Diff: TARGET_NUCLEO_F746ZG/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

Child:

172:65be27845400

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F746ZG/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,373 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2018, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ALT0  = 0x100,
+    ALT1  = 0x200,
+    ALT2  = 0x300,
+    ALT3  = 0x400
+} ALTx;
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_0_ALT0 = PA_0 | ALT0,
+    PA_0_ALT1 = PA_0 | ALT1,
+    PA_1  = 0x01,
+    PA_1_ALT0 = PA_1 | ALT0,
+    PA_1_ALT1 = PA_1 | ALT1,
+    PA_2  = 0x02,
+    PA_2_ALT0 = PA_2 | ALT0,
+    PA_2_ALT1 = PA_2 | ALT1,
+    PA_3  = 0x03,
+    PA_3_ALT0 = PA_3 | ALT0,
+    PA_3_ALT1 = PA_3 | ALT1,
+    PA_4  = 0x04,
+    PA_4_ALT0 = PA_4 | ALT0,
+    PA_5  = 0x05,
+    PA_5_ALT0 = PA_5 | ALT0,
+    PA_6  = 0x06,
+    PA_6_ALT0 = PA_6 | ALT0,
+    PA_7  = 0x07,
+    PA_7_ALT0 = PA_7 | ALT0,
+    PA_7_ALT1 = PA_7 | ALT1,
+    PA_7_ALT2 = PA_7 | ALT2,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+    PA_15_ALT0 = PA_15 | ALT0,
+
+    PB_0  = 0x10,
+    PB_0_ALT0 = PB_0 | ALT0,
+    PB_0_ALT1 = PB_0 | ALT1,
+    PB_1  = 0x11,
+    PB_1_ALT0 = PB_1 | ALT0,
+    PB_1_ALT1 = PB_1 | ALT1,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_3_ALT0 = PB_3 | ALT0,
+    PB_4  = 0x14,
+    PB_4_ALT0 = PB_4 | ALT0,
+    PB_4_ALT1 = PB_4 | ALT1,
+    PB_5  = 0x15,
+    PB_5_ALT0 = PB_5 | ALT0,
+    PB_5_ALT1 = PB_5 | ALT1,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_8_ALT0 = PB_8 | ALT0,
+    PB_8_ALT1 = PB_8 | ALT1,
+    PB_9  = 0x19,
+    PB_9_ALT0 = PB_9 | ALT0,
+    PB_9_ALT1 = PB_9 | ALT1,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_14_ALT0 = PB_14 | ALT0,
+    PB_14_ALT1 = PB_14 | ALT1,
+    PB_15 = 0x1F,
+    PB_15_ALT0 = PB_15 | ALT0,
+    PB_15_ALT1 = PB_15 | ALT1,
+
+    PC_0  = 0x20,
+    PC_0_ALT0 = PC_0 | ALT0,
+    PC_0_ALT1 = PC_0 | ALT1,
+    PC_1  = 0x21,
+    PC_1_ALT0 = PC_1 | ALT0,
+    PC_1_ALT1 = PC_1 | ALT1,
+    PC_2  = 0x22,
+    PC_2_ALT0 = PC_2 | ALT0,
+    PC_2_ALT1 = PC_2 | ALT1,
+    PC_3  = 0x23,
+    PC_3_ALT0 = PC_3 | ALT0,
+    PC_3_ALT1 = PC_3 | ALT1,
+    PC_4  = 0x24,
+    PC_4_ALT0 = PC_4 | ALT0,
+    PC_5  = 0x25,
+    PC_5_ALT0 = PC_5 | ALT0,
+    PC_6  = 0x26,
+    PC_6_ALT0 = PC_6 | ALT0,
+    PC_7  = 0x27,
+    PC_7_ALT0 = PC_7 | ALT0,
+    PC_8  = 0x28,
+    PC_8_ALT0 = PC_8 | ALT0,
+    PC_9  = 0x29,
+    PC_9_ALT0 = PC_9 | ALT0,
+    PC_10 = 0x2A,
+    PC_11 = 0x2B,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PF_0  = 0x50,
+    PF_1  = 0x51,
+    PF_2  = 0x52,
+    PF_3  = 0x53,
+    PF_4  = 0x54,
+    PF_5  = 0x55,
+    PF_6  = 0x56,
+    PF_7  = 0x57,
+    PF_8  = 0x58,
+    PF_9  = 0x59,
+    PF_10 = 0x5A,
+    PF_11 = 0x5B,
+    PF_12 = 0x5C,
+    PF_13 = 0x5D,
+    PF_14 = 0x5E,
+    PF_15 = 0x5F,
+
+    PG_0  = 0x60,
+    PG_1  = 0x61,
+    PG_2  = 0x62,
+    PG_3  = 0x63,
+    PG_4  = 0x64,
+    PG_5  = 0x65,
+    PG_6  = 0x66,
+    PG_7  = 0x67,
+    PG_8  = 0x68,
+    PG_9  = 0x69,
+    PG_10 = 0x6A,
+    PG_11 = 0x6B,
+    PG_12 = 0x6C,
+    PG_13 = 0x6D,
+    PG_14 = 0x6E,
+    PG_15 = 0x6F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+    ADC_VBAT = 0xF2,
+
+    // Arduino connector namings
+    A0          = PA_3,
+    A1          = PC_0,
+    A2          = PC_3,
+    A3          = PF_3,
+    A4          = PF_5,
+    A5          = PF_10,
+    D0          = PG_9,
+    D1          = PG_14,
+    D2          = PF_15,
+    D3          = PE_13,
+    D4          = PF_14,
+    D5          = PE_11,
+    D6          = PE_9,
+    D7          = PF_13,
+    D8          = PF_12,
+    D9          = PD_15,
+    D10         = PD_14,
+    D11         = STM32_D11_SPI_ETHERNET_PIN, /* config in targets.json file */
+    D12         = PA_6,
+    D13         = PA_5,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX = PD_8,
+#endif
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX = PD_9,
+#endif
+
+    // Generic signals namings
+    LED1        = PB_0,  // LD1 = GREEN
+    LED2        = PB_7,  // Blue
+    LED3        = PB_14, // Red
+    LED4        = PB_0,
+    USER_BUTTON = PC_13,
+    // Standardized button names
+    BUTTON1 = USER_BUTTON,
+    SERIAL_TX   = STDIO_UART_TX, // Virtual Com Port
+    SERIAL_RX   = STDIO_UART_RX, // Virtual Com Port
+    USBTX       = STDIO_UART_TX, // Virtual Com Port
+    USBRX       = STDIO_UART_RX, // Virtual Com Port
+    I2C_SCL     = D15,
+    I2C_SDA     = D14,
+    SPI_MOSI    = D11,
+    SPI_MISO    = D12,
+    SPI_SCK     = D13,
+    SPI_CS      = D10,
+    PWM_OUT     = D9,
+
+    /**** USB pins ****/
+    USB_OTG_FS_DM = PA_11,
+    USB_OTG_FS_DP = PA_12,
+    USB_OTG_FS_ID = PA_10,
+    USB_OTG_FS_SOF = PA_8,
+    USB_OTG_FS_VBUS = PA_9,
+    USB_OTG_HS_DM = PB_14,
+    USB_OTG_HS_DP = PB_15,
+    USB_OTG_HS_ID = PB_12,
+    USB_OTG_HS_SOF = PA_4,
+    USB_OTG_HS_ULPI_CK = PA_5,
+    USB_OTG_HS_ULPI_D0 = PA_3,
+    USB_OTG_HS_ULPI_D1 = PB_0,
+    USB_OTG_HS_ULPI_D2 = PB_1,
+    USB_OTG_HS_ULPI_D3 = PB_10,
+    USB_OTG_HS_ULPI_D4 = PB_11,
+    USB_OTG_HS_ULPI_D5 = PB_12,
+    USB_OTG_HS_ULPI_D6 = PB_13,
+    USB_OTG_HS_ULPI_D7 = PB_5,
+    USB_OTG_HS_ULPI_DIR = PC_2,
+    USB_OTG_HS_ULPI_NXT = PC_3,
+    USB_OTG_HS_ULPI_STP = PC_0,
+    USB_OTG_HS_VBUS = PB_13,
+
+    /**** ETHERNET pins ****/
+    ETH_COL = PA_3,
+    ETH_CRS = PA_0,
+    ETH_CRS_DV = PA_7,
+    ETH_MDC = PC_1,
+    ETH_MDIO = PA_2,
+    ETH_PPS_OUT = PG_8,
+    ETH_PPS_OUT_ALT0 = PB_5,
+    ETH_REF_CLK = PA_1,
+    ETH_RXD0 = PC_4,
+    ETH_RXD1 = PC_5,
+    ETH_RXD2 = PB_0,
+    ETH_RXD3 = PB_1,
+    ETH_RX_CLK = PA_1,
+    ETH_RX_DV = PA_7,
+    ETH_RX_ER = PB_10,
+    ETH_TXD0 = PB_12,
+    ETH_TXD0_ALT0 = PG_13,
+    ETH_TXD1 = PB_13,
+    ETH_TXD1_ALT0 = PG_14,
+    ETH_TXD2 = PC_2,
+    ETH_TXD3 = PE_2,
+    ETH_TXD3_ALT0 = PB_8,
+    ETH_TX_CLK = PC_3,
+    ETH_TX_EN = PB_11,
+    ETH_TX_EN_ALT0 = PG_11,
+
+    /**** OSCILLATOR pins ****/
+    RCC_OSC32_IN = PC_14,
+    RCC_OSC32_OUT = PC_15,
+    RCC_OSC_IN = PH_0,
+    RCC_OSC_OUT = PH_1,
+
+    /**** DEBUG pins ****/
+    SYS_JTCK_SWCLK = PA_14,
+    SYS_JTDI = PA_15,
+    SYS_JTDO_SWO = PB_3,
+    SYS_JTMS_SWDIO = PA_13,
+    SYS_JTRST = PB_4,
+    SYS_TRACECLK = PE_2,
+    SYS_TRACED0 = PE_3,
+    SYS_TRACED0_ALT0 = PC_1,
+    SYS_TRACED0_ALT1 = PG_13,
+    SYS_TRACED1 = PE_4,
+    SYS_TRACED1_ALT0 = PC_8,
+    SYS_TRACED1_ALT1 = PG_14,
+    SYS_TRACED2 = PE_5,
+    SYS_TRACED2_ALT0 = PD_2,
+    SYS_TRACED3 = PE_6,
+    SYS_TRACED3_ALT0 = PC_12,
+    SYS_WKUP1 = PA_0,
+    SYS_WKUP2 = PA_2,
+    SYS_WKUP3 = PC_1,
+    SYS_WKUP4 = PC_13,
+
+    /**** QSPI pins ****/
+    QSPI_FLASH1_IO0 = PD_11,
+    QSPI_FLASH1_IO1 = PD_12,
+    QSPI_FLASH1_IO2 = PE_2,
+    QSPI_FLASH1_IO3 = PD_13,
+    QSPI_FLASH1_SCK = PB_2,
+    QSPI_FLASH1_CSN = PB_6,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif