Diff: TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_cortex.h

Revision:

171:3a7713b1edbc

Parent:

168:b9e159c1930a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_cortex.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,656 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_ll_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX LL module.
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The LL CORTEX driver contains a set of generic APIs that can be
+    used by user:
+      (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+          functions
+      (+) Low power mode configuration (SCB register of Cortex-MCU)
+      (+) MPU API to configure and enable regions
+          (MPU services provided only on some devices)
+      (+) API to access to MCU info (CPUID register)
+      (+) API to enable fault handler (SHCSR accesses)
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_CORTEX_H
+#define __STM32F3xx_LL_CORTEX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX_LL CORTEX
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
+  * @{
+  */
+#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8     0x00000000U                 /*!< AHB clock divided by 8 selected as SysTick clock source.*/
+#define LL_SYSTICK_CLKSOURCE_HCLK          SysTick_CTRL_CLKSOURCE_Msk  /*!< AHB clock selected as SysTick clock source. */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
+  * @{
+  */
+#define LL_HANDLER_FAULT_USG               SCB_SHCSR_USGFAULTENA_Msk              /*!< Usage fault */
+#define LL_HANDLER_FAULT_BUS               SCB_SHCSR_BUSFAULTENA_Msk              /*!< Bus fault */
+#define LL_HANDLER_FAULT_MEM               SCB_SHCSR_MEMFAULTENA_Msk              /*!< Memory management fault */
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+
+/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
+  * @{
+  */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE     0x00000000U                                       /*!< Disable NMI and privileged SW access */
+#define LL_MPU_CTRL_HARDFAULT_NMI          MPU_CTRL_HFNMIENA_Msk                             /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
+#define LL_MPU_CTRL_PRIVILEGED_DEFAULT     MPU_CTRL_PRIVDEFENA_Msk                           /*!< Enable privileged software access to default memory map */
+#define LL_MPU_CTRL_HFNMI_PRIVDEF          (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
+  * @{
+  */
+#define LL_MPU_REGION_NUMBER0              0x00U /*!< REGION Number 0 */
+#define LL_MPU_REGION_NUMBER1              0x01U /*!< REGION Number 1 */
+#define LL_MPU_REGION_NUMBER2              0x02U /*!< REGION Number 2 */
+#define LL_MPU_REGION_NUMBER3              0x03U /*!< REGION Number 3 */
+#define LL_MPU_REGION_NUMBER4              0x04U /*!< REGION Number 4 */
+#define LL_MPU_REGION_NUMBER5              0x05U /*!< REGION Number 5 */
+#define LL_MPU_REGION_NUMBER6              0x06U /*!< REGION Number 6 */
+#define LL_MPU_REGION_NUMBER7              0x07U /*!< REGION Number 7 */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
+  * @{
+  */
+#define LL_MPU_REGION_SIZE_32B             (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64B             (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128B            (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256B            (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512B            (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1KB             (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2KB             (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4KB             (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8KB             (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16KB            (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32KB            (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64KB            (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128KB           (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256KB           (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512KB           (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1MB             (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2MB             (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4MB             (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_8MB             (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_16MB            (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_32MB            (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_64MB            (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_128MB           (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_256MB           (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_512MB           (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_1GB             (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_2GB             (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
+#define LL_MPU_REGION_SIZE_4GB             (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
+  * @{
+  */
+#define LL_MPU_REGION_NO_ACCESS            (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
+#define LL_MPU_REGION_PRIV_RW              (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
+#define LL_MPU_REGION_PRIV_RW_URO          (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
+#define LL_MPU_REGION_FULL_ACCESS          (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
+#define LL_MPU_REGION_PRIV_RO              (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
+#define LL_MPU_REGION_PRIV_RO_URO          (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
+  * @{
+  */
+#define LL_MPU_TEX_LEVEL0                  (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
+#define LL_MPU_TEX_LEVEL1                  (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
+#define LL_MPU_TEX_LEVEL2                  (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
+#define LL_MPU_TEX_LEVEL4                  (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
+  * @{
+  */
+#define LL_MPU_INSTRUCTION_ACCESS_ENABLE   0x00U            /*!< Instruction fetches enabled */
+#define LL_MPU_INSTRUCTION_ACCESS_DISABLE  MPU_RASR_XN_Msk  /*!< Instruction fetches disabled*/
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_SHAREABLE            MPU_RASR_S_Msk   /*!< Shareable memory attribute */
+#define LL_MPU_ACCESS_NOT_SHAREABLE        0x00U            /*!< Not Shareable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_CACHEABLE            MPU_RASR_C_Msk   /*!< Cacheable memory attribute */
+#define LL_MPU_ACCESS_NOT_CACHEABLE        0x00U            /*!< Not Cacheable memory attribute */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
+  * @{
+  */
+#define LL_MPU_ACCESS_BUFFERABLE           MPU_RASR_B_Msk   /*!< Bufferable memory attribute */
+#define LL_MPU_ACCESS_NOT_BUFFERABLE       0x00U            /*!< Not Bufferable memory attribute */
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
+  * @{
+  */
+
+/**
+  * @brief  This function checks if the Systick counter flag is active or not.
+  * @note   It can be used in timeout function on application side.
+  * @rmtoll STK_CTRL     COUNTFLAG     LL_SYSTICK_IsActiveCounterFlag
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
+{
+  return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
+}
+
+/**
+  * @brief  Configures the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_SetClkSource
+  * @param  Source This parameter can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
+{
+  if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
+  {
+    SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+  else
+  {
+    CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+  }
+}
+
+/**
+  * @brief  Get the SysTick clock source
+  * @rmtoll STK_CTRL     CLKSOURCE     LL_SYSTICK_GetClkSource
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
+  *         @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
+{
+  return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
+}
+
+/**
+  * @brief  Enable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_EnableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
+{
+  SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Disable SysTick exception request
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_DisableIT
+  * @retval None
+  */
+__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
+{
+  CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
+}
+
+/**
+  * @brief  Checks if the SYSTICK interrupt is enabled or disabled.
+  * @rmtoll STK_CTRL     TICKINT       LL_SYSTICK_IsEnabledIT
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
+{
+  return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
+  * @{
+  */
+
+/**
+  * @brief  Processor uses sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleep(void)
+{
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Processor uses deep sleep as its low power mode
+  * @rmtoll SCB_SCR      SLEEPDEEP     LL_LPM_EnableDeepSleep
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
+{
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+}
+
+/**
+  * @brief  Configures sleep-on-exit when returning from Handler mode to Thread mode.
+  * @note   Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
+  *         empty main application.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_EnableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Do not sleep when returning to Thread mode.
+  * @rmtoll SCB_SCR      SLEEPONEXIT   LL_LPM_DisableSleepOnExit
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief  Enabled events and all interrupts, including disabled interrupts, can wakeup the
+  *         processor.
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_EnableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
+{
+  /* Set SEVEONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief  Only enabled interrupts or events can wakeup the processor, disabled interrupts are
+  *         excluded
+  * @rmtoll SCB_SCR      SEVEONPEND    LL_LPM_DisableEventOnPend
+  * @retval None
+  */
+__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
+{
+  /* Clear SEVEONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
+  * @{
+  */
+
+/**
+  * @brief  Enable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_EnableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
+{
+  /* Enable the system handler fault */
+  SET_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @brief  Disable a fault in System handler control register (SHCSR)
+  * @rmtoll SCB_SHCSR    MEMFAULTENA   LL_HANDLER_DisableFault
+  * @param  Fault This parameter can be a combination of the following values:
+  *         @arg @ref LL_HANDLER_FAULT_USG
+  *         @arg @ref LL_HANDLER_FAULT_BUS
+  *         @arg @ref LL_HANDLER_FAULT_MEM
+  * @retval None
+  */
+__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
+{
+  /* Disable the system handler fault */
+  CLEAR_BIT(SCB->SHCSR, Fault);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
+  * @{
+  */
+
+/**
+  * @brief  Get Implementer code
+  * @rmtoll SCB_CPUID    IMPLEMENTER   LL_CPUID_GetImplementer
+  * @retval Value should be equal to 0x41 for ARM
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
+}
+
+/**
+  * @brief  Get Variant number (The r value in the rnpn product revision identifier)
+  * @rmtoll SCB_CPUID    VARIANT       LL_CPUID_GetVariant
+  * @retval Value between 0 and 255 (0x0: revision 0)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
+}
+
+/**
+  * @brief  Get Constant number
+  * @rmtoll SCB_CPUID    ARCHITECTURE  LL_CPUID_GetConstant
+  * @retval Value should be equal to 0xF for Cortex-M4 devices
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
+}
+
+/**
+  * @brief  Get Part number
+  * @rmtoll SCB_CPUID    PARTNO        LL_CPUID_GetParNo
+  * @retval Value should be equal to 0xC24 for Cortex-M4
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
+}
+
+/**
+  * @brief  Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
+  * @rmtoll SCB_CPUID    REVISION      LL_CPUID_GetRevision
+  * @retval Value between 0 and 255 (0x1: patch 1)
+  */
+__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
+{
+  return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
+}
+
+/**
+  * @}
+  */
+
+#if __MPU_PRESENT
+/** @defgroup CORTEX_LL_EF_MPU MPU
+  * @{
+  */
+
+/**
+  * @brief  Enable MPU with input options
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Enable
+  * @param  Options This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
+  *         @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
+  *         @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
+  *         @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
+{
+  /* Enable the MPU*/
+  WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
+  /* Ensure MPU settings take effects */
+  __DSB();
+  /* Sequence instruction fetches using update settings */
+  __ISB();
+}
+
+/**
+  * @brief  Disable MPU
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_Disable
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_Disable(void)
+{
+  /* Make sure outstanding transfers are done */
+  __DMB();
+  /* Disable MPU*/
+  WRITE_REG(MPU->CTRL, 0U);
+}
+
+/**
+  * @brief  Check if MPU is enabled or not
+  * @rmtoll MPU_CTRL     ENABLE        LL_MPU_IsEnabled
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
+{
+  return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
+}
+
+/**
+  * @brief  Enable a MPU region
+  * @rmtoll MPU_RASR     ENABLE        LL_MPU_EnableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Enable the MPU region */
+  SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @brief  Configure and enable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     REGION        LL_MPU_ConfigRegion\n
+  *         MPU_RBAR     ADDR          LL_MPU_ConfigRegion\n
+  *         MPU_RASR     XN            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     AP            LL_MPU_ConfigRegion\n
+  *         MPU_RASR     S             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     C             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     B             LL_MPU_ConfigRegion\n
+  *         MPU_RASR     SIZE          LL_MPU_ConfigRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @param  Address Value of region base address
+  * @param  SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
+  * @param  Attributes This parameter can be a combination of the following values:
+  *         @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
+  *           or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
+  *           or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
+  *           or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
+  *           or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
+  *           or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
+  *         @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
+  *           or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
+  *         @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
+  *         @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or  @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
+  *         @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
+  *         @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
+  *         @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Set base address */
+  WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
+  /* Configure MPU */
+  WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
+}
+
+/**
+  * @brief  Disable a region
+  * @rmtoll MPU_RNR      REGION        LL_MPU_DisableRegion\n
+  *         MPU_RASR     ENABLE        LL_MPU_DisableRegion
+  * @param  Region This parameter can be one of the following values:
+  *         @arg @ref LL_MPU_REGION_NUMBER0
+  *         @arg @ref LL_MPU_REGION_NUMBER1
+  *         @arg @ref LL_MPU_REGION_NUMBER2
+  *         @arg @ref LL_MPU_REGION_NUMBER3
+  *         @arg @ref LL_MPU_REGION_NUMBER4
+  *         @arg @ref LL_MPU_REGION_NUMBER5
+  *         @arg @ref LL_MPU_REGION_NUMBER6
+  *         @arg @ref LL_MPU_REGION_NUMBER7
+  * @retval None
+  */
+__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
+{
+  /* Set Region number */
+  WRITE_REG(MPU->RNR, Region);
+  /* Disable the MPU region */
+  CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
+}
+
+/**
+  * @}
+  */
+
+#endif /* __MPU_PRESENT */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_CORTEX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/