The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Revision:
171:3a7713b1edbc
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L073RZ/TOOLCHAIN_IAR/stm32l0xx.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,241 @@
+/**
+  ******************************************************************************
+  * @file    stm32l0xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M0+ Device Peripheral Access Layer Header File. 
+  *          This file contains all the peripheral register's definitions, bits 
+  *          definitions and memory mapping for STM32L0xx devices.            
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral's registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32l0xx
+  * @{
+  */
+    
+#ifndef __STM32L0xx_H
+#define __STM32L0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32L0)
+#define STM32L0
+#endif /* STM32L0 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+
+#if !defined (STM32L011xx) && !defined (STM32L021xx) && \
+    !defined (STM32L031xx) && !defined (STM32L041xx) && \
+    !defined (STM32L051xx) && !defined (STM32L052xx) && !defined (STM32L053xx) && \
+    !defined (STM32L061xx) && !defined (STM32L062xx) && !defined (STM32L063xx) && \
+    !defined (STM32L071xx) && !defined (STM32L072xx) && !defined (STM32L073xx) && \
+    !defined (STM32L081xx) && !defined (STM32L082xx) && !defined (STM32L083xx) \
+  /* #define STM32L011xx */
+  /* #define STM32L021xx */
+  /* #define STM32L031xx */   /*!< STM32L031C6, STM32L031E6, STM32L031F6, STM32L031G6, STM32L031K6 Devices */
+  /* #define STM32L041xx */   /*!< STM32L041C6, STM32L041E6, STM32L041F6, STM32L041G6, STM32L041K6 Devices */
+  /* #define STM32L051xx */   /*!< STM32L051K8, STM32L051C6, STM32L051C8, STM32L051R6, STM32L051R8 Devices */
+  /* #define STM32L052xx */   /*!< STM32L052K6, STM32L052K8, STM32L052C6, STM32L052C8, STM32L052R6, STM32L052R8 Devices */
+  /* #define STM32L053xx */   /*!< STM32L053C6, STM32L053C8, STM32L053R6, STM32L053R8 Devices */
+  /* #define STM32L061xx */   /*!< */
+  /* #define STM32L062xx */   /*!< STM32L062K8 */
+  /* #define STM32L063xx */   /*!< STM32L063C8, STM32L063R8 */ 
+  /* #define STM32L071xx */   /*!< */
+  /* #define STM32L072xx */   /*!< */
+  #define STM32L073xx   /*!< STM32L073V8, STM32L073VB, STM32L073RB, STM32L073VZ, STM32L073RZ Devices */
+  /* #define STM32L081xx */   /*!< */
+  /* #define STM32L082xx */   /*!< */
+  /* #define STM32L083xx */   /*!< */ 
+#endif
+   
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.7.1
+  */
+#define __STM32L0xx_CMSIS_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32L0xx_CMSIS_VERSION_SUB1   (0x07) /*!< [23:16] sub1 version */
+#define __STM32L0xx_CMSIS_VERSION_SUB2   (0x02) /*!< [15:8]  sub2 version */
+#define __STM32L0xx_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32L0xx_CMSIS_VERSION        ((__STM32L0xx_CMSIS_VERSION_MAIN     << 24)\
+                                         |(__STM32L0xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32L0xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32L0xx_CMSIS_VERSION_RC))
+                                             
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32L011xx)
+  #include "stm32l011xx.h"
+#elif defined(STM32L021xx)
+  #include "stm32l021xx.h"
+#elif defined(STM32L031xx)
+  #include "stm32l031xx.h"
+#elif defined(STM32L041xx)
+  #include "stm32l041xx.h"
+#elif defined(STM32L051xx)
+  #include "stm32l051xx.h"
+#elif defined(STM32L052xx)
+  #include "stm32l052xx.h"
+#elif defined(STM32L053xx)
+  #include "stm32l053xx.h"
+#elif defined(STM32L062xx)
+  #include "stm32l062xx.h"
+#elif defined(STM32L063xx)
+  #include "stm32l063xx.h"
+#elif defined(STM32L061xx)
+  #include "stm32l061xx.h"
+#elif defined(STM32L071xx)
+  #include "stm32l071xx.h"
+#elif defined(STM32L072xx)
+  #include "stm32l072xx.h"
+#elif defined(STM32L073xx)
+  #include "stm32l073xx.h"
+#elif defined(STM32L082xx)
+  #include "stm32l082xx.h"
+#elif defined(STM32L083xx)
+  #include "stm32l083xx.h"
+#elif defined(STM32L081xx)
+  #include "stm32l081xx.h"
+#else
+ #error "Please select first the target STM32L0xx device used in your application (in stm32l0xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32l0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32L0xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/