Diff: TARGET_KW24D/TOOLCHAIN_GCC_ARM/PinNames.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KW24D/TOOLCHAIN_GCC_ARM/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,139 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define GPIO_PORT_SHIFT 12
+
+typedef enum {
+    PTA0  = (0 << GPIO_PORT_SHIFT | 0 ),
+    PTA1  = (0 << GPIO_PORT_SHIFT | 1 ),
+    PTA2  = (0 << GPIO_PORT_SHIFT | 2 ),
+    PTA3  = (0 << GPIO_PORT_SHIFT | 3 ),
+    PTA4  = (0 << GPIO_PORT_SHIFT | 4 ),
+    PTA18 = (0 << GPIO_PORT_SHIFT | 18),
+    PTA19 = (0 << GPIO_PORT_SHIFT | 19),
+    PTB3  = (1 << GPIO_PORT_SHIFT | 3),
+    PTB10 = (1 << GPIO_PORT_SHIFT | 10),
+    PTB11 = (1 << GPIO_PORT_SHIFT | 11),
+    PTB16 = (1 << GPIO_PORT_SHIFT | 16),
+    PTB17 = (1 << GPIO_PORT_SHIFT | 17),
+    PTB19 = (1 << GPIO_PORT_SHIFT | 19),
+    PTC0  = (2 << GPIO_PORT_SHIFT | 0 ),
+    PTC1  = (2 << GPIO_PORT_SHIFT | 1 ),
+    PTC3  = (2 << GPIO_PORT_SHIFT | 3 ),
+    PTC4  = (2 << GPIO_PORT_SHIFT | 4 ),
+    PTC5  = (2 << GPIO_PORT_SHIFT | 5 ),
+    PTC6  = (2 << GPIO_PORT_SHIFT | 6 ),
+    PTC7  = (2 << GPIO_PORT_SHIFT | 7 ),
+    PTD1  = (3 << GPIO_PORT_SHIFT | 1 ),
+    PTD2  = (3 << GPIO_PORT_SHIFT | 2 ),
+    PTD3  = (3 << GPIO_PORT_SHIFT | 3 ),
+    PTD4  = (3 << GPIO_PORT_SHIFT | 4 ),
+    PTD5  = (3 << GPIO_PORT_SHIFT | 5 ),
+    PTD6  = (3 << GPIO_PORT_SHIFT | 6 ),
+    PTD7  = (3 << GPIO_PORT_SHIFT | 7 ),
+    PTE0  = (4 << GPIO_PORT_SHIFT | 0 ),
+    PTE1  = (4 << GPIO_PORT_SHIFT | 1 ),
+    PTE2  = (4 << GPIO_PORT_SHIFT | 2 ),
+    PTE3  = (4 << GPIO_PORT_SHIFT | 3 ),
+    PTE4  = (4 << GPIO_PORT_SHIFT | 4 ),
+    PTE16 = (4 << GPIO_PORT_SHIFT | 16),
+    PTE17 = (4 << GPIO_PORT_SHIFT | 17),
+    PTE18 = (4 << GPIO_PORT_SHIFT | 18),
+    PTE19 = (4 << GPIO_PORT_SHIFT | 19),
+
+    LED_RED   = PTD4,
+    LED_GREEN = PTD5,
+    LED_BLUE  = PTD6,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = PTD7,
+
+    //Push buttons
+    SW1 = PTE4,
+    SW2 = PTE3,
+    SW3 = PTD1,
+    SW4 = PTA19,
+    // Standardized button names
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
+    BUTTON4 = SW4,
+
+    // USB Pins
+    USBTX = PTE0,
+    USBRX = PTE1,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+
+    // Arduino Headers
+    D0 = PTD7,
+    D1 = PTD6,
+    D2 = PTD5,
+    D3 = PTD4,
+    D4 = NC,
+    D5 = NC,
+    D6 = PTE4,
+    D7 = PTD1,
+    D8 = PTA19,
+    D9 = PTA18,
+    D10 = PTC4,
+    D11 = PTC6,
+    D12 = PTC7,
+    D13 = PTC5,
+    D14 = PTD3,
+    D15 = PTD2,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    A0 = NC,
+    A1 = NC,
+    A2 = NC,
+    A3 = NC,
+    A4 = NC,
+    A5 = NC
+} PinName;
+
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif