The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Revision:
171:3a7713b1edbc
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC546XX/TOOLCHAIN_IAR/fsl_gint.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,248 @@
+/*
+ * The Clear BSD License
+ * Copyright (c) 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided
+ * that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of the copyright holder nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_GINT_H_
+#define _FSL_GINT_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup gint_driver
+ * @{
+ */
+
+/*! @file */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+#define FSL_GINT_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) /*!< Version 2.0.0. */
+/*@}*/
+
+/*! @brief GINT combine inputs type */
+typedef enum _gint_comb
+{
+    kGINT_CombineOr = 0U, /*!< A grouped interrupt is generated when any one of the enabled inputs is active */
+    kGINT_CombineAnd = 1U /*!< A grouped interrupt is generated when all enabled inputs are active */
+} gint_comb_t;
+
+/*! @brief GINT trigger type */
+typedef enum _gint_trig
+{
+    kGINT_TrigEdge = 0U, /*!< Edge triggered based on polarity */
+    kGINT_TrigLevel = 1U /*!< Level triggered based on polarity */
+} gint_trig_t;
+
+/* @brief GINT port type */
+typedef enum _gint_port
+{
+    kGINT_Port0 = 0U,
+    kGINT_Port1 = 1U,
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 2U)
+    kGINT_Port2 = 2U,
+#endif
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 3U)
+    kGINT_Port3 = 3U,
+#endif
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 4U)
+    kGINT_Port4 = 4U,
+#endif
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 5U)
+    kGINT_Port5 = 5U,
+#endif
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 6U)
+    kGINT_Port6 = 6U,
+#endif
+#if defined(FSL_FEATURE_GINT_PORT_COUNT) && (FSL_FEATURE_GINT_PORT_COUNT > 7U)
+    kGINT_Port7 = 7U,
+#endif
+} gint_port_t;
+
+/*! @brief GINT Callback function. */
+typedef void (*gint_cb_t)(void);
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief	Initialize GINT peripheral.
+
+ * This function initializes the GINT peripheral and enables the clock.
+ *
+ * @param base Base address of the GINT peripheral.
+ *
+ * @retval None.
+ */
+void GINT_Init(GINT_Type *base);
+
+/*!
+ * @brief	Setup GINT peripheral control parameters.
+
+ * This function sets the control parameters of GINT peripheral.
+ *
+ * @param base Base address of the GINT peripheral.
+ * @param comb Controls if the enabled inputs are logically ORed or ANDed for interrupt generation.
+ * @param trig Controls if the enabled inputs are level or edge sensitive based on polarity.
+ * @param callback This function is called when configured group interrupt is generated.
+ *
+ * @retval None.
+ */
+void GINT_SetCtrl(GINT_Type *base, gint_comb_t comb, gint_trig_t trig, gint_cb_t callback);
+
+/*!
+ * @brief	Get GINT peripheral control parameters.
+
+ * This function returns the control parameters of GINT peripheral.
+ *
+ * @param base Base address of the GINT peripheral.
+ * @param comb Pointer to store combine input value.
+ * @param trig Pointer to store trigger value.
+ * @param callback Pointer to store callback function.
+ *
+ * @retval None.
+ */
+void GINT_GetCtrl(GINT_Type *base, gint_comb_t *comb, gint_trig_t *trig, gint_cb_t *callback);
+
+/*!
+ * @brief	Configure GINT peripheral pins.
+
+ * This function enables and controls the polarity of enabled pin(s) of a given port.
+ *
+ * @param base Base address of the GINT peripheral.
+ * @param port Port number.
+ * @param polarityMask Each bit position selects the polarity of the corresponding enabled pin.
+ *        0 = The pin is active LOW. 1 = The pin is active HIGH.
+ * @param enableMask Each bit position selects if the corresponding pin is enabled or not.
+ *        0 = The pin is disabled. 1 = The pin is enabled.
+ *
+ * @retval None.
+ */
+void GINT_ConfigPins(GINT_Type *base, gint_port_t port, uint32_t polarityMask, uint32_t enableMask);
+
+/*!
+ * @brief	Get GINT peripheral pin configuration.
+
+ * This function returns the pin configuration of a given port.
+ *
+ * @param base Base address of the GINT peripheral.
+ * @param port Port number.
+ * @param polarityMask Pointer to store the polarity mask Each bit position indicates the polarity of the corresponding
+ enabled pin.
+ *        0 = The pin is active LOW. 1 = The pin is active HIGH.
+ * @param enableMask Pointer to store the enable mask. Each bit position indicates if the corresponding pin is enabled
+ or not.
+ *        0 = The pin is disabled. 1 = The pin is enabled.
+ *
+ * @retval None.
+ */
+void GINT_GetConfigPins(GINT_Type *base, gint_port_t port, uint32_t *polarityMask, uint32_t *enableMask);
+
+/*!
+ * @brief	Enable callback.
+
+ * This function enables the interrupt for the selected GINT peripheral. Although the pin(s) are monitored
+ * as soon as they are enabled, the callback function is not enabled until this function is called.
+ *
+ * @param base Base address of the GINT peripheral.
+ *
+ * @retval None.
+ */
+void GINT_EnableCallback(GINT_Type *base);
+
+/*!
+ * @brief	Disable callback.
+
+ * This function disables the interrupt for the selected GINT peripheral. Although the pins are still
+ * being monitored but the callback function is not called.
+ *
+ * @param base Base address of the peripheral.
+ *
+ * @retval None.
+ */
+void GINT_DisableCallback(GINT_Type *base);
+
+/*!
+ * @brief	Clear GINT status.
+
+ * This function clears the GINT status bit.
+ *
+ * @param base Base address of the GINT peripheral.
+ *
+ * @retval None.
+ */
+static inline void GINT_ClrStatus(GINT_Type *base)
+{
+    base->CTRL |= GINT_CTRL_INT_MASK;
+}
+
+/*!
+ * @brief	Get GINT status.
+
+ * This function returns the GINT status.
+ *
+ * @param base Base address of the GINT peripheral.
+ *
+ * @retval status = 0 No group interrupt request.  = 1 Group interrupt request active.
+ */
+static inline uint32_t GINT_GetStatus(GINT_Type *base)
+{
+    return (base->CTRL & GINT_CTRL_INT_MASK);
+}
+
+/*!
+ * @brief	Deinitialize GINT peripheral.
+
+ * This function disables the GINT clock.
+ *
+ * @param base Base address of the GINT peripheral.
+ *
+ * @retval None.
+ */
+void GINT_Deinit(GINT_Type *base);
+
+#ifdef __cplusplus
+}
+#endif
+
+/*@}*/
+
+#endif /* _FSL_GINT_H_ */