The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_KW41Z/TOOLCHAIN_IAR/PinNames.h
- Revision:
- 171:3a7713b1edbc
- Child:
- 172:65be27845400
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_KW41Z/TOOLCHAIN_IAR/PinNames.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,125 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define GPIO_PORT_SHIFT 12 + +typedef enum { + PTA0 = (0 << GPIO_PORT_SHIFT | 0), + PTA1 = (0 << GPIO_PORT_SHIFT | 1), + PTA2 = (0 << GPIO_PORT_SHIFT | 2), + PTA16 = (0 << GPIO_PORT_SHIFT | 16), + PTA17 = (0 << GPIO_PORT_SHIFT | 17), + PTA18 = (0 << GPIO_PORT_SHIFT | 18), + PTA19 = (0 << GPIO_PORT_SHIFT | 19), + PTB0 = (1 << GPIO_PORT_SHIFT | 0), + PTB1 = (1 << GPIO_PORT_SHIFT | 1), + PTB2 = (1 << GPIO_PORT_SHIFT | 2), + PTB3 = (1 << GPIO_PORT_SHIFT | 3), + PTB16 = (1 << GPIO_PORT_SHIFT | 16), + PTB17 = (1 << GPIO_PORT_SHIFT | 17), + PTB18 = (1 << GPIO_PORT_SHIFT | 18), + PTC1 = (2 << GPIO_PORT_SHIFT | 1), + PTC2 = (2 << GPIO_PORT_SHIFT | 2), + PTC3 = (2 << GPIO_PORT_SHIFT | 3), + PTC4 = (2 << GPIO_PORT_SHIFT | 4), + PTC5 = (2 << GPIO_PORT_SHIFT | 5), + PTC6 = (2 << GPIO_PORT_SHIFT | 6), + PTC7 = (2 << GPIO_PORT_SHIFT | 7), + PTC16 = (2 << GPIO_PORT_SHIFT | 16), + PTC17 = (2 << GPIO_PORT_SHIFT | 17), + PTC18 = (2 << GPIO_PORT_SHIFT | 18), + PTC19 = (2 << GPIO_PORT_SHIFT | 19), + + LED_RED = PTC1, + LED_GREEN = PTA19, + LED_BLUE = PTA18, + + // mbed original LED naming + LED1 = LED_RED, + LED2 = LED_GREEN, + LED3 = LED_BLUE, + LED4 = LED_RED, + + //Push buttons + SW3 = PTC4, + SW4 = PTC5, + // Standardized button names + BUTTON1 = SW3, + BUTTON2 = SW4, + + // USB Pins + USBTX = PTC7, + USBRX = PTC6, + + // Arduino Headers + D0 = PTC6, + D1 = PTC7, + D2 = PTC19, + D3 = PTC16, + D4 = PTC4, + D5 = PTC17, + D6 = PTC18, + D7 = PTA1, + D8 = PTA0, + D9 = PTC1, + D10 = PTA19, + D11 = PTA16, + D12 = PTA17, + D13 = PTA18, + D14 = PTC3, + D15 = PTC2, + + I2C_SCL = D15, + I2C_SDA = D14, + + DAC0_OUT = PTB18, + + A1 = DAC0_OUT, + A2 = PTB2, + A3 = PTB3, + A4 = PTB1, + A5 = PTB0, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 2, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif