HAL_SD_SendSDStatus (SD_HandleTypeDef *hsd, uint32_t *pSDstatus); +HAL_SD_CardStateTypedef HAL_SD_GetCardState (SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_GetCardCID (SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypedef *pCID); +HAL_StatusTypeDef HAL_SD_GetCardCSD (SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypedef *pCSD); +HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pStatus); +HAL_StatusTypeDef HAL_SD_GetCardInfo (SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions + * @{ + */ +HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd); +uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management + * @{ + */ +HAL_StatusTypeDef HAL_SD_Abort (SD_HandleTypeDef *hsd); +HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd); +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/** @defgroup SD_Private_Types SD Private Types + * @{ + */ + +/** + * @} + */ + +/* Private defines -----------------------------------------------------------*/ +/** @defgroup SD_Private_Defines SD Private Defines + * @{ + */ + +/** + * @} + */ + +/* Private variables ---------------------------------------------------------*/ +/** @defgroup SD_Private_Variables SD Private Variables + * @{ + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup SD_Private_Constants SD Private Constants + * @{ + */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SD_Private_Macros SD Private Macros + * @{ + */ + +/** + * @} + */ + +/* Private functions prototypes ----------------------------------------------*/ +/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes + * @{ + */ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SD_Private_Functions SD Private Functions + * @{ + */ + +/** + * @} + */ + + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* SDMMC1 */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32L4xx_HAL_SD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/